#include <dt-bindings/gpio/gpio.h>

&decon_f {
	depends-on = <&dsim_0>;
	pinctrl-names = "hw_te_on", "hw_te_off", "default";
	decon,ttw-gpio = <&gpa0 6 0>;
	pinctrl-0 = <&ttw_irq &decon_f_te_on>;
};

&dsim_0 {
	depends-on = <&panel_0>;
	pinctrl-names = "default";
	pinctrl-0 = <&disp_power &disp_reset &mux_sel &mux_oe>;
};

&panel_0 {
	/* reset, power */
	gpios = <&gpc1 1 GPIO_ACTIVE_LOW>, <&gpm14 0 GPIO_ACTIVE_HIGH>;
	mux-gpios = <&gpm10 0 GPIO_ACTIVE_HIGH>, <&gpm11 0 GPIO_ACTIVE_LOW>;
	3p3v-supply = <&ldo20_reg>;
	1p8v-supply = <&ldo21_reg>;

	wf012fbm: wf012fbm {
		id = <0x1>;
		/* 0: video mode, 1: DP command mode, 2: MIPI command mode */
		mode = <2>;
		resolution = <384 384>;
		size = <30 30>;
		timing,refresh = <60>;
		timing,dsi-hs-clk = <386>;
		timing,pmsk = <0x2 0xEE 0x3 0x89D9>;

		timing,h-porch = <8 40 384>; /* dsim H porch : hbp, hfp, hsa */
		timing,v-porch = <8 22 384>; /* dsim V porch : VBP, VFP, VSA */

		timing,dsi-escape-clk = <12>;
		data_lane = <1>;
		type_of_ddi = <2>;

		/* Rest of parameters copied from exynos9110-display-lcd.dtsi */
		mic_en = <0>; /* 0: Disable, 1: Enable */
		mic_ratio = <2>; /* 0: 1/2 mic, 1: 1/3 mic */
		mic_ver = <2>; /* 0: mic v1.1, 1: v1.2, 2: v2.0 */
		dsc_en = <0>; /* 0: Disable, 1: Enable */
		dsc_cnt = <2>; /* used DSC count */
		dsc_slice_num = <2>; /* count of dsc slice */
		dsc_slice_h = <40>; /* height of dsc slice */
		cmd_underrun_lp_ref = <1625>; /* for underrun detect*/
		mres_en = <0>;
		mres_number = <1>;
		mres_width = <720>;
		mres_height = <1280>;
		mres_dsc_width = <360>;
		mres_dsc_height = <74>;
		mres_dsc_en = <0>;
		hdr_num = <0>;			/* not support */
		hdr_type = <0 0 0 0>;	/* not support */
		hdr_max_luma = <0>;		/* not support */
		hdr_max_avg_luma = <0>;	/* not support */
		hdr_min_luma = <0>;		/* not support */
	};

};

&pinctrl_0 {
	ttw_irq: ttw-irq {
		samsung,pins = "gpa0-6";
		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
	};
};

&pinctrl_2 {
	disp_power: disp-power {
		samsung,pins = "gpm14-0";
		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
	};
	mux_sel: mux-sel {
		samsung,pins = "gpm10-0";
		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
	};
	mux_oe: mux-oe {
		samsung,pins = "gpm11-0";
		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
	};
};

&pinctrl_5 {
	disp_reset: disp-reset {
		samsung,pins = "gpc1-1";
		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
	};
};