From 804880c5520db46ecfb1353e1b2bce7b70b3a51c Mon Sep 17 00:00:00 2001
From: Ecco Park <eccopark@google.com>
Date: Thu, 11 May 2017 15:10:46 -0700
Subject: wifi: use the WCNSS_qcom_cfg.ini only for crosshatch

Bug: 38198219

Change-Id: I238ceb4ca49e20fba08293e673ee1e75f9770d83
Signed-off-by: Ecco Park <eccopark@google.com>
---
 WCNSS_qcom_cfg.ini | 593 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 593 insertions(+)
 create mode 100644 WCNSS_qcom_cfg.ini

(limited to 'WCNSS_qcom_cfg.ini')

diff --git a/WCNSS_qcom_cfg.ini b/WCNSS_qcom_cfg.ini
new file mode 100644
index 00000000..35dec212
--- /dev/null
+++ b/WCNSS_qcom_cfg.ini
@@ -0,0 +1,593 @@
+# This file allows user to override the factory
+# defaults for the WLAN Driver
+
+#############################################
+# STA related general configurations
+#############################################
+# Assigned MAC Addresses - This will be used until NV items are in place
+# Each byte of MAC address is represented in Hex format as XX
+Intf0MacAddress=000AF58989FF
+Intf1MacAddress=000AF58989FE
+Intf2MacAddress=000AF58989FD
+Intf3MacAddress=000AF58989FC
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+gChannelBondingMode24GHz=0
+
+#Enable Keep alive with non-zero period value
+gStaKeepAlivePeriod=90
+
+# Maximum MPDU length (VHT only. Valid values: 0->3895 octets, 1->7991 octets, 2->11454 octets)
+gVhtMpduLen=2
+
+# 0 for OLPC 1 for CLPC and SCPC
+gEnableCloseLoop=1
+
+ImplicitQosIsEnabled=0
+
+# Enable Tx beamforming in VHT20MHz
+# Valid values are 0,1. If commented out, the default value is 0.
+# 0=disable, 1=enable
+gEnableTxBFin20MHz=1
+
+#Enable/Disable SU Tx beamformer support.
+gEnableTxSUBeamformer=1
+
+# 1=enable tx STBC; 0=disable
+gEnableTXSTBC=1
+
+# 1=enable STBC; 0=disable STBC
+gEnableRXSTBC=1
+
+# 1=enable rx LDPC; 0=disable
+gEnableRXLDPC=1
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+# RTS threshold
+RTSThreshold=1048576
+
+# 802.11d support
+g11dSupportEnabled=0
+
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
+# 7 = 11b only 8 = 11ac only.
+gDot11Mode=0
+
+# Enable Rx handling options
+# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
+rx_mode=4
+
+#Enable VHT on 2.4Ghz
+gEnableVhtFor24GHzBand=1
+
+# Regulatory Setting; 0=STRICT; 1=CUSTOM
+gRegulatoryChangeCountry=1
+
+# userspace country code setting shld take priority
+gCountryCodePriority=1
+
+# Enable/Disable LPASS support
+# 0 to disable, 1 to enable
+gEnableLpassSupport=1
+
+# Enable(1)/Disable(0) SIFS burst
+gEnableSifsBurst=1
+
+# Tx Chain Mask for CCK
+gCckChainMaskEnable=1
+
+# Tx Chain Mask for 1SS
+gTxChainMask1ss=0
+
+# TPC power
+gSelfGenFrmPwr=3
+
+################ NAN feature set start ###################
+# Enable or Disable NAN
+# 1=Enable (default), 0=Disable
+gEnableNanSupport=1
+################ NAN feature set end #####################
+
+gIgnorePeerHTopMode=1
+gIgnorePeerErpInfo=1
+
+# 802.11n Protection flag
+gEnableApProt=1
+
+# Fixed Rate
+gFixedRate=0
+
+# Intra-BSS forward
+gDisableIntraBssFwd=0
+
+# WMM Enable/Disable
+WmmIsEnabled=0
+
+# 802.11h support
+g11hSupportEnabled=1
+
+#Short Guard Interval Enable/disable
+gShortGI20Mhz=1
+gShortGI40Mhz=1
+
+#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
+gWlanAutoShutdown=0
+
+#Preferred band (both or 2.4 only or 5 only)
+BandCapability=0
+
+gVhtChannelWidth=2
+
+# Enable Tx beamforming
+gTxBFEnable=1
+
+# Set txchainmask and rxchainmask
+# These parameters are used only if gEnable2x2 is 0
+# Valid values are 1,2
+# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
+# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
+gSetTxChainmask1x1=1
+gSetRxChainmask1x1=1
+
+#If set to 0, MCC is not allowed.
+gEnableMCCMode=1
+
+# MCC to SCC Switch mode: 0-Disable 1-Enable 2-Force SCC if same band
+gWlanMccToSccSwitchMode = 0
+
+# Maximum Receive AMPDU size (VHT only. Valid values: 0->8k 1->16k 2->32k 3->64k 4->128k)
+gVhtAmpduLenExponent=7
+
+# Maximum number of concurrent connections
+gMaxConcurrentActiveSessions=3
+
+# Radar PRI multiplier
+gDFSradarMappingPriMultiplier=4
+
+# Enable or Disable Multi-user MIMO
+# 1=Enable (default), 0=Disable
+gEnableMuBformee=1
+
+# Enable to check FW hash if secure FW feature is enabled. It's for defconfig
+# builds only since it will be ignored in performance/release builds.
+gEnableFWHashCheck=1
+
+# Enable or Disable MCC Adaptive Scheduler at the FW
+# 1=Enable (default), 0=Disable
+gEnableMCCAdaptiveScheduler=1
+
+# Disable/Enable GreenAP
+# 0 to disable, 1 to enable, default: 1
+gEnableGreenAp=0
+
+################ Datapath feature set Begin ################
+# Bus bandwidth threshold values in terms of number of packets
+gBusBandwidthHighThreshold=2000
+gBusBandwidthMediumThreshold=500
+gBusBandwidthLowThreshold=150
+
+# Bus bandwidth compute timeout value in ms
+gBusBandwidthComputeInterval=100
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+# VHT Tx/Rx MCS values for 2x2
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gEnable2x2=1
+gVhtRxMCS2x2=2
+gVhtTxMCS2x2=2
+
+#IPA config is a bit mask and following are the configurations.
+#bit0 IPA Enable
+#bit1 IPA PRE Filter enable
+#bit2 IPv6 enable
+#bit3 IPA Resource Manager (RM) enable
+#bit4 IPA Clock scaling enable
+#bit5 IPA uC ENABLE
+#bit6 IPA uC STA ENABLE
+#bit8 IPA Real Time Debugging
+gIPAConfig=0x7d
+gIPADescSize=800
+
+# Enable/Disable RX full reorder offload
+gReorderOffloadSupported=1
+
+# Enable CE classification
+# 1 - enable(default)  0 - disable
+gCEClassifyEnable=1
+
+# Enable(Tx) fastpath for data traffic.
+# 1 - enable(default)  0 - disable
+gEnableFastPath=1
+
+# This flag enables IP, TCP and UDP checksum offload
+# 1 - enable(default)  0 - disable
+gEnableIpTcpUdpChecksumOffload=1
+
+# Enable TCP Segmentation Offload
+# 1 - enable  0 - disable
+TSOEnable=1
+
+# Enable Large Recieve Offload
+# 1 - enable(default)  0 - disable
+LROEnable=1
+
+# Enable HT MPDU Density
+# 4 for 2 micro sec
+ght_mpdu_density=4
+
+# Enable flow steering to enable multiple CEs for Rx flows.
+# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
+# Parallel Rx paths.
+# 1 - enable 0 - disable(default)
+gEnableFlowSteering=1
+
+################ Datapath feature set End ################
+
+#############################################
+# SCAN related configurations
+#############################################
+# Enable/Disable Idle Scan
+gEnableIdleScan=0
+
+#Enable Scan Results Aging based on timer
+#Timer value is in seconds
+#If Set to 0 it will not enable the feature
+gScanAgingTime=0
+
+#Enable Scan Results Aging based on number of scans
+gScanResultAgeCount=1
+
+#Enable thermal mitigation
+gThermalMitigationEnable=0
+
+#List of Country codes for which 11ac needs to be disabled
+#Each country code must be delimited by comma(,)
+gListOfNon11acCountryCode=RU,UA,ZA
+
+#Maximum Channel time in msec
+gMaxMediumTime=6000
+
+# Scan Timing Parameters
+# gPassiveMaxChannelTime=110
+# gPassiveMinChannelTime=60
+gActiveMaxChannelTime=40
+gActiveMinChannelTime=20
+
+gPNOScanSupport=1
+
+# Perform PNO fast scan this many number of times
+gPNOScanTimerRepeatValue=6
+
+# PNO slow scan period = gPNOSlowScanMultiplier times PNO fast scan period
+# Example: fast scan period is passed from framework (default = 10 sec), then
+# PNO slow scan period = 60 sec.
+gPNOSlowScanMultiplier=6
+
+# Enable or Disable Extended Scan (GScan)
+# 1=Enable (default), 0=Disable
+gExtScanEnable=1
+
+#If set will start with active scan after driver load, otherwise will start with
+#passive scan to find out the domain
+gEnableBypass11d=1
+
+#If set to 0, will not scan DFS channels
+gEnableDFSChnlScan=1
+
+#Maxium Channel time in msec
+gMaxMediumTime = 6000
+
+adaptive_dwell_mode_enabled=1
+
+hostscan_adaptive_dwell_mode=1
+
+adapt_dwell_lpf_weight=80
+
+adapt_dwell_wifi_act_threshold=10
+
+
+#############################################
+# Power related configurations
+#############################################
+# Enable IMPS or not
+gEnableImps=1
+
+# Enable BMPS or not
+gEnableBmps=1
+
+# Increase sleep duration (seconds) during IMPS
+# 0 implies no periodic wake up from IMPS. Periodic wakeup is
+# unnecessary if Idle Scan is disabled.
+gImpsModSleepTime=0
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+InfraUapsdVoSrvIntv=0
+InfraUapsdViSrvIntv=0
+InfraUapsdBeSrvIntv=0
+InfraUapsdBkSrvIntv=0
+
+# Enable suspend or not
+# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
+gEnableSuspend=3
+
+#Enable Power Save offload
+gEnablePowerSaveOffload=2
+
+# Enable Runtime PM Feature.
+# Enabling this feature will put target wow and shutdown pcie link
+# when inactivity is detected in WLAN Driver.
+# This feature is inactive when beaconing interfaces are active with
+# clients associated.
+# 0 - disable
+# 1 - enable
+gRuntimePM=1
+
+# When gRuntimePM is disabled gRuntimeAutoTime won't take effect.
+# The Time is in msec.
+# 100 is min, 10000 is max, 500 is default.
+gRuntimePMDelay=500
+
+#Enable Power saving mechanism Based on Android Framework
+#If set to 0 Driver internally control the Power saving mechanism
+#If set to 1 Android Framwrok control the Power saving mechanism
+isAndroidPsEn=0
+
+beaconEarlyTerminationWakeInterval=3
+
+#Data Inactivity Timeout when in powersave (in ms)
+gDataInactivityTimeout=200
+
+# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
+gIbssTxSpEndInactivityTime=10
+
+gEnableModulatedDTIM=2
+gMaxLIModulatedDTIM=6
+
+#############################################
+# Roaming related configurations
+#############################################
+# CSR Roaming Enable(1) Disable(0)
+gRoamingTime=0
+
+# ESE Support and fast transition
+EseEnabled=1
+
+gNeighborLookupThreshold=76
+gNeighborReassocThreshold=81
+gNeighborScanTimerPeriod=200
+gNeighborScanChannelMinTime=20
+gNeighborScanChannelMaxTime=30
+gMaxNeighborReqTries=3
+
+# To enable, set gRoamIntraBand=1 (Roaming within band)
+# To disable, set gRoamIntraBand=0 (Roaming across band)
+gRoamIntraBand=0
+
+# Legacy (non-ESE, non-802.11r) Fast Roaming Support
+# To enable, set FastRoamEnabled=1
+# To disable, set FastRoamEnabled=0
+FastRoamEnabled=1
+
+#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
+#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
+#the RSSI of the new/roamable AP should be for roaming
+RoamRssiDiff=3
+
+# If the RSSI of any available candidate is better than currently associated
+# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without
+# registering for reassoc threshold).
+# NOTE: Value of 0 means that we would register for reassoc threshold.
+gImmediateRoamRssiDiff=10
+
+# 802.11K support
+gRrmEnable=1
+gRrmOperChanMax=8
+gRrmNonOperChanMax=8
+
+gEnableFastRoamInConcurrency=1
+
+# Enable/Disable Roaming Offload Support (a.k.a Key Management Offload)
+# 0 to disable, 1 to enable
+gRoamOffloadEnabled=1
+
+gAllowDFSChannelRoam=1
+
+#############################################
+# Offload related configurations
+#############################################
+# Beacon filtering frequency (unit in beacon intervals)
+gNthBeaconFilter=50
+
+# Enable WAPI or not
+# WAPIIsEnabled=0
+# Flags to filter Mcast abd Bcast RX packets.
+# Value 0: No filtering, 1: Filter all Multicast.
+# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
+McastBcastFilter=3
+
+#Flag to enable HostARPOffload feature or not
+hostArpOffload=1
+
+#Flag to enable TCPChkSumOffld feature or not
+gEnableTCPChkSumOffld=1
+
+#Flag to enable HostNSOffload feature or not
+hostNSOffload=1
+
+#Flag to enable IPChkSumOffld feature or not
+gEnableIPChecksumOffload=1
+
+# controlling the following offload patterns
+# through ini parameter. Default value is 1
+# to disable set it to zero. ssdp = 0
+# Setup multicast pattern for mDNS 224.0.0.251,
+# SSDP 239.255.255.250 and LLMNR 224.0.0.252
+ssdp = 0
+
+#Enable MC address filtering offload
+gMCAddrListEnable=1
+
+# Enable Active mode offload
+gActiveModeOffload=1
+
+# Enable Active mode offload
+gEnableActiveModeOffload=1
+
+# WOW Enable/Disable.
+# 0 - Disable both magic pattern match and pattern byte match.
+# 1 - Enable magic pattern match on all interfaces.
+# 2 - Enable pattern byte match on all interfaces.
+# 3 - Enable both magic patter and pattern byte match on all interfaces.
+# Default value of gEnableWoW is 3.
+# gEnableWoW=0
+
+
+#############################################
+# Logging related configurations
+#############################################
+gEnableLogp=1
+
+gEnableSelfRecovery=1
+
+#Enable firmware log
+gEnablefwlog=1
+# Additional firmware log levels
+gFwDebugLogLevel=4
+gFwDebugModuleLoglevel=1,0,2,0,4,0,5,0,6,0,7,4,8,0,9,0,11,0,13,0,17,0,18,0,19,0,27,0,29,0,31,0,35,0,36,0,38,0
+
+#Enable firmware uart print
+gEnablefwprint=0
+
+#############################################
+# TDLS related configurations
+#############################################
+# Enable support for TDLS
+#  0 - disable
+#  1 - enable
+gEnableTDLSSupport=1
+
+# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
+# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
+# and RSSI) is met and then will initiate teardown when teardown criteria
+# (idle packet count and RSSI) is met.
+#  0 - disable
+#  1 - enable
+gEnableTDLSImplicitTrigger=1
+
+# Enable TDLS External Control. That is, user space application has to
+# first configure a peer MAC in wlan driver towards which TDLS is desired.
+# Device will establish TDLS only towards those configured peers whenever
+# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
+# when teardown criteria (idle packet count and RSSI) is met. However,
+# device will accept TDLS connection if it is initiated from any other peer,
+# even if that peer is not configured.
+#  0 - disable
+#  1 - enable
+# For TDLS External Control, Implicit Trigger must also be enabled.
+gTDLSExternalControl=1
+
+# Enable support for TDLS off-channel operation
+#  0 - disable
+#  1 - enable
+# TDLS off-channel operation will be invoked when there is only one
+# TDLS connection.
+gEnableTDLSOffChannel=1
+
+gEnableTDLSScan=1
+gTDLSTxPacketThreshold=10
+gTDLSIdlePacketThreshold=1
+
+#############################################
+# P2P related configurations
+#############################################
+#P2P Listen offload
+gEnableP2pListenOffload=1
+
+#Enable or Disable p2p device address administered
+isP2pDeviceAddrAdministrated=0
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
+#For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
+#If doesn't honor for 5 seconds then DUT remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try on
+#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames.
+#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
+#where we send NULL frame.
+
+#gApLinkMonitorPeriod = 10
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
+#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
+gGoKeepAlivePeriod = 20
+gApKeepAlivePeriod = 20
+
+#############################################
+# SAP related configurations
+#############################################
+#Enable OBSS protection
+gEnableApOBSSProt=1
+
+#Enable/Disable UAPSD for SoftAP
+gEnableApUapsd=1
+
+# SAP auto channel selection configuration
+# 0 = disable auto channel selection
+# 1 = enable auto channel selection, channel provided by supplicant will be ignored
+gApAutoChannelSelection=0
+
+#SOFTAP Channel Range selection
+gAPChannelSelectStartChannel=1
+gAPChannelSelectEndChannel=11
+
+# SAP Country code
+# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
+# Example
+#   US Indoor, USI
+#   Korea Outdoor, KRO
+#   Japan without optional byte, JP
+#   France without optional byte, FR
+#gAPCntryCode=USI
+
+# DFS Master Capability
+gEnableDFSMasterCap=1
+
+# Disable 11AC for hotspot
+gSapForce11NFor11AC=1
+
+#Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
+gAPAutoShutOff=0
+
+# Remove Overlap channel restriction
+gEnableOverLapCh=0
+
+# Enable/Disable channel avoidance for SAP in SCC scenario
+# 0 - disable
+# 1 - enable
+gSapSccChanAvoidance=0
+
+#Enable/Disable Tx beamformee in SAP mode
+gEnableTxBFeeSAP=1
+
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
-- 
cgit v1.2.3