diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/8250/8250_early.c | 137 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Kconfig | 1 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 7 | ||||
-rw-r--r-- | drivers/tty/serial/Makefile | 2 | ||||
-rw-r--r-- | drivers/tty/serial/altera_uart.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/earlycon.c | 152 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.c | 5 |
7 files changed, 183 insertions, 123 deletions
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 721904f8efa..e83c9db3300 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -35,18 +35,8 @@ #include <linux/serial_8250.h> #include <asm/io.h> #include <asm/serial.h> -#ifdef CONFIG_FIX_EARLYCON_MEM -#include <asm/pgtable.h> -#include <asm/fixmap.h> -#endif -struct early_serial8250_device { - struct uart_port port; - char options[16]; /* e.g., 115200n8 */ - unsigned int baud; -}; - -static struct early_serial8250_device early_device; +static struct earlycon_device *early_device; unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset) { @@ -100,7 +90,7 @@ static void __init serial_putc(struct uart_port *port, int c) static void __init early_serial8250_write(struct console *console, const char *s, unsigned int count) { - struct uart_port *port = &early_device.port; + struct uart_port *port = &early_device->port; unsigned int ier; /* Save the IER and disable interrupts */ @@ -129,7 +119,7 @@ static unsigned int __init probe_baud(struct uart_port *port) return (port->uartclk / 16) / quot; } -static void __init init_port(struct early_serial8250_device *device) +static void __init init_port(struct earlycon_device *device) { struct uart_port *port = &device->port; unsigned int divisor; @@ -148,127 +138,32 @@ static void __init init_port(struct early_serial8250_device *device) serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); } -static int __init parse_options(struct early_serial8250_device *device, - char *options) -{ - struct uart_port *port = &device->port; - int mmio, mmio32, length; - - if (!options) - return -ENODEV; - - port->uartclk = BASE_BAUD * 16; - - mmio = !strncmp(options, "mmio,", 5); - mmio32 = !strncmp(options, "mmio32,", 7); - if (mmio || mmio32) { - port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); - port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), - &options, 0); - if (mmio32) - port->regshift = 2; -#ifdef CONFIG_FIX_EARLYCON_MEM - set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, - port->mapbase & PAGE_MASK); - port->membase = - (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); - port->membase += port->mapbase & ~PAGE_MASK; -#else - port->membase = ioremap_nocache(port->mapbase, 64); - if (!port->membase) { - printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", - __func__, - (unsigned long long) port->mapbase); - return -ENOMEM; - } -#endif - } else if (!strncmp(options, "io,", 3)) { - port->iotype = UPIO_PORT; - port->iobase = simple_strtoul(options + 3, &options, 0); - mmio = 0; - } else - return -EINVAL; - - options = strchr(options, ','); - if (options) { - options++; - device->baud = simple_strtoul(options, NULL, 0); - length = min(strcspn(options, " "), sizeof(device->options)); - strlcpy(device->options, options, length); - } else { - device->baud = probe_baud(port); - snprintf(device->options, sizeof(device->options), "%u", - device->baud); - } - - if (mmio || mmio32) - printk(KERN_INFO - "Early serial console at MMIO%s 0x%llx (options '%s')\n", - mmio32 ? "32" : "", - (unsigned long long)port->mapbase, - device->options); - else - printk(KERN_INFO - "Early serial console at I/O port 0x%lx (options '%s')\n", - port->iobase, - device->options); - - return 0; -} - -static struct console early_serial8250_console __initdata = { - .name = "uart", - .write = early_serial8250_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1, -}; - -static int __init early_serial8250_setup(char *options) +static int __init early_serial8250_setup(struct earlycon_device *device, + const char *options) { - struct early_serial8250_device *device = &early_device; - int err; - - if (device->port.membase || device->port.iobase) + if (!(device->port.membase || device->port.iobase)) return 0; - err = parse_options(device, options); - if (err < 0) - return err; + if (!device->baud) + device->baud = probe_baud(&device->port); init_port(device); - return 0; -} - -int __init setup_early_serial8250_console(char *cmdline) -{ - char *options; - int err; - - options = strstr(cmdline, "uart8250,"); - if (!options) { - options = strstr(cmdline, "uart,"); - if (!options) - return 0; - } - - options = strchr(cmdline, ',') + 1; - err = early_serial8250_setup(options); - if (err < 0) - return err; - - register_console(&early_serial8250_console); + early_device = device; + device->con->write = early_serial8250_write; return 0; } +EARLYCON_DECLARE(uart8250, early_serial8250_setup); +EARLYCON_DECLARE(uart, early_serial8250_setup); int serial8250_find_port_for_earlycon(void) { - struct early_serial8250_device *device = &early_device; - struct uart_port *port = &device->port; + struct earlycon_device *device = early_device; + struct uart_port *port = device ? &device->port : NULL; int line; int ret; - if (!device->port.membase && !device->port.iobase) + if (!port || (!port->membase && !port->iobase)) return -ENODEV; line = serial8250_find_port(port); @@ -283,5 +178,3 @@ int serial8250_find_port_for_earlycon(void) return ret; } - -early_param("earlycon", setup_early_serial8250_console); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 80fe91e64a5..902c4bf15f0 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -62,6 +62,7 @@ config SERIAL_8250_CONSOLE bool "Console on 8250/16550 and compatible serial port" depends on SERIAL_8250=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 7e7006fd404..1ad9aadc005 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -7,6 +7,13 @@ if TTY menu "Serial drivers" depends on HAS_IOMEM && GENERIC_HARDIRQS +config SERIAL_EARLYCON + bool + help + Support for early consoles with the earlycon parameter. This enables + the console before standard serial driver is probed. The console is + enabled when early_param is processed. + source "drivers/tty/serial/8250/Kconfig" comment "Non-8250 serial port support" diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index eedfec40e3d..e51c680d604 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -5,6 +5,8 @@ obj-$(CONFIG_SERIAL_CORE) += serial_core.o obj-$(CONFIG_SERIAL_21285) += 21285.o +obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o + # These Sparc drivers have to appear before others such as 8250 # which share ttySx minor node space. Otherwise console device # names change and other unplesantries. diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 13471dd9579..d983370eb05 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -231,7 +231,9 @@ static void altera_uart_rx_chars(struct altera_uart *pp) flag); } + spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); } static void altera_uart_tx_chars(struct altera_uart *pp) diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c new file mode 100644 index 00000000000..73bf1e21aae --- /dev/null +++ b/drivers/tty/serial/earlycon.c @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2014 Linaro Ltd. + * Author: Rob Herring <robh@kernel.org> + * + * Based on 8250 earlycon: + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas <bjorn.helgaas@hp.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/console.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/serial_core.h> + +#ifdef CONFIG_FIX_EARLYCON_MEM +#include <asm/fixmap.h> +#endif + +#include <asm/serial.h> + +static struct console early_con = { + .name = "earlycon", + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +static struct earlycon_device early_console_dev = { + .con = &early_con, +}; + +static void __iomem * __init earlycon_map(unsigned long paddr, size_t size) +{ + void __iomem *base; +#ifdef CONFIG_FIX_EARLYCON_MEM + set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr & PAGE_MASK); + base = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + base += paddr & ~PAGE_MASK; +#else + base = ioremap(paddr, size); +#endif + if (!base) + pr_err("%s: Couldn't map 0x%llx\n", __func__, + (unsigned long long)paddr); + + return base; +} + +static int __init parse_options(struct earlycon_device *device, + char *options) +{ + struct uart_port *port = &device->port; + int mmio, mmio32, length, ret; + unsigned long addr; + + if (!options) + return -ENODEV; + + mmio = !strncmp(options, "mmio,", 5); + mmio32 = !strncmp(options, "mmio32,", 7); + if (mmio || mmio32) { + port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); + options += mmio ? 5 : 7; + ret = kstrtoul(options, 0, &addr); + if (ret) + return ret; + port->mapbase = addr; + if (mmio32) + port->regshift = 2; + } else if (!strncmp(options, "io,", 3)) { + port->iotype = UPIO_PORT; + options += 3; + ret = kstrtoul(options, 0, &addr); + if (ret) + return ret; + port->iobase = addr; + mmio = 0; + } else if (!strncmp(options, "0x", 2)) { + port->iotype = UPIO_MEM; + ret = kstrtoul(options, 0, &addr); + if (ret) + return ret; + port->mapbase = addr; + } else { + return -EINVAL; + } + + port->uartclk = BASE_BAUD * 16; + + options = strchr(options, ','); + if (options) { + options++; + ret = kstrtouint(options, 0, &device->baud); + if (ret) + return ret; + length = min(strcspn(options, " ") + 1, + (size_t)(sizeof(device->options))); + strlcpy(device->options, options, length); + } + + if (mmio || mmio32) + pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n", + mmio32 ? "32" : "", + (unsigned long long)port->mapbase, + device->options); + else + pr_info("Early serial console at I/O port 0x%lx (options '%s')\n", + port->iobase, + device->options); + + return 0; +} + +int __init setup_earlycon(char *buf, const char *match, + int (*setup)(struct earlycon_device *, const char *)) +{ + int err; + size_t len; + struct uart_port *port = &early_console_dev.port; + + if (!buf || !match || !setup) + return 0; + + len = strlen(match); + if (strncmp(buf, match, len)) + return 0; + if (buf[len] && (buf[len] != ',')) + return 0; + + buf += len + 1; + + err = parse_options(&early_console_dev, buf); + /* On parsing error, pass the options buf to the setup function */ + if (!err) + buf = NULL; + + if (port->mapbase) + port->membase = earlycon_map(port->mapbase, 64); + + early_console_dev.con->data = &early_console_dev; + err = setup(&early_console_dev, buf); + if (err < 0) + return err; + if (!early_console_dev.con->write) + return -ENODEV; + + register_console(early_console_dev.con); + return 0; +} diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 0c8a9fa2be6..aaa0df1f2fc 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -249,6 +249,8 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id) ufcon |= S3C2410_UFCON_RESETRX; wr_regl(port, S3C2410_UFCON, ufcon); rx_enabled(port) = 1; + spin_unlock_irqrestore(&port->lock, + flags); goto out; } continue; @@ -297,10 +299,11 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id) ignore_char: continue; } + + spin_unlock_irqrestore(&port->lock, flags); tty_flip_buffer_push(&port->state->port); out: - spin_unlock_irqrestore(&port->lock, flags); return IRQ_HANDLED; } |