1 files changed, 355 insertions, 0 deletions
diff --git a/plat/qemu/qemu_bl2_setup.c b/plat/qemu/qemu_bl2_setup.c
new file mode 100644
index 00000000..60d96233
--- /dev/null
+++ b/plat/qemu/qemu_bl2_setup.c
@@ -0,0 +1,355 @@
+/*
+ * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <desc_image_load.h>
+#ifdef SPD_opteed
+#include <optee_utils.h>
+#endif
+#include <libfdt.h>
+#include <platform_def.h>
+#include <string.h>
+#include <utils.h>
+#include "qemu_private.h"
+
+/*
+ * The next 2 constants identify the extents of the code & RO data region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned.  It is the responsibility of the linker script to ensure that
+ * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
+ */
+#define BL2_RO_BASE (unsigned long)(&__RO_START__)
+#define BL2_RO_LIMIT (unsigned long)(&__RO_END__)
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+#if !LOAD_IMAGE_V2
+/*******************************************************************************
+ * This structure represents the superset of information that is passed to
+ * BL3-1, e.g. while passing control to it from BL2, bl31_params
+ * and other platform specific params
+ ******************************************************************************/
+typedef struct bl2_to_bl31_params_mem {
+	bl31_params_t bl31_params;
+	image_info_t bl31_image_info;
+	image_info_t bl32_image_info;
+	image_info_t bl33_image_info;
+	entry_point_info_t bl33_ep_info;
+	entry_point_info_t bl32_ep_info;
+	entry_point_info_t bl31_ep_info;
+} bl2_to_bl31_params_mem_t;
+
+
+static bl2_to_bl31_params_mem_t bl31_params_mem;
+
+
+meminfo_t *bl2_plat_sec_mem_layout(void)
+{
+	return &bl2_tzram_layout;
+}
+
+/*******************************************************************************
+ * This function assigns a pointer to the memory that the platform has kept
+ * aside to pass platform specific and trusted firmware related information
+ * to BL31. This memory is allocated by allocating memory to
+ * bl2_to_bl31_params_mem_t structure which is a superset of all the
+ * structure whose information is passed to BL31
+ * NOTE: This function should be called only once and should be done
+ * before generating params to BL31
+ ******************************************************************************/
+bl31_params_t *bl2_plat_get_bl31_params(void)
+{
+	bl31_params_t *bl2_to_bl31_params;
+
+	/*
+	 * Initialise the memory for all the arguments that needs to
+	 * be passed to BL3-1
+	 */
+	zeromem(&bl31_params_mem, sizeof(bl2_to_bl31_params_mem_t));
+
+	/* Assign memory for TF related information */
+	bl2_to_bl31_params = &bl31_params_mem.bl31_params;
+	SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
+
+	/* Fill BL3-1 related information */
+	bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
+		VERSION_1, 0);
+
+	/* Fill BL3-2 related information */
+	bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
+		VERSION_1, 0);
+	bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
+		VERSION_1, 0);
+
+	/* Fill BL3-3 related information */
+	bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
+		PARAM_EP, VERSION_1, 0);
+
+	/* BL3-3 expects to receive the primary CPU MPID (through x0) */
+	bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
+
+	bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
+		VERSION_1, 0);
+
+	return bl2_to_bl31_params;
+}
+
+/* Flush the TF params and the TF plat params */
+void bl2_plat_flush_bl31_params(void)
+{
+	flush_dcache_range((unsigned long)&bl31_params_mem,
+			sizeof(bl2_to_bl31_params_mem_t));
+}
+
+/*******************************************************************************
+ * This function returns a pointer to the shared memory that the platform
+ * has kept to point to entry point information of BL31 to BL2
+ ******************************************************************************/
+struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
+{
+#if DEBUG
+	bl31_params_mem.bl31_ep_info.args.arg1 = QEMU_BL31_PLAT_PARAM_VAL;
+#endif
+
+	return &bl31_params_mem.bl31_ep_info;
+}
+#endif /* !LOAD_IMAGE_V2 */
+
+
+
+void bl2_early_platform_setup(meminfo_t *mem_layout)
+{
+	/* Initialize the console to provide early debug support */
+	console_init(PLAT_QEMU_BOOT_UART_BASE, PLAT_QEMU_BOOT_UART_CLK_IN_HZ,
+			PLAT_QEMU_CONSOLE_BAUDRATE);
+
+	/* Setup the BL2 memory layout */
+	bl2_tzram_layout = *mem_layout;
+
+	plat_qemu_io_setup();
+}
+
+static void security_setup(void)
+{
+	/*
+	 * This is where a TrustZone address space controller and other
+	 * security related peripherals, would be configured.
+	 */
+}
+
+static void update_dt(void)
+{
+	int ret;
+	void *fdt = (void *)(uintptr_t)PLAT_QEMU_DT_BASE;
+
+	ret = fdt_open_into(fdt, fdt, PLAT_QEMU_DT_MAX_SIZE);
+	if (ret < 0) {
+		ERROR("Invalid Device Tree at %p: error %d\n", fdt, ret);
+		return;
+	}
+
+	if (dt_add_psci_node(fdt)) {
+		ERROR("Failed to add PSCI Device Tree node\n");
+		return;
+	}
+
+	if (dt_add_psci_cpu_enable_methods(fdt)) {
+		ERROR("Failed to add PSCI cpu enable methods in Device Tree\n");
+		return;
+	}
+
+	ret = fdt_pack(fdt);
+	if (ret < 0)
+		ERROR("Failed to pack Device Tree at %p: error %d\n", fdt, ret);
+}
+
+void bl2_platform_setup(void)
+{
+	security_setup();
+	update_dt();
+
+	/* TODO Initialize timer */
+}
+
+void bl2_plat_arch_setup(void)
+{
+	qemu_configure_mmu_el1(bl2_tzram_layout.total_base,
+			      bl2_tzram_layout.total_size,
+			      BL2_RO_BASE, BL2_RO_LIMIT,
+			      BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL32 entry
+ ******************************************************************************/
+static uint32_t qemu_get_spsr_for_bl32_entry(void)
+{
+	/*
+	 * The Secure Payload Dispatcher service is responsible for
+	 * setting the SPSR prior to entry into the BL3-2 image.
+	 */
+	return 0;
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+static uint32_t qemu_get_spsr_for_bl33_entry(void)
+{
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	mode = EL_IMPLEMENTED(2) ? MODE_EL2 : MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+#if LOAD_IMAGE_V2
+static int qemu_bl2_handle_post_image_load(unsigned int image_id)
+{
+	int err = 0;
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+#ifdef SPD_opteed
+	bl_mem_params_node_t *pager_mem_params = NULL;
+	bl_mem_params_node_t *paged_mem_params = NULL;
+#endif
+
+	assert(bl_mem_params);
+
+	switch (image_id) {
+# ifdef AARCH64
+	case BL32_IMAGE_ID:
+#ifdef SPD_opteed
+		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
+		assert(pager_mem_params);
+
+		paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
+		assert(paged_mem_params);
+
+		err = parse_optee_header(&bl_mem_params->ep_info,
+					 &pager_mem_params->image_info,
+					 &paged_mem_params->image_info);
+		if (err != 0) {
+			WARN("OPTEE header parse error.\n");
+		}
+
+		/*
+		 * OP-TEE expect to receive DTB address in x2.
+		 * This will be copied into x2 by dispatcher.
+		 */
+		bl_mem_params->ep_info.args.arg3 = PLAT_QEMU_DT_BASE;
+#endif
+		bl_mem_params->ep_info.spsr = qemu_get_spsr_for_bl32_entry();
+		break;
+# endif
+	case BL33_IMAGE_ID:
+		/* BL33 expects to receive the primary CPU MPID (through r0) */
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = qemu_get_spsr_for_bl33_entry();
+		break;
+	}
+
+	return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return qemu_bl2_handle_post_image_load(image_id);
+}
+
+#else /* LOAD_IMAGE_V2 */
+
+/*******************************************************************************
+ * Before calling this function BL3-1 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL3-1 and set SPSR and security state.
+ * On ARM standard platforms we only set the security state of the entrypoint
+ ******************************************************************************/
+void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info,
+					entry_point_info_t *bl31_ep_info)
+{
+	SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
+	bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+					DISABLE_ALL_EXCEPTIONS);
+}
+
+/*******************************************************************************
+ * Before calling this function BL3-2 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL3-2 and set SPSR and security state.
+ * On ARM standard platforms we only set the security state of the entrypoint
+ ******************************************************************************/
+void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
+					entry_point_info_t *bl32_ep_info)
+{
+	SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
+	bl32_ep_info->spsr = qemu_get_spsr_for_bl32_entry();
+}
+
+/*******************************************************************************
+ * Before calling this function BL3-3 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL3-3 and set SPSR and security state.
+ * On ARM standard platforms we only set the security state of the entrypoint
+ ******************************************************************************/
+void bl2_plat_set_bl33_ep_info(image_info_t *image,
+					entry_point_info_t *bl33_ep_info)
+{
+
+	SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
+	bl33_ep_info->spsr = qemu_get_spsr_for_bl33_entry();
+}
+
+/*******************************************************************************
+ * Populate the extents of memory available for loading BL32
+ ******************************************************************************/
+void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
+{
+	/*
+	 * Populate the extents of memory available for loading BL32.
+	 */
+	bl32_meminfo->total_base = BL32_BASE;
+	bl32_meminfo->free_base = BL32_BASE;
+	bl32_meminfo->total_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE;
+	bl32_meminfo->free_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE;
+}
+
+/*******************************************************************************
+ * Populate the extents of memory available for loading BL33
+ ******************************************************************************/
+void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
+{
+	bl33_meminfo->total_base = NS_DRAM0_BASE;
+	bl33_meminfo->total_size = NS_DRAM0_SIZE;
+	bl33_meminfo->free_base = NS_DRAM0_BASE;
+	bl33_meminfo->free_size = NS_DRAM0_SIZE;
+}
+#endif /* !LOAD_IMAGE_V2 */
+
+unsigned long plat_get_ns_image_entrypoint(void)
+{
+	return NS_IMAGE_OFFSET;
+}