Age | Commit message (Collapse) | Author |
|
Set fan level to alarm at legacy thermal 2
Bug: 253546977
Signed-off-by: Jenny Ho <hsiufangho@google.com>
Change-Id: I897a1673441d894b0bee56e2d24f505a0a0ab8d6
|
|
Because the method of version control has changed, the version setting
for brightness cap is wrong. According to new version control method to
redefine the version for brightness cap for EVT1.0_2 and before.
Bug: 239140157
Test: adb shell vndservice call Exynos.HWCService 1002 i32 0 f 1.0
Then check kernel debug log for the brightness value
Change-Id: I4a06957265956c994c70256c9846072f6be58721
Signed-off-by: Amy Hsu <amyhsu@google.com>
|
|
Force the device in BPP / GPP mode to improve disconnection issues in EPP mode
Bug: 253138524
Signed-off-by: Ted Lin <tedlin@google.com>
Change-Id: I5e5527a09f7ccc998c7c5f823c88fd2ecaca9b73
|
|
This reverts commit afbf84741c9ee06266a94623066143747d3fa775.
Reason for revert: TRIM_UNUSED_MODULES has been enabled therefore no need
to block these files anymore.
Bug: 234674568
Signed-off-by: Robin Peng <robinpeng@google.com>
Change-Id: Ica1234b1f4169316e6a85c0131c7e7db70fedab7
|
|
This reverts commit afbf84741c9ee06266a94623066143747d3fa775.
Reason for revert: TRIM_UNUSED_MODULES has been enabled therefore no need
to block these files anymore.
Bug: 234674568
Signed-off-by: Robin Peng <robinpeng@google.com>
Change-Id: Ica1234b1f4169316e6a85c0131c7e7db70fedab7
|
|
Also enable the IOP checking and set the calibration light load value.
Bug: 246218334
Signed-off-by: Ted Lin <tedlin@google.com>
Change-Id: Ic0585545b4ff90e13cadceba87d2180f9502c788
|
|
1. modify get panel function
2. modify lhbm gamma change function
Bug: 249417569
Bug: 250892987
Test: dump log to check panel id and rgb ratio
Change-Id: Ib708eb0e8ac228ae0489f8bddabb137684e52dfa
|
|
Bug: 249727192
Signed-off-by: Jason Chiu <jasoncschiu@google.com>
Change-Id: Id9829f6cee9efd0a24ad28d75af7f710fb8e25e2
|
|
Bug: 246922524
Signed-off-by: Wilson Sung <wilsonsung@google.com>
Change-Id: Iee46b4510547851c16f51fe4ad02d60fb97cbda1
|
|
Bug: 238588135
Test: boot test
Change-Id: I37400a06da8ae01233d65629500be7dbde005184
Signed-off-by: Gil <gilliu@google.com>
|
|
Bug: 243179526
Test: LHBM
Signed-off-by: Midas Chien <midaschieh@google.com>
Change-Id: I6fd4f51ad8ed3c30539e5ddab05174e547d734e4
|
|
for battery soc drain smoothly in low temperature.
Bug: 238057661
Signed-off-by: Jenny Ho <hsiufangho@google.com>
Change-Id: I4071bf722ba2df6878e96154ddc5ac2745d6ff07
|
|
Bug: 246768900
Change-Id: Icf9fdd17a368a61230f9fb656f682aa3b54658b5
Signed-off-by: Jason Chiu <jasoncschiu@google.com>
|
|
Bug: 244410752
Test: Check regmap
0x0006404: 0x02aa190d => (13+51)*47=3.008mV
0x0003808: 0x00000022 => 1.6+(34-16)*0.05=2.5A
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: I9bf0532991f5a7174002ad1a226e02c4084c49e4
|
|
Bug: 243179526
Test: LHBM
Signed-off-by: Midas Chien <midaschieh@google.com>
Change-Id: I980d31fbbbe1b1876b142d7169882d93c5cd3e1b
|
|
update cirrus,boost-cap-microfarad from 30 to 4.
Bug: 242183009
Test: builds
Change-Id: I1cf304cc99f009484a53e8fa1f5362e0935bd84d
Signed-off-by: Robert Lee <lerobert@google.com>
|
|
Adjust L10 OIS/Actuator periodic IO thread priority to 99 (RT)
Bug: 244692950
Test: CTS, GCA
Signed-off-by: horngchuang <horngchuang@google.com>
Change-Id: I17148fcabd8538d25e844956ef3629b5ae87a2fa
|
|
Base on te signal measurement to set te_usec to provide more accurate
timing control for sync mipi command and frame update.
Bug: 244143532
Change-Id: I62fa95b9fb4517db4b976e8a0e0aaab5d6995415
Signed-off-by: Amy Hsu <amyhsu@google.com>
|
|
Bug: 244255240
Test: Build pass
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ic2b3fd9a46a2ad9eceb2d9c3dff5d65e46e59191
|
|
update filtercfg
maxim,filtercfg-default = /bits/ 16 <0xc613>;
maxim,filtercfg-adjust = /bits/ 16 <0xc617>;
Bug: 244371981
Bug: 238057661
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: I74d664da6f72cdabd5a7cdb05d99cc5bfca4ee1f
|
|
Bug: 201610482
Signed-off-by: Super Liu <supercjliu@google.com>
Change-Id: I9af76af7a9245dcfa47b633f95e364af9021a5c0
|
|
Bug: 243500797
Change-Id: Ica7db60a647344aa3c0e74bd5df75da4ae063a27
Signed-off-by: Sam Ou <samou@google.com>
|
|
1) BUILD_AOSP_KERNEL=1
2) BUILD_STAGING_KERNEL=0
Bug: 239510636
Signed-off-by: Robin Peng <robinpeng@google.com>
Change-Id: Ifa1d7bd8177a4c7f6e7cb845e102b8dd9d069ee8
|
|
According to OP code Ver.D, when coming out of HS 90Hz, we should always turn off "0xB9, 0x30" HS 90Hz TE.
Bug: 221994218
Test: 1. Switch FPS to 90.
adb shell service call SurfaceFlinger 1035 i32 1
2. Press power key to enter AOD.
3. Check the value of 0XB9. It should be 30.
adb shell "echo F0 5A 5A > /sys/kernel/debug/dri/0/DSI-1/panel/reg/payload"; adb shell "echo 0xB9 > /d/dri/0/DSI-1/panel/reg/address"; adb shell "echo 1 > /d/dri/0/DSI-1/panel/reg/count"; adb shell cat "/d/dri/0/DSI-1/panel/reg/payload"
Signed-off-by: Amy Hsu <amyhsu@google.com>
Change-Id: I7ad2d8d2b232aa712f1c0eebbb205572f63d3750
|
|
Bug: 233984889
Signed-off-by: John Scheible <johnscheible@google.com>
Change-Id: I81da75c15e70d492b3ae37f7a05dd34cb5b9da2f
|
|
Bug: 239507440
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: Iea000244ad18b8b126e1edf34e880e1c4ceec124
|
|
1) keep common part in PLATFORM file
2) keep non-common part in PROJECT file
Bug: 234674568
Signed-off-by: Robin Peng <robinpeng@google.com>
Change-Id: I4a2d4a7c552d8e8b9c767fc372aa2eb56e760b12
|
|
Bug: 241349317
Signed-off-by: yihsiangpeng <yihsiangpeng@google.com>
Change-Id: Id941396e8ad68baae5c148d4845a662b8e0a3ea8
|
|
Bug: 239507440
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: I9bbf22f1eae9e490f6befcc7272fc2dd31dbac25
|
|
Bug: 233011008
Change-Id: Id58fdcf012175fd26de45b31c878f4d712b3da47
Signed-off-by: Ted Lin <tedlin@google.com>
|
|
Bug: 239821762
Signed-off-by: Jidong Sun <jidong@google.com>
Change-Id: I1d89ba61862f60df3b57ae5d9e35bae05a8a9b17
|
|
LHBM is too bright in high brightness mode(GHBM) in P1.1 and EVT1.0 panel.
The symptom only happened in DBV=FFF. LHBM brightness is good if DBV≦FFE.
So add this workaround for proto, EVT1.0 to resolve it.
Bug: 239140157
Test: adb shell vndservice call Exynos.HWCService 1002 i32 0 f 1.0
Then check kernel debug log for the brightness value
Signed-off-by: Amy Hsu <amyhsu@google.com>
Change-Id: I3edabbc9fbda4c24cc17d2e1e6fbcb7a370c44de
|
|
Bug: 233577145
Signed-off-by: yihsiangpeng <yihsiangpeng@google.com>
Change-Id: I1ca85394f2016ee5a16442df1060ada6766a218f
|
|
Bug: 238969191
Test: Build
Signed-off-by: Edmond Chung <edmondchung@google.com>
Change-Id: I8a0bc832785408d1f5f89f282ba18d6d1c3e8f0d
|
|
also remove the negotiated power(use default setting)
Bug: 236803853
Signed-off-by: yihsiangpeng <yihsiangpeng@google.com>
Change-Id: I5b11ba5b2f13132c950a44d674e4d9da7a876df6
|
|
Bug: 239381635
Test: Check palm/grip cancel works
Change-Id: I266ef703d200d0730b36715ba840057e42666496
Signed-off-by: Wendly Li <wendlyli@google.com>
|
|
Module related changes will be reviewed by pixel kernel module
approvers in OWNERS_kernel_modules, see
go/pixelkernel-owners-approval-of-kernel-modules for details.
Bug: 234674568
Signed-off-by: Robin Peng <robinpeng@google.com>
Change-Id: I209daae0d57cf91447d0675eb36a1c7fa51028f1
|
|
Bug: 214118815
Test: Check the size of major/minor is correct
Change-Id: I7d06e017529f4c880d0049e3b367d326bb8217f5
Signed-off-by: Wendly Li <wendlyli@google.com>
|
|
Bug: 214118944
Test: LHBM is off right after LPTW finger leaves.
Change-Id: I0d3bddd3d781a042458c740a0a5ecb14e6a269ed
Signed-off-by: Wendly Li <wendlyli@google.com>
|
|
Bug: 238398889
Signed-off-by: Kyle Tso <kyletso@google.com>
Change-Id: I95570c37b6eae70192f7a1216024bdda95c57b45
|
|
Bug: 239640905
Signed-off-by: Jenny Ho <hsiufangho@google.com>
Change-Id: I09489b0e8e07758941422ebe1a624efd0e0744e2
|
|
Bug: 231537920
Test: adb shell cat /sys/devices/platform/1c2c0000.drmdsim/hs_clock
Change-Id: I5a8fbb4cd499f37f243dbd4bf89fae113618e704
Signed-off-by: gilliu <gilliu@google.com>
|
|
Bug: 238907889
Test: Be able to report orientation to offload
Change-Id: I2f50d8cb1a86266cf9a1894ef73ac7882a0854ac
Signed-off-by: Wendly Li <wendlyli@google.com>
|
|
Bug: 238711150
Signed-off-by: Jenny Ho <hsiufangho@google.com>
Change-Id: I332ebc6e3d9f017958c4ffa77c517140dafb6ffa
|
|
Bug: 239365327
Signed-off-by: Jason Chiu <jasoncschiu@google.com>
Change-Id: I1ac1dede1de009805bf5ad81717283d7bc30943d
|
|
Bug: 238588834
Signed-off-by: Jason Chiu <jasoncschiu@google.com>
Change-Id: Idc1abe508365e4f25971e7a1c623102790cf03e4
|
|
Bug: 238907889
Test: Be able to report orientation to offload
Change-Id: I52ea8cc062cc42ec56476e905f3dddce636be3e5
Signed-off-by: Wendly Li <wendlyli@google.com>
|
|
Build and distribute device tree binary gs201-b0_v2-ipop.dtb for gs201
B0 IPOP package silicon revision.
Bug: 223404702
Bug: 238970277
Signed-off-by: Jason Chiu <jasoncschiu@google.com>
Change-Id: I9caab3bd4db02d2eaa475a0c21b4305571c56a9d
|
|
Bug: 221994218
Test: Switch FPS and check the FPS value is correct.
1. Enable "show refresh rate" in Developer options.
2. Switch FPS by following commands.
[90] $adb shell service call SurfaceFlinger 1035 i32 1
[60] $adb shell service call SurfaceFlinger 1035 i32 0
Change-Id: I5a00668e6ebaa3f9dcb38c7e9454ced4baa6cb0a
|
|
Bug: 222021712
Bug: 237488016
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: I35d01458a9ce45f211eb0acf16e0d65e71e4a3b5
|