# # Copyright (C) 2021 The Android Open-Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # TARGET_KERNEL_DIR ?= device/google/bluejay-kernel TARGET_BOARD_KERNEL_HEADERS := device/google/bluejay-kernel/kernel-headers $(call inherit-product-if-exists, vendor/google_devices/bluejay/prebuilts/device-vendor-bluejay.mk) $(call inherit-product-if-exists, vendor/google_devices/gs101/prebuilts/device-vendor.mk) $(call inherit-product-if-exists, vendor/google_devices/gs101/proprietary/device-vendor.mk) $(call inherit-product-if-exists, vendor/google_devices/bluejay/proprietary/device-vendor.mk) $(call inherit-product-if-exists, vendor/google_devices/bluejay/proprietary/bluejay/device-vendor-bluejay.mk) $(call inherit-product-if-exists, vendor/google_devices/bluejay/proprietary/WallpapersBluejay.mk) GOODIX_CONFIG_BUILD_VERSION := g7_trusty DEVICE_PACKAGE_OVERLAYS += device/google/bluejay/bluejay/overlay include device/google/gs101/fingerprint/extension/fingerprint.extension.mk include device/google/bluejay-sepolicy/bluejay-sepolicy.mk include device/google/bluejay/audio/bluejay/audio-tables.mk include device/google/gs101/device-shipping-common.mk include device/google/gs101/fingerprint/udfps_common.mk include device/google/gs101/telephony/pktrouter.mk include hardware/google/pixel/vibrator/cs40l26/device.mk include device/google/gs101/bluetooth/bluetooth.mk ifeq ($(filter factory_bluejay, $(TARGET_PRODUCT)),) include device/google/gs101/fingerprint/udfps_shipping.mk else include device/google/gs101/fingerprint/udfps_factory.mk endif $(call soong_config_set,lyric,tuning_product,bluejay) $(call soong_config_set,google3a_config,target_device,bluejay) # Init files PRODUCT_COPY_FILES += \ device/google/bluejay/conf/init.blueport.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.blueport.rc \ device/google/bluejay/conf/init.bluejay.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.bluejay.rc # Recovery files PRODUCT_COPY_FILES += \ device/google/gs101/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.bluejay.rc # insmod files PRODUCT_COPY_FILES += \ device/google/bluejay/init.insmod.bluejay.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.bluejay.cfg # Thermal Config PRODUCT_COPY_FILES += \ device/google/bluejay/thermal_info_config_bluejay.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json # Power HAL config PRODUCT_COPY_FILES += \ device/google/bluejay/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json # Camera PRODUCT_COPY_FILES += \ device/google/bluejay/media_profiles_bluejay.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml PRODUCT_PROPERTY_OVERRIDES += \ persist.vendor.camera.extended_launch_boost=1 \ persist.vendor.camera.raise_buf_allocation_priority=1 \ persist.vendor.camera.fixed_fps_range_boost=1 # Display Config PRODUCT_COPY_FILES += \ device/google/bluejay/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \ device/google/bluejay/display_golden_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_cal0.pb # Media Performance Class 12 PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=31 # NFC PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \ frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \ frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \ device/google/bluejay/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ device/google/bluejay/nfc/libnfc-hal-st-GB17L.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-GB17L.conf \ device/google/bluejay/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf PRODUCT_PACKAGES += \ NfcNci \ Tag \ android.hardware.nfc@1.2-service.st # SecureElement PRODUCT_PACKAGES += \ android.hardware.secure_element@1.2-service-gto PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \ frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \ device/google/bluejay/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf DEVICE_MANIFEST_FILE += \ device/google/bluejay/nfc/manifest_nfc.xml \ device/google/bluejay/nfc/manifest_se_bluejay.xml # PowerStats HAL PRODUCT_SOONG_NAMESPACES += \ device/google/bluejay/powerstats/bluejay \ device/google/bluejay # Increment the SVN for any official public releases PRODUCT_VENDOR_PROPERTIES += \ ro.vendor.build.svn=15 # DCK properties based on target PRODUCT_PROPERTY_OVERRIDES += \ ro.gms.dck.eligible_wcc=2 # Trusty liboemcrypto.so PRODUCT_SOONG_NAMESPACES += vendor/google_devices/bluejay/prebuilts # Display LBE PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1 # Bluetooth Hal Extension test tools PRODUCT_PACKAGES_DEBUG += \ sar_test \ hci_inject # Config of primary display frames to reach LHBM peak brightness PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=2 # Bluetooth Tx power caps for bluejay PRODUCT_COPY_FILES += \ $(LOCAL_PATH)/bluetooth_power_limits.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \ $(LOCAL_PATH)/bluetooth_power_limits_GB17L_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \ $(LOCAL_PATH)/bluetooth_power_limits_GX7AS_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_CA.csv \ $(LOCAL_PATH)/bluetooth_power_limits_GB62Z_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GB62Z_US.csv \ $(LOCAL_PATH)/bluetooth_power_limits_GX7AS_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GX7AS_US.csv \ $(LOCAL_PATH)/bluetooth_power_limits_G1AZG_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G1AZG_EU.csv \ $(LOCAL_PATH)/bluetooth_power_limits_GB62Z_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GB62Z_EU.csv # Bluetooth PRODUCT_PRODUCT_PROPERTIES += \ persist.bluetooth.a2dp_aac.vbr_supported=true # Bluetooth HAL PRODUCT_PACKAGES += \ bt_vendor.conf # Set zram size PRODUCT_VENDOR_PROPERTIES += \ vendor.zram.size=2g # Enable camera 1080P 60FPS binning mode PRODUCT_VENDOR_PROPERTIES += \ persist.vendor.camera.1080P_60fps_binning=true # Enable camera exif model/make reporting PRODUCT_VENDOR_PROPERTIES += \ persist.vendor.camera.exif_reveal_make_model=true # Disable rear light sensor probing explicitly PRODUCT_VENDOR_PROPERTIES += \ persist.vendor.camera.rls_supported=false # Fingerprint antispoof property PRODUCT_PRODUCT_PROPERTIES +=\ persist.vendor.fingerprint.disable.fake.override=none # Fingerprint als feed forward PRODUCT_VENDOR_PROPERTIES += \ persist.vendor.udfps.als_feed_forward_supported=true \ persist.vendor.udfps.lhbm_controlled_in_hal_supported=true # Fingerprint MAX auth latency PRODUCT_VENDOR_PROPERTIES += \ vendor.gf.debug.timer.threshold=1,400,400,400,600,600,600 # Hide cutout overlays PRODUCT_PACKAGES += \ NoCutoutOverlay \ AvoidAppsInCutoutOverlay # SKU specific RROs PRODUCT_PACKAGES += \ SettingsOverlayGB17L \ SettingsOverlayG1AZG \ SettingsOverlayGB62Z \ SettingsOverlayGX7AS # Set support hide display cutout feature PRODUCT_PRODUCT_PROPERTIES += \ ro.support_hide_display_cutout=true # Set support one-handed mode PRODUCT_PRODUCT_PROPERTIES += \ ro.support_one_handed_mode=true # GPS xml ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) PRODUCT_COPY_FILES += \ device/google/bluejay/gps.xml.b3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml else PRODUCT_COPY_FILES += \ device/google/bluejay/gps_user.xml.b3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml endif # This device is shipped with 32 (Android S V2) PRODUCT_SHIPPING_API_LEVEL := 32 # Vibrator HAL PRODUCT_VENDOR_PROPERTIES += \ ro.vendor.vibrator.hal.supported_primitives=243 # Device features PRODUCT_COPY_FILES += \ frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml # Keyboard bottom padding in dp for portrait mode and height ratio PRODUCT_PRODUCT_PROPERTIES += \ ro.com.google.ime.kb_pad_port_b=6.4 \ ro.com.google.ime.height_ratio=1.05