From 7babdba8baeab494c6534c97b2dad8520a572b99 Mon Sep 17 00:00:00 2001 From: Swetha Chikkaboraiah Date: Fri, 15 Jan 2021 15:47:41 +0530 Subject: ARM: dts: msm: Add initial device tree for SDM429/439/QM215 Add initial device tree support for SDM429/439/QM215 target. This is a snapshot of dtsi files as of msm-4.9 'commit <033db782f19bcc5b961fcb676404466c2c07d0f8> ("msm: kgsl: Protect the memdesc->gpuaddr in SVM use cases")'. Snapshot of msm-pm8916.dtsi is taken from msm-3.10 And renamed to pm8916.dtsi to be comaptible with 4.19 kernel 'commit <795bad7cbc25468d9b0dc7c011cc7ef2e3f4c0b2> power: qpnp-linear-charger: fix mutex lockup")'. Change-Id: Id25960963b2ffc8bbb23abb6a802d146bb643d02 --- qcom/pm8916.dtsi | 573 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 573 insertions(+) create mode 100644 qcom/pm8916.dtsi (limited to 'qcom/pm8916.dtsi') diff --git a/qcom/pm8916.dtsi b/qcom/pm8916.dtsi new file mode 100644 index 00000000..45cc99ac --- /dev/null +++ b/qcom/pm8916.dtsi @@ -0,0 +1,573 @@ +&spmi_bus { + + qcom,pm8916@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <1>; + + pm8916_revid: qcom,revid@100 { + compatible = "qcom,qpnp-revid"; + reg = <0x100 0x100>; + }; + + pm8916_pon: qcom,power-on@800 { + compatible = "qcom,qpnp-power-on"; + reg = <0x800 0x100>; + interrupts = <0x0 0x8 0x0>, + <0x0 0x8 0x1>; + interrupt-names = "kpdpwr", "resin"; + qcom,pon-dbc-delay = <15625>; + qcom,system-reset; + qcom,clear-warm-reset; + qcom,store-hard-reset-reason; + + qcom,pon_1 { + qcom,pon-type = <0>; + qcom,support-reset = <1>; + qcom,pull-up = <1>; + qcom,s1-timer = <10256>; + qcom,s2-timer = <2000>; + qcom,s2-type = <1>; + linux,code = <116>; + }; + + qcom,pon_2 { + qcom,pon-type = <1>; + qcom,pull-up = <1>; + linux,code = <114>; + }; + }; + + pm8916_mpps: mpps { + gpio-controller; + #gpio-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; + label = "pm8916-mpp"; + + mpp@a000 { + reg = <0xa000 0x100>; + qcom,pin-num = <1>; + }; + + mpp@a100 { + reg = <0xa100 0x100>; + qcom,pin-num = <2>; + }; + + mpp@a200 { + reg = <0xa200 0x100>; + qcom,pin-num = <3>; + }; + + mpp@a300 { + reg = <0xa300 0x100>; + qcom,pin-num = <4>; + }; + }; + + pm8916_gpios: gpios { + gpio-controller; + #gpio-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; + label = "pm8916-gpio"; + + gpio@c000 { + reg = <0xc000 0x100>; + qcom,pin-num = <1>; + }; + + gpio@c100 { + reg = <0xc100 0x100>; + qcom,pin-num = <2>; + }; + + gpio@c200 { + reg = <0xc200 0x100>; + qcom,pin-num = <3>; + }; + + gpio@c300 { + reg = <0xc300 0x100>; + qcom,pin-num = <4>; + }; + }; + + pm8916_rtc: qcom,pm8916_rtc { + compatible = "qcom,qpnp-rtc"; + #address-cells = <1>; + #size-cells = <1>; + qcom,qpnp-rtc-write = <0>; + qcom,qpnp-rtc-alarm-pwrup = <0>; + + qcom,pm8916_rtc_rw@6000 { + reg = <0x6000 0x100>; + }; + + qcom,pm8916_rtc_alarm@6100 { + reg = <0x6100 0x100>; + interrupts = <0x0 0x61 0x1>; + }; + }; + + pm8916_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0x0 0x31 0x0>; + interrupt-names = "eoc-int-en-set"; + qcom,adc-bit-resolution = <15>; + qcom,adc-vdd-reference = <1800>; + qcom,vadc-poll-eoc; + qcom,pmic-revid = <&pm8916_revid>; + + chan@8 { + label = "die_temp"; + reg = <8>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "absolute"; + qcom,scale-function = <3>; + qcom,hw-settle-time = <0>; + qcom,fast-avg-setup = <0>; + }; + + chan@9 { + label = "ref_625mv"; + reg = <9>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "absolute"; + qcom,scale-function = <0>; + qcom,hw-settle-time = <0>; + qcom,fast-avg-setup = <0>; + }; + + chan@a { + label = "ref_1250v"; + reg = <0xa>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "absolute"; + qcom,scale-function = <0>; + qcom,hw-settle-time = <0>; + qcom,fast-avg-setup = <0>; + }; + }; + + pm8916_tz: qcom,temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0x0 0x24 0x0>; + label = "pm8916_tz"; + qcom,channel-num = <8>; + qcom,threshold-set = <0>; + qcom,temp_alarm-vadc = <&pm8916_vadc>; + }; + + pm8916_adc_tm: vadc@3400 { + reg = <0x3400 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0x0 0x34 0x0>, + <0x0 0x34 0x3>, + <0x0 0x34 0x4>; + interrupt-names = "eoc-int-en-set", + "high-thr-en-set", + "low-thr-en-set"; + qcom,adc-bit-resolution = <15>; + qcom,adc-vdd-reference = <1800>; + qcom,adc_tm-vadc = <&pm8916_vadc>; + qcom,pmic-revid = <&pm8916_revid>; + }; + + pm8916_chg: qcom,charger { + #address-cells = <1>; + #size-cells = <1>; + + qcom,vddmax-mv = <4200>; + qcom,vddsafe-mv = <4200>; + qcom,vinmin-mv = <4308>; + qcom,ibatsafe-ma = <1440>; + qcom,thermal-mitigation = <1440 720 630 0>; + qcom,cool-bat-decidegc = <100>; + qcom,warm-bat-decidegc = <450>; + qcom,cool-bat-mv = <4100>; + qcom,warm-bat-mv = <4100>; + qcom,ibatmax-warm-ma = <360>; + qcom,ibatmax-cool-ma = <360>; + qcom,batt-hot-percentage = <25>; + qcom,batt-cold-percentage = <80>; + qcom,tchg-mins = <232>; + qcom,chg-vadc = <&pm8916_vadc>; + qcom,chg-adc_tm = <&pm8916_adc_tm>; + + status = "disabled"; + + qcom,chgr@1000 { + reg = <0x1000 0x100>; + interrupts = <0x0 0x10 0x7>, + <0x0 0x10 0x6>, + <0x0 0x10 0x5>, + <0x0 0x10 0x0>; + interrupt-names = "chg-done", + "chg-failed", + "fast-chg-on", + "vbat-det-lo"; + }; + + qcom,bat-if@1200 { + reg = <0x1200 0x100>; + interrupts = <0x0 0x12 0x1>, + <0x0 0x12 0x0>; + interrupt-names = "bat-temp-ok", + "batt-pres"; + }; + + qcom,usb-chgpth@1300 { + reg = <0x1300 0x100>; + interrupts = <0 0x13 0x4>, + <0 0x13 0x2>, + <0 0x13 0x1>; + interrupt-names = "usb-over-temp", + "chg-gone", + "usbin-valid"; + }; + + qcom,chg-misc@1600 { + reg = <0x1600 0x100>; + }; + }; + + pm8916_bms: qcom,vmbms { + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + qcom,v-cutoff-uv = <3400000>; + qcom,max-voltage-uv = <4200000>; + qcom,r-conn-mohm = <0>; + qcom,shutdown-soc-valid-limit = <100>; + qcom,low-soc-calculate-soc-threshold = <15>; + qcom,low-voltage-calculate-soc-ms = <1000>; + qcom,low-soc-calculate-soc-ms = <5000>; + qcom,calculate-soc-ms = <20000>; + qcom,volatge-soc-timeout-ms = <60000>; + qcom,low-voltage-threshold = <3450000>; + qcom,s3-ocv-tolerence-uv = <1200>; + qcom,s2-fifo-length = <5>; + qcom,low-soc-fifo-length = <2>; + qcom,bms-vadc = <&pm8916_vadc>; + qcom,bms-adc_tm = <&pm8916_adc_tm>; + qcom,pmic-revid = <&pm8916_revid>; + + qcom,force-s3-on-suspend; + qcom,force-s2-in-charging; + qcom,report-charger-eoc; + qcom,resume-soc = <99>; + + qcom,batt-pres-status@1208 { + reg = <0x1208 0x1>; + }; + + qcom,qpnp-chg-pres@1008 { + reg = <0x1008 0x1>; + }; + + qcom,vm-bms@4000 { + reg = <0x4000 0x100>; + interrupts = <0x0 0x40 0x0>, + <0x0 0x40 0x1>, + <0x0 0x40 0x2>, + <0x0 0x40 0x3>, + <0x0 0x40 0x4>, + <0x0 0x40 0x5>; + + interrupt-names = "leave_cv", + "enter_cv", + "good_ocv", + "ocv_thr", + "fifo_update_done", + "fsm_state_change"; + }; + }; + + pm8916_leds: qcom,leds@a100 { + reg = <0xa100 0x100>; + label = "mpp"; + }; + }; + + qcom,pm8916@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <1>; + + regulator@1400 { + regulator-name = "8916_s1"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1700 0x300>; + status = "disabled"; + + qcom,ctl@1700 { + reg = <0x1700 0x100>; + }; + + qcom,ps@1800 { + reg = <0x1800 0x100>; + }; + + qcom,freq@1900 { + reg = <0x1900 0x100>; + }; + }; + + regulator@1a00 { + regulator-name = "8916_s3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1a00 0x300>; + status = "disabled"; + + qcom,ctl@1a00 { + reg = <0x1a00 0x100>; + }; + + qcom,ps@1b00 { + reg = <0x1b00 0x100>; + }; + + qcom,freq@1c00 { + reg = <0x1c00 0x100>; + }; + }; + + regulator@1d00 { + regulator-name = "8916_s4"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1d00 0x300>; + status = "disabled"; + + qcom,ctl@1d00 { + reg = <0x1d00 0x100>; + }; + + qcom,ps@1e00 { + reg = <0x1e00 0x100>; + }; + + qcom,freq@1f00 { + reg = <0x1f00 0x100>; + }; + + }; + + regulator@4000 { + regulator-name = "8916_l1"; + reg = <0x4000 0x100>; + status = "disabled"; + }; + + regulator@4100 { + regulator-name = "8916_l2"; + reg = <0x4100 0x100>; + status = "disabled"; + }; + + regulator@4200 { + regulator-name = "8916_l3"; + reg = <0x4200 0x100>; + status = "disabled"; + }; + + regulator@4300 { + regulator-name = "8916_l4"; + reg = <0x4300 0x100>; + status = "disabled"; + }; + + regulator@4400 { + regulator-name = "8916_l5"; + reg = <0x4400 0x100>; + status = "disabled"; + }; + + regulator@4500 { + regulator-name = "8916_l6"; + reg = <0x4500 0x100>; + status = "disabled"; + }; + + regulator@4600 { + regulator-name = "8916_l7"; + reg = <0x4600 0x100>; + status = "disabled"; + }; + + regulator@4700 { + regulator-name = "8916_l8"; + reg = <0x4700 0x100>; + status = "disabled"; + }; + + regulator@4800 { + regulator-name = "8916_l9"; + reg = <0x4800 0x100>; + status = "disabled"; + }; + + regulator@4900 { + regulator-name = "8916_l10"; + reg = <0x4900 0x100>; + status = "disabled"; + }; + + regulator@4a00 { + regulator-name = "8916_l11"; + reg = <0x4a00 0x100>; + status = "disabled"; + }; + + regulator@4b00 { + regulator-name = "8916_l12"; + reg = <0x4b00 0x100>; + status = "disabled"; + }; + + regulator@4c00 { + regulator-name = "8916_l13"; + reg = <0x4c00 0x100>; + status = "disabled"; + }; + + regulator@4d00 { + regulator-name = "8916_l14"; + reg = <0x4d00 0x100>; + status = "disabled"; + }; + + regulator@4e00 { + regulator-name = "8916_l15"; + reg = <0x4e00 0x100>; + status = "disabled"; + }; + + regulator@4f00 { + regulator-name = "8916_l16"; + reg = <0x4f00 0x100>; + status = "disabled"; + }; + + regulator@5000 { + regulator-name = "8916_l17"; + reg = <0x5000 0x100>; + status = "disabled"; + }; + + regulator@5100 { + regulator-name = "8916_l18"; + reg = <0x5100 0x100>; + status = "disabled"; + }; + + pm8916_pwm: qcom,pwms@bc00 { + compatible = "qcom,pwm-lpg"; + reg = <0xbc00 0x100>; + reg-names = "qpnp-lpg-channel-base"; + qcom,channel-id = <0>; + qcom,supported-sizes = <6>, <9>; + #pwm-cells = <2>; + }; + + pm8916_vib: qcom,vibrator@c000 { + compatible = "qcom,qpnp-vibrator"; + reg = <0xc000 0x100>; + label = "vibrator"; + status = "disabled"; + }; + + pm8916_tombak_dig: msm8x16_wcd_codec@f000 { + reg = <0xf000 0x100>; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0>, + <0x1 0xf0 0x1>, + <0x1 0xf0 0x2>, + <0x1 0xf0 0x3>, + <0x1 0xf0 0x4>, + <0x1 0xf0 0x5>, + <0x1 0xf0 0x6>, + <0x1 0xf0 0x7>; + interrupt-names = "spk_cnp_int", + "spk_clip_int", + "spk_ocp_int", + "ins_rem_det1", + "but_rel_det", + "but_press_det", + "ins_rem_det", + "mbhc_int"; + + cdc-vdda-cp-supply = <&pm8916_s4>; + qcom,cdc-vdda-cp-voltage = <1800000 2200000>; + qcom,cdc-vdda-cp-current = <770000>; + + cdc-vdda-h-supply = <&pm8916_l5>; + qcom,cdc-vdda-h-voltage = <1800000 1800000>; + qcom,cdc-vdda-h-current = <20000>; + + cdc-vdd-px-supply = <&pm8916_s4>; + qcom,cdc-vdd-px-voltage = <1800000 2200000>; + qcom,cdc-vdd-px-current = <770000>; + + cdc-vdd-pa-supply = <&pm8916_l5>; + qcom,cdc-vdd-pa-voltage = <1800000 1800000>; + qcom,cdc-vdd-pa-current = <5000>; + + cdc-vdd-mic-bias-supply = <&pm8916_l13>; + qcom,cdc-vdd-mic-bias-voltage = <3075000 3075000>; + qcom,cdc-vdd-mic-bias-current = <25000>; + + qcom,cdc-mclk-clk-rate = <9600000>; + + qcom,cdc-static-supplies = "cdc-vdda-h", + "cdc-vdd-px", + "cdc-vdd-pa", + "cdc-vdda-cp"; + + qcom,cdc-on-demand-supplies = "cdc-vdd-mic-bias"; + }; + + pm8916_tombak_analog: msm8x16_wcd_codec@f100 { + reg = <0xf100 0x100>; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf1 0x0>, + <0x1 0xf1 0x1>, + <0x1 0xf1 0x2>, + <0x1 0xf1 0x3>, + <0x1 0xf1 0x4>, + <0x1 0xf1 0x5>; + interrupt-names = "ear_ocp_int", + "hphr_ocp_int", + "hphl_ocp_det", + "ear_cnp_int", + "hphr_cnp_int", + "hphl_cnp_int"; + }; + + pm8916_bcm: qpnp-buck-current-monitor@1800 { + reg = <0x1800 0x100>; + interrupts = <1 0x18 0>, <1 0x18 1>; + interrupt-names = "iwarning", "icritical"; + qcom,enable-current-monitor; + qcom,icrit-init-threshold-pc = <90>; + qcom,iwarn-init-threshold-pc = <70>; + qcom,icrit-polling-delay-msec = <1000>; + qcom,iwarn-polling-delay-msec = <2000>; + + status = "disabled"; + }; + }; +}; -- cgit v1.2.3