crosshatch: Reset to wahoo on master.

commit dc78ac4aaa64e427c0f5c0672dc22939a9a7b85f
Merge: 820b880 163a21c
Author: Glenn Kasten <gkasten@google.com>
Date:   Tue Jun 27 15:12:54 2017 +0000

    Merge "Report feature android.software.midi to enable testing" into oc-dr1-dev am: 614e203677
    am: 163a21c15f

    Change-Id: I18876c0ce8e0435fdcb947d475c66fe7fae57da1

Change-Id: Id08e99f0603407199020818485eb29d92d421c43

3 files changed, 389 insertions, 0 deletions

diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
new file mode 100755
index 00000000..e8e68ed0
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -0,0 +1,330 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2016, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+
+    <!-- If this is true, the screen will fade off. -->
+    <bool name="config_animateScreenLights">false</bool>
+
+    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
+         autodetected from the Configuration. -->
+    <bool name="config_showNavigationBar">true</bool>
+
+    <!-- When true use the linux /dev/input/event subsystem to detect the switch changes
+         on the headphone/microphone jack. When false use the older uevent framework. -->
+    <bool name="config_useDevInputEventForAudioJack">true</bool>
+
+    <!-- Indicate whether closing the lid causes the device to go to sleep and opening
+         it causes the device to wake up.
+         The default is false. -->
+    <bool name="config_lidControlsSleep">true</bool>
+
+    <!-- Indicate whether to allow the device to suspend when the screen is off
+         due to the proximity sensor.  This resource should only be set to true
+         if the sensor HAL correctly handles the proximity sensor as a wake-up source.
+         Otherwise, the device may fail to wake out of suspend reliably.
+         The default is false. -->
+    <bool name="config_suspendWhenScreenOffDueToProximity">true</bool>
+
+    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
+         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
+    <bool name="config_automatic_brightness_available">true</bool>
+
+    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
+         for debouncing the light sensor.  Different constants are used to debounce the light sensor
+         when adapting to brighter or darker environments.  This parameter controls how quickly
+         brightness changes occur in response to an observed change in light level that exceeds the
+         hysteresis threshold. -->
+    <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer>
+    <integer name="config_autoBrightnessDarkeningLightDebounce">4000</integer>
+
+    <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
+    <bool name="config_unplugTurnsOnScreen">true</bool>
+
+    <!-- Enable Night display, which requires HWC 2.0. -->
+    <bool name="config_nightDisplayAvailable">true</bool>
+
+    <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently
+         in hardware. -->
+    <bool name="config_setColorTransformAccelerated">true</bool>
+
+    <!-- Boolean indicating if restoring network selection should be skipped -->
+    <!-- The restoring is handled by modem if it is true -->
+    <bool translatable="false" name="skip_restoring_network_selection">true</bool>
+
+    <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
+    <bool name="config_cellBroadcastAppLinks">true</bool>
+
+    <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
+    <bool name="config_intrusiveNotificationLed">true</bool>
+
+    <!-- Default color for notification LED is white. -->
+    <color name="config_defaultNotificationColor">#ffffffff</color>
+
+    <!-- Default LED on time for notification LED in milliseconds. -->
+    <integer name="config_defaultNotificationLedOn">1000</integer>
+
+    <!-- Default LED off time for notification LED in milliseconds. -->
+    <integer name="config_defaultNotificationLedOff">9000</integer>
+
+    <!-- reference volume index for music stream to limit headphone volume and display warning -->
+    <integer name="config_safe_media_volume_index">4</integer>
+
+    <!--  Whether Multiuser UI should be shown -->
+    <bool name="config_enableMultiUserUI">true</bool>
+
+    <!--  Maximum number of supported users -->
+    <integer name="config_multiuserMaximumUsers">4</integer>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         USB interfaces.  If the device doesn't want to support tething over USB this should
+         be empty.  An example would be "usb.*" -->
+    <string-array translatable="false" name="config_tether_usb_regexs">
+        <item>"usb\\d"</item>
+        <item>"rndis\\d"</item>
+    </string-array>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
+         should be empty.  An example would be "softap.*" -->
+    <string-array translatable="false" name="config_tether_wifi_regexs">
+        <item>"wlan0"</item>
+        <item>"softap.*"</item>
+    </string-array>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         bluetooth interfaces.  If the device doesn't want to support tethering over bluetooth this
+         should be empty. -->
+    <string-array translatable="false" name="config_tether_bluetooth_regexs">
+           <item>"bt-pan"</item>
+    </string-array>
+
+    <!-- Max number of scan filters supported by blutooth controller. 0 if the
+         device does not support hardware scan filters-->
+    <integer translatable="false" name="config_bluetooth_max_scan_filters">1</integer>
+
+    <!-- Max number of advertisers supported by bluetooth controller. 0 if the
+         device does not support multiple advertisement-->
+    <integer translatable="false" name="config_bluetooth_max_advertisers">4</integer>
+
+    <!-- Operating voltage for bluetooth controller. 0 by default-->
+    <integer translatable="false" name="config_bluetooth_operating_voltage_mv">3300</integer>
+
+    <!-- Boolean indicating if current platform supports HFP inband ringing -->
+    <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool>
+
+    <!-- Array of allowable ConnectivityManager network types for tethering -->
+    <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
+         [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
+    <integer-array translatable="false" name="config_tether_upstream_types">
+        <item>0</item>
+        <item>1</item>
+        <item>5</item>
+        <item>7</item>
+    </integer-array>
+
+    <!-- This string array should be overridden by the device to present a list of network
+         attributes.  This is used by the connectivity manager to decide which networks can coexist
+         based on the hardware -->
+    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
+         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
+    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
+         before automatically restore the default connection.  Set -1 if the connection
+         does not require auto-restore. -->
+    <!-- the 6th element indicates boot-time dependency-met value. -->
+    <string-array translatable="false" name="networkAttributes">
+        <item>"wifi,1,1,1,-1,true"</item>
+        <item>"mobile,0,0,0,-1,true"</item>
+        <item>"mobile_mms,2,0,2,60000,true"</item>
+        <item>"mobile_supl,3,0,2,60000,true"</item>
+        <item>"mobile_dun,4,0,2,60000,true"</item>
+        <item>"mobile_hipri,5,0,3,60000,true"</item>
+        <item>"mobile_fota,10,0,2,60000,true"</item>
+        <item>"mobile_ims,11,0,2,60000,true"</item>
+        <item>"mobile_cbs,12,0,2,60000,true"</item>
+        <item>"mobile_ia,14,0,2,-1,true"</item>
+        <item>"bluetooth,7,7,2,-1,true"</item>
+        <item>"ethernet,9,9,9,-1,true"</item>
+        <item>"mobile_emergency,15,0,2,-1,true</item>
+    </string-array>
+
+    <!-- This string array should be overridden by the device to present a list of radio
+         attributes.  This is used by the connectivity manager to decide which networks can coexist
+         based on the hardware -->
+    <!-- An Array of "[ConnectivityManager connectionType],
+                      [# simultaneous connection types]"  -->
+    <string-array translatable="false" name="radioAttributes">
+        <item>"1,1"</item>
+        <item>"0,1"</item>
+        <item>"7,1"</item>
+        <item>"9,1"</item>
+    </string-array>
+
+    <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
+    <bool translatable="false" name="config_wifi_dual_band_support">true</bool>
+
+    <!-- Boolean indicating whether 802.11r Fast BSS Transition is enabled on this platform -->
+    <bool translatable="false" name="config_wifi_fast_bss_transition_enabled">true</bool>
+
+    <!-- Boolean indicating whether the wifi chipset has background scan support -->
+    <bool translatable="false" name="config_wifi_background_scan_support">true</bool>
+
+    <!-- Integer thresholds, do not connect to APs with RSSI lower than these values  -->
+    <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-82</integer>
+    <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-85</integer>
+
+
+    <!-- Vibrator pattern for feedback about a long screen/key press -->
+    <integer-array name="config_longPressVibePattern">
+        <item>8</item>
+    </integer-array>
+
+    <!-- Make things go fast -->
+    <bool name="config_ui_enableFadingMarquee">false</bool>
+
+    <!-- Wifi driver supports batched scan -->
+    <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool>
+
+    <!-- Boolean indicating whether or not to revert to default country code when cellular
+    radio is unable to find any MCC information to infer wifi country code from -->
+    <bool translatable="false" name="config_wifi_revert_country_code_on_cellular_loss">true</bool>
+
+    <!-- Boolean indicating whether or not wifi should turn off when emergency call is made -->
+    <bool translatable="false" name="config_wifi_turn_off_during_emergency_call">true</bool>
+
+   <!-- Enable doze mode
+         ComponentName of a dream to show whenever the system would otherwise have gone to sleep. -->
+    <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
+
+    <!-- If true, the doze component is not started until after the screen has been turned off
+         and the screen off animation has been performed. -->
+    <bool name="config_dozeAfterScreenOff">true</bool>
+
+    <!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. -->
+    <bool name="config_dozePulsePickup">true</bool>
+
+    <!-- Type of the double tap sensor. Empty if double tap is not supported. -->
+    <string name="config_dozeDoubleTapSensorType" translatable="false">com.google.sensor.double_touch</string>
+
+    <!-- Whether the always on display mode is available. -->
+    <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
+
+    <!-- ImsService package name to bind to by default, if config_dynamic_bind_ims is true -->
+    <string name="config_ims_package">org.codeaurora.ims</string>
+
+    <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically -->
+    <bool name="config_dynamic_bind_ims">true</bool>
+
+    <!-- Specifies whether to decouple the auto-suspend state of the device from the display on/off state. -->
+    <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool>
+
+    <!-- Specifies whether to decouple the interactive state of the device from the display on/off state. -->
+    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
+
+    <!-- Is the device capable of hot swapping an UICC Card -->
+    <bool name="config_hotswapCapable">true</bool>
+
+    <!-- Flag specifying whether VoLTE is availasble on device -->
+    <bool name="config_device_volte_available">true</bool>
+
+    <!-- Flag specifying whether VoLTE is available on device -->
+    <bool name="config_device_vt_available">true</bool>
+
+    <!-- Enable video pause workaround when enabling/disabling the camera. -->
+    <bool name="config_useVideoPauseWorkaround">true</bool>
+
+    <!-- Flag specifying whether WFC over IMS is availasble on device -->
+    <bool name="config_device_wfc_ims_available">true</bool>
+
+    <!-- Configure mobile tcp buffer sizes in the form:
+         rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
+         If no value is found for the rat-name in use, the system default will be applied.
+    -->
+    <string-array name="config_mobile_tcp_buffers">
+        <item>umts:131072,262144,1452032,4096,16384,399360</item>
+        <item>hspa:131072,262144,2441216,4096,16384,399360</item>
+        <item>hsupa:131072,262144,2441216,4096,16384,399360</item>
+        <item>hsdpa:131072,262144,2441216,4096,16384,399360</item>
+        <item>hspap:131072,262144,2441216,4096,16384,399360</item>
+        <item>edge:16384,32768,131072,4096,16384,65536</item>
+        <item>gprs:4096,8192,24576,4096,8192,24576</item>
+        <item>1xrtt:16384,32768,131070,4096,16384,102400</item>
+        <item>evdo:131072,262144,1048576,4096,16384,524288</item>
+        <item>lte:524288,1048576,8388608,262144,524288,4194304</item>
+    </string-array>
+
+    <!-- Configure wifi tcp buffersizes in the form:
+         rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
+    <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,8388608,262144,524288,4194304</string>
+
+    <!-- Idle Receive current for wifi radio. 0 by default-->
+    <integer translatable="false" name="config_wifi_idle_receive_cur_ma">1</integer>
+
+    <!-- Rx current for wifi radio. 0 by default-->
+    <integer translatable="false" name="config_wifi_active_rx_cur_ma">100</integer>
+
+    <!-- Tx current for wifi radio. 0 by default-->
+    <integer translatable="false" name="config_wifi_tx_cur_ma">250</integer>
+
+    <!-- Operating volatage for wifi radio. 0 by default-->
+    <integer translatable="false" name="config_wifi_operating_voltage_mv">3800</integer>
+
+    <!-- Config SoftAP 2G channel list -->
+    <string  translatable="false" name="config_wifi_framework_sap_2G_channel_list">6</string>
+
+    <!-- Config determines whether to update phone object when voice registration
+         state changes. Voice radio tech change will always trigger an update of
+         phone object irrespective of this config -->
+    <bool name="config_switch_phone_on_voice_reg_state_change">false</bool>
+
+
+    <!-- Use ERI text for network name on CDMA LTE -->
+        <bool name="config_LTE_eri_for_network_name">false</bool>
+
+    <!-- Default list of files pinned by the Pinner Service -->
+    <string-array translatable="false" name="config_defaultPinnerServiceFiles">
+        <item>"/system/framework/arm64/boot-framework.oat"</item>
+        <item>"/system/framework/arm64/boot-framework.vdex"</item>
+        <item>"/system/framework/oat/arm64/services.odex"</item>
+        <item>"/system/framework/oat/arm64/services.vdex"</item>
+        <item>"/system/framework/arm64/boot.oat"</item>
+        <item>"/system/framework/arm64/boot.vdex"</item>
+        <item>"/system/framework/arm64/boot-core-libart.oat"</item>
+        <item>"/system/framework/arm64/boot-core-libart.vdex"</item>
+    </string-array>
+
+    <!-- Should the pinner service pin the Camera application? -->
+    <bool name="config_pinnerCameraApp">true</bool>
+
+    <!-- Enable system navigation keys. -->
+    <bool name="config_supportSystemNavigationKeys">true</bool>
+
+    <!-- If this is true, device supports Sustained Performance Mode. -->
+    <bool name="config_sustainedPerformanceModeSupported">true</bool>
+
+    <!-- True if Unprocessed audio source supports the required frequency range and level -->
+    <bool name="config_supportAudioSourceUnprocessed">true</bool>
+
+    <!-- Colon separated list of package names that should be granted DND access -->
+    <string name="config_defaultDndAccessPackages" translatable="false">com.google.android.GoogleCamera:com.google.intelligence.sense</string>
+
+    <!-- Enables or disables haptic effect when the text insertion/selection handle is moved
+         manually by the user. -->
+    <bool name="config_enableHapticTextHandle">true</bool>
+</resources>
diff --git a/overlay/frameworks/base/core/res/res/values/strings.xml b/overlay/frameworks/base/core/res/res/values/strings.xml
new file mode 100644
index 00000000..e1daaadc
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/values/strings.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2017, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds.  Do not translate. -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Do not translate. Default access point SSID used for tethering -->
+    <string name="wifi_tether_configure_ssid_default" translatable="false">Pixel</string>
+</resources>
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
new file mode 100644
index 00000000..c03b29d9
--- /dev/null
+++ b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2017, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds. -->
+<resources>
+    <!-- Doze: does this device support STATE_DOZE?  -->
+    <bool name="doze_display_state_supported">true</bool>
+
+    <!-- Doze: does this device support STATE_DOZE_SUSPEND?  -->
+    <bool name="doze_suspend_display_state_supported">false</bool>
+
+    <!-- Doze: can we assume the pickup sensor includes a proximity check? -->
+    <bool name="doze_pickup_performs_proximity_check">true</bool>
+
+    <!-- Doze: whether the double tap sensor reports 2D touch coordinates -->
+    <bool name="doze_double_tap_reports_touch_coordinates">true</bool>
+</resources>