diff options
Diffstat (limited to 'make_helpers/build_macros.mk')
-rw-r--r-- | make_helpers/build_macros.mk | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/make_helpers/build_macros.mk b/make_helpers/build_macros.mk new file mode 100644 index 00000000..e59a64b4 --- /dev/null +++ b/make_helpers/build_macros.mk @@ -0,0 +1,338 @@ +# +# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. +# +# SPDX-License-Identifier: BSD-3-Clause +# + +# Report an error if the eval make function is not available. +$(eval eval_available := T) +ifneq (${eval_available},T) + $(error This makefile only works with a Make program that supports $$(eval)) +endif + +# Some utility macros for manipulating awkward (whitespace) characters. +blank := +space :=${blank} ${blank} + +# A user defined function to recursively search for a filename below a directory +# $1 is the directory root of the recursive search (blank for current directory). +# $2 is the file name to search for. +define rwildcard +$(strip $(foreach d,$(wildcard ${1}*),$(call rwildcard,${d}/,${2}) $(filter $(subst *,%,%${2}),${d}))) +endef + +# This table is used in converting lower case to upper case. +uppercase_table:=a,A b,B c,C d,D e,E f,F g,G h,H i,I j,J k,K l,L m,M n,N o,O p,P q,Q r,R s,S t,T u,U v,V w,W x,X y,Y z,Z + +# Internal macro used for converting lower case to upper case. +# $(1) = upper case table +# $(2) = String to convert +define uppercase_internal +$(if $(1),$$(subst $(firstword $(1)),$(call uppercase_internal,$(wordlist 2,$(words $(1)),$(1)),$(2))),$(2)) +endef + +# A macro for converting a string to upper case +# $(1) = String to convert +define uppercase +$(eval uppercase_result:=$(call uppercase_internal,$(uppercase_table),$(1)))$(uppercase_result) +endef + +# Convenience function for adding build definitions +# $(eval $(call add_define,FOO)) will have: +# -DFOO if $(FOO) is empty; -DFOO=$(FOO) otherwise +define add_define + DEFINES += -D$(1)$(if $(value $(1)),=$(value $(1)),) +endef + +# Convenience function for adding build definitions +# $(eval $(call add_define_val,FOO,BAR)) will have: +# -DFOO=BAR +define add_define_val + DEFINES += -D$(1)=$(2) +endef + +# Convenience function for verifying option has a boolean value +# $(eval $(call assert_boolean,FOO)) will assert FOO is 0 or 1 +define assert_boolean + $(if $(filter-out 0 1,$($1)),$(error $1 must be boolean)) +endef + +0-9 := 0 1 2 3 4 5 6 7 8 9 + +# Function to verify that a given option $(1) contains a numeric value +define assert_numeric +$(if $($(1)),,$(error $(1) must not be empty)) +$(eval __numeric := $($(1))) +$(foreach d,$(0-9),$(eval __numeric := $(subst $(d),,$(__numeric)))) +$(if $(__numeric),$(error $(1) must be numeric)) +endef + +# IMG_LINKERFILE defines the linker script corresponding to a BL stage +# $(1) = BL stage (2, 30, 31, 32, 33) +define IMG_LINKERFILE + ${BUILD_DIR}/bl$(1).ld +endef + +# IMG_MAPFILE defines the output file describing the memory map corresponding +# to a BL stage +# $(1) = BL stage (2, 30, 31, 32, 33) +define IMG_MAPFILE + ${BUILD_DIR}/bl$(1).map +endef + +# IMG_ELF defines the elf file corresponding to a BL stage +# $(1) = BL stage (2, 30, 31, 32, 33) +define IMG_ELF + ${BUILD_DIR}/bl$(1).elf +endef + +# IMG_DUMP defines the symbols dump file corresponding to a BL stage +# $(1) = BL stage (2, 30, 31, 32, 33) +define IMG_DUMP + ${BUILD_DIR}/bl$(1).dump +endef + +# IMG_BIN defines the default image file corresponding to a BL stage +# $(1) = BL stage (2, 30, 31, 32, 33) +define IMG_BIN + ${BUILD_PLAT}/bl$(1).bin +endef + +# FIP_ADD_PAYLOAD appends the command line arguments required by fiptool +# to package a new payload. Optionally, it adds the dependency on this payload +# $(1) = payload filename (i.e. bl31.bin) +# $(2) = command line option for the specified payload (i.e. --bl31) +# $(3) = fip target dependency (optional) (i.e. bl31) +define FIP_ADD_PAYLOAD + $(eval FIP_ARGS += $(2) $(1)) + $(eval $(if $(3),FIP_DEPS += $(3))) +endef + +# CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation +# $(1) = parameter filename +# $(2) = cert_create command line option for the specified parameter +# $(3) = input parameter (false if empty) +define CERT_ADD_CMD_OPT + $(eval $(if $(3),CRT_DEPS += $(1))) + $(eval CRT_ARGS += $(2) $(1)) +endef + +# FIP_ADD_IMG allows the platform to specify an image to be packed in the FIP +# using a build option. It also adds a dependency on the image file, aborting +# the build if the file does not exist. +# $(1) = build option to specify the image filename (SCP_BL2, BL33, etc) +# $(2) = command line option for fiptool (scp_bl2, bl33, etc) +# Example: +# $(eval $(call FIP_ADD_IMG,BL33,--bl33)) +define FIP_ADD_IMG + CRT_DEPS += check_$(1) + FIP_DEPS += check_$(1) + $(call FIP_ADD_PAYLOAD,$(value $(1)),$(2)) + +check_$(1): + $$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file")) +endef + +# FWU_FIP_ADD_PAYLOAD appends the command line arguments required by fiptool +# to package a new FWU payload. Optionally, it adds the dependency on this payload +# $(1) = payload filename (e.g. ns_bl2u.bin) +# $(2) = command line option for the specified payload (e.g. --fwu) +# $(3) = fip target dependency (optional) (e.g. ns_bl2u) +define FWU_FIP_ADD_PAYLOAD + $(eval $(if $(3),FWU_FIP_DEPS += $(3))) + $(eval FWU_FIP_ARGS += $(2) $(1)) +endef + +# FWU_CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation +# $(1) = parameter filename +# $(2) = cert_create command line option for the specified parameter +# $(3) = input parameter (false if empty) +define FWU_CERT_ADD_CMD_OPT + $(eval $(if $(3),FWU_CRT_DEPS += $(1))) + $(eval FWU_CRT_ARGS += $(2) $(1)) +endef + +# FWU_FIP_ADD_IMG allows the platform to pack a binary image in the FWU FIP +# $(1) build option to specify the image filename (BL2U, NS_BL2U, etc) +# $(2) command line option for fiptool (bl2u, ns_bl2u, etc) +# Example: +# $(eval $(call FWU_FIP_ADD_IMG,BL2U,--bl2u)) +define FWU_FIP_ADD_IMG + FWU_CRT_DEPS += check_$(1) + FWU_FIP_DEPS += check_$(1) + $(call FWU_FIP_ADD_PAYLOAD,$(value $(1)),$(2)) + +check_$(1): + $$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file")) +endef + +################################################################################ +# Auxiliary macros to build TF images from sources +################################################################################ + +MAKE_DEP = -Wp,-MD,$(DEP) -MT $$@ -MP + +# MAKE_C builds a C source file and generates the dependency file +# $(1) = output directory +# $(2) = source file (%.c) +# $(3) = BL stage (2, 2u, 30, 31, 32, 33) +define MAKE_C + +$(eval OBJ := $(1)/$(patsubst %.c,%.o,$(notdir $(2)))) +$(eval DEP := $(patsubst %.o,%.d,$(OBJ))) +$(eval IMAGE := IMAGE_BL$(call uppercase,$(3))) + +$(OBJ): $(2) | bl$(3)_dirs + @echo " CC $$<" + $$(Q)$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -D$(IMAGE) $(MAKE_DEP) -c $$< -o $$@ + +-include $(DEP) + +endef + + +# MAKE_S builds an assembly source file and generates the dependency file +# $(1) = output directory +# $(2) = assembly file (%.S) +# $(3) = BL stage (2, 2u, 30, 31, 32, 33) +define MAKE_S + +$(eval OBJ := $(1)/$(patsubst %.S,%.o,$(notdir $(2)))) +$(eval DEP := $(patsubst %.o,%.d,$(OBJ))) +$(eval IMAGE := IMAGE_BL$(call uppercase,$(3))) + +$(OBJ): $(2) | bl$(3)_dirs + @echo " AS $$<" + $$(Q)$$(AS) $$(ASFLAGS) -D$(IMAGE) $(MAKE_DEP) -c $$< -o $$@ + +-include $(DEP) + +endef + + +# MAKE_LD generate the linker script using the C preprocessor +# $(1) = output linker script +# $(2) = input template +# $(3) = BL stage (2, 2u, 30, 31, 32, 33) +define MAKE_LD + +$(eval DEP := $(1).d) + +$(1): $(2) | bl$(3)_dirs + @echo " PP $$<" + $$(Q)$$(CPP) $$(CPPFLAGS) -P -D__ASSEMBLY__ -D__LINKER__ $(MAKE_DEP) -o $$@ $$< + +-include $(DEP) + +endef + + +# MAKE_OBJS builds both C and assembly source files +# $(1) = output directory +# $(2) = list of source files (both C and assembly) +# $(3) = BL stage (2, 30, 31, 32, 33) +define MAKE_OBJS + $(eval C_OBJS := $(filter %.c,$(2))) + $(eval REMAIN := $(filter-out %.c,$(2))) + $(eval $(foreach obj,$(C_OBJS),$(call MAKE_C,$(1),$(obj),$(3)))) + + $(eval S_OBJS := $(filter %.S,$(REMAIN))) + $(eval REMAIN := $(filter-out %.S,$(REMAIN))) + $(eval $(foreach obj,$(S_OBJS),$(call MAKE_S,$(1),$(obj),$(3)))) + + $(and $(REMAIN),$(error Unexpected source files present: $(REMAIN))) +endef + + +# NOTE: The line continuation '\' is required in the next define otherwise we +# end up with a line-feed characer at the end of the last c filename. +# Also bear this issue in mind if extending the list of supported filetypes. +define SOURCES_TO_OBJS + $(notdir $(patsubst %.c,%.o,$(filter %.c,$(1)))) \ + $(notdir $(patsubst %.S,%.o,$(filter %.S,$(1)))) +endef + + +# MAKE_TOOL_ARGS macro defines the command line arguments for fiptool for +# each BL image. Arguments: +# $(1) = BL stage (2, 30, 31, 32, 33) +# $(2) = Binary file +# $(3) = FIP command line option (if empty, image will not be included in the FIP) +define MAKE_TOOL_ARGS + $(if $(3),$(eval $(call FIP_ADD_PAYLOAD,$(2),--$(3),bl$(1)))) +endef + +# Allow overriding the timestamp, for example for reproducible builds, or to +# synchronize timestamps across multiple projects. +# This must be set to a C string (including quotes where applicable). +BUILD_MESSAGE_TIMESTAMP ?= __TIME__", "__DATE__ + +# MAKE_BL macro defines the targets and options to build each BL image. +# Arguments: +# $(1) = BL stage (2, 2u, 30, 31, 32, 33) +# $(2) = FIP command line option (if empty, image will not be included in the FIP) +define MAKE_BL + $(eval BUILD_DIR := ${BUILD_PLAT}/bl$(1)) + $(eval BL_SOURCES := $(BL$(call uppercase,$(1))_SOURCES)) + $(eval SOURCES := $(BL_SOURCES) $(BL_COMMON_SOURCES) $(PLAT_BL_COMMON_SOURCES)) + $(eval OBJS := $(addprefix $(BUILD_DIR)/,$(call SOURCES_TO_OBJS,$(SOURCES)))) + $(eval LINKERFILE := $(call IMG_LINKERFILE,$(1))) + $(eval MAPFILE := $(call IMG_MAPFILE,$(1))) + $(eval ELF := $(call IMG_ELF,$(1))) + $(eval DUMP := $(call IMG_DUMP,$(1))) + $(eval BIN := $(call IMG_BIN,$(1))) + $(eval BL_LINKERFILE := $(BL$(call uppercase,$(1))_LINKERFILE)) + # We use sort only to get a list of unique object directory names. + # ordering is not relevant but sort removes duplicates. + $(eval TEMP_OBJ_DIRS := $(sort $(dir ${OBJS} ${LINKERFILE}))) + # The $(dir ) function leaves a trailing / on the directory names + # Rip off the / to match directory names with make rule targets. + $(eval OBJ_DIRS := $(patsubst %/,%,$(TEMP_OBJ_DIRS))) + +# Create generators for object directory structure + +$(eval $(call MAKE_PREREQ_DIR,${BUILD_DIR},)) + +$(eval $(foreach objd,${OBJ_DIRS},$(call MAKE_PREREQ_DIR,${objd},${BUILD_DIR}))) + +.PHONY : bl${1}_dirs + +# We use order-only prerequisites to ensure that directories are created, +# but do not cause re-builds every time a file is written. +bl${1}_dirs: | ${OBJ_DIRS} + +$(eval $(call MAKE_OBJS,$(BUILD_DIR),$(SOURCES),$(1))) +$(eval $(call MAKE_LD,$(LINKERFILE),$(BL_LINKERFILE),$(1))) + +$(ELF): $(OBJS) $(LINKERFILE) | bl$(1)_dirs + @echo " LD $$@" +ifdef MAKE_BUILD_STRINGS + $(call MAKE_BUILD_STRINGS, $(BUILD_DIR)/build_message.o) +else + @echo 'const char build_message[] = "Built : "$(BUILD_MESSAGE_TIMESTAMP); \ + const char version_string[] = "${VERSION_STRING}";' | \ + $$(CC) $$(TF_CFLAGS) $$(CFLAGS) -xc -c - -o $(BUILD_DIR)/build_message.o +endif + $$(Q)$$(LD) -o $$@ $$(TF_LDFLAGS) $$(LDFLAGS) -Map=$(MAPFILE) \ + --script $(LINKERFILE) $(BUILD_DIR)/build_message.o $(OBJS) $(LDLIBS) + +$(DUMP): $(ELF) + @echo " OD $$@" + $${Q}$${OD} -dx $$< > $$@ + +$(BIN): $(ELF) + @echo " BIN $$@" + $$(Q)$$(OC) -O binary $$< $$@ + @${ECHO_BLANK_LINE} + @echo "Built $$@ successfully" + @${ECHO_BLANK_LINE} + +.PHONY: bl$(1) +bl$(1): $(BIN) $(DUMP) + +all: bl$(1) + +$(eval $(call MAKE_TOOL_ARGS,$(1),$(BIN),$(2))) + +endef + |