Cleanup: removed directory qnx/src/ipc3x_dev/perfutils

Signed-off-by: VW <vwan@ti.com>

7 files changed, 1 insertions, 1070 deletions

diff --git a/qnx/src/ipc3x_dev/perfutils/Makefile b/qnx/src/ipc3x_dev/perfutils/Makefile
deleted file mode 100644
index 8160dcd..0000000
--- a/qnx/src/ipc3x_dev/perfutils/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-#   Copyright (c) 2013, Texas Instruments Incorporated
-#
-#   Redistribution and use in source and binary forms, with or without
-#   modification, are permitted provided that the following conditions
-#   are met:
-#
-#   *  Redistributions of source code must retain the above copyright
-#      notice, this list of conditions and the following disclaimer.
-#
-#   *  Redistributions in binary form must reproduce the above copyright
-#      notice, this list of conditions and the following disclaimer in the
-#      documentation and/or other materials provided with the distribution.
-#
-#   *  Neither the name of Texas Instruments Incorporated nor the names of
-#      its contributors may be used to endorse or promote products derived
-#      from this software without specific prior written permission.
-#
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-#   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-#   THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#   PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-#   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#   OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#   OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-#   EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-include recurse.mk
diff --git a/qnx/src/ipc3x_dev/perfutils/PerfUtils.c b/qnx/src/ipc3x_dev/perfutils/PerfUtils.c
deleted file mode 100644
index b7d9c85..0000000
--- a/qnx/src/ipc3x_dev/perfutils/PerfUtils.c
+++ /dev/null
@@ -1,797 +0,0 @@
-/**
- *  @file   PerfUtils.c
- *
- *  @brief     This modules provides functions for measuring performance
- *
- *  ============================================================================
- *
- *  Copyright (c) 2009-2012, Texas Instruments Incorporated
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *  *  Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *  *  Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in the
- *     documentation and/or other materials provided with the distribution.
- *
- *  *  Neither the name of Texas Instruments Incorporated nor the names of
- *     its contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- *  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- *  PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- *  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- *  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- *  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- *  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- *  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- *  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *  Contact information for paper mail:
- *  Texas Instruments
- *  Post Office Box 655303
- *  Dallas, Texas 75265
- *  Contact information:
- *  http://www-k.ext.ti.com/sc/technical-support/product-information-centers.htm?
- *  DCMP=TIHomeTracking&HQS=Other+OT+home_d_contact
- *  ============================================================================
- *
- */
-
-/* Linux specific header files */
-#include <sys/time.h>
-/* Standard headers */
-#include <stdlib.h>
-#include <string.h>
-
-/* OSAL & Utils headers */
-#include <PerfUtils.h>
-
-/* Linux specific header files */
-#include <sys/types.h>
-#include <sys/ioctl.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/mman.h>
-/* OSAL & Utils headers */
-#include <stdint.h>
-
-
-#define SYSM3_PROC 2
-#define APPM3_PROC 3
-/* PERF UTILS ERROR CODES  START        */
-/*Reserved index CML4 clock*/
-typedef enum perf_util_index{
- PERF_UTIL_KERNEL_INDEX = 0,
- PERF_UTIL_GPTIMER_INDEX,
- PERF_UTIL_SYSCLK_INDEX,
- PERF_UTILS_CML4_INDEX,
- PERF_UTILS_MAX_IDENX ,
- PERF_UTILS_RECORDS_INDEX = -2
-}perf_util_index;
-
-//#define PERF_UTILS_DEBUG_SUPPORT 1
-#define PERF_UTILS_SUCCESS             (0)
-#define PERF_UTILS_FAILURE             (-1)
-#define PERF_UTILS_INIT_FAILED         (-2)
-#define PERF_UTILS_GPTIMER_TEN         (10)
-//#define PERF_UTILS_DEBUG_SUPPORT 1
-#define SYSLINK_MEM_IPC_HEAP2_ADDR 0x97FAA000
-/* 6K memory mapping for perfutils*/
-#define SYSLINK_MEM_IPC_HEAP2_SIZE ((MAX_NUM_KERNELSPACE_RECORDS) * (sizeof(Perf_FunctionRecord)))
-//#define SYSLINK_MEM_IPC_HEAP2_SIZE 0x2900
-/* PERF UTILS ERROR CODES  END          */
-
-/* GENERIC MACROS TO ACCESS GPTIMER REGISTERS */
-#define REG(MODULE,MODULENO,NAME,BASEADDR) \
-        REG_OFFSET(MODULE##MODULENO, _##NAME,BASEADDR)
-//#define REG_OFFSET(CMODULE_NO,NAME) REG_ADDR(CMODULE_NO##NAME##REG_OFFSET,CMODULE_NO##_MODULE_BASE##_ADDR)
-#define REG_OFFSET(CMODULE_NO, NAME,BASEADDR) \
-        REG_ADDR(CMODULE_NO##NAME##REG_OFFSET,BASEADDR)
-
-#define REG_ADDR(OFFSET, BASE)   ((OFFSET) + (BASE))
-
-/* GP TIMER REGISTER ADDRESSES AND OFFSET           */
-#define GPTIMER_MODULE_REGSET_SIZE          0x00000058
-#define GPTIMER_CTRLREG_AR_BIT_POS          0x00000001
-#define GPTIMER_CTRLREG_PTV_BIT_POS         0x00000002
-#define GPTIMER_CTRLREG_PRE_BIT_POS         0x00000005
-#define GPTIMER_CTRLREG_ST_BIT_POS          0x00000000
-
-/* GP TIMER 10                                      */
-#define GPTIMER10_MODULE_BASE_ADDR          0x48086000
-#if defined (SYSLINK_PLATFORM_OMAP4430)
-#define GPTIMER10_CTRLREG_OFFSET            0x00000009
-#define GPTIMER10_CRRREG_OFFSET             0x0000000a
-#define GPTIMER10_LDRREG_OFFSET             0x0000000b
-#elif defined(SYSLINK_PLATFORM_OMAP5430)
-#define GPTIMER10_CTRLREG_OFFSET            0x0000000e
-#define GPTIMER10_CRRREG_OFFSET             0x0000000f
-#define GPTIMER10_LDRREG_OFFSET             0x00000010
-#endif
-
-/*GP TIMER 9                                        */
-#define GPTIMER9_MODULE_BASE_ADDR           0x4803E000
-#define GPIMER9_CLRREG_OFFSET               0x00000038
-#define GPTIMER9_CRRREG_OFFSET              0x0000003C
-#define GPTIMER9_LDRREG_OFFSET              0x00000040
-
-/* L4PER_CM2 registers  */
-#define CM_L4PER_GPTIMER_BASE_ADDR           0x4A009400
-#if defined(SYSLINK_PLATFORM_OMAP4430)
-#define CM_SYS_CLKSEL_REG                    0x4A306110
-#elif defined(SYSLINK_PLATFORM_OMAP5430)
-#define CM_SYS_CLKSEL_REG                    0x4AE06110
-#endif
-#define CM_L4PER_GPTIMER_REGSET_SIZE         0x00000030
-#define CM_L4PER_GPTIMER10_CLKCTRLREG_OFFSET 0x0000000A
-#define CM_L4PER_GPTIMER10_CLKCTRLREG        0x4A009428
-#define CM_L4PER_GPTIMER10_CLKCTRLREG_SIZE   0x00000004
-
-#define SYS_CLK_UNINITIALIZED                0x0000000
-#define SYS_CLK_12MHZ_FREQ                   0x0B71B00
-#define SYS_CLK_13MHZ_FREQ                   0x0C65D40
-#define SYS_CLK_16_8MHZ_FREQ                 0x1005900
-#define SYS_CLK_19_2MHZ_FREQ                 0x124F800
-#define SYS_CLK_26MHZ_FREQ                   0x18CBA80
-#define SYS_CLK_27MHZ_FREQ                   0x19BFCC0
-#define SYS_CLK_38_4MHZ_FREQ                 0x249F000
-#define CONV_FACTOR_SEC_TO_USEC              1000000
-
-// Must match struct definition on Ducati side
-#define MAX_NUM_USERSPACE_RECORDS   10
-#define MAX_NUM_KERNELSPACE_RECORDS 5
-
-typedef struct {
-    unsigned int numEntries;
-    unsigned int enterTimes[MAX_ENTRIES_PER_FUNCTION];
-    unsigned int exitTimes[MAX_ENTRIES_PER_FUNCTION];
-    char fxnName[128];
-    unsigned int client_proc;
-    unsigned int server_proc;
-    unsigned int msg_size;
-} Perf_FunctionRecord;
-
-typedef struct
-{
-    unsigned int numEntries;
-    struct timeval enterTimes[MAX_ENTRIES_PER_FUNCTION];
-    struct timeval exitTimes[MAX_ENTRIES_PER_FUNCTION];
-    char fxnName[128];
-    unsigned int client_proc;
-    unsigned int server_proc;
-    unsigned int msg_size;
-} Perf_LocalRecord;
-
-#ifdef USE_GPTIMER
-static Perf_FunctionRecord perfRecordsArr[MAX_NUM_USERSPACE_RECORDS];
-static Perf_FunctionRecord *perfRecordsUserSpace;
-#else
-static Perf_LocalRecord    perfRecordsArr[MAX_NUM_USERSPACE_RECORDS];
-static Perf_LocalRecord *perfRecordsUserSpace;
-#endif
-
-typedef struct
-{
-    unsigned int enablePrescale:1;
-    unsigned int enableautoReload:1;
-    unsigned int valuePrescalar:3;
-    unsigned int gpTimer:4;
-}Perf_GptimerConfig;
-
-typedef struct Memory_MapInfo_tag {
-    unsigned int   src;
-    /*!< Address to be mapped. */
-    unsigned int   size;
-    /*!< Size of memory region to be mapped. */
-    unsigned int   dst;
-    /*!< Mapped address. */
-} Memory_MapInfo ;
-
-static Memory_MapInfo memoryMap[PERF_UTILS_MAX_IDENX];
-
-static volatile unsigned int* addrGptimerCtrlReg;
-static volatile unsigned int* addrGptimerReadReg;
-static volatile unsigned int* addrGptimerLoadReg;
-static volatile unsigned int* addrGptimerBaseReg;
-static volatile unsigned int* addrCmSysClkSelReg;
-static volatile unsigned int* timeStampUserSpace;
-static volatile unsigned int* addrCmL4GptimerBaseReg;
-static volatile unsigned int* addrCmL4PGptimerCtrlReg;
-
-static unsigned int sysClockFreq;
-static unsigned int valuePrescalar;
-
-static unsigned int
-OsalDrv_ioMap (unsigned int addr, unsigned int size)
-{
-    unsigned int pageSize = getpagesize ();
-    unsigned int taddr;
-    unsigned int tsize;
-    uintptr_t * userAddr = NULL;
-
-	taddr = addr;
-	tsize = size;
-	/* Align the physical address to page boundary */
-	tsize = tsize + (taddr % pageSize);
-	taddr = taddr - (taddr % pageSize);
-	userAddr = (uintptr_t *)mmap_device_io(tsize, taddr);
-	if (userAddr == (uintptr_t *) MAP_FAILED) {
-		userAddr = NULL;
-		perror ("Failed to map memory to user space with mmap_device_io!");
-	}
-	else {
-		/* Change the user address to reflect the actual user address of
-		 * memory block mapped. This is done since during mmap memory block
-		 * was shifted (+-) so that it is aligned to page boundary.
-		 */
-		taddr = (unsigned int)userAddr;
-		taddr = taddr + (addr % pageSize);
-	}
-
-    return taddr;
-}
-
-
-/*!
- *  @brief  Function to unmap a memory region specific to the driver.
- *
- *  @sa     OsalDrv_close,OsalDrv_open,OsalDrv_map
- */
-static void
-OsalDrv_ioUnmap (unsigned int addr, unsigned int size)
-{
-    unsigned int pageSize = getpagesize ();
-    unsigned int taddr;
-    unsigned int tsize;
-    unsigned int status;
-
-	taddr = addr;
-	tsize = size;
-
-	/* Get the actual user address and size. Since these are modified at the
-	 * time of mmaping, to have memory block page boundary aligned.
-	 */
-	tsize = tsize + (taddr % pageSize);
-	taddr = taddr - (taddr % pageSize);
-	status = munmap_device_io((uintptr_t) taddr, tsize);
-	if (status == -1) {
-		perror ("Failed to unmap memory with munmap_device_io! ");
-	}
-}
-
-/*========= PerfUtils_calcSysClkFreq============
- * read the status from CM_SYS_CLK_REG
- * and will map that value to sys freq
- */
-static
-unsigned int PerfUtils_calcSysClkFreq (void)
-{
-    unsigned int reg;
-    unsigned int sysClkFreq;
-    static int statusInit = 0;
-    Memory_MapInfo *cmSysClkSel;
-
-    cmSysClkSel = &(memoryMap[PERF_UTIL_SYSCLK_INDEX]);
-    cmSysClkSel->src  = CM_SYS_CLKSEL_REG;
-    cmSysClkSel->size = 0x4;
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_calcSysClkFreq :Enter\n");
-#endif
-    if (0 == statusInit) {
-
-       cmSysClkSel->dst = OsalDrv_ioMap (cmSysClkSel->src, cmSysClkSel->size);
-        if(cmSysClkSel->dst == NULL) {
-            printf("PerfUtils_calcSysClkFreq: Memory_map failed"
-                                         "returned [0x%x]\n", errno);
-            return -1;
-         }
-        statusInit = 1;
-    }
-
-    printf ("PerfUtils_calcSysClkFreq :Enter1\n");
-    addrCmSysClkSelReg = (unsigned int*)cmSysClkSel->dst;
-    printf ("PerfUtils_calcSysClkFreq :Enter2\n");
-    reg = (unsigned int)*addrCmSysClkSelReg;
-    printf ("PerfUtils_calcSysClkFreq :Enter3\n");
-    //reg &= 0x00000007;
-
-    printf ("PerfUtils_calcSysClkFreq :Enter4\n");
-#if 0
-    switch (reg) {
-        case 0 :
-                sysClkFreq = SYS_CLK_UNINITIALIZED;
-                break;
-        case 1 :
-                sysClkFreq = SYS_CLK_12MHZ_FREQ;
-                break;
-        case 2 :
-                sysClkFreq = SYS_CLK_13MHZ_FREQ;
-                break;
-        case 3 :
-                sysClkFreq = SYS_CLK_16_8MHZ_FREQ;
-                break;
-        case 4 :
-                sysClkFreq = SYS_CLK_19_2MHZ_FREQ;
-                break;
-        case 5 :
-                sysClkFreq = SYS_CLK_26MHZ_FREQ;
-                break;
-        case 6 :
-                sysClkFreq = SYS_CLK_27MHZ_FREQ;
-                break;
-        case 7 :
-                sysClkFreq = SYS_CLK_38_4MHZ_FREQ;
-                break;
-    }
-#endif
-                sysClkFreq = SYS_CLK_38_4MHZ_FREQ;
-
-    OsalDrv_ioUnmap(cmSysClkSel->dst, cmSysClkSel->size);
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf("SysClk is cloking @ [%d]\n",sysClkFreq);
-    printf ("PerfUtils_calcSysClkFreq :Leave\n");
-#endif
-    return sysClkFreq;
-}
-/*
- *========= PerfUtils_setRegValue==============
- * Generic function for writing value to register
- */
-static inline
-void PerfUtils_setRegValue (volatile unsigned int *addrReg, unsigned int bitPos,
-                                        unsigned int noBits, unsigned int value)
-{
-    unsigned int valueTmp = 0xFFFFFFFF;
-    unsigned int valueMask = (0x1 << noBits);
-    unsigned int valueStore;
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_setRegValue:Enter addrReg:[%x] *addrReg[%x] bitPos:[%x]\n"
-                  "noBits:[%x] value:[%x]\n", (unsigned int)addrReg, (unsigned int)*addrReg, bitPos, noBits, value);
-#endif
-    valueMask -= 1;
-
-    if (0 == value) {
-        valueTmp ^= ((valueMask << bitPos));
-        *(addrReg) &= valueTmp;
-    }
-    else {
-        valueStore =  (value << bitPos);
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-        printf ("PerfUtils_setRegValue:Writing value [%x] to [%x]\n",
-                                                       valueStore,(unsigned int)addrReg);
-#endif
-        *(addrReg) |= valueStore;
-    }
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_setRegValue:Leave addrReg:[%x] *addrReg[%x] bitPos:[%x]\n"
-                  "noBits:[%x] value:[%x]\n", (unsigned int)addrReg, (unsigned int)*addrReg, bitPos, noBits, value);
-#endif
-
-}
-/*
- *============= PerfUtils_gptimerModuleConfig===========
- * Configure the gptimer module for autoreload,prescalar
- */
-static
-int PerfUtils_gptimerModuleConfig (Perf_GptimerConfig *gptimerConfig)
-{
-
-    Memory_MapInfo *gptimerModConf;
-    int status = PERF_UTILS_SUCCESS;
-    unsigned int valueTest;
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_gptimerModuleConfig :Enter\n");
-#endif
-    if (NULL == gptimerConfig) {
-        printf ("Module cconfiguration parameted passed is NULL\n");
-        return PERF_UTILS_FAILURE;
-    }
-    gptimerModConf = &(memoryMap[PERF_UTIL_GPTIMER_INDEX]);
-    gptimerModConf->src = GPTIMER10_MODULE_BASE_ADDR;
-    gptimerModConf->size = GPTIMER_MODULE_REGSET_SIZE;
-
-    gptimerModConf->dst = OsalDrv_ioMap(gptimerModConf->src, gptimerModConf->size);
-    if (gptimerModConf->dst == NULL) {
-        printf ("PerfUtils_gptimerModuleConfig:Memory_map\
-                                   failed status [%x]\n", status);
-        return status;
-    }
-
-    addrGptimerBaseReg = (unsigned int*)gptimerModConf->dst;
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_gptimerModuleConfig:addrGptimerBaseReg [%x]\n",
-                                                       (unsigned int)addrGptimerBaseReg);
-#endif
-    addrGptimerCtrlReg = REG(GPTIMER, 10, CTRL, addrGptimerBaseReg);
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_gptimerModuleConfig:addrGptimerCtrlReg [%x]\n",
-                                                       (unsigned int)addrGptimerCtrlReg);
-#endif
-    addrGptimerReadReg = REG(GPTIMER, 10, CRR, addrGptimerBaseReg);
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_gptimerModuleConfig:addrGptimerReadReg [%x]\n",
-                                                       (unsigned int)addrGptimerReadReg);
-#endif
-    addrGptimerLoadReg = REG(GPTIMER, 10, LDR, addrGptimerBaseReg);
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_gptimerModuleConfig:addrGptimerLoadReg [%x]\n",
-                                                       (unsigned int)addrGptimerLoadReg);
-#endif
-
-    /*  Setting to Autoreload mode
-        0x0: One shot timer
-        0x1: Autoreload timer
-    */
-    if (gptimerConfig->enableautoReload) {
-        PerfUtils_setRegValue (addrGptimerCtrlReg,
-                                GPTIMER_CTRLREG_AR_BIT_POS, 1, 1);
-    }
-
-    /*The timer counter is prescaled with the value 2(PTV+1).
-    Example: PTV = 3, counter increases value (if started)
-    after 16 functional clock periods.
-    */
-    if (gptimerConfig->enablePrescale) {
-        PerfUtils_setRegValue (addrGptimerCtrlReg,GPTIMER_CTRLREG_PTV_BIT_POS,
-                                                gptimerConfig->valuePrescalar, 1);
-        valuePrescalar = (0x1 << 2);
-
-    /* Enabling prescalar
-    0x0: The TIMER clock input pin clocks the counter.
-    0x1: The divided input pin clocks the counter.
-    */
-        PerfUtils_setRegValue (addrGptimerCtrlReg,
-                                GPTIMER_CTRLREG_PRE_BIT_POS, 1, 0);
-    }
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_gptimerModuleConfig:*addrGptimerCtrlReg [%x]\n",
-                                                       *addrGptimerCtrlReg);
-#endif
-    /*Initializing Timer Counter value to 0 */
-    *addrGptimerReadReg = 0x00000000;
-    /*Initializing Loader Register value to 0 */
-    *addrGptimerLoadReg = 0x00000000;
-
-    timeStampUserSpace = addrGptimerReadReg;
-    valueTest = *(timeStampUserSpace);
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_gptimerModuleConfig :Leave\n");
-#endif
-    return status;
-}
-/*
- *========= PerfUtils_startGpTimer======
- *          To start the gptimer
- */
-void PerfUtils_startGpTimer (int gpTimerNo)
-{
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_startGpTimer :Enter GPTIMER[%x]\n", gpTimerNo);
-#endif
-#ifdef USE_GPTIMER
-    PerfUtils_setRegValue (addrGptimerCtrlReg,
-                            GPTIMER_CTRLREG_ST_BIT_POS, 1, 1);
-#endif
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_startGpTimer :Leave GPTIMER[%x]\n", gpTimerNo);
-#endif
-}
-/*======= PerfUtils_stopGpTimer=========
- *        To  Stop the gptimer
- */
-
-void PerfUtils_stopGpTimer (int gpTimerNo)
-{
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_stopGpTimer :Enter GPTIMER[%x]\n", gpTimerNo);
-#endif
-#ifdef USE_GPTIMER
-    PerfUtils_setRegValue (addrGptimerCtrlReg,
-                            GPTIMER_CTRLREG_ST_BIT_POS, 1, 0);
-
-    /* Resetting Read Register Value  */
-    *addrGptimerReadReg = 0x00000000;
-#endif
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_stopGpTimer :Leave GPTIMER[%x]\n", gpTimerNo);
-#endif
-}
-/*
- *============PerfUtils_selectClkSrc================
- * Selecting the clock src  b/w 32Khz and system clock
- */
-static
-int PerfUtils_selectClkSrc (int clkSrc)
-{
-    int status = PERF_UTILS_SUCCESS;
-    unsigned int readvalue;
-    Memory_MapInfo *clkMgmntL4Gptimer =
-                &(memoryMap[PERF_UTILS_CML4_INDEX]);
-
-    clkMgmntL4Gptimer->src = (CM_L4PER_GPTIMER_BASE_ADDR);
-    clkMgmntL4Gptimer->size = (CM_L4PER_GPTIMER_REGSET_SIZE);
-
-    clkMgmntL4Gptimer->dst = OsalDrv_ioMap(clkMgmntL4Gptimer->src, clkMgmntL4Gptimer->size);
-    if (clkMgmntL4Gptimer->dst == NULL) {
-        printf ("PerfUtils_selectClkSrc:Memory_map failed status[%x]\n", status);
-        return status;
-    }
-
-  addrCmL4GptimerBaseReg = (unsigned int*) (clkMgmntL4Gptimer->dst);
-  addrCmL4PGptimerCtrlReg = REG(CM_L4PER_GPTIMER, 10, CLKCTRL,
-                                             addrCmL4GptimerBaseReg);
-  readvalue  = *addrCmL4PGptimerCtrlReg;
-  while (!(readvalue & 0x02)) {
-        PerfUtils_setRegValue (addrCmL4PGptimerCtrlReg, 0, 2, 2);
-        readvalue = *addrCmL4PGptimerCtrlReg;
-    }
-
-  OsalDrv_ioUnmap(clkMgmntL4Gptimer->dst, clkMgmntL4Gptimer->size);
-    return status;
-}
-
-/*
- * ========= PerfUtils_init ========
- */
-int PerfUtils_init()
-{
-    int status;
-    unsigned int sysClkFreq;
-    Perf_GptimerConfig gpTimerConfig;
-
-    PerfUtils_selectClkSrc (10);
-#ifdef USE_GPTIMER
-    sysClkFreq = PerfUtils_calcSysClkFreq();
-    if (0 == sysClkFreq) {
-        printf("PerfUtils_init : SYSCLK not initialized in kernel\n"
-                     "can't  use  sys clk timer for profiling\n");
-        status = PERF_UTILS_INIT_FAILED;
-        return status;
-    }
-
-    sysClockFreq = sysClkFreq;
-    gpTimerConfig.enableautoReload = 1;
-    gpTimerConfig.enablePrescale = 0;
-    gpTimerConfig.valuePrescalar = 0;
-    gpTimerConfig.gpTimer =10;
-    status = PerfUtils_gptimerModuleConfig (&gpTimerConfig);
-    if (0 > status) {
-        printf ("PerfUtils_init:PerfUtils_gptimerModuleConfig"
-                                                "failed status[%x]\n", status);
-        return status;
-    }
-#endif
-
-    perfRecordsUserSpace = perfRecordsArr;
-
-    memset(perfRecordsUserSpace, 0, sizeof(perfRecordsUserSpace)
-        * MAX_NUM_USERSPACE_RECORDS);
-
-	return status;
-}
-
-/*
- * ========PerfUtils_destroy========
- * To destroy the gptimer module
- */
-int PerfUtils_destroy (void)
-{
-    int status = 0;
-
-    OsalDrv_ioUnmap((unsigned int)addrGptimerBaseReg, GPTIMER_MODULE_REGSET_SIZE);
-
-    return status;
-}
-
-
-/*
- * ======== PerfUtils_addFxn ========
- * To add functions for profiling
- */
-void PerfUtils_addFxn(unsigned int fxnIndex, char * fxnName, unsigned int clientproc, unsigned int serverproc, unsigned int msgsize)
-{
-#ifdef USE_GPTIMER
-    Perf_FunctionRecord *record = &(perfRecordsUserSpace[fxnIndex]);
-#else
-    Perf_LocalRecord    *record = &(perfRecordsUserSpace[fxnIndex]);
-#endif
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf("PerfUtils_addFxn: Enter\n");
-    printf("PerfUtils_addFxn: Adding function %s\n",fxnName);
-#endif
-
-    strcpy(record->fxnName, fxnName);
-    record->client_proc = clientproc;
-    record->server_proc = serverproc;
-    record->msg_size = msgsize;
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf("PerfUtils_addFxn: Leave\n");
-#endif
-}
-
-/*
- * ============= PerfUtils_enter ============
- * Record enter timing for the registered function
- */
-int PerfUtils_enter(unsigned int fxnIndex)
-{
-    int status = 0;
-    int noEntry = 0;
-#ifdef USE_GPTIMER
-    Perf_FunctionRecord *record = (perfRecordsUserSpace + fxnIndex);
-#else
-    Perf_LocalRecord *record = (perfRecordsUserSpace + fxnIndex);
-#endif
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf ("PerfUtils_enter: Enter\n");
-#endif
-    noEntry = record->numEntries;
-
-
-    if(noEntry < MAX_ENTRIES_PER_FUNCTION) {
-#ifdef USE_GPTIMER
-        record->enterTimes[record->numEntries] = *(timeStampUserSpace);
-#else
-        status = gettimeofday(&(record->enterTimes[noEntry]),NULL);
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-        printf("enter Timestamp sec [%d] usec [%d] \n",record->enterTimes[noEntry].tv_sec,
-                                                            record->enterTimes[noEntry].tv_usec);
-#endif
-        if (0 != status) {
-            printf("PerfUtils_enter:error in getimeofday\n");
-        }
-#endif
-    }
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-   printf("PerfUtils_enter: Leave\n");
-#endif
-    return status;
-}
-
-/*
- * ============= PerfUtils_exit ===============
- * Record the exit timing for the registered function
- */
-int PerfUtils_exit(unsigned int fxnIndex)
-{
-    int status = 0;
-    int noEntry = 0;
-#ifdef USE_GPTIMER
-    unsigned int exitTime = *(timeStampUserSpace);
-    Perf_FunctionRecord *record = (perfRecordsUserSpace + fxnIndex);
-#else
-    Perf_LocalRecord *record = (perfRecordsUserSpace + fxnIndex);
-#endif
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf("PerfUtils_exit: Enter\n");
-#endif
-
-    noEntry = record->numEntries;
-    if(noEntry < MAX_ENTRIES_PER_FUNCTION) {
-
-#ifdef USE_GPTIMER
-        record->exitTimes[record->numEntries] = exitTime;
-#else
-        status = gettimeofday(&(record->exitTimes[noEntry]),NULL);
-#endif
-
-#if defined(PERF_UTILS_DEBUG_SUPPORT) && !defined(USE_GPTIMER)
-        printf("exit Timestamp sec [%d] usec [%d] \n",record->exitTimes[noEntry].tv_sec,
-                                                            record->exitTimes[noEntry].tv_usec);
-#endif
-        if (0 != status) {
-            printf("PerfUtils_enter:error in getimeofday\n");
-        }
-
-        record->numEntries++;
-    }
-
-#ifdef PERF_UTILS_DEBUG_SUPPORT
-    printf("PerfUtils_exit: Leave\n");
-#endif
-
-    return status;
-}
-
-static
-void PerfUtils_printUserSpaceReport (void)
-{
-    unsigned int i, j;
-    unsigned int sysClkFreq;
-    unsigned int enterTime, exitTime;
-    unsigned int totalTimeuSec, diff;
-#if 0
-    FILE *fp;
-#endif
-#ifdef USE_GPTIMER
-    Perf_FunctionRecord *record;
-    sysClkFreq = sysClockFreq;
-    sysClkFreq = sysClkFreq/100000;
-#else
-    Perf_LocalRecord *record;
-#endif
-#if 0
-	fp  = fopen("Report.txt","w+");
-
-    if (NULL == fp){
-        printf("Opening file filed\n");
-        exit(0);
-     }
-#endif
-    printf("============UserSpace report============\n");
-
-    for(j = 0; j < MAX_NUM_USERSPACE_RECORDS; j++) {
-        record = (perfRecordsUserSpace + j);
-        for(i = 0; i < record->numEntries; i++) {
-            if (0 == i) {
-                printf("%s\n",record->fxnName);
-                printf("clientproc %u\n",record->client_proc);
-                printf("serverproc %u\n",record->server_proc);
-                printf("msgsize %u\n",record->msg_size);
-                printf("count  %u\n",record->numEntries);
-                totalTimeuSec = 0;
-            }
-#ifdef USE_GPTIMER
-            enterTime = record->enterTimes[i];
-            exitTime =  record->exitTimes[i];
-#else
-            enterTime = ((record->enterTimes[i].tv_sec * 1000000) + record->enterTimes[i].tv_usec);
-            exitTime = ((record->exitTimes[i].tv_sec * 1000000) + record->exitTimes[i].tv_usec);
-#endif
-            diff = (exitTime - enterTime);
-#ifdef USE_GPTIMER
-            /* Converting to usecs */
-            totalTimeuSec += (diff * 10 / sysClkFreq);
-            printf ("> %s took %u us or period %u\n", record->fxnName, diff * 10 / sysClkFreq, diff);
-#else
-            printf("record->enterTimes[i].tv_sec [%d] record->exitTimes[i].tv_sec [%d]\n",
-                        record->enterTimes[i].tv_sec,record->exitTimes[i].tv_sec);
-            printf("record->enterTimes[i].tv_usec [%d] record->exitTimes[i].tv_usec [%d]\n",
-                        record->enterTimes[i].tv_usec,record->exitTimes[i].tv_usec);
-            printf ("> %s took %u us\n", record->fxnName, diff);
-#endif
-
-        }
-        if (record->numEntries > 0) {
-            printf("========================================\n");
-            printf("AVG time: %u us\n", totalTimeuSec / record->numEntries);
-            printf("========================================\n");
-        }
-    }
-//    fclose(fp);
-    printf("===========End of UserSpace report======\n");
-}
-
-
-/*
- * ======== PerfUtils_printReport ========
- *          Print report to user
- */
-
-void PerfUtils_printReport (int printLevel)
-{
-    if (printLevel == 1) {
-        PerfUtils_printUserSpaceReport ();
-    }
-}
-
diff --git a/qnx/src/ipc3x_dev/perfutils/PerfUtils.h b/qnx/src/ipc3x_dev/perfutils/PerfUtils.h
deleted file mode 100644
index b31dee4..0000000
--- a/qnx/src/ipc3x_dev/perfutils/PerfUtils.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/**
- *  @file   PerfUtils.h
- *
- *  @brief      Performance functions
- *
- *              This will have the definitions for the performance measurement
- *              functions.
- *
- *  ============================================================================
- *
- *  Copyright (c) 2009-2012, Texas Instruments Incorporated
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *  *  Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *  *  Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in the
- *     documentation and/or other materials provided with the distribution.
- *
- *  *  Neither the name of Texas Instruments Incorporated nor the names of
- *     its contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- *  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- *  PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- *  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- *  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- *  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- *  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- *  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- *  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *  Contact information for paper mail:
- *  Texas Instruments
- *  Post Office Box 655303
- *  Dallas, Texas 75265
- *  Contact information:
- *  http://www-k.ext.ti.com/sc/technical-support/product-information-centers.htm?
- *  DCMP=TIHomeTracking&HQS=Other+OT+home_d_contact
- *  ============================================================================
- *
- */
-
-
-#ifndef PERFUTILS_H
-#define PERFUTILS_H
-
-/* Linux specific header files */
-#include <sys/time.h>
-
-/* Standard headers */
-#include <stdio.h>
-
-
-#if defined (__cplusplus)
-extern "C" {
-#endif
-
-
-#define SYSM3_PROC 2
-#define APPM3_PROC 3
-
-
-/* USING MEM_IPC_HEAP2 make sure that,not using the
- * this address
- */
-
-#define PERF_UTILS_GPTIMER_TEN         (10)
-#define TOTAL_PERF_BUFFER_SIZE         (SYSM3_PERF_BUFFER_SIZE \
-                                            + APPM3_PERF_BUFFER_SIZE)
-
-// Must match struct definition on Ducati side
-#define MAX_ENTRIES_PER_FUNCTION    200
-#define MAX_ENTRIES_PER_KERNEL_FUNC 64
-#define MAX_NUM_RECORDS             64
-#define GPTIMER10 10
-
-
-/* =============================================================================
- *  APIs
- * =============================================================================
- */
-int PerfUtils_init(void);
-int PerfUtils_destroy (void);
-void PerfUtils_addFxn(unsigned int fxnIndex, char * fxnName, unsigned int clientproc, unsigned int serverproc, unsigned int msgsize);
-int PerfUtils_enter (unsigned int fxnIndex);
-int PerfUtils_exit (unsigned int fxnIndex);
-void PerfUtils_printReport (int printLevel);
-void PerfUtils_startGpTimer (int gpTimerNo);
-void PerfUtils_stopGpTimer (int gpTimerNo);
-#if defined (__cplusplus)
-}
-#endif /* defined (__cplusplus) */
-
-#endif /* ifndef PERFUTILS_H */
diff --git a/qnx/src/ipc3x_dev/perfutils/arm/Makefile b/qnx/src/ipc3x_dev/perfutils/arm/Makefile
deleted file mode 100644
index 84cd0b9..0000000
--- a/qnx/src/ipc3x_dev/perfutils/arm/Makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-#   Copyright (c) 2013, Texas Instruments Incorporated
-#
-#   Redistribution and use in source and binary forms, with or without
-#   modification, are permitted provided that the following conditions
-#   are met:
-#
-#   *  Redistributions of source code must retain the above copyright
-#      notice, this list of conditions and the following disclaimer.
-#
-#   *  Redistributions in binary form must reproduce the above copyright
-#      notice, this list of conditions and the following disclaimer in the
-#      documentation and/or other materials provided with the distribution.
-#
-#   *  Neither the name of Texas Instruments Incorporated nor the names of
-#      its contributors may be used to endorse or promote products derived
-#      from this software without specific prior written permission.
-#
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-#   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-#   THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#   PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-#   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#   OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#   OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-#   EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-LIST=VARIANT
-ifndef QRECURSE
-QRECURSE=recurse.mk
-ifdef QCONFIG
-QRDIR=$(dir $(QCONFIG))
-endif
-endif
-include $(QRDIR)$(QRECURSE)
diff --git a/qnx/src/ipc3x_dev/perfutils/arm/so.le.v7/Makefile b/qnx/src/ipc3x_dev/perfutils/arm/so.le.v7/Makefile
deleted file mode 100644
index 98debad..0000000
--- a/qnx/src/ipc3x_dev/perfutils/arm/so.le.v7/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-#   Copyright (c) 2013, Texas Instruments Incorporated
-#
-#   Redistribution and use in source and binary forms, with or without
-#   modification, are permitted provided that the following conditions
-#   are met:
-#
-#   *  Redistributions of source code must retain the above copyright
-#      notice, this list of conditions and the following disclaimer.
-#
-#   *  Redistributions in binary form must reproduce the above copyright
-#      notice, this list of conditions and the following disclaimer in the
-#      documentation and/or other materials provided with the distribution.
-#
-#   *  Neither the name of Texas Instruments Incorporated nor the names of
-#      its contributors may be used to endorse or promote products derived
-#      from this software without specific prior written permission.
-#
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-#   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-#   THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#   PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-#   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#   OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#   OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-#   EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-include ../../common.mk
diff --git a/qnx/src/ipc3x_dev/perfutils/common.mk b/qnx/src/ipc3x_dev/perfutils/common.mk
deleted file mode 100644
index 06e6380..0000000
--- a/qnx/src/ipc3x_dev/perfutils/common.mk
+++ /dev/null
@@ -1,67 +0,0 @@
-#
-#   Copyright (c) 2013, Texas Instruments Incorporated
-#
-#   Redistribution and use in source and binary forms, with or without
-#   modification, are permitted provided that the following conditions
-#   are met:
-#
-#   *  Redistributions of source code must retain the above copyright
-#      notice, this list of conditions and the following disclaimer.
-#
-#   *  Redistributions in binary form must reproduce the above copyright
-#      notice, this list of conditions and the following disclaimer in the
-#      documentation and/or other materials provided with the distribution.
-#
-#   *  Neither the name of Texas Instruments Incorporated nor the names of
-#      its contributors may be used to endorse or promote products derived
-#      from this software without specific prior written permission.
-#
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-#   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-#   THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#   PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-#   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#   OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#   OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-#   EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-ifndef QCONFIG
-QCONFIG=qconfig.mk
-endif
-include $(QCONFIG)
-
-define PINFO
-PINFO DESCRIPTION=SysLink IPC PerfUtils Library
-endef
-
-NAME = ipc_perfutils
-INSTALLDIR = usr/lib
-
-ifeq ("$(SYSLINK_PLATFORM)", "")
-CCOPTS += -DSYSLINK_PLATFORM_OMAP4430
-endif # ifeq ("$(SYSLINK_PLATFORM)", "")
-
-ifeq ("$(SYSLINK_PLATFORM)", "omap4430")
-CCOPTS += -DSYSLINK_PLATFORM_OMAP4430
-endif # ifeq ("$(SYSLINK_PLATFORM)", "omap4430")
-
-ifeq ("$(SYSLINK_PLATFORM)", "omap5430")
-CCOPTS += -DSYSLINK_PLATFORM_OMAP5430
-endif # ifeq ("$(SYSLINK_PLATFORM)", "omap5430")
-
-ifeq ("$(SYSLINK_PLATFORM)", "vayu")
-CCOPTS += -DSYSLINK_PLATFORM_OMAP5430
-endif # ifeq ("$(SYSLINK_PLATFORM)", "omap5430")
-
-include $(MKFILES_ROOT)/qtargets.mk
-
-CCOPTS += -DUSE_GPTIMER
-#CCOPTS += -g -O0
-CCFLAGS += $(COMPILE_FLAGS)
-CCFLAGS += -fPIC
-
-
diff --git a/qnx/src/ipc3x_dev/ti/syslink/samples/hlos/deh/usr/tests_omx_errors.c b/qnx/src/ipc3x_dev/ti/syslink/samples/hlos/deh/usr/tests_omx_errors.c
index 5adace2..4a40c70 100644
--- a/qnx/src/ipc3x_dev/ti/syslink/samples/hlos/deh/usr/tests_omx_errors.c
+++ b/qnx/src/ipc3x_dev/ti/syslink/samples/hlos/deh/usr/tests_omx_errors.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011, Texas Instruments Incorporated
+ * Copyright (c) 2011-2013, Texas Instruments Incorporated
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -77,7 +77,6 @@
 
 #include "omx_packet.h"
 
-#include "PerfUtils.h"
 #include <stdbool.h>