rb5: Add support for Qcom Robotics RB5 development kitandroid-s-beta-5android-s-beta-5

* Add new lunch target "rb5-userdebug"
* Boots android-mainline (3aa53d85a061) to UI
* ADB works
* If you are having display issues on your brand new RB5
  kit then run the following set of adb commands to update
  the lt9611uxc firmware version:
    adb wait-for-device; adb root;
    adb shell "echo 1 > /sys/bus/i2c/devices/5-002b/lt9611uxc_firmware"
  Check installer/rb5/README for more details.

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Change-Id: I2917de0375e95e17a88446474fdb256af769f73d

3 files changed, 104 insertions, 0 deletions

diff --git a/rb5/BoardConfig.mk b/rb5/BoardConfig.mk
new file mode 100644
index 0000000..415cff1
--- /dev/null
+++ b/rb5/BoardConfig.mk
@@ -0,0 +1,30 @@
+include device/linaro/dragonboard/BoardConfigCommon.mk
+
+# Board Information
+TARGET_BOOTLOADER_BOARD_NAME := rb5
+TARGET_BOARD_PLATFORM := rb5
+
+TARGET_NO_KERNEL := false
+BOARD_KERNEL_BASE := 0x80000000
+BOARD_KERNEL_PAGESIZE := 4096
+
+BOARD_INCLUDE_DTB_IN_BOOTIMG := true
+BOARD_BOOT_HEADER_VERSION := 3
+BOARD_MKBOOTIMG_ARGS := --header_version $(BOARD_BOOT_HEADER_VERSION)
+
+BOARD_KERNEL_CMDLINE := earlycon firmware_class.path=/vendor/firmware/ androidboot.hardware=rb5
+BOARD_KERNEL_CMDLINE += init=/init androidboot.boot_devices=soc@0/1d84000.ufshc printk.devkmsg=on
+BOARD_KERNEL_CMDLINE += pcie_pme=nomsi #For WiFi to work
+BOARD_KERNEL_CMDLINE += deferred_probe_timeout=30
+
+# Image Configuration
+BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864 #64M
+BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE := 67108864 #64M
+BOARD_USERDATAIMAGE_PARTITION_SIZE := 21474836480
+BOARD_FLASH_BLOCK_SIZE := 131072
+
+# Super/Dynamic partition
+BOARD_SUPER_PARTITION_SIZE := 12437225472
+BOARD_DB_DYNAMIC_PARTITIONS_SIZE := 12433031168 # Reserve 4M for DAP metadata
+BOARD_SUPER_PARTITION_METADATA_DEVICE := super
+BOARD_SUPER_IMAGE_IN_UPDATE_PACKAGE := true
diff --git a/rb5/device.mk b/rb5/device.mk
new file mode 100644
index 0000000..cab614f
--- /dev/null
+++ b/rb5/device.mk
@@ -0,0 +1,69 @@
+#
+# Copyright (C) 2011 The Android Open-Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+PRODUCT_SOONG_NAMESPACES += \
+    device/linaro/dragonboard
+
+# setup dalvik vm configs
+$(call inherit-product, frameworks/native/build/tablet-10in-xhdpi-2048-dalvik-heap.mk)
+
+# Enable Virtual A/B
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS += \
+    product \
+    system \
+    system_ext \
+    vendor
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota/launch_with_vendor_ramdisk.mk)
+
+PRODUCT_COPY_FILES := \
+    $(RB5_KERNEL_DIR)/Image.gz:kernel \
+    $(RB5_KERNEL_DIR)/qrb5165-rb5.dtb:dtb.img \
+    $(LOCAL_PATH)/mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths.xml \
+    device/linaro/dragonboard/fstab.common:$(TARGET_COPY_OUT_RAMDISK)/fstab.rb5 \
+    device/linaro/dragonboard/fstab.common:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.rb5 \
+    device/linaro/dragonboard/init.common.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.rb5.rc \
+    device/linaro/dragonboard/init.common.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.rb5.usb.rc \
+    device/linaro/dragonboard/common.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/rb5.kl
+
+# Build generic Audio HAL
+PRODUCT_PACKAGES := audio.primary.rb5
+
+# BootControl HAL
+PRODUCT_PACKAGES += \
+    android.hardware.boot@1.2-impl \
+    android.hardware.boot@1.2-impl.recovery \
+    android.hardware.boot@1.2-service
+
+PRODUCT_PACKAGES += \
+    pd-mapper \
+    qrtr-ns \
+    qrtr-cfg \
+    qrtr-lookup \
+    rmtfs \
+    tqftpserv
+
+PRODUCT_COPY_FILES += \
+    device/linaro/dragonboard/qcom/init.qcom.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.qcom.rc
+
+PRODUCT_VENDOR_PROPERTIES += ro.soc.manufacturer=Qualcomm
+PRODUCT_VENDOR_PROPERTIES += ro.soc.model=QRB5165
+
+PRODUCT_PROPERTY_OVERRIDES += ro.sf.lcd_density=160
+
+# Copy firmware files
+$(call inherit-product-if-exists, $(LOCAL_PATH)/firmware/device.mk)
diff --git a/rb5/mixer_paths.xml b/rb5/mixer_paths.xml
new file mode 100644
index 0000000..86e67fc
--- /dev/null
+++ b/rb5/mixer_paths.xml
@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<mixer>
+	<!-- Enable HDMI out -->
+	<ctl name="TERT_MI2S_RX Audio Mixer MultiMedia1" value="1" />
+</mixer>