path: root/overlay/frameworks/base/core/res/res/values/config.xml

<?xml version="1.0" encoding="utf-8"?>
<!--
/*
** Copyright 2016, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
**     http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->

<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">

    <!-- If this is true, the screen will fade off. -->
    <bool name="config_animateScreenLights">false</bool>

    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
         autodetected from the Configuration. -->
    <bool name="config_showNavigationBar">true</bool>

    <!-- Indicate whether closing the lid causes the device to go to sleep and opening
         it causes the device to wake up.
         The default is false. -->
    <bool name="config_lidControlsSleep">true</bool>

    <!-- Indicate whether to allow the device to suspend when the screen is off
         due to the proximity sensor.  This resource should only be set to true
         if the sensor HAL correctly handles the proximity sensor as a wake-up source.
         Otherwise, the device may fail to wake out of suspend reliably.
         The default is false. -->
    <bool name="config_suspendWhenScreenOffDueToProximity">true</bool>

    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
    <bool name="config_automatic_brightness_available">true</bool>

    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
         for debouncing the light sensor.  Different constants are used to debounce the light sensor
         when adapting to brighter or darker environments.  This parameter controls how quickly
         brightness changes occur in response to an observed change in light level that exceeds the
         hysteresis threshold. -->
    <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer>
    <integer name="config_autoBrightnessDarkeningLightDebounce">4000</integer>

    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
         The N entries of this array define N  1 zones as follows:

         Zone 0:        0 <= LUX < array[0]
         Zone 1:        array[0] <= LUX < array[1]
         ...
         Zone N:        array[N - 1] <= LUX < array[N]
         Zone N + 1     array[N] <= LUX < infinity

         Must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLevels">
        <item>1</item>
        <item>2</item>
        <item>3</item>
        <item>4</item>
        <item>8</item>
        <item>12</item>
        <item>20</item>
        <item>33</item>
        <item>55</item>
        <item>90</item>
        <item>148</item>
        <item>245</item>
        <item>403</item>
        <item>665</item>
        <item>1097</item>
        <item>1808</item>
        <item>2981</item>
        <item>5000</item>
    </integer-array>

    <!-- Array of desired screen brightness in nits corresponding to the lux values
         in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
         config_screenBrightnessMaximumNits, the display brightness is defined as the measured
         brightness of an all-white image.

         If this is defined then:
            - config_autoBrightnessLcdBacklightValues should not be defined
            - config_screenBrightnessNits must be defined
            - config_screenBrightnessBacklight must be defined

         This array should have size one greater than the size of the config_autoBrightnessLevels
         array. The brightness values must be non-negative and non-decreasing. This must be
         overridden in platform specific overlays -->
    <array name="config_autoBrightnessDisplayValuesNits">
        <item>10.45935</item>   <!-- 0-1 -->
        <item>29.25559</item>   <!-- 1-2 -->
        <item>34.240692</item>  <!-- 2-3 -->
        <item>37.514347</item>  <!-- 3-4 -->
        <item>40.018696</item>  <!-- 4-8 -->
        <item>46.885098</item>  <!-- 8-12 -->
        <item>51.626434</item>  <!-- 12-20 -->
        <item>58.610405</item>  <!-- 20-33 -->
        <item>66.890915</item>  <!-- 33-55 -->
        <item>77.61644</item>   <!-- 55-90 -->
        <item>90.221886</item>  <!-- 90-148 -->
        <item>105.80314</item>  <!-- 148-245 -->
        <item>126.073845</item> <!-- 245-403 -->
        <item>154.16931</item>  <!-- 403-665 -->
        <item>191.83717</item>  <!-- 665-1097 -->
        <item>240.74442</item>  <!-- 1097-1808 -->
        <item>294.84857</item>  <!-- 1808-2981 -->
        <item>348.05453</item>  <!-- 2981-5000 -->
        <item>394.98703</item>  <!-- 5000+ -->
    </array>

    <!-- An array describing the screen's backlight values corresponding to the brightness
         values in the config_screenBrightnessNits array.

         This array should be equal in size to config_screenBrightnessBacklight. -->
    <integer-array name="config_screenBrightnessBacklight">
        <item>0</item>
        <item>15</item>
        <item>30</item>
        <item>45</item>
        <item>60</item>
        <item>75</item>
        <item>90</item>
        <item>105</item>
        <item>120</item>
        <item>135</item>
        <item>150</item>
        <item>165</item>
        <item>180</item>
        <item>195</item>
        <item>210</item>
        <item>225</item>
        <item>240</item>
        <item>255</item>
    </integer-array>

    <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
         values in the config_screenBrightnessBacklight array.  On OLED displays these  values
         should be measured with an all white image while the display is in the fully on state.
         Note that this value should *not* reflect the maximum brightness value for any high
         brightness modes but only the maximum brightness value obtainable in a sustainable manner.

         This array should be equal in size to config_screenBrightnessBacklight -->
    <array name="config_screenBrightnessNits">
        <item>0</item>
        <item>26.11</item>
        <item>50.5</item>
        <item>74.17</item>
        <item>96.89</item>
        <item>118.3</item>
        <item>139.8</item>
        <item>162.9</item>
        <item>189.8</item>
        <item>217.4</item>
        <item>240.4</item>
        <item>265.3</item>
        <item>288.7</item>
        <item>316</item>
        <item>340.8</item>
        <item>357.9</item>
        <item>376.2</item>
        <item>392.9</item>
    </array>

    <!-- Minimum screen brightness allowed by the power manager. -->
    <integer name="config_screenBrightnessDim">6</integer>

    <!-- Screen brightness when dozing. -->
    <integer name="config_screenBrightnessDoze">13</integer>

    <!-- Whether the display blanks itself when going from a doze to a non-doze state -->
    <bool name="config_displayBlanksAfterDoze">true</bool>

    <!-- Default screen brightness setting.
         Must be in the range specified by minimum and maximum. -->
    <integer name="config_screenBrightnessSettingDefault">98</integer>

    <!-- Default screen brightness for VR setting. Default value: 0x56 => 86. -->
    <integer name="config_screenBrightnessForVrSettingDefault">86</integer>

    <!-- Minimum screen brightness setting allowed by the power manager.
         The user is forbidden from setting the brightness below this level. -->
    <integer name="config_screenBrightnessSettingMinimum">1</integer>

    <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
    <bool name="config_unplugTurnsOnScreen">true</bool>

    <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently
         in hardware. -->
    <bool name="config_setColorTransformAccelerated">true</bool>

    <!-- Boolean indicating if restoring network selection should be skipped -->
    <!-- The restoring is handled by modem if it is true -->
    <bool translatable="false" name="skip_restoring_network_selection">true</bool>

    <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
    <bool name="config_cellBroadcastAppLinks">true</bool>

    <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
    <integer name="config_shutdownBatteryTemperature">680</integer>

    <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
    <bool name="config_intrusiveNotificationLed">true</bool>

    <!-- Default color for notification LED is white. -->
    <color name="config_defaultNotificationColor">#ffffffff</color>

    <!-- Default LED on time for notification LED in milliseconds. -->
    <integer name="config_defaultNotificationLedOn">1000</integer>

    <!-- Default LED off time for notification LED in milliseconds. -->
    <integer name="config_defaultNotificationLedOff">9000</integer>

    <!-- reference volume index for music stream to limit headphone volume and display warning -->
    <integer name="config_safe_media_volume_index">4</integer>

    <!--  Whether Multiuser UI should be shown -->
    <bool name="config_enableMultiUserUI">true</bool>

    <!--  Maximum number of supported users -->
    <integer name="config_multiuserMaximumUsers">4</integer>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         USB interfaces.  If the device doesn't want to support tething over USB this should
         be empty.  An example would be "usb.*" -->
    <string-array translatable="false" name="config_tether_usb_regexs">
        <item>"usb\\d"</item>
        <item>"rndis\\d"</item>
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
         should be empty.  An example would be "softap.*" -->
    <string-array translatable="false" name="config_tether_wifi_regexs">
        <item>"wlan0"</item>
        <item>"softap.*"</item>
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         bluetooth interfaces.  If the device doesn't want to support tethering over bluetooth this
         should be empty. -->
    <string-array translatable="false" name="config_tether_bluetooth_regexs">
           <item>"bt-pan"</item>
    </string-array>

    <!-- Max number of scan filters supported by blutooth controller. 0 if the
         device does not support hardware scan filters-->
    <integer translatable="false" name="config_bluetooth_max_scan_filters">1</integer>

    <!-- Max number of advertisers supported by bluetooth controller. 0 if the
         device does not support multiple advertisement-->
    <integer translatable="false" name="config_bluetooth_max_advertisers">4</integer>

    <!-- Operating voltage for bluetooth controller. 0 by default-->
    <integer translatable="false" name="config_bluetooth_operating_voltage_mv">3300</integer>

    <!-- Boolean indicating if current platform supports HFP inband ringing -->
    <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool>

    <!-- Array of allowable ConnectivityManager network types for tethering -->
    <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
         [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
    <integer-array translatable="false" name="config_tether_upstream_types">
        <item>1</item>
        <item>0</item>
        <item>5</item>
        <item>7</item>
    </integer-array>

    <!-- This string array should be overridden by the device to present a list of network
         attributes.  This is used by the connectivity manager to decide which networks can coexist
         based on the hardware -->
    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
         before automatically restore the default connection.  Set -1 if the connection
         does not require auto-restore. -->
    <!-- the 6th element indicates boot-time dependency-met value. -->
    <string-array translatable="false" name="networkAttributes">
        <item>"wifi,1,1,1,-1,true"</item>
        <item>"mobile,0,0,0,-1,true"</item>
        <item>"mobile_mms,2,0,2,60000,true"</item>
        <item>"mobile_supl,3,0,2,60000,true"</item>
        <item>"mobile_dun,4,0,2,60000,true"</item>
        <item>"mobile_hipri,5,0,3,60000,true"</item>
        <item>"mobile_fota,10,0,2,60000,true"</item>
        <item>"mobile_ims,11,0,2,60000,true"</item>
        <item>"mobile_cbs,12,0,2,60000,true"</item>
        <item>"mobile_ia,14,0,2,-1,true"</item>
        <item>"bluetooth,7,7,2,-1,true"</item>
        <item>"ethernet,9,9,9,-1,true"</item>
        <item>"mobile_emergency,15,0,2,-1,true</item>
    </string-array>

    <!-- This string array should be overridden by the device to present a list of radio
         attributes.  This is used by the connectivity manager to decide which networks can coexist
         based on the hardware -->
    <!-- An Array of "[ConnectivityManager connectionType],
                      [# simultaneous connection types]"  -->
    <string-array translatable="false" name="radioAttributes">
        <item>"1,1"</item>
        <item>"0,1"</item>
        <item>"7,1"</item>
        <item>"9,1"</item>
    </string-array>

    <!-- If the hardware supports specially marking packets that caused a wakeup of the
         main CPU, set this value to the mark used. -->
    <integer name="config_networkWakeupPacketMark">0x80000000</integer>

    <!-- Mask to use when checking skb mark defined in config_networkWakeupPacketMark above. -->
    <integer name="config_networkWakeupPacketMask">0x80000000</integer>

    <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
    <bool translatable="false" name="config_wifi_dual_band_support">true</bool>

    <!-- Boolean indicating whether 802.11r Fast BSS Transition is enabled on this platform -->
    <bool translatable="false" name="config_wifi_fast_bss_transition_enabled">true</bool>

    <!-- Boolean indicating whether the wifi chipset has background scan support -->
    <bool translatable="false" name="config_wifi_background_scan_support">true</bool>

    <!-- Integer thresholds, do not connect to APs with RSSI lower than these values  -->
    <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_5GHz">-77</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_24GHz">-80</integer>
    <!-- Integer thresholds for low network score, should be somewhat less than the entry threshholds -->
    <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-80</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-83</integer>

    <!-- Setting this true forces the headset jack switches to use the/dev/input/event subsystem
         rather than the uevent framework. -->
    <bool name="config_useDevInputEventForAudioJack">true</bool>

    <!-- Vibrator pattern for feedback about a long screen/key press -->
    <integer-array name="config_longPressVibePattern">
        <item>0</item>
        <item>7</item>
        <item>10</item>
    </integer-array>

    <!-- Make things go fast -->
    <bool name="config_ui_enableFadingMarquee">false</bool>

    <!-- Vibrator pattern for feedback about touching a virtual key -->
    <integer-array name="config_virtualKeyVibePattern">
        <item>0</item>
        <item>5</item>
        <item>10</item>
    </integer-array>

    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
    <integer-array name="config_keyboardTapVibePattern">
        <item>10</item>
    </integer-array>

    <!-- Wifi driver supports batched scan -->
    <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool>

    <!-- Boolean indicating whether or not to revert to default country code when cellular
    radio is unable to find any MCC information to infer wifi country code from -->
    <bool translatable="false" name="config_wifi_revert_country_code_on_cellular_loss">true</bool>

    <!-- Boolean indicating whether or not wifi should turn off when emergency call is made -->
    <bool translatable="false" name="config_wifi_turn_off_during_emergency_call">true</bool>

   <!-- Enable doze mode
         ComponentName of a dream to show whenever the system would otherwise have gone to sleep. -->
    <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>

    <!-- If true, the doze component is not started until after the screen has been turned off
         and the screen off animation has been performed. -->
    <bool name="config_dozeAfterScreenOffByDefault">true</bool>

    <!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. -->
    <bool name="config_dozePulsePickup">true</bool>

    <!-- Type of the double tap sensor. Empty if double tap is not supported. -->
    <string name="config_dozeDoubleTapSensorType" translatable="false">com.google.sensor.double_touch</string>

    <!-- ImsService package name to bind to by default, if config_dynamic_bind_ims is true -->
    <string name="config_ims_package">org.codeaurora.ims</string>

    <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically -->
    <bool name="config_dynamic_bind_ims">true</bool>

    <!-- Specifies whether to decouple the interactive state of the device from the display on/off state. -->
    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>

    <!-- Is the device capable of hot swapping an UICC Card -->
    <bool name="config_hotswapCapable">true</bool>

    <!-- Flag specifying whether VoLTE is availasble on device -->
    <bool name="config_device_volte_available">true</bool>

    <!-- Flag specifying whether VoLTE is available on device -->
    <bool name="config_device_vt_available">true</bool>

    <!-- Flag specifying whether WFC over IMS is availasble on device -->
    <bool name="config_device_wfc_ims_available">true</bool>

    <!-- Configure mobile tcp buffer sizes in the form:
         rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
         If no value is found for the rat-name in use, the system default will be applied.
    -->
    <string-array name="config_mobile_tcp_buffers">
        <item>umts:131072,262144,1452032,4096,16384,399360</item>
        <item>hspa:131072,262144,2441216,4096,16384,399360</item>
        <item>hsupa:131072,262144,2441216,4096,16384,399360</item>
        <item>hsdpa:131072,262144,2441216,4096,16384,399360</item>
        <item>hspap:131072,262144,2441216,4096,16384,399360</item>
        <item>edge:16384,32768,131072,4096,16384,65536</item>
        <item>gprs:4096,8192,24576,4096,8192,24576</item>
        <item>1xrtt:16384,32768,131070,4096,16384,102400</item>
        <item>evdo:131072,262144,1048576,4096,16384,524288</item>
        <item>lte:524288,1048576,8388608,262144,524288,4194304</item>
    </string-array>

    <!-- Configure wifi tcp buffersizes in the form:
         rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
    <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,4194304,262144,524288,1048576</string>

    <!-- Config SoftAP 2G channel list -->
    <string  translatable="false" name="config_wifi_framework_sap_2G_channel_list">6</string>

    <!-- Config determines whether to update phone object when voice registration
         state changes. Voice radio tech change will always trigger an update of
         phone object irrespective of this config -->
    <bool name="config_switch_phone_on_voice_reg_state_change">false</bool>


    <!-- Use ERI text for network name on CDMA LTE -->
        <bool name="config_LTE_eri_for_network_name">false</bool>

    <!-- Values for GPS configuration -->
    <string-array translatable="false" name="config_gpsParameters">
        <item>SUPL_HOST=supl.google.com</item>
        <item>SUPL_PORT=7275</item>
        <item>XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin</item>
        <item>XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin</item>
        <item>XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin</item>
        <item>NTP_SERVER=north-america.pool.ntp.org</item>
        <item>SUPL_MODE=1</item>
        <item>SUPL_VER=0x20000</item>
        <item>LPP_PROFILE=0</item>
        <item>NMEA_PROVIDER=0</item>
        <item>A_GLONASS_POS_PROTOCOL_SELECT=0</item>
        <item>ERR_ESTIMATE=0</item>
        <item>INTERMEDIATE_POS=0</item>
        <item>SUPL_ES=1</item>
    </string-array>

    <!-- Values for USB port setting. in format of bootmode:current function:new function -->
    <string-array translatable="false" name="config_oemUsbModeOverride">
        <item>"hw-factory:mtp:manufacture,adb"</item>
        <item>"hw-factory:mtp,adb:manufacture,adb"</item>
        <item>"hw-factory:ptp:manufacture,adb"</item>
        <item>"hw-factory:ptp,adb:manufacture,adb"</item>
        <item>"hw-factory:rndis:manufacture,adb"</item>
        <item>"hw-factory:rndis,adb:manufacture,adb"</item>
        <item>"hw-factory:adb:manufacture,adb"</item>
        <item>"bp-tools:mtp:diag,serial_smd,rmnet_ipa,adb"</item>
        <item>"bp-tools:mtp,adb:diag,serial_smd,rmnet_ipa,adb"</item>
        <item>"bp-tools:ptp:diag,serial_smd,rmnet_ipa,adb"</item>
        <item>"bp-tools:ptp,adb:diag,serial_smd,rmnet_ipa,adb"</item>
        <item>"bp-tools:adb:diag,serial_smd,rmnet_ipa,adb"</item>
        <item>"bp-tools:rndis:rndis,serial,adb"</item>
        <item>"bp-tools:rndis,adb:rndis,serial,adb"</item>
    </string-array>

    <!-- Default list of files pinned by the Pinner Service -->
    <string-array translatable="false" name="config_defaultPinnerServiceFiles">
        <item>"/system/framework/arm64/boot-framework.oat"</item>
        <item>"/system/framework/framework.jar"</item>
        <item>"/system/framework/oat/arm64/services.odex"</item>
        <item>"/system/framework/services.jar"</item>
        <item>"/system/framework/arm64/boot.oat"</item>
        <item>"/system/framework/arm64/boot-core-libart.oat"</item>
        <item>"/apex/com.android.art/javalib/core-oj.jar"</item>
        <item>"/apex/com.android.art/javalib/core-libart.jar"</item>
        <item>"/apex/com.android.media/javalib/updatable-media.jar"</item>
    </string-array>

    <!-- Should the pinner service pin the Camera application? -->
    <bool name="config_pinnerCameraApp">true</bool>

    <!-- Enable system navigation keys. -->
    <bool name="config_supportSystemNavigationKeys">true</bool>

    <!-- If this is true, device supports Sustained Performance Mode. -->
    <bool name="config_sustainedPerformanceModeSupported">true</bool>

     <!-- True if Unprocessed audio source supports the required frequency range and level -->
    <bool name="config_supportAudioSourceUnprocessed">true</bool>
</resources>