ARM: dts: msm: Add initial device tree for SDM660

Add initial device tree support for SDM660 target.
This is a snapshot of dtsi files as of msm-4.14
'commit <ca4ff9398e337420b> ("fbdev: msm: Use
dynamic allocation for SID variable")'.

Change-Id: Ia13a516de919c7c6c12a064f76af1ab2a8439e2d

1 files changed, 274 insertions, 0 deletions

diff --git a/qcom/sdm660-qrd.dtsi b/qcom/sdm660-qrd.dtsi
new file mode 100644
index 00000000..d81bff35
--- /dev/null
+++ b/qcom/sdm660-qrd.dtsi
@@ -0,0 +1,274 @@
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "sdm660-camera-sensor-qrd.dtsi"
+#include "sdm660-external-codec.dtsi"
+/ {
+};
+
+&blsp2_uart1_hs {
+	status = "ok";
+};
+
+&uartblsp1dm1 {
+	status = "ok";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart_console_active>;
+};
+
+&sdhc_1 {
+	/* device core power supply */
+	vdd-supply = <&pm660l_l4>;
+	qcom,vdd-voltage-level = <2950000 2950000>;
+	qcom,vdd-current-level = <200 570000>;
+
+	/* device communication power supply */
+	vdd-io-supply = <&pm660_l8>;
+	qcom,vdd-io-always-on;
+	qcom,vdd-io-lpm-sup;
+	qcom,vdd-io-voltage-level = <1800000 1800000>;
+	qcom,vdd-io-current-level = <200 325000>;
+
+	pinctrl-names = "active", "sleep";
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+	status = "ok";
+};
+
+&sdc2_cd_on {
+	config {
+		/delete-property/ bias-pull-up;
+		bias-disable;
+	};
+};
+
+&sdhc_2 {
+	/* device core power supply */
+	vdd-supply = <&pm660l_l5>;
+	qcom,vdd-voltage-level = <2950000 2950000>;
+	qcom,vdd-current-level = <15000 800000>;
+
+	/* device communication power supply */
+	vdd-io-supply = <&pm660l_l2>;
+	qcom,vdd-io-voltage-level = <1800000 2950000>;
+	qcom,vdd-io-current-level = <200 22000>;
+
+	pinctrl-names = "active", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	#address-cells = <0>;
+	interrupt-parent = <&sdhc_2>;
+	interrupts = <0 1 2>;
+	#interrupt-cells = <1>;
+	interrupt-map-mask = <0xffffffff>;
+	interrupt-map = <0 &intc 0 0 125 0
+			1 &intc 0 0 221 0
+			2 &tlmm 54 0>;
+	interrupt-names = "hc_irq", "pwr_irq", "status_irq";
+	cd-gpios = <&tlmm 54 0x0>;
+
+	status = "ok";
+};
+
+&ufsphy1 {
+	vdda-phy-supply = <&pm660l_l1>;
+	vdda-pll-supply = <&pm660_l10>;
+	vddp-ref-clk-supply = <&pm660_l1>;
+	vdda-phy-max-microamp = <51400>;
+	vdda-pll-max-microamp = <14200>;
+	vddp-ref-clk-max-microamp = <100>;
+	vddp-ref-clk-always-on;
+	status = "ok";
+};
+
+&ufs1 {
+	vdd-hba-supply = <&gdsc_ufs>;
+	vdd-hba-fixed-regulator;
+	vcc-supply = <&pm660l_l4>;
+	vccq2-supply = <&pm660_l8>;
+	vcc-max-microamp = <500000>;
+	vccq2-max-microamp = <600000>;
+	status = "ok";
+};
+
+&soc {
+	qcom,msm-ssc-sensors {
+		compatible = "qcom,msm-ssc-sensors";
+	};
+};
+
+&qusb_phy0 {
+	qcom,qusb-phy-init-seq = <0xf8 0x80
+				0x83 0x84
+				0x83 0x88
+				0xc3 0x8c
+				0x30 0x08
+				0x79 0x0c
+				0x21 0x10
+				0x14 0x9c
+				0x9f 0x1c
+				0x00 0x18>;
+};
+
+&pm660_gpios {
+	/* GPIO 4 (NFC_CLK_REQ) */
+	nfc_clk {
+		nfc_clk_default: nfc_clk_default {
+			pins = "gpio4";
+			function = "normal";
+			input-enable;
+			power-source = <1>;
+		};
+	};
+};
+
+&i2c_6 { /* BLSP1 QUP6 (NFC) */
+	status = "okay";
+	nq@28 {
+		compatible = "qcom,nq-nci";
+		reg = <0x28>;
+		qcom,nq-irq = <&tlmm 28 0x00>;
+		qcom,nq-ven = <&tlmm 29 0x00>;
+		qcom,nq-firm = <&tlmm 30 0x00>;
+		qcom,nq-clkreq = <&pm660_gpios 4 0x00>;
+		qcom,nq-esepwr = <&tlmm 31 0x00>;
+		interrupt-parent = <&tlmm>;
+		qcom,clk-src = "BBCLK3";
+		interrupts = <28 0>;
+		interrupt-names = "nfc_irq";
+		pinctrl-names = "nfc_active", "nfc_suspend";
+		pinctrl-0 = <&nfc_int_active &nfc_enable_active
+				&nfc_clk_default>;
+		pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
+		clocks = <&clock_rpmcc RPM_SMD_LN_BB_CLK3_PIN>;
+		clock-names = "ref_clk";
+	};
+};
+
+&pm660l_gpios {
+	/* GPIO 7 for VOL_UP */
+	key_vol_up {
+		key_vol_up_default: key_vol_up_default {
+			pins = "gpio7";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
+&tlmm {
+	pmx_ts_rst_active {
+		ts_rst_active: ts_rst_active {
+			mux {
+				pins = "gpio66";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio66";
+				drive-strength = <16>;
+				bias-pull-up;
+			};
+		};
+	};
+
+	pmx_ts_rst_suspend {
+		ts_rst_suspend: ts_rst_suspend {
+			mux {
+				pins = "gpio66";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio66";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+		};
+	};
+};
+
+&ssphy {
+	fpc-redrive-supply = <&pm660_l11>;
+	qcom,redrive-voltage-level = <0 1800000 1950000>;
+	qcom,redrive-load = <105000>;
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+		status = "ok";
+
+		vol_up {
+			label = "volume_up";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+/ {
+	qrd_batterydata: qcom,battery-data {
+		qcom,batt-id-range-pct = <15>;
+
+		#include "fg-gen3-batterydata-qrd-skuk-4v4-3000mah.dtsi"
+	};
+};
+
+&pm660_fg {
+	qcom,battery-data = <&qrd_batterydata>;
+	qcom,fg-jeita-thresholds = <0 5 55 55>;
+	qcom,battery-thermal-coefficients = [9d 50 ff];
+};
+
+&pm660_haptics {
+	qcom,vmax-mv = <1800>;
+};
+
+&i2c_2 {
+	status = "ok";
+	smb1351_charger: smb1351-charger@1d {
+		compatible = "qcom,smb1351-charger";
+		reg = <0x1d>;
+		qcom,parallel-charger;
+		qcom,float-voltage-mv = <4400>;
+		qcom,recharge-mv = <100>;
+		qcom,parallel-en-pin-polarity = <1>;
+	};
+};
+
+/delete-node/ &tasha_hph_en0;
+/delete-node/ &tasha_hph_en1;
+
+&tasha_snd {
+	qcom,model = "sdm660-tasha-skus-snd-card";
+	qcom,audio-routing =
+		"AIF4 VI", "MCLK",
+		"RX_BIAS", "MCLK",
+		"MADINPUT", "MCLK",
+		"AMIC2", "MIC BIAS2",
+		"MIC BIAS2", "Headset Mic",
+		"DMIC0", "MIC BIAS1",
+		"MIC BIAS1", "Digital Mic0",
+		"DMIC3", "MIC BIAS3",
+		"MIC BIAS3", "Digital Mic3",
+		"DMIC5", "MIC BIAS3",
+		"MIC BIAS3", "Digital Mic5",
+		"SpkrLeft IN", "SPK1 OUT";
+	qcom,msm-mbhc-hphl-swh = <1>;
+	/delete-property/ qcom,us-euro-gpios;
+	/delete-property/ qcom,hph-en0-gpio;
+	/delete-property/ qcom,hph-en1-gpio;
+	qcom,wsa-max-devs = <1>;
+	qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_213>;
+	qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrLeft";
+};
+