diff options
author | Android Build Coastguard Worker <android-build-coastguard-worker@google.com> | 2022-05-10 06:53:22 +0000 |
---|---|---|
committer | Android Build Coastguard Worker <android-build-coastguard-worker@google.com> | 2022-05-10 06:53:22 +0000 |
commit | 62eb0d31197a05c29a259ebb799e10b15d44c7c0 (patch) | |
tree | 90aacb633d142c11c6922b13965018a37799de0e /installer/hikey/README | |
parent | 0f093620bf86767800575bbd7644fde3c29963b1 (diff) | |
parent | 9f8b1d25aaf497ac7a04690a235050323519aecb (diff) | |
download | hikey-62eb0d31197a05c29a259ebb799e10b15d44c7c0.tar.gz |
Snap for 8564071 from 9f8b1d25aaf497ac7a04690a235050323519aecb to mainline-adbd-releaseaml_adb_331610000aml_adb_331314020aml_adb_331113120aml_adb_331011050aml_adb_331011040android13-mainline-adbd-release
Change-Id: Ic21b625c802fd8f54b4ed6e1960cff57162eaa3a
Diffstat (limited to 'installer/hikey/README')
-rw-r--r-- | installer/hikey/README | 38 |
1 files changed, 0 insertions, 38 deletions
diff --git a/installer/hikey/README b/installer/hikey/README deleted file mode 100644 index b58cd96a..00000000 --- a/installer/hikey/README +++ /dev/null @@ -1,38 +0,0 @@ -These instruction should help you in flashing the bootloader -and AOSP images built from sources. -Detailed instructions on how to setup the Board can be found -here: -https://github.com/96boards/documentation/wiki/HiKeyGettingStarted - -For flashing the bootloader, the top two links should be installed -(closed) and the 3rd link should be removed (open): - ---------------------------------------------------------- -| Name | Link | State | -| Auto Power up | Link 1-2 | closed | -| Boot Select | Link 3-4 | closed | -| GPIO3-1 | Link 5-6 | open | ---------------------------------------------------------- - -Link 1-2 causes HiKey to auto-power up when power is installed. Link -3-4 causes the HiKey SoC internal ROM to start up in at a special -"install bootloader" mode which will install a supplied bootloader -from the microUSB OTG port into RAM, and will present itself to a -connected PC as a ttyUSB device. - -Note: The HiKey board will remain in USB load mode for 90 seconds -from power up. If you take longer than 90 seconds to start the install -then power cycle the board before trying again. - -Wait about 5 seconds and then check that the HiKey board has been -recognized by your Linux PC: -$ ls /dev/ttyUSB* -or -$ dmesg - - -Run the flash-all.sh script after building AOSP for hikey with the right -right UART recognised in the above command: -$ ./flash-all.sh /dev/ttyUSBX [4g] - -Remove the link 3-4 and power on the board. |