ARM: dts: msm: Add charger, QG, ADC and VOL_UP configuration for bengal

Add charger, QG, ADC and VOL_UP IDP-specific device tree
configuration for bengal.

Change-Id: I8ecddcab9ffe70e01e1950263a1763a75697a779

1 files changed, 108 insertions, 0 deletions

diff --git a/qcom/bengal-idp.dtsi b/qcom/bengal-idp.dtsi
index c961eb4b..ff7994fe 100644
--- a/qcom/bengal-idp.dtsi
+++ b/qcom/bengal-idp.dtsi
@@ -1,6 +1,114 @@
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+
 &soc {
+	mtp_batterydata: qcom,battery-data {
+		qcom,batt-id-range-pct = <15>;
+		#include "qg-batterydata-alium-3600mah.dtsi"
+	};
 };
 
 &qupv3_se4_2uart {
 	status = "ok";
 };
+
+&pm6125_vadc {
+	rf_pa1_therm {
+		reg = <ADC_GPIO4_PU2>;
+		label = "rf_pa1_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&pm6125_adc_tm {
+	io-channels = <&pm6125_vadc ADC_AMUX_THM1_PU2>,
+			<&pm6125_vadc ADC_AMUX_THM2_PU2>,
+			<&pm6125_vadc ADC_XO_THERM_PU2>,
+			<&pm6125_vadc ADC_GPIO4_PU2>;
+
+	rf_pa1_therm {
+		reg = <ADC_GPIO4_PU2>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&thermal_zones {
+	rf-pa1-therm-adc {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-governor = "user_space";
+		thermal-sensors = <&pm6125_adc_tm ADC_GPIO4_PU2>;
+		wake-capable-sensor;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+};
+
+&pmi632_qg {
+	qcom,battery-data = <&mtp_batterydata>;
+	qcom,qg-iterm-ma = <100>;
+	qcom,hold-soc-while-full;
+	qcom,linearize-soc;
+	qcom,qg-use-s7-ocv;
+};
+
+&pmi632_charger {
+	qcom,battery-data = <&mtp_batterydata>;
+	qcom,suspend-input-on-debug-batt;
+	qcom,sw-jeita-enable;
+	qcom,step-charging-enable;
+	/* SMB1355 only */
+	qcom,sec-charger-config = <2>;
+	dpdm-supply = <&qusb_phy0>;
+	qcom,charger-temp-max = <800>;
+	qcom,smb-temp-max = <800>;
+	qcom,auto-recharge-soc = <98>;
+	qcom,flash-disable-soc = <10>;
+	qcom,hw-die-temp-mitigation;
+	qcom,hw-connector-mitigation;
+	qcom,connector-internal-pull-kohm = <100>;
+	qcom,float-option = <1>;
+	qcom,thermal-mitigation = <3000000 2500000
+			2000000 1500000 1000000 500000>;
+};
+
+&pm6125_gpios {
+	key_vol_up {
+		key_vol_up_default: key_vol_up_default {
+			pins = "gpio5";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			power-source = <0>;
+		};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		vol_up {
+			label = "volume_up";
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			linux,can-disable;
+			debounce-interval = <15>;
+			gpio-key,wakeup;
+		};
+	};
+};