From 1eaca39a84170b369fe61fb1da3c1e8606859e99 Mon Sep 17 00:00:00 2001 From: Bian Yu Date: Wed, 12 Dec 2012 22:26:58 -0500 Subject: [libata] ahci: Fix lack of command retry after a success error handler. It should be a mistake introduced by commit 8d899e70c1b3afff. qc->flags can't be set AC_ERR_* Signed-off-by: Bian Yu Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index bf039b0e97b..bcf4437214f 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2094,7 +2094,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, */ static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc) { - if (qc->flags & AC_ERR_MEDIA) + if (qc->err_mask & AC_ERR_MEDIA) return 0; /* don't retry media errors */ if (qc->flags & ATA_QCFLAG_IO) return 1; /* otherwise retry anything from fs stack */ -- cgit v1.2.3 From 7f9c9f8e24590e7dcd26ca408458c43df5b83e61 Mon Sep 17 00:00:00 2001 From: Hugh Daschbach Date: Fri, 4 Jan 2013 14:39:09 -0800 Subject: [libata] ahci: Add support for Enmotus Bobcat device. Silicon does not support standard AHCI BAR assignment. Add vendor/device exception to force BAR 2. Signed-off-by: Hugh Daschbach Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7862d17976b..49791273256 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -53,6 +53,7 @@ enum { AHCI_PCI_BAR_STA2X11 = 0, + AHCI_PCI_BAR_ENMOTUS = 2, AHCI_PCI_BAR_STANDARD = 5, }; @@ -410,6 +411,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + /* Enmotus */ + { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, @@ -1098,9 +1102,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev_info(&pdev->dev, "PDC42819 can only drive SATA devices with this driver\n"); - /* The Connext uses non-standard BAR */ + /* Both Connext and Enmotus devices use non-standard BARs */ if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06) ahci_pci_bar = AHCI_PCI_BAR_STA2X11; + else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) + ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; /* acquire resources */ rc = pcim_enable_device(pdev); -- cgit v1.2.3 From 803739d25c2343da6d2f95eebdcbc08bf67097d4 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Mon, 17 Dec 2012 23:18:59 +0800 Subject: [libata] replace sata_settings with devslp_timing NCQ capability was used to check availability of SATA Settings page from Identify Device Data Log, which contains DevSlp timing variables. It does not work on some HDDs and leads to error messages. IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either because it is only the sufficient condition of Identify Device data log, not the necessary condition. This patch replaced ata_device->sata_settings with ->devslp_timing to only save DevSlp timing variables(8 bytes), instead of the whole SATA Settings page(512 bytes). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881 Reported-by: Borislav Petkov Signed-off-by: Shane Huang Cc: stable@vger.kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/libahci.c | 6 +++--- drivers/ata/libata-core.c | 22 +++++++++++++--------- include/linux/ata.h | 8 +++++--- include/linux/libata.h | 4 ++-- 4 files changed, 23 insertions(+), 17 deletions(-) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 320712a7b9e..6cd7805e47c 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1951,13 +1951,13 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) /* Use the nominal value 10 ms if the read MDAT is zero, * the nominal value of DETO is 20 ms. */ - if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] & + if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] & ATA_LOG_DEVSLP_VALID_MASK) { - mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] & + mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] & ATA_LOG_DEVSLP_MDAT_MASK; if (!mdat) mdat = 10; - deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO]; + deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO]; if (!deto) deto = 20; } else { diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9e8b99af400..46cd3f4c6aa 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2325,24 +2325,28 @@ int ata_dev_configure(struct ata_device *dev) } } - /* check and mark DevSlp capability */ - if (ata_id_has_devslp(dev->id)) - dev->flags |= ATA_DFLAG_DEVSLP; - - /* Obtain SATA Settings page from Identify Device Data Log, - * which contains DevSlp timing variables etc. - * Exclude old devices with ata_id_has_ncq() + /* Check and mark DevSlp capability. Get DevSlp timing variables + * from SATA Settings page of Identify Device Data Log. */ - if (ata_id_has_ncq(dev->id)) { + if (ata_id_has_devslp(dev->id)) { + u8 sata_setting[ATA_SECT_SIZE]; + int i, j; + + dev->flags |= ATA_DFLAG_DEVSLP; err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, ATA_LOG_SATA_SETTINGS, - dev->sata_settings, + sata_setting, 1); if (err_mask) ata_dev_dbg(dev, "failed to get Identify Device Data, Emask 0x%x\n", err_mask); + else + for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) { + j = ATA_LOG_DEVSLP_OFFSET + i; + dev->devslp_timing[i] = sata_setting[j]; + } } dev->cdb_len = 16; diff --git a/include/linux/ata.h b/include/linux/ata.h index 408da950217..8f7a3d68371 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -297,10 +297,12 @@ enum { ATA_LOG_SATA_NCQ = 0x10, ATA_LOG_SATA_ID_DEV_DATA = 0x30, ATA_LOG_SATA_SETTINGS = 0x08, - ATA_LOG_DEVSLP_MDAT = 0x30, + ATA_LOG_DEVSLP_OFFSET = 0x30, + ATA_LOG_DEVSLP_SIZE = 0x08, + ATA_LOG_DEVSLP_MDAT = 0x00, ATA_LOG_DEVSLP_MDAT_MASK = 0x1F, - ATA_LOG_DEVSLP_DETO = 0x31, - ATA_LOG_DEVSLP_VALID = 0x37, + ATA_LOG_DEVSLP_DETO = 0x01, + ATA_LOG_DEVSLP_VALID = 0x07, ATA_LOG_DEVSLP_VALID_MASK = 0x80, /* READ/WRITE LONG (obsolete) */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 83ba0ab2c91..649e5f86b5f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -652,8 +652,8 @@ struct ata_device { u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ }; - /* Identify Device Data Log (30h), SATA Settings (page 08h) */ - u8 sata_settings[ATA_SECT_SIZE]; + /* DEVSLP Timing Variables from Identify Device Data Log */ + u8 devslp_timing[ATA_LOG_DEVSLP_SIZE]; /* error history */ int spdn_cnt; -- cgit v1.2.3