Age | Commit message (Collapse) | Author |
|
Branch: v5.10-cs40l26
Tag: cs40l26-v5.2.1_5.10
Files:
drivers/input/misc/cs40l26-i2c.c (No changes)
drivers/input/misc/cs40l26-spi.c (No changes)
drivers/input/misc/cs40l26-sysfs.c
drivers/input/misc/cs40l26-tables.c (No changes)
drivers/input/misc/cs40l26.c
include/linux/mfd/cs40l26.h
sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
Features:
- Add vpbr_thld sysfs control
- Add svc_le_est sysfs control in calibration directory
Bug fixes:
- Fix issue where invert and SVC were not applied to streaming data on first
playback
- Fix vibe_state issue when stopping an SVC effect immediately after
triggering
- Work around PSEQ_WRITE_REG full sign extention bug
- Fix bug in SVC and invert kcontrols where driver attempts to access control
before ensuring device is awake
Major API changes:
- None
Commits:
217a3c0 ASoC: cs40l26: Use pm_runtime for kcontrols
b6e471f ASoC: cs40l26: Report return value upon PM Runtime Resume Failure
112d30b input: cs40l26: Report return value upon PM Runtime Resume Failure
0b5f633 ASoC: cs40l26: PM Resume error handle for CODEC
40792b3 input: cs40l26: Improvements to SVC Le Estimation
fc06825 input: cs40l26: Support for maintenance firmware branch
3952b3b input: cs40l26: Address PSEQ WRITE_FULL issue
aaaf562 input: cs40l26: Add sysfs control for vpbr_thld
caa3f56 input: cs40l26: Move stop delay outside mutex
(Skip) 63b3998 Documentation: cs40l26: Fix timeout maximum values
2075e2f ASoC: cs40l26: Move PMU-time register writes to mixer controls
(Skip) e376a83 Documentation: cs40l26: Fix "cirrus,redc-default" calculation
0bb9162 ASoC: cs40l26: Use set_pll_loop() during RECLK config
4b341ed input: cs40l26: Avoid DSP lock during driver probe
Bug: 231410838
Test: Copy texts and adjust alarm
Test: NFC, dumpstate, keyboard vibration
Test: idlcli commands
Test: Switch firmware continuous
Test: Switch firmware and check the first tick effect
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: Ide206f8ea173e79267fa4506dece31f6e26a9356
|
|
Branch: v5.10-cs40l26
Tag: cs40l26-v5.0.0_5.10
Files:
drivers/input/misc/cs40l26-i2c.c
drivers/input/misc/cs40l26-spi.c
drivers/input/misc/cs40l26-sysfs.c
drivers/input/misc/cs40l26-tables.c
drivers/input/misc/cs40l26.c
include/linux/mfd/cs40l26.h
sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
- Skip cs40l26_set_tdm_slot() since removed.
Features:
- Support for 1.2V variant CS40L27
- Support for SVC calibration period in ASP waveforms
Bug fixes:
- Resolve race condition between IRQ clear write
and DSP to host mailbox messages.
- Avoid I2C timeouts by preventing hibernation
directly after the DSP starts at probe then allowing
hibernation once initialization is complete.
Major API changes:
- The sysfs control "fw_mode" which resided in "default"
has been removed. The driver does not support a
full-featured ROM mode so this control served no purpose.
- The sysfs control "calib_fw_load" has moved from the
"calibration" directory to the "default" directory and
has been renamed "swap_firmware". The behavior of the
control is unchanged.
Commits:
733da2 input: cs40l26: Change firmware loading sysfs control
3120e4 input: cs40l26: Remove support for firmware mode
7db090 input: cs40l26: Print error register as hex
f0c156 ASoC: cs40l26: Wait for SVC calibration
9bf4b8 input: cs40l26: Add event for end of SVC calibration
c32679 input: cs40l26: Clear EINT before servicing mailbox
(Skip) 9df7d5 Documentation: cs40l26: Add "cs40l27" compatible name
13710b input: cs40l26: Add support for CS40L27 and rev. B0
756dbc input: cs40l26: Prevent hibernation after DSP start
00e050 ASoC: cs40l26: Remove check of dai->id in set_tdm_slot()
80b821 input: cs40l26: Ensure write to PSEQ is acknowledged
Bug: 228290494
Test: Copy texts and adjust alarm
Test: NFC, dumpstate, keyboard vibration
Test: idlcli commands
Test: Switch firmware continuous
Test: Switch firmware and check the first tick effect
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: I1961844366065acc2951c386f1516877648aaaf9
|
|
Branch: v5.10-cirrus-dsp-fw
Tag: cl-dsp-fw-v3.1.7_5.10
Files:
drivers/firmware/cirrus/cl_dsp.c
include/linux/firmware/cirrus/cl_dsp.h
Bug fixes:
- Replace strlcpy() instances with strscpy()
- Improved error reporting for invalid algo. rev
- Minor typo fix
Commits:
0a2a7f7 firmware: cirrus: Fix typo
332111a firmware: cirrus: Improve error reporting for invalid algo. rev.
ec97039 firmware: cirrus: Use strscpy for string copying
---
Branch: v5.10-cs40l26
Tag: cs40l26-v4.0.2_5.10, cs40l26-v4.0.3_5.10
Files:
drivers/input/misc/cs40l26-i2c.c (No changes)
drivers/input/misc/cs40l26-spi.c (No changes)
drivers/input/misc/cs40l26-sysfs.c
drivers/input/misc/cs40l26-tables.c
drivers/input/misc/cs40l26.c
include/linux/mfd/cs40l26.h
sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
Features:
- Allow swapping firmwares of the same type (runtime/calibration)
- Add support for Dynamic Boost Control via sysfs controls
- Extend range of PM timeouts
Bug fixes:
- Fixes bug in which PSEQ list terminator was not being reset between
firmware swaps.
- Appropriately clear GPI mapping after erasing waveform
Commits:
tag: cs40l26-v4.0.3_5.10
0c520ef input: cs40l26: Reset PSEQ END_OF_SCRIPT on fw swap
956d534 input: cs40l26: Check pseq mem before adding op
tag: cs40l26-v4.0.2_5.10
4a9f5e3 input: cs40l26: Update SVC tuning file name size
882895f input: cs40l26: Loosen restriction on firmware swapping
5c7f770 input: cs40l26: Use strscpy for string copying
0700a83 ASoC: cs40l26: Update Handling of SVC for ASP Streaming
cfeac58 input: cs40l26: Add user controls for Dynamic Boost
6068def input: cs40l26: Update PM Transition Timeout Limits
b65b511 input: cs40l26: Fix value to disable gpi triggers
Bug: 222620491
Test: idlcli commands.
Test: Firmware switching and then trigger haptics
Test: Continuous index 0 haptics
Test: Continuous index 9 hatpcis
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: Ic2eaca8fe2cce9ef0c4b03460ddca791ad57d852
|
|
Branch: v5.10-cs40l26
Tag: CS40L26-v4.0.0_5.10
Files:
drivers/input/misc/cs40l26-i2c.c (No changes)
drivers/input/misc/cs40l26-spi.c (No changes)
drivers/input/misc/cs40l26-sysfs.c
drivers/input/misc/cs40l26-tables.c
drivers/input/misc/cs40l26.c
include/linux/mfd/cs40l26.h
sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
Features:
- Devicetree Property "cirrus,gain-adjust"
- For LRA-specific gain changes
- Controls for f0 and ReDC Compensation
- Sysfs control vmon_max for VMON logging maximum reporting
- Allow multiple writes to one register in power on sequencer
- Devicetree Property "cirrus,bst-expl-mode-disbale"
- If present, will disable boost exploratory mode at the
cost of the ability to reliably detect BST_SHORT_ERR instances
- Imrpoved error handling for PM Runtime Resume errors
Bug fixes:
- Update error handling to avoid deadlock
- Avoid hibernation when intializing power on sequencer
- Updated handling of vibe_state to avoid race condition with firmware
- Code Improvements
Commits:
e4b5d23 ASoC: cs40l26: Ensure recovery from PM Runtime Resume error
2d5cb03 input: cs40l26: Ensure recovery from PM Runtime Resume error
(SKIP) 098d137 Documentation: cs40l26: Add DT boolean "cirrus,bst-expl-mode-disable"
30c30e7 input: cs40l26: Add DT boolean "cirrus,bst-expl-mode-disable"
(SKIP) 0707fb3 Documentation: cs40l26: Add DT boolean "cirrus,vibe-state"
38592da input: cs40l26: Add DT boolean "cirrus,vibe-state"
7e0c02c input: cs40l26: Read IRQ1_STATUS after PM Runtime resume
c903a82 input: cs40l26: Load calibration tuning file
26e93ab input: cs40l26: Print measured LE estimation value
b8ef3b0 input: cs40l26: Disable Boost Exploratory Mode
2d8ef2c input: cs40l26: Allow multiple writes to an address in PSEQ
9f166cd input: cs40l26: Update vibe_state in mailbox handler
53f24ab input: cs40l26: Add vmon_max logging sysfs control
c7708f5 input: cs40l26: Avoid hibernation when initializing PSEQ
337536d input: cs40l26: Add f0 and redc comp controls
(SKIP) 6e1642c Documentation: cs40l26: Add DT property "gain-adjust"
eb1fed7 input: cs40l26: Add DT property "gain-adjust"
bc34f05 input: cs40l26: Move BST_IPK_FLAG unmask to proper function
0570df1 input: cs40l26: Update error handling procedure
Bug: 205688153
Test: idlcli commands.
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: Ic4b7cc5664c32132125178f7a41ca7c1a916123e
|
|
Branch: v5.10-cirrus-dsp-fw
Tag: cl-dsp-fw-v3.1.6_5.10
Files:
drivers/firmware/cirrus/cl_dsp.c
include/linux/firmware/cirrus/cl_dsp.h
Features:
- cl-dsp-fw-v3.1.4_5.10
Add memchunk flush
Bug fixes:
- cl-dsp-fw-v3.1.6_5.10
Fix syntax error caught by checkpatch.pl
- cl_dsp-v3.1.5_5.10
Fix bug that allowed for a potential NULL pointer dereference
- cl-dsp-fw-v3.1.4_5.10
Add empty check for get dsp register.
Commits: 9ee092c firmware: cirrus: Fix code syntax error
16af046 firmware: cirrus: Avoid potential NULL dereference
f916a30 firmware: cirrus: Add cl_dsp_memchunk_flush()
4cf0400 firmware: cirrus: Add empty check in dsp_get_reg
30034b6 firmware: cirrus: arm64 compiler fix
Change-Id: I2efbf1611bad281b67fc035b31b30925e869082b
---
Branch: v5.10-cs40l26
Tag: cs40l26-v3.4.0_5.10
Files:
drivers/input/misc/cs40l26-i2c.c (No changes)
drivers/input/misc/cs40l26-spi.c (No changes)
drivers/input/misc/cs40l26-sysfs.c
drivers/input/misc/cs40l26-tables.c (No changes)
drivers/input/misc/cs40l26.c
include/linux/mfd/cs40l26.h
sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
Features:
- cs40l26-v3.4.0_5.10
Improved information from DSP to host mailbox transactions
Additional debug logging
- cs40l26-v3.3.0_5.10
Expose LRADELAYSAMPS to user
Support for DVL tuning
Contingency for DSP start failure on boot
- cs40l26-v3.1.2_5.10
Add Support for Nested Composite Waveform
Improve BUZZGEN GPI trigger support
Support GPI triggers of OWT waveforms
Fix NUM_OF_WAVES race condition
Improve deferred firmware loading
DT parameter to set idle -> hibernate DSP timeout
Bug fixes:
- cs40l26-v3.4.0_5.10
Updated handling of vibe_state
Explicitly stop haptic playback before starting I2S stream
Prevent asynchrnous I2S start message to mailbox from driver
Improved code clarity
Resolution of clang, cppcheck, sparse, and checkpatch warnings
- cs40l26-v3.3.0_5.10
Prevent asynchrnous erase/upload calls
Prevent asynchronous interrupts from affecting code under mutex lock
Code improvements to write sequencer
Static analysis fixes
Memory leak correction
- cs40l26-v3.1.2_5.10
Check for the DSP to be initialized before uploading a waveform
Do not allow stop command only if the ASP is active.
Commits:
ba22584 input: cs40l26: Resolve Warnings caused by DEVICE_ATTR
b1f116d input: cs40l26: Clarify read size in pseq_init()
3447c80 ASoC: cs40l26: Use new vibe_state handling
a3e37ec input: cs40l26: Update handling of vibe_state
8ec6127 ASoC: cs40l26: remove old vibe_state handling
bc9f10c input: cs40l26: Add debug message in erase_effect
dd88832 input: cs40l26: Support new FW event notifiers
4a963ec input: cs40l26: Add support for FW branch
fead3ba input: cs40l26: Stop playback before starting I2S
0827b6c ASoC: cs40l26: Always unlock mutex in cs40l26_pcm_ev
4753f8c input: cs40l26: Resolve clang warnings
e7f25c9 input: cs40l26: Resolve cppcheck warnings
5fcb292 input: cs40l26: Ensure vibe_state_set() called under mutex lock
75ad45a input: cs40l26: Additional defines and logging
6da8378 ASoC: cs40l26: Use asp_start() to start I2S stream
a14e17b input: cs40l26: Replace asp_workqueue with asp_start function
7191239 ASoC: cs40l26: Remove usage of asp_work
5a32ccf input: cs40l26: Don't remove OWT effect from list if delete fails
c7272dc ASoC: cs40l26: Expose delay controls
dd4491a input: cs40l26: Load DVL tuning file
4b84df2 input: cs40l26: Use devm_ for allocation
7163487 input: cs40l26: Set up parameters before dsp start
31b55dd input: cs40l26: Retry if DSP is not in run state
626f83c input: cs40l26: Set timeout to max on fw re-load
f33edc6 ASoC: cs40l26: Fix potential memory leak
aebbb26 input: cs40l26: Fix static analysis errors
7a5489e input: cs40l26: Adding debug prints
ff55e98 input: cs40l26: Add erase and upload operations to ordered workqueue
9c9da81 input: cs40l26: Mutex protect interrupt handler
332bb17 input: cs40l26: Write sequencer updates
c5be6bb input: cs40l26: No stop command during ASP
7e806e4 input: cs40l26: use type-specific min function
f93a999 input: cs40l26: Check for uninitialised DSP in cs40l26_header
c659dec input: cs40l26: Changing GPI map API
f12a21b input: cs40l26: Add delay before stopping playback
3732052 input: cs40l26: Delay registration of IRQ until firmware is loaded
6de4136 input: cs40l26: Add fw load defer
7d5e01b input: cs40l26: Correct memory space calculation for 4-byte words
e8123a3 input: cs40l26: Add Support for Nested Composite Waveforms
aa472ba input: cs40l26: Read NUM_OF_WAVES before each trigger
98ff3b5 input: cs40l26: Add dt parameter for DSP transition
Bug: 205688153
Test: N/A.
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: I606c7d75891f85995eadf367d4b833b682f8e23d
|
|
Branch: v5.10-cs40l26
Tag: cs40l26-v3.0.3_5.10
Files:
- drivers/input/misc/cs40l26-i2c.c (No changes)
- drivers/input/misc/cs40l26-spi.c (No changes)
- drivers/input/misc/cs40l26-sysfs.c
- drivers/input/misc/cs40l26-tables.c (No changes)
- drivers/input/misc/cs40l26.c
- include/linux/mfd/cs40l26.h
- sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
Fetures:
- Defer Class H Handling to Firmware (rev >= 7.2.10)
- Add bost_disable_delay sysfs control
- Support for indefinite SVC and Wavetable tunings based
on LE value
- Add F0_Offset sysfs control
- Use firmware timer instead of HR Timer to schedule haptics
Bug fixes:
- Avoid infinite vibration race-condition
- Graceful exiting of interrupt handler if wake fails
- Use programmed duration for OWT effects instead of
calculated waveform lentgth
Commits:
48d307c79dfb input: cs40l26: Use firmware timer to schedule haptic effects
93880c7a2a41 input: cs40l26: Recover from wakeup error in interrupt handler
a330f54756ee input: cs40l26: Change timeout control for OWT
a7209b6bce3b input: cs40l26: Add F0 offset sysfs
(Skip) 80e7aa51feaa Documentation: cs40l26: Support for multiple SVC LE ranges
83e57c54b934 input: cs40l26: Support for multiple SVC LE ranges
0bc5f644a3fd input: cs40l26: Use STOP_PLAYBACK mailbox command
a8c2d057d971 input: cs40l26: Add boost_disable_delay control
0f0eb802dd0f input: cs40l26: Remove Class H handling
18877c7a715c ASoC: cs40l26: Remove Class H handling
Bug: 193793095
Test: NFC, bugreport, notification vibration can stop.
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: Iec2a75aa2c94e14c6079b05c2b438afd6c7beca1
(cherry picked from commit aaad7003272facb3e7eb2c768520885390ccb963)
|
|
Branch: v5.10-cs40l26
Tag: cs40l26-v2.0.1_5.10
Files:
drivers/input/misc/cs40l26-i2c.c (No changes)
drivers/input/misc/cs40l26-spi.c (No changes)
drivers/input/misc/cs40l26-sysfs.c
drivers/input/misc/cs40l26-tables.c
drivers/input/misc/cs40l26.c
include/linux/mfd/cs40l26.h
sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
Features:
- I2S VMON Mixer Control
- DSP bypass streaming
- 96 kHz streaming
- Support for multiple OWT waveforms
- sysfs control for number of waveforms
Bug fixes:
- Fix conditional Class H handling for SVC streaming
- sysfs control owt_free_space shows space in byte
commits:
8aa3d7e996ab input: cs40l26: Remove acknowledge debug message
d87c12eb9614 ASoC: cs40l26: Do not enable Class H if SVC is enabled
e99f87cb6afb input: cs40l26: Handle Class H Corner Cases
4ea6bac22a23 input: cs40l26: Add sysfs control to get number of waveforms
32c7894579fb input: cs40l26: Display OWT free space in bytes
5ff5dc33ad15 input: cs40l26: Handle Multiple OWT Waveforms
30fde7eeb877 ASoC: Adding support for 96kHz fs and DSP bypass
eccaf3df6af1 ASoC: cs40l26: Use workqueue to start I2S stream
e9d0a46bfbbb input: cs40l26: Use workqueue to start I2S stream
770ab3b80cab ASoC: cs40l26: Display VMON value
487c966bba02 input: cs40l26: Add SPKMON_VMON_DEC_OUT_DATA as readable register
Branch: v5.10-cirrus-dsp-fw
Tag: cl-dsp-fw-v3.1.3_5.10
Files:
drivers/firmware/cirrus/cl_dsp.c
include/linux/firmware/cirrus/cl_dsp.h
Increase maximum number of waveforms that can be uploaded
via .bin file to 254 from 128.
commits:
d3be11f7f382 firmware: cirrus: Increase maximum number of wavetable entries
Bug: 193782625
Bug: 196485489
Test: Check idlcli vibrator commands.
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: Ifa4828cb32ee342fee31306d288313e5ea7b857a
|
|
Since the latest haptics codec cannot be used in
our current setting, I add the previous function
to suppot our setting.
Bug: 197691879
Test: Use sound picker to trigger audio coupled haptics
Signed-off-by: chasewu <chasewu@google.com>
Change-Id: I5d5477bd6155edff7b42ecf56c8bde38d4f1bd34
|
|
Branch: v5.10-cs40l26
Tag: cs40l26-v1.1.0_5.10
Files:
drivers/input/misc/cs40l26-i2c.c (No changes)
drivers/input/misc/cs40l26-spi.c (No changes)
drivers/input/misc/cs40l26-sysfs.c
drivers/input/misc/cs40l26-tables.c
drivers/input/misc/cs40l26.c
include/linux/mfd/cs40l26.h
sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
Features:
- Increase A2H Volume Granularity
- Add more debug-level statements
- sysfs control to get amount of space left in wavetable
- DT control to set maximum boost peak current
- sysfs control to read die temperature
- sysfs control to swap firmware variants at runtime
- Load firmware synchronously
- Inverted streaming and waveform playback
- SVC enable for effects streamed via ASP
- Map Haptic Effects to GPI events
- Actuator Safe Mode workaround
- Remove support for A0 silicon
Bug fixes:
- Remove unused variables
- Cancel worker threads before deleting workqueue
commits:
c07047bd1087 ASoC: cs40l26: Add control to enable invert streaming data
7d0b08956875 input: cs40l26: Remove A0 silicon support
d6c20f8342fd input: cs40l26: Update firmware swap function
(Skip) 421500c4eb47 Documentation: cs40l26: Add option to load specified SVC tuning
a3fb83ecc3b3 input: cs40l26: Add option to load specified SVC tuning
736aa239110c ASoC: cs40l26: Add control to enable SVC for streaming data
7c060144b291 input: cs40l26: Implement actuator safe mode workaround
9b866d0e0362 input: cs40l26: Map Haptic Effects to GPI Events
e28e0a5131cc input: cs40l26: Add ability to invert waveform playback
961e4ba3a4bb input: cs40l26: Load firmware synchronously
23463ef1ab4a input: cs40l26: Add ability to swap firmware variants
05b2d67e3c66 input: cs40l26: Remove ENABLE/DISABLE macros
b6bd69389b17 input: cs40l26: Remove unneeded use of variable in cs40l26_pcm_ev
27af6399be8c input: cs40l26: Cancel worker threads before destroying workqueue
1794f854a2d0 input: cs40l26: Add control to read die temperature when DSP is active
50bf4051b3a8 input: cs40l26: Remove silicon rev. checks for algorithm IDs
(Skip) 3982e2db9db5 Documentation: cs40l26: Allow user to set peak boost current
756186d689c5 input: cs40l26: Allow user to set peak boost current
ed0f6bc72faa input: cs40l26: Control to read remaining space in wavetable
72510182f0f2 input: cs40l26: Use percentage value to set A0 gain
91d781c96e12 input: cs40l26: Make status registers readable via regmap
a8beb7e4c41f ASoC: cs40l26: Add dev_dbg statments to ALSA callbacks
c5b8320ebbce input: cs40l26: Add debug statements
17b3a65e18d1 input: cs40l26: Control to read Power On Sequence
8c4f68e0194a ASoC: cs40l26: Increase A2H Volume granularity
Branch: v5.10-cirrus-dsp-fw
Tag: cl-dsp-fw-v3.1.2_5.10
Files:
drivers/firmware/cirrus/cl_dsp.c
include/linux/firmware/cirrus/cl_dsp.h
Allocate array memory for .bin file data dynamically instead of using
a hard-coded value to avoid possibility of a kernel crash.
Allow firmware to load even if there are incompatibilities between
the expected firmware version, the loaded firmware, and the tuning
file revisions.
commits:
79a4a41e4fc6 firmware: cirrus: Allocate data array dynamically
19140c2d644b firmware: cirrus: Loosen restrictions on firmware loading
8e02f2e42990 firmware: cirrus: Don't explicitly free coefficient parent name
Bug: 191658078
Bug: 180110149
Bug: 194540033
Bug: 193793095
Test: Check idlcli vibrator commands.
Test: Back EMF for internal calibration.
Test: Firmware swap.
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: I7db82ce23663772a83e69490b88cfb47e4bf93f3
|
|
Commits:
2dbcb12 cs40l26: fix BB for CirrusLogic RC2v1
1a241e1 cs40l26: convert dev_alert to dev_err
ba22cd0 cs40l26: fix BB of "Add Open Wavetable Support"
Bug: 184610991
Test: build pass
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: I129e582b049a5a61599f3e8ec45cb43d72a6ffab
|
|
Branch: v5.10-cs40l26
Tag: cs40l26-RC2_5.10
Files:
drivers/input/misc/cs40l26*.[ch]
sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
include/linux/mfd/cs40l26.h
commits:
3cbb0ce07f52 input: cs40l26: Update Open Wavetable Controls
(Skip) 5165eb5311b7 Documentation: cs40l26: Add cirrus,bst-dcm-en parameter
a305a491026d input: cs40l26: Add dcm-en control to device tree
97bf00f3033f input: cs40l26: Improved gain control method
a0620f60b09e input: cs40l26: Max VBST and Max Back EMF Reproting
21afb84718b8 input: cs40l26: Add support for calibration
557581c4e4ef ASoC: cs40l26: Add support for TDM slot configuration
fbff8ee424c3 ASoC: cs40l26: Add A2H Volume Control
31cce50083e5 input: cs40l26: Use END_PLAYBACK for VIBEGEN effects
a06bc9bd293d input: cs40l26: Use TIMEOUT_MS when duration undefined
07405c86dacb input: cs40l26: Remove unused variable
Bug: 184610991
Test: n/a
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: I75e3349dbcf5e9358158ee9754fd7a085afd133c
|
|
5897d91abf99 input: cs40l26: Improved gain control method
18ded7ea08ca input: cs40l26: Max Back EMF API
756ce5f138dc input: cs40l26: Add support for calibration
458244dc72ca ASoC: cs40l26: Add support for TDM slot configuration
236237999946 ASoC: cs40l26: Add A2H Volume Control
1573f3fe2d5b input: cs40l26: Use END_PLAYBACK for VIBEGEN effects
346cb8cd67ba input: cs40l26: Use TIMEOUT_MS when duration undefined
40d10f025eba input: cs40l26: Remove unused variable
Bug: 184610991
Test: Driver attribute files show up.
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: I7dc25d526fcc0bcbd10619d46b3b382896dc50ac
|
|
Bug: 184610991
Test: Built pass.
Test: Driver probed.
Test: Basic function.
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: I82d0f37a74a73b2e0c23eee186a55c2823b9de34
|
|
Branch: v5.10-cs40l26
Tag: cs40l26-RC1v5_5.10
Files:
drivers/input/misc/cs40l26*.[ch]
sound/soc/codecs/cs40l26.c -> cs40l26-codec.c
include/linux/mfd/cs40l26.h
Commits:
48008bf7e951 input: cs40l26: Allow MFD to number children
a466efc1776a input: cs40l26: Configure some ASP controls in core driver
3dd2be5060ce ASoC: cs40l26: Do not access firmware controls in codec_probe
0d8255c507fc input: cs40l26: Remove function for coeff. file loading
abb4c12fee99 input: cs40l26: Reserve cs40l26_ack_read for polling
a907b2432e82 input: cs40l26: Increment A0 minimum firmware revision to 5.0.4
43ae62e013fd input: cs40l26: Add minimum revision value for A1 firmware
59e7425816a7 input: cs40l26: Verify firmware in core driver
9709db269456 input: cs40l26: Support PWLE waveforms in Open Wavetable
a9dfa6d32ac8 input: cs40l26: Fix misspelled variable name
951630cb6608 ASoC: cs40l26: Reverse logic for using tdm_width
40ae66e93fd1 input: cs40l26: Add Open Wavetable Support
0a674a1ccfea input: cs40l26: Add support for pseq v2
d749863a9703 input: cs40l26: Add errata write to fix indeterminate PLL lock time
32ecacc32a36 input: cs40l26: Add support for A1 chip revision
e4c3a094ecdf input: cs40l26: Convert mailbox queue to use registers in wmfw
1b193fad6fc1 input: cs40l26: Ensure DSP can accept mailbox commands
1675126b9e1a input: cs40l26: Wait to enable pm runtime controls until firmware ready
9dae893f3448 input: cs40l26: Improvements to pm_state_transition
96e1be15046b ASoC: cs40l26: Wake device when probing codec driver.
a9444c9b2c77 input: cs40l26: Change some instances of dsp_read to regmap_read
c4b71016240d ASoC: cs40l26: Switch A2H tunings at runtime
1629fb45fec6 input: cs40l26: Re-enable I2S stream after haptic effect
ffc4e2ccfe95 ASoC: cs40l26: Add ASP vibe state enum
8733e2547135 input: cs40l26: Improve vibe_state tracking
a5b0a135f849 ASoC: cs40l26: Enable Class H tracking during ASP playback
56a8557861dd input: cs40l26: Function to set Class H
8817c80d021f ASoC: cs40l26: Add Option to Disable ASP Playback
98bf94b1df98 input: cs40l26: Changes to PM hibernate/shutdown timeout
1a09000c60d8 input: cs40l26: Remove Firmware ID check after state transition
1b5a5b26e9fe input: cs40l26: Use LAST_WAKESRC_CTL to determine GPIO status
7407cb8ffc91 input: cs40l26: Add set_gain callback
67095dcbc5ca input: cs40l26: Share of_device_id table between SPI/I2C drivers
268c9da5bcfd ASoC: cs40l26: Add set_tdm_slot callback
919ab920876b ASoC: cs40l26: Add TDM Support
77baad927c8d ASoC: cs40l26: Remove redundant stream direction check
830c4e0b5618 ASoC: cs40l26: Don't write DAI format directly from cs40l26_set_dai_fmt
f938eac74f10 ASoC: cs40l26: Remove incorrect usage of params_physical_width
f0b8a8823f06 ASoC: cs40l26: Remove unused ASP Switch
468770e2856f ASoC: cs40l26: Use PLL Open Loop when changing REFCLK
37a598f9bac0 input: cs40l26: Enable IRQ after error
a81070994853 input: cs40l26: Enable CS40L26 Codec in core driver
fc48e705a381 ASoC: cs40l26: Add CS40L26 Stub Codec Driver
e731f6adaac6 input: cs40l26: Share regmap config between I2C and SPI drivers.
1aacdf180f91 input: cs40l26: Don't build core driver module
6d75aa2d5dc0 input: cs40l26: Remove extra space in function prototype
8d287c195371 Documentation: cs40l26: Add CS40L26A/B devicetree options
74867e2b5f25 input: cs40l26: Add CS40L26A/B devicetree options
0e3bcf4b2e52 input: cs40l26: Read entire mailbox queue upon DSP write
ca583f106052 input: cs40l26: Add Runtime Power Management Support
25b5096dc06d input: cs40l26: Change include location of CL DSP
3884ddc083c2 input: cs40l26: Configure wakesource IRQs based on device settings
5b7430bf8db5 input: cs40l26: Reject indeces exceeding number of loaded waveforms
b664bc4faa40 input: cs40l26: Changes to sysfs controls
f7322edc1820 input: cs40l26: Function to read DSP state
2e1dc1d42ab4 input: cs40l26: Update Copyright Year
ea17111bb00b input: cs40l26: Add debug message for completed playback
17457b94d942 input: cs40l26: Enable DSP Shutdown and Wakeup Commands
705aa77f234c input: cs40l26: Update Start Up Procedure for A0 Silicon
a42bac99c20b input: cs40l26: Remove cs40l26_dsp_shutdown()
89fba3c7e7e1 input: cs40l26: Updates to power on sequence
4123501cf9d0 input: cs40l26: Clear Interrupt after error
f2b73020a677 input: cs40l26: Change IRQ notificatios to dev_dbg()
2be81af5037e input: cs40l26: Change msleep() to usleep_range()
fd8c8f5ab3b0 input: cs40l26: Disable VA and VP Regulators Separately
2175609afa4e input: cs40l26: Add support for CS40L26A/B
c519e1b08467 input: cs40l26: Add Support for SVC tuning
2b87832f2b0f input: cs40l26: Decrease ROM waveform bank granularity
3df8b4237b2e input: cs40l26: Graceful shutdown when handling BST errors
92a3eff7ff40 input: cs40l26: Add Support for Coefficient File Loading
f67aaddce758 input: cs40l26: Correct BUZZGEN duration setting
f25e0fd73654 input: cs40l26: Improve efficiency of Interrupt Handling
c31b95210834 input: cs40l26: Fix error release sequence
2f8d22e816a6 input: cs40l26: Add IRQ unmask function
875e70684e57 Documentation: cs40l26: Add Support for RAM firmware
96b59a7edb94 input: cs40l26: Add Support for RAM firmware
d86abc93be70 Documentation: cs40l26: Add dt-bindings file for CS40L26
71f39122dae9 input: cs40l26: Initial Commit for CS40L26
Branch: v5.10-cirrus-dsp-fw
Tag: cl-dsp-fw-v3.1.0_5.10
Files:
drivers/firmware/cirrus/cl_dsp.c
include/linux/firmware/cirrus/cl_dsp.h
Commits:
47254bf6e2c2 firmware: cirrus: Ignore Silicon Revision when looking for wavetable
f31f14932f72 firmware: cirrus: Warn user about mismatched revisions
97963c7898f1 firmware: cirrus: Let core driver handle revision checking
5ebd6b1cdf42 firmware: cirrus: Add Open Wavetable Support
6149c55ae03e firmware: cirrus: Ignore chip revision when verifying algo id
d5273a4a9ffd firmware: cirrus: Remove check before debug statement.
672fc70f5c74 firmware: cirrus: Move CL DSP to drivers/firmware
f922454891ef input: cl_dsp: Updates to coefficient descriptor list
072f7252b854 input: cl_dsp: Macros for algorithm and firmware revision
cd2c76181a67 input: cl_dsp: Improve Coefficient File Parsing
7f9340b2186d input: cl_dsp: Improve Algorithm Parsing
60323ea6b804 input: cl_dsp: Standardize HALO registers
33ae8822e6ca input: cl_dsp: Parse coeff flags and length
9485dc94122c input: cl_dsp: Process Data in WMFW Header
0af257e7d6c7 input: cl_dsp: Require regmap pointer when creating struct
d5db51b265af input: cl_dsp: Increase maximum number of algorithms
b01a1e0e0219 input: cl_dsp: Option to skip writing to RAM
c7811f4beccb input: cl_dsp: Improve firmware data parsing
276542f62ced input: cl_dsp: Move includes to .h file
ebd97015fa68 input: cl_dsp: Improved memory management
d6bcce379fb0 input: cl_dsp: Move .h file to mfd
6e8352d35ba2 input: cl_dsp: Ensure packed data is aligned to 4 words
ff235ec69691 input: cl_dsp: Catch additional errors in get_reg function
eb65b8e79dbb input: cl_dsp: Support packed types in coefficient files
9f7125dca680 input: cl_dsp: Add support for wavetable date info
a4515a386b9c input: cl_dsp: Add support for expliclty freeing coefficient memory
fbed7662b3be input: cl_dsp: Add Support for Generic Coefficient Files
2a234316bcae input: cl_dsp: Initialize return variable
d5678c49af94 input: cl_dsp: Add support for unpacked types in WMFW
7d7857d11bc9 input: cl_dsp: Add text to Kconfig for cl_dsp
2791c97e5554 input: cl_dsp: Add support for wavetable loading
a728fda6c333 input: cl_dsp: Fix typo in error message
f85e18f4ae46 input: cl_dsp: Add helper function for firmware parsing
fd5b30bc28a7 input: cl_dsp: DSP firmware loading for input devices
Bug: 184610991
Test: n/a
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: I2d29c23aafebe57c46fc2edee354dbc69826faf4
|