# We can build either as part of a standalone Kernel build or as
# an external module.  Determine which mechanism is being used
KERNEL_BUILD := 0


ifeq ($(KERNEL_BUILD), 0)
	# These are configurable via Kconfig for kernel-based builds
	# Need to explicitly configure for Android-based builds
	ifeq ($(CONFIG_ARCH_SDM845), y)
		include $(AUDIO_ROOT)/config/sdm845auto.conf
		export
	endif
	ifeq ($(CONFIG_ARCH_SDM670), y)
		include $(AUDIO_ROOT)/config/sdm670auto.conf
		export
	endif
endif


# As per target team, build is done as follows:
# Defconfig : build with default flags
# Slub      : defconfig  + CONFIG_SLUB_DEBUG := y +
#	      CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y
# Perf      : Using appropriate msmXXXX-perf_defconfig
#
# Shipment builds (user variants) should not have any debug feature
# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
# there is no other way to identify defconfig builds, QTI internal
# representation of perf builds (identified using the string 'perf'),
# is used to identify if the build is a slub or defconfig one. This
# way no critical debug feature will be enabled for perf and shipment
# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
# config.

############ UAPI ############
UAPI_DIR :=	uapi
UAPI_INC :=	-I$(AUDIO_ROOT)/include/$(UAPI_DIR)

############ COMMON ############
COMMON_DIR :=	include
COMMON_INC :=	-I$(AUDIO_ROOT)/$(COMMON_DIR)

############ QDSP6V2 ############

ifeq ($(CONFIG_SND_SOC_MSM_QDSP6V2_INTF), m)
	Q6_OBJS += audio_calibration.o
	Q6_OBJS += audio_cal_utils.o
	Q6_OBJS += msm-dts-srs-tm-config.o
	Q6_OBJS += q6adm.o
	Q6_OBJS += q6afe.o
	Q6_OBJS += q6asm.o
	Q6_OBJS += q6audio-v2.o
	Q6_OBJS += q6voice.o
	Q6_OBJS += q6core.o
	Q6_OBJS += rtac.o
	Q6_OBJS += q6lsm.o
	Q6_OBJS += audio_slimslave.o
	Q6_OBJS += adsp_err.o
	Q6_OBJS += msm_audio_ion.o
	Q6_OBJS += avtimer.o
	Q6_OBJS += q6_init.o
endif
ifeq ($(CONFIG_MSM_ADSP_LOADER), m)
ADSP_LOADER_OBJS += adsp-loader.o
endif

ifeq ($(CONFIG_MSM_QDSP6_NOTIFIER), m)
QDSP6_NOTIFIER_OBJS += audio_notifier.o audio_ssr.o
endif

ifeq ($(CONFIG_MSM_QDSP6_PDR), m)
QDSP6_PDR_OBJS += audio_pdr.o
endif

ifeq ($(CONFIG_MSM_ULTRASOUND), m)
USF_OBJS += usf.o usfcdev.o q6usm.o
endif

LINUX_INC +=	-Iinclude/linux

INCS :=		$(COMMON_INC) \
		$(UAPI_INC)

ifeq ($(CONFIG_ARCH_SDM845), y)
INCS    +=  -include $(AUDIO_ROOT)/config/sdm845autoconf.h
endif
ifeq ($(CONFIG_ARCH_SDM670), y)
INCS    +=  -include $(AUDIO_ROOT)/config/sdm670autoconf.h
endif

EXTRA_CFLAGS += $(INCS)


CDEFINES +=	-DANI_LITTLE_BYTE_ENDIAN \
		-DANI_LITTLE_BIT_ENDIAN \
		-DDOT11F_LITTLE_ENDIAN_HOST \
		-DANI_COMPILER_TYPE_GCC \
		-DANI_OS_TYPE_ANDROID=6 \
		-DPTT_SOCK_SVC_ENABLE \
		-Wall\
		-Werror\
		-D__linux__

KBUILD_CPPFLAGS += $(CDEFINES)

# Currently, for versions of gcc which support it, the kernel Makefile
# is disabling the maybe-uninitialized warning.  Re-enable it for the
# AUDIO driver.  Note that we must use EXTRA_CFLAGS here so that it
# will override the kernel settings.
ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y)
EXTRA_CFLAGS += -Wmaybe-uninitialized
endif
#EXTRA_CFLAGS += -Wmissing-prototypes

ifeq ($(call cc-option-yn, -Wheader-guard),y)
EXTRA_CFLAGS += -Wheader-guard
endif

# If the module name is not "wlan", then the define MULTI_IF_NAME to be the
# same a the QCA CHIP name. The host driver will then append MULTI_IF_NAME to
# any string that must be unique for all instances of the driver on the system.
# This allows multiple instances of the driver with different module names.
# If the module name is wlan, leave MULTI_IF_NAME undefined and the code will
# treat the driver as the primary driver.
ifneq ($(MODNAME), qdsp6v2)
CHIP_NAME ?= $(MODNAME)
CDEFINES += -DMULTI_IF_NAME=\"$(CHIP_NAME)\"
endif

KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/ipc/Module.symvers

obj-$(CONFIG_SND_SOC_MSM_QDSP6V2_INTF) += q6_dlkm.o
q6_dlkm-y := $(Q6_OBJS)

obj-$(CONFIG_MSM_ULTRASOUND) += usf_dlkm.o
usf_dlkm-y := $(USF_OBJS)

obj-$(CONFIG_MSM_ADSP_LOADER) += adsp_loader_dlkm.o
adsp_loader_dlkm-y := $(ADSP_LOADER_OBJS)

obj-$(CONFIG_MSM_QDSP6_NOTIFIER) += q6_notifier_dlkm.o
q6_notifier_dlkm-y := $(QDSP6_NOTIFIER_OBJS)

obj-$(CONFIG_MSM_QDSP6_PDR) += q6_pdr_dlkm.o
q6_pdr_dlkm-y := $(QDSP6_PDR_OBJS)

# inject some build related information
DEFINES += -DBUILD_TIMESTAMP=\"$(shell date -u +'%Y-%m-%dT%H:%M:%SZ')\"