diff options
Diffstat (limited to 'plat/xilinx/zynqmp/pm_service/pm_defs.h')
-rw-r--r-- | plat/xilinx/zynqmp/pm_service/pm_defs.h | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/plat/xilinx/zynqmp/pm_service/pm_defs.h b/plat/xilinx/zynqmp/pm_service/pm_defs.h new file mode 100644 index 00000000..ba0c52a0 --- /dev/null +++ b/plat/xilinx/zynqmp/pm_service/pm_defs.h @@ -0,0 +1,215 @@ +/* + * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/* ZynqMP power management enums and defines */ + +#ifndef _PM_DEFS_H_ +#define _PM_DEFS_H_ + +/********************************************************************* + * Macro definitions + ********************************************************************/ + +/* + * Version number is a 32bit value, like: + * (PM_VERSION_MAJOR << 16) | PM_VERSION_MINOR + */ +#define PM_VERSION_MAJOR 0 +#define PM_VERSION_MINOR 2 + +#define PM_VERSION ((PM_VERSION_MAJOR << 16) | PM_VERSION_MINOR) + +/* Capabilities for RAM */ +#define PM_CAP_ACCESS 0x1U +#define PM_CAP_CONTEXT 0x2U + +#define MAX_LATENCY (~0U) +#define MAX_QOS 100U + +/* State arguments of the self suspend */ +#define PM_STATE_CPU_IDLE 0x0U +#define PM_STATE_SUSPEND_TO_RAM 0xFU + +/********************************************************************* + * Enum definitions + ********************************************************************/ + +enum pm_api_id { + /* Miscellaneous API functions: */ + PM_GET_API_VERSION = 1, /* Do not change or move */ + PM_SET_CONFIGURATION, + PM_GET_NODE_STATUS, + PM_GET_OP_CHARACTERISTIC, + PM_REGISTER_NOTIFIER, + /* API for suspending of PUs: */ + PM_REQ_SUSPEND, + PM_SELF_SUSPEND, + PM_FORCE_POWERDOWN, + PM_ABORT_SUSPEND, + PM_REQ_WAKEUP, + PM_SET_WAKEUP_SOURCE, + PM_SYSTEM_SHUTDOWN, + /* API for managing PM slaves: */ + PM_REQ_NODE, + PM_RELEASE_NODE, + PM_SET_REQUIREMENT, + PM_SET_MAX_LATENCY, + /* Direct control API functions: */ + PM_RESET_ASSERT, + PM_RESET_GET_STATUS, + PM_MMIO_WRITE, + PM_MMIO_READ, + PM_INIT, + PM_FPGA_LOAD, + PM_FPGA_GET_STATUS, + PM_GET_CHIPID, + PM_API_MAX +}; + +enum pm_node_id { + NODE_UNKNOWN = 0, + NODE_APU, + NODE_APU_0, + NODE_APU_1, + NODE_APU_2, + NODE_APU_3, + NODE_RPU, + NODE_RPU_0, + NODE_RPU_1, + NODE_PL, + NODE_FPD, + NODE_OCM_BANK_0, + NODE_OCM_BANK_1, + NODE_OCM_BANK_2, + NODE_OCM_BANK_3, + NODE_TCM_0_A, + NODE_TCM_0_B, + NODE_TCM_1_A, + NODE_TCM_1_B, + NODE_L2, + NODE_GPU_PP_0, + NODE_GPU_PP_1, + NODE_USB_0, + NODE_USB_1, + NODE_TTC_0, + NODE_TTC_1, + NODE_TTC_2, + NODE_TTC_3, + NODE_SATA, + NODE_ETH_0, + NODE_ETH_1, + NODE_ETH_2, + NODE_ETH_3, + NODE_UART_0, + NODE_UART_1, + NODE_SPI_0, + NODE_SPI_1, + NODE_I2C_0, + NODE_I2C_1, + NODE_SD_0, + NODE_SD_1, + NODE_DP, + NODE_GDMA, + NODE_ADMA, + NODE_NAND, + NODE_QSPI, + NODE_GPIO, + NODE_CAN_0, + NODE_CAN_1, + NODE_AFI, + NODE_APLL, + NODE_VPLL, + NODE_DPLL, + NODE_RPLL, + NODE_IOPLL, + NODE_DDR, + NODE_IPI_APU, + NODE_IPI_RPU_0, + NODE_GPU, + NODE_PCIE, + NODE_PCAP, + NODE_RTC, + NODE_MAX +}; + +enum pm_request_ack { + REQ_ACK_NO = 1, + REQ_ACK_BLOCKING, + REQ_ACK_NON_BLOCKING, +}; + +enum pm_abort_reason { + ABORT_REASON_WKUP_EVENT = 100, + ABORT_REASON_PU_BUSY, + ABORT_REASON_NO_PWRDN, + ABORT_REASON_UNKNOWN, +}; + +enum pm_suspend_reason { + SUSPEND_REASON_PU_REQ = 201, + SUSPEND_REASON_ALERT, + SUSPEND_REASON_SYS_SHUTDOWN, +}; + +enum pm_ram_state { + PM_RAM_STATE_OFF = 1, + PM_RAM_STATE_RETENTION, + PM_RAM_STATE_ON, +}; + +enum pm_opchar_type { + PM_OPCHAR_TYPE_POWER = 1, + PM_OPCHAR_TYPE_TEMP, + PM_OPCHAR_TYPE_LATENCY, +}; + +/** + * @PM_RET_SUCCESS: success + * @PM_RET_ERROR_ARGS: illegal arguments provided + * @PM_RET_ERROR_ACCESS: access rights violation + * @PM_RET_ERROR_TIMEOUT: timeout in communication with PMU + * @PM_RET_ERROR_NOTSUPPORTED: feature not supported + * @PM_RET_ERROR_PROC: node is not a processor node + * @PM_RET_ERROR_API_ID: illegal API ID + * @PM_RET_ERROR_OTHER: other error + */ +enum pm_ret_status { + PM_RET_SUCCESS, + PM_RET_ERROR_ARGS, + PM_RET_ERROR_ACCESS, + PM_RET_ERROR_TIMEOUT, + PM_RET_ERROR_NOTSUPPORTED, + PM_RET_ERROR_PROC, + PM_RET_ERROR_API_ID, + PM_RET_ERROR_FAILURE, + PM_RET_ERROR_COMMUNIC, + PM_RET_ERROR_DOUBLEREQ, + PM_RET_ERROR_OTHER, +}; + +/** + * @PM_INITIAL_BOOT: boot is a fresh system startup + * @PM_RESUME: boot is a resume + * @PM_BOOT_ERROR: error, boot cause cannot be identified + */ +enum pm_boot_status { + PM_INITIAL_BOOT, + PM_RESUME, + PM_BOOT_ERROR, +}; + +enum pm_shutdown_type { + PMF_SHUTDOWN_TYPE_SHUTDOWN, + PMF_SHUTDOWN_TYPE_RESET, +}; + +enum pm_shutdown_subtype { + PMF_SHUTDOWN_SUBTYPE_SUBSYSTEM, + PMF_SHUTDOWN_SUBTYPE_PS_ONLY, + PMF_SHUTDOWN_SUBTYPE_SYSTEM, +}; + +#endif /* _PM_DEFS_H_ */ |