summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-09-16ARM: dts: msm: Update skin thermal zone mitigations for KHAJEGopala Krishna Nuthaki
Update quiet-therm skin thermal zone mitigations for khaje based on latest recommendation. Change-Id: I7a6898f2acb9916ea467913761e53c46f6329393
2021-09-15Merge "ARM: dts: msm: Update pm-qos latency on Khaje"qctecmdr
2021-09-15Merge "ARM: dts: msm: Add changes required for pm8010"qctecmdr
2021-09-15Merge "ARM: dts: msm: Enable PCIe1 PCIe2 for RB5 board"qctecmdr
2021-09-15Merge "dt-bindings: regulator: pm8008-regulator: add PM8010 support"qctecmdr
2021-09-15ARM: dts: msm: Enable PCIe1 PCIe2 for RB5 boardZhenlin Lian
Clear qcom,boot-option to get the pcie enumeration during probe. Change-Id: I477b8fa228a58bbb0b64a8d703135f3b04cbc652
2021-09-14ARM: dts: msm: Add changes required for pm8010Kavya Nunna
Update headroom voltages and compatible string for PM8010. Change-Id: I6b1adc255574915f51bd54a67cc62dfeb7debad5
2021-09-14ARM: dts: qcom: specify 1.5A ICL when charging with HVDCP2 at 12VFenglin Wu
Specify 1.5A ICL when charging with HVDCP2 at 12V. This limits the power drawn from HVDCP2 adapter to be less than 18W to avoid HVDCP2 adapter collapsed at 12V. Change-Id: I726877e639dcff39eb10da9a9836438dd59a0c0d
2021-09-14dt-bindings: qpnp-smb5: Add property to specify HVDCP2 12V ICLFenglin Wu
Add property to specify ICL when HVDCP2 working at 12V. Change-Id: I6cf10722873ea9f05ee9254f31c6994e9fda0b6d
2021-09-13Merge "ARM: dts: qcom: disable skin-temp mitigation for khaje-qrd-pm7250b"qctecmdr
2021-09-13ARM: dts: qcom: disable skin-temp mitigation for khaje-qrd-pm7250bFenglin Wu
The skin-temp thermistor is placed very near to parallel charger SMB chip on khaje-qrd-pm7250b device and it would throttle charging current a lot. Disable SW based skin-temp mitigation and rely on the SMB-temp mitigation for thermal regulation. Change-Id: Ide7b2b73a79504a3b3a7a4fa6fae82de4c2a1a06
2021-09-12Merge "ARM: dts: msm: Add device tree support for PM8010"qctecmdr
2021-09-10Merge "ARM: dts: msm: Prevent PM8008 LPM usage for all targets"qctecmdr
2021-09-08Merge "ARM: dts: msm: Add feature config node in qfprom for Khaje"qctecmdr
2021-09-08Merge "ARM: dts: msm: Add PD & EUD support on Khaje ATP Platfom"qctecmdr
2021-09-08ARM: dts: msm: Add feature config node in qfprom for KhajeKomal Bajaj
Add SKU_ID and P_CODE bits in feature config node in qfprom for reading fuse bits for Khaje. Change-Id: I3dedd0f4c9af363b7279f5657d0513b4cd1132bb
2021-09-07ARM: dts: msm: Add PD & EUD support on Khaje ATP PlatfomUdipto Goswami
Add PD and EUD support to usb0 node on khaje atp platform. Change-Id: I6e915aaf65c8bf9a26de6604a13bf16fafd3d5c4
2021-09-06Merge "ARM: dts: msm: add dt support for notifier driver in khaje target"qctecmdr
2021-09-06ARM: dts: msm: add dt support for notifier driver in khaje targetMahadevan
This change adds display device tree change for notifier and panels that requires this support. Change-Id: Icea5caa5bf7738dbcff662ce280168220acb671d
2021-09-03ARM: dts: msm: Update pm-qos latency on KhajeUdipto Goswami
Update pm-qos latency from 61 to 43 in order to align with the proper value. This values is referred from CPU0-WFI-LVL of bengal-pm.dtsi since both are using the same dt file. Change-Id: Ica15e428b84b434d4a9044470706e1a49e899e80
2021-09-01Merge "ARM: dts: msm: Add device tree support for bengalp iot low ram target"qctecmdr
2021-09-01Merge "ARM: dts: msm: Change override param sequence for USB on Khaje"qctecmdr
2021-09-01ARM: dts: msm: Add device tree support for PM8010Komal Bajaj
Add device tree support for IDP with PM8010 for Khaje platform. Change-Id: I09929659d6eae3cb1884f511343292609905f94b
2021-08-27ARM: dts: msm: Change override param sequence for USB on KhajeKrishna Kurapati
This patch changes the param override sequence in Khaje for Electrical compliance testing. This will ensure that QRD and MTP both have same phy tuning values. Change-Id: I4352198005d4b64b5e8f7bfe5cbcb0a29ed9eea6
2021-08-27ARM: dts: msm: Update lcdb ldo/ncp voltage for konaRitesh Kumar
Update lcdb ldo and ncp minimum voltage to 5.6V on Kona lcd platform. Change-Id: I6b4f0319ac04e36592325fe1634dbc06d4e47551
2021-08-27Merge "ARM: dts: msm: Enable rpm_smd cooling device for KHAJE"qctecmdr
2021-08-26Merge "ARM: dts: msm: Give Khaje its own MPM pins mapping configuration"qctecmdr
2021-08-26Merge "dt-bindings: Add mpm documentation"qctecmdr
2021-08-26ARM: dts: msm: Enable rpm_smd cooling device for KHAJEGopala Krishna Nuthaki
Enable rpm_smd cooling device and add to low temp monitor thermal_zones for KHAJE. Change-Id: I91b6e863ee5dff0e623c14c4c3cf01a654d1a9bb
2021-08-26ARM: dts: msm: Give Khaje its own MPM pins mapping configurationTushar Nimkar
Currently both Khaje and bengal use the same MPM pins mapping configuration as they use the same compatible string. USB PHY has a different GIC IRQ on Khaje, so different MPM configuration is required. Change-Id: I558c545c76006f11b32bac41a45b8d4fe328a631
2021-08-26dt-bindings: Add mpm documentationRaghavendra Kakarla
Add documentation for mpm interrupt controller for khaje Change-Id: Ia44c4f9867ff30900ea3e3b3a6fd9b0a4e7fd7aa
2021-08-26ARM: dts: msm: Prevent PM8008 LPM usage for all targetsJishnu Prakash
PMIC PM8008 LDOs do not support low power mode (LPM). If configured for LPM, these LDOs continue to operate in normal power mode (NPM) with the same quiescent current but a reduced over-current protection (OCP) threshold, which can result in OCP triggering. Fix all PM8008 LDOs to use normal power mode (NPM) alone to avoid this. Change-Id: I2c8961eaba0677768da09aeba577a32810c1d50f
2021-08-24ARM: dts: qcom: disable wcd on QRD khaje SKUs without WCDKunlei Zhang
Disable wcd on QRD khaje SKUs which has no WCD9375. Change-Id: I75cea92f3201ef00b1ab11bbaa86a254b50671d9
2021-08-24ARM: dts: msm: Add device tree support for bengalp iot low ram targetVijay Navnath Kamble
Add device tree support for bengalp iot qcs IDP low ram platform like 2Gb. Change-Id: I9ba8ff7070b56f870b87979ba924454aac4f97fd
2021-08-24ARM: dts: msm: Add initial device tree for QRD khaje no WCDlijuang
Add initial device tree files to support QRD Khaje which has no WCD9375. Change-Id: I5632ab97b4e05aa04e8c7a7764d5512c86f32e1f
2021-08-19Merge "ARM: dts: msm: Update QC2 max ICL for PM7250B"qctecmdr
2021-08-19Merge "ARM: dts: qcom: Add support for IRLED strobe in AR Glass"qctecmdr
2021-08-19Merge "ARM: dts: msm: Add usb3-u1u2-disable for msm-4.19 targets"qctecmdr
2021-08-18ARM: dts: qcom: Add support for IRLED strobe in AR GlassRajesh Bharathwaj
Adding support for IRLED Strobe control for hand tracking. Change-Id: Id6e4f3f77f4f812103f75b249d09902b614d45e0
2021-08-17ARM: dts: msm: Add usb3-u1u2-disable for msm-4.19 targetsKrishna Kurapati
U1 and U2 are intermediate low power states. To avoid any instability issues during bus reset (initiaited by host), we are disabling U1 and U2 by default. Change-Id: I20757cc1e1bb8fd95befd575fc68012fbc8dcfe9
2021-08-16ARM: dts: msm: Update QC2 max ICL for PM7250BKavya Nunna
Set adapter current to 2A for QC2 to align with the 18W rating. Change-Id: I3d89f71cdf08e06bfb5ef069af03ff68b0f8fba3
2021-08-16Merge "ARM: dts: msm: Add dt support for smb1394"qctecmdr
2021-08-13Merge "ARM: dts: msm: add dcc config for khaje"qctecmdr
2021-08-13ARM: dts: msm: Add dt support for smb1394Kavya Nunna
Add revid and die-temp channel support for smb1394. Change-Id: I36dcbd4db41960d92d150497d12e67d9fd70d1a2
2021-08-12Merge "ARM: dts: msm: Add driver sw support for vbias skip hw wa"qctecmdr
2021-08-12ARM: dts: msm: add dcc config for khajeYuanfang Zhang
Add dcc config on khaje. Change-Id: Id5821ca7f20541d9430d2ba3431fc7aa0d0bbd00
2021-08-12ARM: dts: msm: Add driver sw support for vbias skip hw waRam Prakash Gupta
Add driver sw support for vbias skip hardware change workaround. This is needed to vote in all the cases to VSS when vdd io regulator is not working in high voltage mode. Change-Id: I29c17151ad0c1a024b205d9925214ae7157ac345
2021-08-10Merge "ARM: dts: msm: Increase vccq2 min voltage to 1.8V"qctecmdr
2021-08-09ARM: dts: msm: Increase vccq2 min voltage to 1.8VRam Prakash Gupta
Currently UFS vccq2 min voltage is 1.7V, increase it to 1.8V to have enough headroom for any possible voltage drooping. Change-Id: I79050232ed53428c42ed8da8913403d4e9f63171
2021-08-09Merge "ARM: dts: msm: Add PCIe switch ASM2806 support for rb5"qctecmdr
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 00:37:52 +0000