diff options
Diffstat (limited to 'plat/arm/common/arm_bl31_setup.c')
| -rw-r--r-- | plat/arm/common/arm_bl31_setup.c | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/plat/arm/common/arm_bl31_setup.c b/plat/arm/common/arm_bl31_setup.c new file mode 100644 index 00000000..8fba80b1 --- /dev/null +++ b/plat/arm/common/arm_bl31_setup.c @@ -0,0 +1,269 @@ +/* + * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <arch.h> +#include <arch_helpers.h> +#include <arm_def.h> +#include <assert.h> +#include <bl_common.h> +#include <console.h> +#include <debug.h> +#include <mmio.h> +#include <plat_arm.h> +#include <platform.h> + +#define BL31_END (uintptr_t)(&__BL31_END__) + +/* + * Placeholder variables for copying the arguments that have been passed to + * BL31 from BL2. + */ +static entry_point_info_t bl32_image_ep_info; +static entry_point_info_t bl33_image_ep_info; + + +/* Weak definitions may be overridden in specific ARM standard platform */ +#pragma weak bl31_early_platform_setup +#pragma weak bl31_platform_setup +#pragma weak bl31_plat_arch_setup +#pragma weak bl31_plat_get_next_image_ep_info + + +/******************************************************************************* + * Return a pointer to the 'entry_point_info' structure of the next image for the + * security state specified. BL33 corresponds to the non-secure image type + * while BL32 corresponds to the secure image type. A NULL pointer is returned + * if the image does not exist. + ******************************************************************************/ +entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type) +{ + entry_point_info_t *next_image_info; + + assert(sec_state_is_valid(type)); + next_image_info = (type == NON_SECURE) + ? &bl33_image_ep_info : &bl32_image_ep_info; + /* + * None of the images on the ARM development platforms can have 0x0 + * as the entrypoint + */ + if (next_image_info->pc) + return next_image_info; + else + return NULL; +} + +/******************************************************************************* + * Perform any BL31 early platform setup common to ARM standard platforms. + * Here is an opportunity to copy parameters passed by the calling EL (S-EL1 + * in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be + * done before the MMU is initialized so that the memory layout can be used + * while creating page tables. BL2 has flushed this information to memory, so + * we are guaranteed to pick up good data. + ******************************************************************************/ +#if LOAD_IMAGE_V2 +void arm_bl31_early_platform_setup(void *from_bl2, + void *plat_params_from_bl2) +#else +void arm_bl31_early_platform_setup(bl31_params_t *from_bl2, + void *plat_params_from_bl2) +#endif +{ + /* Initialize the console to provide early debug support */ + console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ, + ARM_CONSOLE_BAUDRATE); + +#if RESET_TO_BL31 + /* There are no parameters from BL2 if BL31 is a reset vector */ + assert(from_bl2 == NULL); + assert(plat_params_from_bl2 == NULL); + +#ifdef BL32_BASE + /* Populate entry point information for BL32 */ + SET_PARAM_HEAD(&bl32_image_ep_info, + PARAM_EP, + VERSION_1, + 0); + SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE); + bl32_image_ep_info.pc = BL32_BASE; + bl32_image_ep_info.spsr = arm_get_spsr_for_bl32_entry(); +#endif /* BL32_BASE */ + + /* Populate entry point information for BL33 */ + SET_PARAM_HEAD(&bl33_image_ep_info, + PARAM_EP, + VERSION_1, + 0); + /* + * Tell BL31 where the non-trusted software image + * is located and the entry state information + */ + bl33_image_ep_info.pc = plat_get_ns_image_entrypoint(); + + bl33_image_ep_info.spsr = arm_get_spsr_for_bl33_entry(); + SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); + +#else /* RESET_TO_BL31 */ + + /* + * In debug builds, we pass a special value in 'plat_params_from_bl2' + * to verify platform parameters from BL2 to BL31. + * In release builds, it's not used. + */ + assert(((unsigned long long)plat_params_from_bl2) == + ARM_BL31_PLAT_PARAM_VAL); + +# if LOAD_IMAGE_V2 + /* + * Check params passed from BL2 should not be NULL, + */ + bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2; + assert(params_from_bl2 != NULL); + assert(params_from_bl2->h.type == PARAM_BL_PARAMS); + assert(params_from_bl2->h.version >= VERSION_2); + + bl_params_node_t *bl_params = params_from_bl2->head; + + /* + * Copy BL33 and BL32 (if present), entry point information. + * They are stored in Secure RAM, in BL2's address space. + */ + while (bl_params) { + if (bl_params->image_id == BL32_IMAGE_ID) + bl32_image_ep_info = *bl_params->ep_info; + + if (bl_params->image_id == BL33_IMAGE_ID) + bl33_image_ep_info = *bl_params->ep_info; + + bl_params = bl_params->next_params_info; + } + + if (bl33_image_ep_info.pc == 0) + panic(); + +# else /* LOAD_IMAGE_V2 */ + + /* + * Check params passed from BL2 should not be NULL, + */ + assert(from_bl2 != NULL); + assert(from_bl2->h.type == PARAM_BL31); + assert(from_bl2->h.version >= VERSION_1); + + /* + * Copy BL32 (if populated by BL2) and BL33 entry point information. + * They are stored in Secure RAM, in BL2's address space. + */ + if (from_bl2->bl32_ep_info) + bl32_image_ep_info = *from_bl2->bl32_ep_info; + bl33_image_ep_info = *from_bl2->bl33_ep_info; + +# endif /* LOAD_IMAGE_V2 */ +#endif /* RESET_TO_BL31 */ +} + +#if LOAD_IMAGE_V2 +void bl31_early_platform_setup(void *from_bl2, + void *plat_params_from_bl2) +#else +void bl31_early_platform_setup(bl31_params_t *from_bl2, + void *plat_params_from_bl2) +#endif +{ + arm_bl31_early_platform_setup(from_bl2, plat_params_from_bl2); + + /* + * Initialize Interconnect for this cluster during cold boot. + * No need for locks as no other CPU is active. + */ + plat_arm_interconnect_init(); + + /* + * Enable Interconnect coherency for the primary CPU's cluster. + * Earlier bootloader stages might already do this (e.g. Trusted + * Firmware's BL1 does it) but we can't assume so. There is no harm in + * executing this code twice anyway. + * Platform specific PSCI code will enable coherency for other + * clusters. + */ + plat_arm_interconnect_enter_coherency(); +} + +/******************************************************************************* + * Perform any BL31 platform setup common to ARM standard platforms + ******************************************************************************/ +void arm_bl31_platform_setup(void) +{ + /* Initialize the GIC driver, cpu and distributor interfaces */ + plat_arm_gic_driver_init(); + plat_arm_gic_init(); + +#if RESET_TO_BL31 + /* + * Do initial security configuration to allow DRAM/device access + * (if earlier BL has not already done so). + */ + plat_arm_security_setup(); + +#endif /* RESET_TO_BL31 */ + + /* Enable and initialize the System level generic timer */ + mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF, + CNTCR_FCREQ(0) | CNTCR_EN); + + /* Allow access to the System counter timer module */ + arm_configure_sys_timer(); + + /* Initialize power controller before setting up topology */ + plat_arm_pwrc_setup(); +} + +/******************************************************************************* + * Perform any BL31 platform runtime setup prior to BL31 exit common to ARM + * standard platforms + ******************************************************************************/ +void arm_bl31_plat_runtime_setup(void) +{ + /* Initialize the runtime console */ + console_init(PLAT_ARM_BL31_RUN_UART_BASE, PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ, + ARM_CONSOLE_BAUDRATE); +} + +void bl31_platform_setup(void) +{ + arm_bl31_platform_setup(); +} + +void bl31_plat_runtime_setup(void) +{ + arm_bl31_plat_runtime_setup(); +} + +/******************************************************************************* + * Perform the very early platform specific architectural setup shared between + * ARM standard platforms. This only does basic initialization. Later + * architectural setup (bl31_arch_setup()) does not do anything platform + * specific. + ******************************************************************************/ +void arm_bl31_plat_arch_setup(void) +{ + arm_setup_page_tables(BL31_BASE, + BL31_END - BL31_BASE, + BL_CODE_BASE, + BL_CODE_END, + BL_RO_DATA_BASE, + BL_RO_DATA_END +#if USE_COHERENT_MEM + , BL_COHERENT_RAM_BASE, + BL_COHERENT_RAM_END +#endif + ); + enable_mmu_el3(0); +} + +void bl31_plat_arch_setup(void) +{ + arm_bl31_plat_arch_setup(); +} |