diff options
| author | Vatsal Bucha <vbucha@qti.qualcomm.com> | 2019-09-16 18:33:28 +0530 |
|---|---|---|
| committer | Gerrit - the friendly Code Review server <code-review@localhost> | 2019-09-21 00:48:44 -0700 |
| commit | f7dbb89f3d215a6f201280957d6735a9c5dab35e (patch) | |
| tree | 0aaa2405bacabfdd1d5f9c9f85b85f7016f39e6f /bindings/pinctrl | |
| parent | eabf05d91db3841e60366740afebf419822d2ff6 (diff) | |
| download | devicetree-f7dbb89f3d215a6f201280957d6735a9c5dab35e.tar.gz | |
bindings: Add node to check for tx data3 and enable gpio
Add dtsi nodes to check for tx data3 line for lito and enable
corresponding gpio if present.
Change-Id: I33ab5dffe0dcd9ece71f3f3848ac847218011df7
Diffstat (limited to 'bindings/pinctrl')
| -rw-r--r-- | bindings/pinctrl/qcom,lpi-pinctrl.txt | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/bindings/pinctrl/qcom,lpi-pinctrl.txt b/bindings/pinctrl/qcom,lpi-pinctrl.txt index 465b39e1..13f9628f 100644 --- a/bindings/pinctrl/qcom,lpi-pinctrl.txt +++ b/bindings/pinctrl/qcom,lpi-pinctrl.txt @@ -49,6 +49,21 @@ Following properties are for LPI GPIO controller device main node. position in bits in the slew register base for slew settings. +- #qcom,tx_data3_enabled: + Usage: optional + Value type: <u32> + Definition: Check if gpio is present for swr tx3 line. + +- #qcom,tx_data3_addr: + Usage: optional + Value type: <u32> + Definition: Used to define address for tx data3 slew rate gpio. + +- #qcom,swr_tx_data3_val: + Usage: optional + Value type: <u32> + Definition: Used to enable tx data3 slew rate if present. + Please refer to ../gpio/gpio.txt for general description of GPIO bindings. Please refer to pinctrl-bindings.txt in this directory for details of the |