Create gs201 device folder baseline

clone from gs101 sha 9d1c97c2

Bug: 183183095
Change-Id: Ie7112bdf0aceb33c9e1956aa52e961b670582733

12 files changed, 621 insertions, 0 deletions

diff --git a/overlay/frameworks/base/core/res/res/values/arrays.xml b/overlay/frameworks/base/core/res/res/values/arrays.xml
new file mode 100644
index 0000000..2d5e460
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/values/arrays.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2020 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<resources>
+    <!-- Device-specific array of SIM slot indexes which are are embedded eUICCs.
+         e.g. If a device has two physical slots with indexes 0, 1, and slot 1 is an
+         eUICC, then the value of this array should be:
+             <integer-array name="non_removable_euicc_slots">
+                 <item>1</item>
+             </integer-array>
+         If a device has three physical slots and slot 1 and 2 are eUICCs, then the value of
+         this array should be:
+             <integer-array name="non_removable_euicc_slots">
+                <item>1</item>
+                <item>2</item>
+             </integer-array>
+         This is used to differentiate between removable eUICCs and built in eUICCs, and should
+         be set by OEMs for devices which use eUICCs. -->
+    <integer-array name="non_removable_euicc_slots">
+        <item>1</item>
+        <item>2</item>
+    </integer-array>
+</resources>
+
diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
new file mode 100644
index 0000000..8217f28
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -0,0 +1,290 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2016, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+
+    <!-- Our amoled doesn't animate well. -->
+    <bool name="config_animateScreenLights">false</bool>
+
+    <bool name="config_ui_enableFadingMarquee">false</bool>
+
+    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
+         autodetected from the Configuration. -->
+    <bool name="config_showNavigationBar">true</bool>
+
+    <!--  Whether Multiuser UI should be shown -->
+    <bool name="config_enableMultiUserUI">true</bool>
+
+    <!--  Maximum number of supported users -->
+    <integer name="config_multiuserMaximumUsers">4</integer>
+
+    <!-- Boolean indicating if current platform supports HFP inband ringing -->
+    <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool>
+
+    <!-- Whether Hearing Aid profile is supported -->
+    <bool name="config_hearing_aid_profile_supported">true</bool>
+
+    <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
+    <bool translatable="false" name="config_wifi_dual_band_support">true</bool>
+
+    <!-- Enable 802.11ac for Wifi hotspot (SAP) -->
+    <bool translatable="false" name="config_wifi_softap_ieee80211ac_supported">true</bool>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
+         should be empty.  An example would be "softap.*" -->
+    <string-array translatable="false" name="config_tether_wifi_regexs">
+        <item>"wlan0"</item>
+        <item>"softap.*"</item>
+    </string-array>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         USB interfaces.  If the device doesn't want to support tething over USB this should
+         be empty.  An example would be "usb.*" -->
+    <string-array translatable="false" name="config_tether_usb_regexs">
+        <item>"usb\\d"</item>
+        <item>"rndis\\d"</item>
+    </string-array>
+
+    <!-- When true use the linux /dev/input/event subsystem to detect the switch changes
+         on the headphone/microphone jack. When false use the older uevent framework. -->
+    <bool name="config_useDevInputEventForAudioJack">true</bool>
+
+    <string translatable="false" name="config_radio_access_family">GSM|CDMA|EVDO|WCDMA|LTE</string>
+
+    <!-- Enable doze mode
+         ComponentName of a dream to show whenever the system would otherwise have gone to sleep. -->
+    <string translatable="false" name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
+
+    <!-- Type of the ambient tap sensor. Empty if ambient tap is not supported. -->
+    <string name="config_dozeTapSensorType" translatable="false">com.google.sensor.single_touch</string>
+
+    <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
+    <bool name="config_unplugTurnsOnScreen">true</bool>
+
+    <!-- If device supports pickup/lift gesture -->
+    <bool name="config_dozePulsePickup">true</bool>
+
+    <!-- Screen brightness when dozing. -->
+    <integer name="config_screenBrightnessDoze">34</integer>
+
+    <!-- Whether the always on display mode is available. -->
+    <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
+
+    <!-- Disable AOD by default -->
+    <bool name="config_dozeAlwaysOnEnabled">false</bool>
+
+    <!-- Specifies whether to decouple the auto-suspend state of the device from the display on/off state. -->
+    <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool>
+
+    <!-- Specifies whether to decouple the interactive state of the device from the display on/off state. -->
+    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
+
+    <!-- Radius of the software rounded corners at the top of the display in its natural
+        orientation. If zero, the value of rounded_corner_radius is used. -->
+    <dimen name="rounded_corner_radius_top">52px</dimen>
+
+    <!-- Radius of the software rounded corners at the bottom of the display in its natural
+        orientation. If zero, the value of rounded_corner_radius is used. -->
+    <dimen name="rounded_corner_radius_bottom">52px</dimen>
+
+    <!-- Top adjustment for the software rounded corners since corners are not perfectly
+        round.  This value is used when retrieving the "radius" of the top rounded corner in cases
+        where the exact bezier curve cannot be retrieved.  This value will be subtracted from
+        rounded_corner_radius_top to more accurately provide a "radius" for the top rounded corners.
+         -->
+    <dimen name="rounded_corner_radius_top_adjustment">5px</dimen>
+
+    <!-- Bottom adjustment for the software rounded corners since corners are not perfectly
+        round.  This value is used when retrieving the "radius" of the bottom rounded corner in
+        cases where the exact bezier curve cannot be retrieved.  This value will be subtracted from
+        rounded_corner_radius_bottom to more accurately provide a "radius" for the bottom rounded
+        corners. -->
+    <dimen name="rounded_corner_radius_bottom_adjustment">4px</dimen>
+
+    <!-- Height of the status bar -->
+    <dimen name="status_bar_height_portrait">28dp</dimen>
+
+    <!-- Height of area above QQS where battery/time go (equal to status bar height if > 48dp) -->
+    <dimen name="quick_qs_offset_height">171px</dimen>
+    <!-- Total height of QQS (quick_qs_offset_height + 128dp) -->
+    <dimen name="quick_qs_total_height">177dp</dimen>
+
+    <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
+    <integer name="config_shutdownBatteryTemperature">600</integer>
+
+    <!-- Whether or not we should show the option to show battery percentage -->
+    <bool name="config_battery_percentage_setting_available">true</bool>
+
+    <!-- Number of physical SIM slots on the device. This includes both eSIM
+    and pSIM slots, and is not necessarily the same as the number of phones/logical modems
+    supported by the device.  For example, a multi-sim device can have 2 phones/logical modems,
+    but 3 physical slots, or a single SIM device can have 1 phones/logical modems, but 2
+    physical slots (one eSIM and one pSIM) -->
+    <integer name="config_num_physical_slots">3</integer>
+
+    <!-- Enable CBRS support -->
+    <bool translatable="false" name="config_cbrs_supported">true</bool>
+
+    <!-- IWLAN-->
+    <string name="config_wlan_data_service_package">com.google.android.iwlan</string>
+    <string name="config_wlan_network_service_package">com.google.android.iwlan</string>
+    <bool name="config_wlan_data_service_conn_persistence_on_restart">false</bool>
+    <string name="config_qualified_networks_service_package">com.shannon.qualifiednetworksservice</string>
+
+    <!-- Boolean indicating USSD over IMS is allowed.
+     If it is not supported due to modem limitations, USSD send over the CS pipe instead.-->
+    <bool name="config_allow_ussd_over_ims">true</bool>
+
+    <!-- Flag specifying whether VoLTE is available on device -->
+    <bool name="config_device_volte_available">true</bool>
+
+    <!-- Flag specifying whether VoLTE is available on device -->
+    <bool name="config_device_vt_available">true</bool>
+
+    <!-- Flag specifying whether WFC over IMS is availasble on device -->
+    <bool name="config_device_wfc_ims_available">true</bool>
+
+    <!-- Whether the new Auto Selection Network UI should be shown -->
+    <bool name="config_enableNewAutoSelectNetworkUI">true</bool>
+
+    <!-- Is the device capable of hot swapping an UICC Card -->
+    <bool name="config_hotswapCapable">true</bool>
+
+    <!-- The default refresh rate. P21 manages this using the peak refresh rate setting, so set
+         this value to 0 so it has no effect. -->
+    <integer name="config_defaultRefreshRate">0</integer>
+
+    <!-- The default peak refresh rate. -->
+    <integer name="config_defaultPeakRefreshRate">60</integer>
+
+    <!-- Optional IPsec algorithms enabled by this device, defaulting to empty. OEMs can override
+         it by providing a list of algorithm names in an overlay config.xml file.
+
+         As Android releases new versions, more algorithms are becoming mandatory. Mandatory
+         algorithms will be automatically enabled on the device. Optional algorithms need
+         to be explicitly declared in this resource to be enabled.
+             * SDK level 28 makes the following algorithms mandatory : "cbc(aes)", "hmac(md5)",
+               "hmac(sha1)", "hmac(sha256)", "hmac(sha384)", "hmac(sha512)", "rfc4106(gcm(aes))"
+             * SDK level 31 makes the following algorithms mandatory : "rfc3686(ctr(aes))",
+               "xcbc(aes)", "rfc7539esp(chacha20,poly1305)"
+     -->
+    <string-array name="config_optionalIpSecAlgorithms" translatable="false">
+        <!-- Add algorithm here -->
+        <item>"xcbc(aes)"</item>
+        <item>"rfc3686(ctr(aes))"</item>
+    </string-array>
+
+    <!-- List supported color modes. -->
+    <integer-array name="config_availableColorModes">
+        <item>0</item> <!-- COLOR_MODE_NATURAL -->
+        <item>256</item> <!-- vendor color mode boosted -->
+        <item>3</item> <!-- COLOR_MODE_AUTOMATIC -->
+    </integer-array>
+
+    <integer-array name="config_mappedColorModes">
+        <item>0</item> <!-- COLOR_MODE_NATURAL -->
+        <item>256</item> <!-- COLOR_MODE_BOOSTED -->
+        <item>2</item> <!-- COLOR_MODE_SATURATED -->
+        <item>3</item> <!-- COLOR_MODE_AUTOMATIC -->
+    </integer-array>
+
+    <!-- Color mode to use when accessibility transforms are enabled. This color mode must be
+     supported by the device, but not necessarily appear in config_availableColorModes. The
+     regularly selected color mode will be used if this value is negative. -->
+    <integer name="config_accessibilityColorMode">2</integer>
+
+    <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently
+         in hardware. -->
+    <bool name="config_setColorTransformAccelerated">true</bool>
+
+    <!-- Default color temperature, in Kelvin, to tint the screen when night display is
+         activated. -->
+    <integer name="config_nightDisplayColorTemperatureDefault">3339</integer>
+
+    <!-- Whether the device enable the standalone (SA) mode of 5G NR.-->
+    <bool name="config_telephony5gStandalone">true</bool>
+    <!-- Whether the device enable the non-standalone (NSA) mode of 5G NR.-->
+    <bool name="config_telephony5gNonStandalone">true</bool>
+
+    <!-- An array of device capabilities defined by GSMA SGP.22 v2.2.2, and their corresponding major
+     version. -->
+     <string-array translatable="false" name="config_telephonyEuiccDeviceCapabilities">
+          <item>"gsm,8"</item>
+          <item>"utran,9"</item>
+          <item>"eutran,15"</item>
+          <item>"nrepc,15"</item>
+          <item>"nr5gc,15"</item>
+          <item>"eutran5gc,15"</item>
+     </string-array>
+
+    <!-- Auto-brightness sensor type string -->
+    <string name="config_displayLightSensorType">"com.google.sensor.auto_brightness"</string>
+
+    <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
+     when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
+     where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
+     and Strength as defined in Authenticators.java -->
+    <string-array name="config_biometric_sensors" translatable="false" >
+        <item>0:2:15</item> <!-- ID0:Fingerprint:Strong -->
+    </string-array>
+
+    <!-- Default list of files pinned by the Pinner Service -->
+    <string-array translatable="false" name="config_defaultPinnerServiceFiles">
+        <item>"/apex/com.android.art/javalib/core-oj.jar"</item>
+        <item>"/apex/com.android.art/javalib/core-libart.jar"</item>
+        <item>"/apex/com.android.media/javalib/updatable-media.jar"</item>
+        <item>"/system/framework/framework.jar"</item>
+        <item>"/system/framework/services.jar"</item>
+        <item>"/system_ext/priv-app/SystemUIGoogle/SystemUIGoogle.apk"</item>
+    </string-array>
+
+    <!-- Should the pinner service pin the Camera application? -->
+    <bool name="config_pinnerCameraApp">true</bool>
+
+    <!-- Should the pinner service pin the Home application? -->
+    <bool name="config_pinnerHomeApp">true</bool>
+
+    <!-- Display 90Hz blacklist. Apps that do not work well when the display refreshes at 90Hz.
+         When these apps are visible, the display's refresh rate gets fixed to 60Hz. -->
+    <string-array name="config_highRefreshRateBlacklist">
+        <item>com.nianticlabs.pokemongo</item>
+        <item>com.google.android.documentsui</item>
+        <item>com.activision.callofduty.shooter</item>
+        <item>jp.konami.epjCastlevania2</item>
+    </string-array>
+
+    <!-- The default intensity level for haptic feedback. See
+         Settings.System.HAPTIC_FEEDBACK_INTENSITY more details on the constant values and
+         meanings. -->
+    <integer name="config_defaultHapticFeedbackIntensity">3</integer>
+    <!-- The default intensity level for notification vibrations. See
+         Settings.System.NOTIFICATION_VIBRATION_INTENSITY more details on the constant values and
+         meanings. -->
+    <integer name="config_defaultNotificationVibrationIntensity">3</integer>
+    <!-- The default intensity level for notification vibrations. See
+         Settings.System.RING_VIBRATION_INTENSITY more details on the constant values and
+         meanings. -->
+    <integer name="config_defaultRingVibrationIntensity">3</integer>
+
+    <!-- Enables or disables haptic effect when the text insertion/selection handle is moved
+          manually by the user. Off by default, since the expected haptic feedback may not be
+          available on some devices. -->
+    <bool name="config_enableHapticTextHandle">true</bool>
+</resources>
diff --git a/overlay/frameworks/base/packages/SettingsLib/res/drawable-mcc310-mnc004/ic_5g_plus_mobiledata.xml b/overlay/frameworks/base/packages/SettingsLib/res/drawable-mcc310-mnc004/ic_5g_plus_mobiledata.xml
new file mode 100644
index 0000000..998db3b
--- /dev/null
+++ b/overlay/frameworks/base/packages/SettingsLib/res/drawable-mcc310-mnc004/ic_5g_plus_mobiledata.xml
@@ -0,0 +1,36 @@
+<!--
+     Copyright (C) 2020 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:viewportWidth="22"
+    android:viewportHeight="17"
+    android:width="22dp"
+    android:height="17dp">
+  <group>
+    <group>
+      <path android:fillColor="#FF000000"
+          android:pathData="M19.98,3.54v2.81c0,0.47 -0.15,0.84 -0.44,1.11s-0.69,0.41 -1.2,0.41c-0.5,0 -0.89,-0.13 -1.19,-0.4s-0.44,-0.63 -0.45,-1.09V3.54h0.88v2.82c0,0.28 0.07,0.48 0.2,0.61c0.13,0.13 0.32,0.19 0.56,0.19c0.49,0 0.75,-0.26 0.75,-0.78V3.54H19.98z"/>
+      <path android:fillColor="#FF000000"
+            android:pathData="M19.42,12.25l0.57,-3.04h0.88l-0.95,4.27h-0.88l-0.69,-2.85l-0.69,2.85h-0.88l-0.95,-4.27h0.88l0.58,3.03l0.7,-3.03h0.74L19.42,12.25z"/>
+    </group>
+    <group>
+      <path android:fillColor="#FF000000"
+          android:pathData="M0.94,8.49l0.43,-4.96H5.7v1.17H2.39L2.15,7.41c0.41,-0.29 0.85,-0.43 1.33,-0.43c0.77,0 1.38,0.3 1.83,0.9c0.44,0.6 0.66,1.41 0.66,2.43c0,1.03 -0.24,1.84 -0.72,2.43c-0.48,0.59 -1.14,0.88 -1.98,0.88c-0.75,0 -1.36,-0.24 -1.83,-0.73c-0.47,-0.49 -0.74,-1.16 -0.81,-2.02h1.13c0.07,0.57 0.23,1 0.49,1.29c0.26,0.29 0.59,0.43 1.01,0.43c0.47,0 0.84,-0.2 1.1,-0.61c0.26,-0.41 0.4,-0.96 0.4,-1.65c0,-0.65 -0.14,-1.18 -0.43,-1.59C4.05,8.32 3.67,8.11 3.19,8.11c-0.4,0 -0.72,0.1 -0.96,0.31L1.9,8.75L0.94,8.49z"/>
+    </group>
+    <path android:fillColor="#FF000000"
+        android:pathData="M13.86,12.24l-0.22,0.27c-0.63,0.73 -1.55,1.1 -2.76,1.1c-1.08,0 -1.92,-0.36 -2.53,-1.07c-0.61,-0.71 -0.93,-1.72 -0.94,-3.02V7.56c0,-1.39 0.28,-2.44 0.84,-3.13c0.56,-0.7 1.39,-1.04 2.51,-1.04c0.95,0 1.69,0.26 2.22,0.79c0.54,0.53 0.83,1.28 0.89,2.26h-1.25c-0.05,-0.62 -0.22,-1.1 -0.52,-1.45c-0.29,-0.35 -0.74,-0.52 -1.34,-0.52c-0.72,0 -1.24,0.23 -1.57,0.7C8.85,5.63 8.68,6.37 8.66,7.4v2.03c0,1 0.19,1.77 0.57,2.31c0.38,0.54 0.93,0.8 1.65,0.8c0.67,0 1.19,-0.16 1.54,-0.49l0.18,-0.17V9.59h-1.82V8.52h3.07V12.24z"/>
+  </group>
+</vector>
+
diff --git a/overlay/frameworks/base/packages/SettingsLib/res/drawable-mcc311-mnc480/ic_5g_plus_mobiledata.xml b/overlay/frameworks/base/packages/SettingsLib/res/drawable-mcc311-mnc480/ic_5g_plus_mobiledata.xml
new file mode 100644
index 0000000..998db3b
--- /dev/null
+++ b/overlay/frameworks/base/packages/SettingsLib/res/drawable-mcc311-mnc480/ic_5g_plus_mobiledata.xml
@@ -0,0 +1,36 @@
+<!--
+     Copyright (C) 2020 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:viewportWidth="22"
+    android:viewportHeight="17"
+    android:width="22dp"
+    android:height="17dp">
+  <group>
+    <group>
+      <path android:fillColor="#FF000000"
+          android:pathData="M19.98,3.54v2.81c0,0.47 -0.15,0.84 -0.44,1.11s-0.69,0.41 -1.2,0.41c-0.5,0 -0.89,-0.13 -1.19,-0.4s-0.44,-0.63 -0.45,-1.09V3.54h0.88v2.82c0,0.28 0.07,0.48 0.2,0.61c0.13,0.13 0.32,0.19 0.56,0.19c0.49,0 0.75,-0.26 0.75,-0.78V3.54H19.98z"/>
+      <path android:fillColor="#FF000000"
+            android:pathData="M19.42,12.25l0.57,-3.04h0.88l-0.95,4.27h-0.88l-0.69,-2.85l-0.69,2.85h-0.88l-0.95,-4.27h0.88l0.58,3.03l0.7,-3.03h0.74L19.42,12.25z"/>
+    </group>
+    <group>
+      <path android:fillColor="#FF000000"
+          android:pathData="M0.94,8.49l0.43,-4.96H5.7v1.17H2.39L2.15,7.41c0.41,-0.29 0.85,-0.43 1.33,-0.43c0.77,0 1.38,0.3 1.83,0.9c0.44,0.6 0.66,1.41 0.66,2.43c0,1.03 -0.24,1.84 -0.72,2.43c-0.48,0.59 -1.14,0.88 -1.98,0.88c-0.75,0 -1.36,-0.24 -1.83,-0.73c-0.47,-0.49 -0.74,-1.16 -0.81,-2.02h1.13c0.07,0.57 0.23,1 0.49,1.29c0.26,0.29 0.59,0.43 1.01,0.43c0.47,0 0.84,-0.2 1.1,-0.61c0.26,-0.41 0.4,-0.96 0.4,-1.65c0,-0.65 -0.14,-1.18 -0.43,-1.59C4.05,8.32 3.67,8.11 3.19,8.11c-0.4,0 -0.72,0.1 -0.96,0.31L1.9,8.75L0.94,8.49z"/>
+    </group>
+    <path android:fillColor="#FF000000"
+        android:pathData="M13.86,12.24l-0.22,0.27c-0.63,0.73 -1.55,1.1 -2.76,1.1c-1.08,0 -1.92,-0.36 -2.53,-1.07c-0.61,-0.71 -0.93,-1.72 -0.94,-3.02V7.56c0,-1.39 0.28,-2.44 0.84,-3.13c0.56,-0.7 1.39,-1.04 2.51,-1.04c0.95,0 1.69,0.26 2.22,0.79c0.54,0.53 0.83,1.28 0.89,2.26h-1.25c-0.05,-0.62 -0.22,-1.1 -0.52,-1.45c-0.29,-0.35 -0.74,-0.52 -1.34,-0.52c-0.72,0 -1.24,0.23 -1.57,0.7C8.85,5.63 8.68,6.37 8.66,7.4v2.03c0,1 0.19,1.77 0.57,2.31c0.38,0.54 0.93,0.8 1.65,0.8c0.67,0 1.19,-0.16 1.54,-0.49l0.18,-0.17V9.59h-1.82V8.52h3.07V12.24z"/>
+  </group>
+</vector>
+
diff --git a/overlay/frameworks/base/packages/SettingsLib/res/values-mcc310-mnc004/strings.xml b/overlay/frameworks/base/packages/SettingsLib/res/values-mcc310-mnc004/strings.xml
new file mode 100644
index 0000000..f8ed0c0
--- /dev/null
+++ b/overlay/frameworks/base/packages/SettingsLib/res/values-mcc310-mnc004/strings.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/**
+ * Copyright (c) 2020, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Content description of the data connection type 5G UW. [CHAR LIMIT=NONE] -->
+    <string name="data_connection_5g_plus" translatable="false">5G UW</string>
+</resources>
diff --git a/overlay/frameworks/base/packages/SettingsLib/res/values-mcc311-mnc480/strings.xml b/overlay/frameworks/base/packages/SettingsLib/res/values-mcc311-mnc480/strings.xml
new file mode 100644
index 0000000..f8ed0c0
--- /dev/null
+++ b/overlay/frameworks/base/packages/SettingsLib/res/values-mcc311-mnc480/strings.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/**
+ * Copyright (c) 2020, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Content description of the data connection type 5G UW. [CHAR LIMIT=NONE] -->
+    <string name="data_connection_5g_plus" translatable="false">5G UW</string>
+</resources>
diff --git a/overlay/frameworks/base/packages/SettingsLib/res/values-mcc440-mnc20/config.xml b/overlay/frameworks/base/packages/SettingsLib/res/values-mcc440-mnc20/config.xml
new file mode 100644
index 0000000..69c1dac
--- /dev/null
+++ b/overlay/frameworks/base/packages/SettingsLib/res/values-mcc440-mnc20/config.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2020, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You my obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds. -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Control whether status bar should distinguish HSPA data icon from UMTS
+    data icon on devices -->
+    <bool name="config_hspa_data_distinguishable">false</bool>
+</resources>
diff --git a/overlay/frameworks/base/packages/SystemUI/res/drawable/rounded_corner_bottom.xml b/overlay/frameworks/base/packages/SystemUI/res/drawable/rounded_corner_bottom.xml
new file mode 100644
index 0000000..fd26810
--- /dev/null
+++ b/overlay/frameworks/base/packages/SystemUI/res/drawable/rounded_corner_bottom.xml
@@ -0,0 +1,24 @@
+<!--
+    Copyright (C) 2021 The Android Open Source Project
+
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:width="176px"
+    android:height="176px"
+    android:viewportWidth="176"
+    android:viewportHeight="176">
+
+    <path
+        android:fillColor="#000000"
+        android:pathData="M 176,0 C 113.73671,2.2722224 103.12805,3.1915621 71.989998,4.9579044 56.517503,6.3013836 48.185745,7.3156476 42.201986,9.2785056 37.462895,10.833074 32.661175,12.708735 28.059795,15.610552 c -3.88932,2.452765 -7.023798,5.159587 -10.156494,8.35715 -3.872981,3.953175 -5.465252,6.525289 -7.692892,10.97322 C 7.6872844,39.978847 5.9561628,46.294254 5.3123092,50.05696 3.3464797,61.545346 2.7390184,75.813278 2.0576757,93.519957 0.99137121,121.23099 1.5482674,135.74135 0,176 V 0 Z" />
+</vector>
+
diff --git a/overlay/frameworks/base/packages/SystemUI/res/drawable/rounded_corner_top.xml b/overlay/frameworks/base/packages/SystemUI/res/drawable/rounded_corner_top.xml
new file mode 100644
index 0000000..fd26810
--- /dev/null
+++ b/overlay/frameworks/base/packages/SystemUI/res/drawable/rounded_corner_top.xml
@@ -0,0 +1,24 @@
+<!--
+    Copyright (C) 2021 The Android Open Source Project
+
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:width="176px"
+    android:height="176px"
+    android:viewportWidth="176"
+    android:viewportHeight="176">
+
+    <path
+        android:fillColor="#000000"
+        android:pathData="M 176,0 C 113.73671,2.2722224 103.12805,3.1915621 71.989998,4.9579044 56.517503,6.3013836 48.185745,7.3156476 42.201986,9.2785056 37.462895,10.833074 32.661175,12.708735 28.059795,15.610552 c -3.88932,2.452765 -7.023798,5.159587 -10.156494,8.35715 -3.872981,3.953175 -5.465252,6.525289 -7.692892,10.97322 C 7.6872844,39.978847 5.9561628,46.294254 5.3123092,50.05696 3.3464797,61.545346 2.7390184,75.813278 2.0576757,93.519957 0.99137121,121.23099 1.5482674,135.74135 0,176 V 0 Z" />
+</vector>
+
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
new file mode 100644
index 0000000..67dcdc5
--- /dev/null
+++ b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2020, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds. -->
+<resources>
+    <!-- Doze: does this device support STATE_DOZE?  -->
+    <bool name="doze_display_state_supported">true</bool>
+
+    <!-- Doze: does this device support STATE_DOZE_SUSPEND?  -->
+    <bool name="doze_suspend_display_state_supported">false</bool>
+
+    <string name="config_rounded_mask">M21,0C19.94,0.01 18.83,0.04 17.73,0.11C16.91,0.17 16.09,0.25 15.3,0.36C14.5,0.48 13.72,0.62 12.95,0.81C11.42,1.19 9.97,1.72 8.65,2.43C7.32,3.14 6.12,4.02 5.08,5.07C4.04,6.11 3.15,7.31 2.44,8.64C1.73,9.97 1.19,11.42 0.82,12.94C0.63,13.7 0.48,14.49 0.37,15.29C0.25,16.09 0.17,16.9 0.12,17.72C0.05,18.82 0.02,19.93 0.01,21.55</string>
+</resources>
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/dimens.xml b/overlay/frameworks/base/packages/SystemUI/res/values/dimens.xml
new file mode 100644
index 0000000..cea6e90
--- /dev/null
+++ b/overlay/frameworks/base/packages/SystemUI/res/values/dimens.xml
@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ * Copyright (c) 2020, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+*/
+-->
+<resources>
+    <!-- for 20dp of padding at 3.5px/dp at default density -->
+    <dimen name="rounded_corner_content_padding">70px</dimen>
+
+    <!-- the padding on the top of the statusbar (usually 0) -->
+    <dimen name="status_bar_padding_top">1dp</dimen>
+
+    <!-- Padding for the system icons on the keyguard (when no multi user switch is showing).
+    The icons always have a 4dp padding in the container so we only need 56 extra px of padding
+    for the corners -->
+    <dimen name="system_icons_super_container_avatarless_margin_end">56px</dimen>
+
+    <!-- Multi user switch has some intrinsic padding to it -->
+    <dimen name="multi_user_switch_keyguard_margin">40px</dimen>
+
+    <dimen name="keyguard_carrier_text_margin">70px</dimen>
+
+</resources>
diff --git a/overlay/packages/services/Telephony/res/values/config.xml b/overlay/packages/services/Telephony/res/values/config.xml
new file mode 100644
index 0000000..0afa3ca
--- /dev/null
+++ b/overlay/packages/services/Telephony/res/values/config.xml
@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2020 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Phone app resources that may need to be customized
+     for different hardware or product builds. -->
+<resources>
+    <!-- String indicating the package name of the device ImsService implementation for MMTEL. -->
+    <string name="config_ims_mmtel_package">com.shannon.imsservice</string>
+
+    <!-- String indicating the package name of the device ImsService implementation for RCS. -->
+    <string name="config_ims_rcs_package">com.shannon.rcsservice</string>
+
+    <!-- Flag indicating whether the device supports RTT (real-time text) -->
+    <bool name="config_support_rtt">true</bool>
+
+    <!-- Show enabled lte option for lte device -->
+    <bool name="config_enabled_lte" translatable="false">true</bool>
+
+    <!-- String indicating the package name of the device GbaService implementation. -->
+    <string name="config_gba_package" translatable="false">com.shannon.rcsservice</string>
+
+    <!-- This device requires that emergency calls are placed over the default data SIM.
+         This is done mainly to avoid placing emergency calls over CROSS SIM when even
+         though it's the default voice SIM. -->
+    <bool name="config_gnss_supl_requires_default_data_for_emergency">true</bool>
+</resources>