* Qualcomm Technologies, Inc. MSM FLASH

The MSM camera Flash driver provides the definitions for
enabling and disabling LED Torch/Flash by requesting it to
PMIC/I2C/GPIO based hardware. It provides the functions for
the Client to control the Flash hardware.

=======================================================
Required Node Structure
=======================================================
The Flash device is described in one level of the device node.

======================================
First Level Node - CAM FLASH device
======================================
- compatible
  Usage: required
  Value type: <string>
  Definition: Should be "qcom,camera-flash".

- cell-index
  Usage: required
  Value type: <u32>
  Definition: Should specify the hardware index id.

- reg
  Usage: required
  Value type: <u32>
  Definition: Register values.

- flash-source
  Usage: required
  Value type: <phandle>
  Definition: Should contain array of phandles to Flash source nodes.

- torch-source
  Usage: required
  Value type: <phandle>
  Definition: Should contain array of phandles to torch source nodes.

- switch-source
  Usage: Optional
  Value type: <phandle>
  Definition: Should contain phandle to switch source nodes.

- slave-id
  Usage: optional
  Value type: <u32>
  Definition: should contain i2c slave address, device id address
		and expected id read value.

- cci-master
  Usage: optional
  Value type: <u32>
  Definition: should contain i2c master id to be used for this camera
		flash.

- max-current
  Usage: optional
  Value type: <u32>
  Definition: Max current in mA supported by flash

- max-duration
  Usage: optional
  Value type: <u32>
  Definition: Max duration in ms flash can glow.

- wled-flash-support
  Usage: optional
  Value type: <boolean>
  Definition: To identity wled flash hardware support.

- gpios
  Usage: optional
  Value type: <u32>
  Definition: should specify the gpios to be used for the flash.

- gpio-req-tbl-num
  Usage: optional
  Value type: <u32>
  Definition: should specify the gpio table index.

- gpio-req-tbl-flags
  Usage: optional
  Value type: <u32>
  Definition: should specify the gpio functions.

- gpio-req-tbl-label
  Usage: optional
  Value type: <u32>
  Definition: should specify the gpio labels.

- gpio-flash-reset
  Usage: optional
  Value type: <u32>
  Definition: should contain index to gpio used by flash's "flash reset" pin.

- gpio-flash-en
  Usage: optional
  Value type: <u32>
  Definition: should contain index to gpio used by flash's "flash enable" pin.

- gpio-flash-now
  Usage: optional
  Value type: <u32>
  Definition: should contain index to gpio used by flash's "flash now" pin.

Example:

led_flash_rear: qcom,camera-flash@0 {
		reg = <0x00 0x00>;
		cell-index = <0>;
		compatible = "qcom,camera-flash";
		flash-source = <&pmi8998_flash0 &pmi8998_flash1>;
		torch-source = <&pmi8998_torch0 &pmi8998_torch1>;
		switch-source = <&pmi8998_switch0>;
		wled-flash-support;
		qcom,slave-id = <0x00 0x00 0x0011>;
		qcom,cci-master = <0>;
		gpios = <&msmgpio 23 0>,
			<&msmgpio 24 0>;
			<&msmgpio 25 0>;
		qcom,gpio-flash-reset = <0>;
		qcom,gpio-flash-en = <0>;
		qcom,gpio-flash-now = <1>;
		qcom,gpio-req-tbl-num = <0 1>;
		qcom,gpio-req-tbl-flags = <0 0>;
		qcom,gpio-req-tbl-label = "FLASH_EN",
			"FLASH_NOW";
		qcom,max-current = <1500>;
		qcom,max-duration = <1200>;
	};