Qualcomm Technologies, Inc. I2C PMIC Interrupt Controller
Platform Independent Bindings

The I2C PMIC Controller is used by multi-function PMIC devices which communicate
over the I2C bus. An I2C PMIC controller node typically contains one or more
child nodes representing the device's peripherals. Each of the peripherals
typically has its own driver on the platform bus and will be enumerated by this
controller. The controller exposes a regmap to the peripherals to communicate
over the I2C bus.

The controller also controls interrupts for all of the peripherals on the bus.
The controller takes a summary interrupt, deciphers which peripheral triggered
the interrupt, and which of the peripheral's interrupts were triggered. Finally,
it calls the handlers for each of the virtual interrupts that were registered.

This document describes the common platform independent bindings that apply
to all I2C PMIC interrupt controllers.

========================================
First Level Nodes - I2C PMIC Controllers
========================================

Platform independent properties:
- compatible
	Usage:      required
	Value type: <string>
	Definition: Must be "qcom,i2c-pmic".

- reg
	Usage:      required
	Value type: <u32>
	Definition: 7-bit I2C address of the device.

- interrupt-parent
	Usage:      optional
	Value type: <phandle>
	Definition: phandle of the interrupt controller which services the
		    summary interrupt.

- interrupts
	Usage:      optional
	Value type: <prop-encoded-array>
	Definition: Summary interrupt specifier.

- interrupt-controller
	Usage:      optional
	Value type: <empty>
	Definition: Boolean flag which indicates this device node is an
		    interrupt controller.

- #interrupt-cells
	Usage:      optional
	Value type: <u32>
	Definition: Number of cells to encode an interrupt source.

- qcom,periph-map
	Usage:      optional
	Value type: <prop-encoded-array>
	Definition: A list of u32 arrays. This provides a mapping between the
		    summary status register bits and peripheral addresses.

		    The number of arrays should match the number of summary
		    registers with up to 8 elements each. One element per bit
		    of the summary status register in order from the least
		    sigificant bit to the most significant bit.

- pinctrl-names
	Usage:      optional
	Value type: <string-list>
	Definition: Should be "default".
		    Please refer to pinctrl-bindings.txt

- pinctrl-0
	Usage:      optional
	Value type: <phandle-list>
	Definition: phandle of the pin configuration.
		    Please refer to pinctrl-bindings.txt

- qcom,enable-toggle-stat
	Usage:      optional
	Value type: bool
	Definition: Enables stat interrupt toggle at init.

=======
Example
=======

&i2c_3 {
	status = "ok";
	qcom,smb138x@8 {
		compatible = "qcom,i2c-pmic";
		reg = <0x8>;
		interrupt-parent = <&tlmm_pinmux>;
		interrupts = <83 0>;
		interrupt-controller;
		#interrupt-cells = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&smb_stat_active>;
		#address-cells = <1>;
		#size-cells = <0>;
		qcom,periph-map = <0x10 0x11 0x12 0x13 0x14 0x16 0x36>;
	};
};