&soc {
	tlmm: pinctrl@f000000 {
		compatible = "qcom,lito-pinctrl";
		reg = <0x0f000000 0x1000000>;
		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		wakeup-parent = <&pdc>;
		irqdomain-map = <0 0 &pdc 58 0>,
				<3 0 &pdc 44 0>,
				<4 0 &pdc 80 0>,
				<5 0 &pdc 89 0>,
				<6 0 &pdc 52 0>,
				<9 0 &pdc 104 0>,
				<10 0 &pdc 54 0>,
				<11 0 &pdc 62 0>,
				<22 0 &pdc 64 0>,
				<24 0 &pdc 82 0>,
				<26 0 &pdc 56 0>,
				<30 0 &pdc 84 0>,
				<31 0 &pdc 43 0>,
				<32 0 &pdc 79 0>,
				<33 0 &pdc 66 0>,
				<34 0 &pdc 53 0>,
				<36 0 &pdc 92 0>,
				<37 0 &pdc 63 0>,
				<38 0 &pdc 73 0>,
				<39 0 &pdc 76 0>,
				<41 0 &pdc 81 0>,
				<42 0 &pdc 94 0>,
				<43 0 &pdc 55 0>,
				<45 0 &pdc 83 0>,
				<46 0 &pdc 57 0>,
				<47 0 &pdc 86 0>,
				<48 0 &pdc 121 0>,
				<49 0 &pdc 87 0>,
				<50 0 &pdc 90 0>,
				<52 0 &pdc 72 0>,
				<53 0 &pdc 96 0>,
				<55 0 &pdc 91 0>,
				<56 0 &pdc 135 0>,
				<57 0 &pdc 137 0>,
				<58 0 &pdc 93 0>,
				<59 0 &pdc 136 0>,
				<62 0 &pdc 97 0>,
				<64 0 &pdc 65 0>,
				<65 0 &pdc 75 0>,
				<66 0 &pdc 98 0>,
				<67 0 &pdc 99 0>,
				<68 0 &pdc 100 0>,
				<69 0 &pdc 46 0>,
				<70 0 &pdc 85 0>,
				<72 0 &pdc 50 0>,
				<73 0 &pdc 45 0>,
				<74 0 &pdc 101 0>,
				<78 0 &pdc 42 0>,
				<82 0 &pdc 88 0>,
				<83 0 &pdc 51 0>,
				<84 0 &pdc 102 0>,
				<85 0 &pdc 113 0>,
				<86 0 &pdc 95 0>,
				<87 0 &pdc 103 0>,
				<88 0 &pdc 114 0>,
				<90 0 &pdc 105 0>,
				<97 0 &pdc 70 0>,
				<98 0 &pdc 106 0>,
				<100 0 &pdc 59 0>,
				<103 0 &pdc 60 0>,
				<105 0 &pdc 71 0>,
				<107 0 &pdc 78 0>,
				<108 0 &pdc 61 0>,
				<109 0 &pdc 134 0>,
				<110 0 &pdc 48 0>,
				<111 0 &pdc 67 0>,
				<112 0 &pdc 68 0>,
				<113 0 &pdc 77 0>,
				<114 0 &pdc 69 0>,
				<115 0 &pdc 133 0>,
				<116 0 &pdc 109 0>,
				<117 0 &pdc 120 0>,
				<119 0 &pdc 110 0>,
				<121 0 &pdc 119 0>,
				<122 0 &pdc 112 0>,
				<124 0 &pdc 107 0>,
				<126 0 &pdc 111 0>,
				<127 0 &pdc 116 0>,
				<128 0 &pdc 132 0>,
				<133 0 &pdc 131 0>,
				<135 0 &pdc 130 0>,
				<138 0 &pdc 129 0>,
				<139 0 &pdc 128 0>,
				<140 0 &pdc 127 0>,
				<141 0 &pdc 126 0>,
				<142 0 &pdc 125 0>,
				<144 0 &pdc 122 0>;
		irqdomain-map-mask = <0xff 0>;
		irqdomain-map-pass-thru = <0 0xff>;


		trigout_a: trigout_a {
			mux {
				pins = "gpio63";
				function = "qdss_cti";
			};

			config {
				pins = "gpio63";
				drive-strength = <2>;
				bias-disable;
			};
		};

		qupv3_se2_2uart_pins: qupv3_se2_2uart_pins {
			qupv3_se2_2uart_active: qupv3_se2_2uart_active {
				mux {
					pins = "gpio36", "gpio37";
					function = "qup02";
				};

				config {
					pins = "gpio36", "gpio37";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se2_2uart_sleep: qupv3_se2_2uart_sleep {
				mux {
					pins = "gpio36", "gpio37";
					function = "gpio";
				};

				config {
					pins = "gpio36", "gpio37";
					drive-strength = <2>;
					bias-pull-down;
				};
			};
		};

		qupv3_se5_4uart_pins: qupv3_se5_4uart_pins {
			qupv3_se5_ctsrx: qupv3_se5_ctsrx {
				mux {
					pins = "gpio38", "gpio41";
					function = "qup05";
				};

				config {
					pins = "gpio38", "gpio41";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se5_rts: qupv3_se5_rts {
				mux {
					pins = "gpio39";
					function = "qup05";
				};

				config {
					pins = "gpio39";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			qupv3_se5_tx: qupv3_se5_tx {
				mux {
					pins = "gpio40";
					function = "qup05";
				};

				config {
					pins = "gpio40";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se8_2uart_pins: qupv3_se8_2uart_pins {
			qupv3_se8_2uart_active: qupv3_se8_2uart_active {
				mux {
					pins = "gpio51", "gpio52";
					function = "qup12";
				};

				config {
					pins = "gpio51", "gpio52";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se8_2uart_sleep: qupv3_se8_2uart_sleep {
				mux {
					pins = "gpio51", "gpio52";
					function = "gpio";
				};

				config {
					pins = "gpio51", "gpio52";
					drive-strength = <2>;
					bias-pull-down;
				};
			};
		};

		qupv3_se0_i3c_pins: qupv3_se0_i3c_pins {
			qupv3_se0_i3c_active: qupv3_se0_i3c_active {
				mux {
					pins = "gpio42", "gpio43";
					function = "ibi_i3c";
				};

				config {
					pins = "gpio42", "gpio43";
					drive-strength = <16>;
					bias-pull-up;
				};
			};

			qupv3_se0_i3c_sleep: qupv3_se0_i3c_sleep {
				mux {
					pins = "gpio42", "gpio43";
					function = "gpio";
				};

				config {
					pins = "gpio42", "gpio43";
					drive-strength = <2>;
					bias-disable;
				};
			};
		};

		qupv3_se6_i3c_pins: qupv3_se6_i3c_pins {
			qupv3_se6_i3c_active: qupv3_se6_i3c_active {
				mux {
					pins = "gpio59", "gpio60";
					function = "ibi_i3c";
				};

				config {
					pins = "gpio59", "gpio60";
					drive-strength = <16>;
					bias-pull-up;
				};
			};

			qupv3_se6_i3c_sleep: qupv3_se6_i3c_sleep {
				mux {
					pins = "gpio59", "gpio60";
					function = "gpio";
				};

				config {
					pins = "gpio59", "gpio60";
					drive-strength = <2>;
					bias-disable;
				};
			};
		};

		ufs_dev_reset_assert: ufs_dev_reset_assert {
			config {
				pins = "ufs_reset";
				bias-pull-down;		/* default: pull down */
				/*
				 * UFS_RESET driver strengths are having
				 * different values/steps compared to typical
				 * GPIO drive strengths.
				 *
				 * Following table clarifies:
				 *
				 * HDRV value | UFS_RESET | Typical GPIO
				 *   (dec)    |   (mA)    |    (mA)
				 *     0      |   0.8     |    2
				 *     1      |   1.55    |    4
				 *     2      |   2.35    |    6
				 *     3      |   3.1     |    8
				 *     4      |   3.9     |    10
				 *     5      |   4.65    |    12
				 *     6      |   5.4     |    14
				 *     7      |   6.15    |    16
				 *
				 * POR value for UFS_RESET HDRV is 3 which means
				 * 3.1mA and we want to use that. Hence just
				 * specify 8mA to "drive-strength" binding and
				 * that should result into writing 3 to HDRV
				 * field.
				 */
				drive-strength = <8>;	/* default: 3.1 mA */
				output-low; /* active low reset */
			};
		};

		ufs_dev_reset_deassert: ufs_dev_reset_deassert {
			config {
				pins = "ufs_reset";
				bias-pull-down;		/* default: pull down */
				/*
				 * default: 3.1 mA
				 * check comments under ufs_dev_reset_assert
				 */
				drive-strength = <8>;
				output-high; /* active low reset */
			};
		};

		/* SDC pin type */
		sdc1_clk_on: sdc1_clk_on {
			config {
				pins = "sdc1_clk";
				bias-disable;		/* NO pull */
				drive-strength = <16>;	/* 16 MA */
			};
		};

		sdc1_clk_off: sdc1_clk_off {
			config {
				pins = "sdc1_clk";
				bias-disable;		/* NO pull */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_cmd_on: sdc1_cmd_on {
			config {
				pins = "sdc1_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc1_cmd_off: sdc1_cmd_off {
			config {
				pins = "sdc1_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_data_on: sdc1_data_on {
			config {
				pins = "sdc1_data";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc1_data_off: sdc1_data_off {
			config {
				pins = "sdc1_data";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_rclk_on: sdc1_rclk_on {
			config {
				pins = "sdc1_rclk";
				bias-pull-down; /* pull down */
			};
		};

		sdc1_rclk_off: sdc1_rclk_off {
			config {
				pins = "sdc1_rclk";
				bias-pull-down; /* pull down */
			};
		};

		sdc2_clk_on: sdc2_clk_on {
			config {
				pins = "sdc2_clk";
				bias-disable;		/* NO pull */
				drive-strength = <16>;	/* 16 MA */
			};
		};

		sdc2_clk_off: sdc2_clk_off {
			config {
				pins = "sdc2_clk";
				bias-disable;		/* NO pull */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc2_cmd_on: sdc2_cmd_on {
			config {
				pins = "sdc2_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc2_cmd_off: sdc2_cmd_off {
			config {
				pins = "sdc2_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc2_data_on: sdc2_data_on {
			config {
				pins = "sdc2_data";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc2_data_off: sdc2_data_off {
			config {
				pins = "sdc2_data";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc2_cd_on: cd_on {
			mux {
				pins = "gpio69";
				function = "gpio";
			};

			config {
				pins = "gpio69";
				drive-strength = <2>;
				bias-pull-up;
			};
		};

		sdc2_cd_off: cd_off {
			mux {
				pins = "gpio69";
				function = "gpio";
			};

			config {
				pins = "gpio69";
				drive-strength = <2>;
				bias-disable;
			};
		};

		/* WSA speaker reset pins */
		spkr_1_sd_n {
			spkr_1_sd_n_sleep: spkr_1_sd_n_sleep {
				mux {
					pins = "gpio58";
					function = "gpio";
				};

				config {
					pins = "gpio58";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;
					input-enable;
				};
			};

			spkr_1_sd_n_active: spkr_1_sd_n_active {
				mux {
					pins = "gpio58";
					function = "gpio";
				};

				config {
					pins = "gpio58";
					drive-strength = <16>;   /* 16 mA */
					bias-disable;
					output-high;
				};
			};
		};

		spkr_2_sd_n {
			spkr_2_sd_n_sleep: spkr_2_sd_n_sleep {
				mux {
					pins = "gpio65";
					function = "gpio";
				};

				config {
					pins = "gpio65";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;
					input-enable;
				};
			};

			spkr_2_sd_n_active: spkr_2_sd_n_active {
				mux {
					pins = "gpio65";
					function = "gpio";
				};

				config {
					pins = "gpio65";
					drive-strength = <16>;   /* 16 mA */
					bias-disable;
					output-high;
				};
			};
		};

		wcd938x_reset_active: wcd938x_reset_active {
			mux {
				pins = "gpio57";
				function = "gpio";
			};

			config {
				pins = "gpio57";
				drive-strength = <16>;
				output-high;
			};
		};

		wcd938x_reset_sleep: wcd938x_reset_sleep {
			mux {
				pins = "gpio57";
				function = "gpio";
			};

			config {
				pins = "gpio57";
				drive-strength = <16>;
				bias-disable;
				output-low;
			};
		};

		/* Camera GPIOs  CCI*/
		cci0_active: cci0_active {
			mux {
				/* CLK, DATA */
				pins = "gpio17", "gpio18";
				function = "cci_i2c";
			};

			config {
				pins = "gpio17", "gpio18";
				bias-pull-up; /* PULL UP*/
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci0_suspend: cci0_suspend {
			mux {
				/* CLK, DATA */
				pins = "gpio17", "gpio18";
				function = "cci_i2c";
			};

			config {
				pins = "gpio17", "gpio18";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci1_active: cci1_active {
			mux {
				/* CLK, DATA */
				pins = "gpio19", "gpio20";
				function = "cci_i2c";
			};

			config {
				pins = "gpio19", "gpio20";
				bias-pull-up; /* PULL UP*/
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci1_suspend: cci1_suspend {
			mux {
				/* CLK, DATA */
				pins = "gpio19", "gpio20";
				function = "cci_i2c";
			};

			config {
				pins = "gpio19", "gpio20";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci2_active: cci2_active {
			mux {
				/* CLK, DATA */
				pins = "gpio27", "gpio28";
				function = "cci_i2c";
			};

			config {
				pins = "gpio27", "gpio28";
				bias-pull-up; /* PULL UP*/
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci2_suspend: cci2_suspend {
			mux {
				/* CLK, DATA */
				pins = "gpio27", "gpio28";
				function = "cci_i2c";
			};

			config {
				pins = "gpio27", "gpio28";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		/* Camera GPIOs  CCI*/
		cam_sensor_mclk0_active: cam_sensor_mclk0_active {
			/* MCLK0 */
			mux {
				pins = "gpio13";
				function = "cam_mclk";
			};

			config {
				pins = "gpio13";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
			/* MCLK0 */
			mux {
				pins = "gpio13";
				function = "cam_mclk";
			};

			config {
				pins = "gpio13";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk1_active: cam_sensor_mclk1_active {
			/* MCLK1 */
			mux {
				pins = "gpio14";
				function = "cam_mclk";
			};

			config {
				pins = "gpio14";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
			/* MCLK1 */
			mux {
				pins = "gpio14";
				function = "cam_mclk";
			};

			config {
				pins = "gpio14";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk2_active: cam_sensor_mclk2_active {
			/* MCLK2 */
			mux {
				pins = "gpio15";
				function = "cam_mclk";
			};

			config {
				pins = "gpio15";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
			/* MCLK2 */
			mux {
				pins = "gpio15";
				function = "cam_mclk";
			};

			config {
				pins = "gpio15";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk3_active: cam_sensor_mclk3_active {
			/* MCLK3 */
			mux {
				pins = "gpio16";
				function = "cam_mclk";
			};

			config {
				pins = "gpio16";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
			/* MCLK3 */
			mux {
				pins = "gpio16";
				function = "cam_mclk";
			};

			config {
				pins = "gpio16";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk4_active: cam_sensor_mclk4_active {
			/* MCLK4 */
			mux {
				pins = "gpio25";
				function = "cam_mclk";
			};

			config {
				pins = "gpio25";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk4_suspend: cam_sensor_mclk4_suspend {
			/* MCLK4 */
			mux {
				pins = "gpio25";
				function = "cam_mclk";
			};

			config {
				pins = "gpio25";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_active_rear: cam_sensor_active_rear {
			/* RESET REAR2 */
			mux {
				pins = "gpio30";
				function = "gpio";
			};

			config {
				pins = "gpio30";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_suspend_rear: cam_sensor_suspend_rear {
			/* RESET REAR2 */
			mux {
				pins = "gpio30";
				function = "gpio";
			};

			config {
				pins = "gpio30";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
				output-low;
			};
		};

		cam_sensor_active_rear_aux: cam_sensor_active_rear_aux {
			/* RESET REARAUX,DVDD ELDO */
			mux {
				pins = "gpio29", "gpio71";
				function = "gpio";
			};

			config {
				pins = "gpio29", "gpio71";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_suspend_rear_aux: cam_sensor_suspend_rear_aux {
			/* RESET REARAUX,DVDD ELDO */
			mux {
				pins = "gpio29", "gpio71";
				function = "gpio";
			};

			config {
				pins = "gpio29", "gpio71";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
				output-low;
			};
		};

		cam_sensor_active_triple_rear_aux:
			cam_sensor_active_triple_rear_aux {
			/* RESET REARAUX,AVDD ELDO */
			mux {
				pins = "gpio29", "gpio70";
				function = "gpio";
			};

			config {
				pins = "gpio29", "gpio70";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_suspend_triple_rear_aux:
			cam_sensor_suspend_triple_rear_aux {
			/* RESET REARAUX,AVDD ELDO */
			mux {
				pins = "gpio29", "gpio70";
				function = "gpio";
			};

			config {
				pins = "gpio29", "gpio70";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
				output-low;
			};
		};

		cam_sensor_active_rear_aux2: cam_sensor_active_rear_aux2 {
			/* RESET REARAUX2,CSI MUX Sel */
			mux {
				pins = "gpio21", "gpio51";
				function = "gpio";
			};

			config {
				pins = "gpio21", "gpio51";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_suspend_rear_aux2: cam_sensor_suspend_rear_aux2 {
			/* RESET REARAUX2, CSI MUX Sel */
			mux {
				pins = "gpio21", "gpio51";
				function = "gpio";
			};

			config {
				pins = "gpio21", "gpio51";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
				output-low;
			};
		};

		cam_sensor_active_3: cam_sensor_active_3 {
			/* RESET TOF */
			mux {
				pins = "gpio23";
				function = "gpio";
			};

			config {
				pins = "gpio23";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_suspend_3: cam_sensor_suspend_3 {
			/* RESET TOF */
			mux {
				pins = "gpio23";
				function = "gpio";
			};

			config {
				pins = "gpio23";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
				output-low;
			};
		};

		cam_sensor_active_front: cam_sensor_active_front {
			/* RESET FRONT */
			mux {
				pins = "gpio32";
				function = "gpio";
			};

			config {
				pins = "gpio32";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_suspend_front: cam_sensor_suspend_front {
			/* RESET FRONT */
			mux {
				pins = "gpio32";
				function = "gpio";
			};

			config {
				pins = "gpio32";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
				output-low;
			};
		};

		/* QUPv3_0 North SE mappings */
		/* SE 0 pin mappings */
		qupv3_se0_i2c_pins: qupv3_se0_i2c_pins {
			qupv3_se0_i2c_active: qupv3_se0_i2c_active {
				mux {
					pins = "gpio42", "gpio43";
					function = "qup00";
				};

				config {
					pins = "gpio42", "gpio43";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se0_i2c_sleep: qupv3_se0_i2c_sleep {
				mux {
					pins = "gpio42", "gpio43";
					function = "gpio";
				};

				config {
					pins = "gpio42", "gpio43";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		nfc {
			nfc_int_active: nfc_int_active {
				/* active state */
				mux {
					/* GPIO 34 NFC Read Interrupt */
					pins = "gpio34";
					function = "gpio";
				};

				config {
					pins = "gpio34";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_int_suspend: nfc_int_suspend {
				/* sleep state */
				mux {
					/* GPIO 34 NFC Read Interrupt */
					pins = "gpio34";
					function = "gpio";
				};

				config {
					pins = "gpio34";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_enable_active: nfc_enable_active {
				/* active state */
				mux {
					/* 12: Enable 35: Firmware */
					pins = "gpio12", "gpio35";
					function = "gpio";
				};

				config {
					pins = "gpio12", "gpio35";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_enable_suspend: nfc_enable_suspend {
				/* sleep state */
				mux {
					/* 12: Enable 35: Firmware */
					pins = "gpio12", "gpio35";
					function = "gpio";
				};

				config {
					pins = "gpio12", "gpio35";
					drive-strength = <2>; /* 2 MA */
					bias-disable;
				};
			};

			nfc_clk_req_active: nfc_clk_req_active {
				/* active state */
				mux {
					/* GPIO 31: NFC CLOCK REQUEST */
					pins = "gpio31";
					function = "gpio";
				};

				config {
					pins = "gpio31";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_clk_req_suspend: nfc_clk_req_suspend {
				/* sleep state */
				mux {
					/* GPIO 31: NFC CLOCK REQUEST */
					pins = "gpio31";
					function = "gpio";
				};

				config {
					pins = "gpio31";
					drive-strength = <2>; /* 2 MA */
					bias-disable;
				};
			};
		};

		/* SE 1 pin mappings */
		qupv3_se1_i2c_pins: qupv3_se1_i2c_pins {
			qupv3_se1_i2c_active: qupv3_se1_i2c_active {
				mux {
					pins = "gpio0", "gpio1";
					function = "qup01";
				};

				config {
					pins = "gpio0", "gpio1";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se1_i2c_sleep: qupv3_se1_i2c_sleep {
				mux {
					pins = "gpio0", "gpio1";
					function = "gpio";
				};

				config {
					pins = "gpio0", "gpio1";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		/* SE 2 pin mappings */
		qupv3_se2_i2c_pins: qupv3_se2_i2c_pins {
			qupv3_se2_i2c_active: qupv3_se2_i2c_active {
				mux {
					pins = "gpio34", "gpio35";
					function = "qup02";
				};

				config {
					pins = "gpio34", "gpio35";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se2_i2c_sleep: qupv3_se2_i2c_sleep {
				mux {
					pins = "gpio34", "gpio35";
					function = "gpio";
				};

				config {
					pins = "gpio34", "gpio35";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		/* SE 4 pin mappings */
		qupv3_se4_i2c_pins: qupv3_se4_i2c_pins {
			qupv3_se4_i2c_active: qupv3_se4_i2c_active {
				mux {
					pins = "gpio31", "gpio32";
					function = "qup04";
				};

				config {
					pins = "gpio31", "gpio32";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se4_i2c_sleep: qupv3_se4_i2c_sleep {
				mux {
					pins = "gpio31", "gpio32";
					function = "gpio";
				};

				config {
					pins = "gpio31", "gpio32";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		/* SE 5 pin mappings */
		qupv3_se5_i2c_pins: qupv3_se5_i2c_pins {
			qupv3_se5_i2c_active: qupv3_se5_i2c_active {
				mux {
					pins = "gpio38", "gpio39";
					function = "qup05";
				};

				config {
					pins = "gpio38", "gpio39";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se5_i2c_sleep: qupv3_se5_i2c_sleep {
				mux {
					pins = "gpio38", "gpio39";
					function = "gpio";
				};

				config {
					pins = "gpio38", "gpio39";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		/* QUPv3_1 South_1 SE mappings */
		/* SE 6 pin mappings */
		qupv3_se6_i2c_pins: qupv3_se6_i2c_pins {
			qupv3_se6_i2c_active: qupv3_se6_i2c_active {
				mux {
					pins = "gpio59", "gpio60";
					function = "qup10";
				};

				config {
					pins = "gpio59", "gpio60";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se6_i2c_sleep: qupv3_se6_i2c_sleep {
				mux {
					pins = "gpio59", "gpio60";
					function = "gpio";
				};

				config {
					pins = "gpio59", "gpio60";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		/* SE 7 pin mappings */
		qupv3_se7_i2c_pins: qupv3_se7_i2c_pins {
			qupv3_se7_i2c_active: qupv3_se7_i2c_active {
				mux {
					pins = "gpio6", "gpio7";
					function = "qup11";
				};

				config {
					pins = "gpio6", "gpio7";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se7_i2c_sleep: qupv3_se7_i2c_sleep {
				mux {
					pins = "gpio6", "gpio7";
					function = "gpio";
				};

				config {
					pins = "gpio6", "gpio7";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		/* SE 8 pin mappings */
		qupv3_se8_i2c_pins: qupv3_se8_i2c_pins {
			qupv3_se8_i2c_active: qupv3_se8_i2c_active {
				mux {
					pins = "gpio49", "gpio50";
					function = "qup12";
				};

				config {
					pins = "gpio49", "gpio50";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se8_i2c_sleep: qupv3_se8_i2c_sleep {
				mux {
					pins = "gpio49", "gpio50";
					function = "gpio";
				};

				config {
					pins = "gpio49", "gpio50";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		/* SE 9 pin mappings */
		qupv3_se9_i2c_pins: qupv3_se9_i2c_pins {
			qupv3_se9_i2c_active: qupv3_se9_i2c_active {
				mux {
					pins = "gpio46", "gpio47";
					function = "qup13";
				};

				config {
					pins = "gpio46", "gpio47";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se9_i2c_sleep: qupv3_se9_i2c_sleep {
				mux {
					pins = "gpio46", "gpio47";
					function = "gpio";
				};

				config {
					pins = "gpio46", "gpio47";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		/* SE 10 pin mappings */
		qupv3_se10_i2c_pins: qupv3_se10_i2c_pins {
			qupv3_se10_i2c_active: qupv3_se10_i2c_active {
				mux {
					pins = "gpio53", "gpio54";
					function = "qup14";
				};

				config {
					pins = "gpio53", "gpio54";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se10_i2c_sleep: qupv3_se10_i2c_sleep {
				mux {
					pins = "gpio53", "gpio54";
					function = "gpio";
				};

				config {
					pins = "gpio53", "gpio54";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		/* SE 11 pin mappings */
		qupv3_se11_i2c_pins: qupv3_se11_i2c_pins {
			qupv3_se11_i2c_active: qupv3_se11_i2c_active {
				mux {
					pins = "gpio108", "gpio109";
					function = "qup15";
				};

				config {
					pins = "gpio108", "gpio109";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se11_i2c_sleep: qupv3_se11_i2c_sleep {
				mux {
					pins = "gpio108", "gpio109";
					function = "gpio";
				};

				config {
					pins = "gpio108", "gpio109";
					drive-strength = <2>;
					bias-no-pull;
				};
			};
		};

		qupv3_se0_spi_pins: qupv3_se0_spi_pins {
			qupv3_se0_spi_active: qupv3_se0_spi_active {
				mux {
					pins = "gpio42", "gpio43", "gpio44",
								"gpio45";
					function = "qup00";
				};

				config {
					pins = "gpio42", "gpio43", "gpio44",
								"gpio45";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se0_spi_sleep: qupv3_se0_spi_sleep {
				mux {
					pins = "gpio42", "gpio43", "gpio44",
								"gpio45";
					function = "gpio";
				};

				config {
					pins = "gpio42", "gpio43", "gpio44",
								"gpio45";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se1_spi_pins: qupv3_se1_spi_pins {
			qupv3_se1_spi_active: qupv3_se1_spi_active {
				mux {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					function = "qup01";
				};

				config {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se1_spi_sleep: qupv3_se1_spi_sleep {
				mux {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					function = "gpio";
				};

				config {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se2_spi_pins: qupv3_se2_spi_pins {
			qupv3_se2_spi_active: qupv3_se2_spi_active {
				mux {
					pins = "gpio34", "gpio35", "gpio36",
								"gpio37";
					function = "qup02";
				};

				config {
					pins = "gpio34", "gpio35", "gpio36",
								"gpio37";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se2_spi_sleep: qupv3_se2_spi_sleep {
				mux {
					pins = "gpio34", "gpio35", "gpio36",
								"gpio37";
					function = "gpio";
				};

				config {
					pins = "gpio34", "gpio35", "gpio36",
								"gpio37";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se4_spi_pins: qupv3_se4_spi_pins {
			qupv3_se4_spi_active: qupv3_se4_spi_active {
				mux {
					pins = "gpio31", "gpio32", "gpio29",
								"gpio30";
					function = "qup04";
				};

				config {
					pins = "gpio31", "gpio32", "gpio29",
								"gpio30";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se4_spi_sleep: qupv3_se4_spi_sleep {
				mux {
					pins = "gpio31", "gpio32", "gpio29",
								"gpio30";
					function = "gpio";
				};

				config {
					pins = "gpio31", "gpio32", "gpio29",
								"gpio30";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se5_spi_pins: qupv3_se5_spi_pins {
			qupv3_se5_spi_active: qupv3_se5_spi_active {
				mux {
					pins = "gpio38", "gpio39", "gpio40",
								"gpio41";
					function = "qup05";
				};

				config {
					pins = "gpio38", "gpio39", "gpio40",
								"gpio41";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se5_spi_sleep: qupv3_se5_spi_sleep {
				mux {
					pins = "gpio38", "gpio39", "gpio40",
								"gpio41";
					function = "gpio";
				};

				config {
					pins = "gpio38", "gpio39", "gpio40",
								"gpio41";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se6_spi_pins: qupv3_se6_spi_pins {
			qupv3_se6_spi_active: qupv3_se6_spi_active {
				mux {
					pins = "gpio59", "gpio60", "gpio61",
								"gpio62";
					function = "qup10";
				};

				config {
					pins = "gpio59", "gpio60", "gpio61",
								"gpio62";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se6_spi_sleep: qupv3_se6_spi_sleep {
				mux {
					pins = "gpio59", "gpio60", "gpio61",
								"gpio62";
					function = "gpio";
				};

				config {
					pins = "gpio59", "gpio60", "gpio61",
								"gpio62";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se7_spi_pins: qupv3_se7_spi_pins {
			qupv3_se7_spi_active: qupv3_se7_spi_active {
				mux {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					function = "qup11";
				};

				config {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se7_spi_sleep: qupv3_se7_spi_sleep {
				mux {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					function = "gpio";
				};

				config {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se8_spi_pins: qupv3_se8_spi_pins {
			qupv3_se8_spi_active: qupv3_se8_spi_active {
				mux {
					pins = "gpio49", "gpio50", "gpio51",
								"gpio52";
					function = "qup12";
				};

				config {
					pins = "gpio49", "gpio50", "gpio51",
								"gpio52";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se8_spi_sleep: qupv3_se8_spi_sleep {
				mux {
					pins = "gpio49", "gpio50", "gpio51",
								"gpio52";
					function = "gpio";
				};

				config {
					pins = "gpio49", "gpio50", "gpio51",
								"gpio52";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se9_spi_pins: qupv3_se9_spi_pins {
			qupv3_se9_spi_active: qupv3_se9_spi_active {
				mux {
					pins = "gpio46", "gpio47", "gpio48",
								"gpio63";
					function = "qup13";
				};

				config {
					pins = "gpio46", "gpio47", "gpio48",
								"gpio63";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se9_spi_sleep: qupv3_se9_spi_sleep {
				mux {
					pins = "gpio46", "gpio47", "gpio48",
								"gpio63";
					function = "gpio";
				};

				config {
					pins = "gpio46", "gpio47", "gpio48",
								"gpio63";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se10_spi_pins: qupv3_se10_spi_pins {
			qupv3_se10_spi_active: qupv3_se10_spi_active {
				mux {
					pins = "gpio53", "gpio54", "gpio55",
								"gpio56";
					function = "qup14";
				};

				config {
					pins = "gpio53", "gpio54", "gpio55",
								"gpio56";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se10_spi_sleep: qupv3_se10_spi_sleep {
				mux {
					pins = "gpio53", "gpio54", "gpio55",
								"gpio56";
					function = "gpio";
				};

				config {
					pins = "gpio53", "gpio54", "gpio55",
								"gpio56";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		qupv3_se11_spi_pins: qupv3_se11_spi_pins {
			qupv3_se11_spi_active: qupv3_se11_spi_active {
				mux {
					pins = "gpio108", "gpio109", "gpio112",
								"gpio113";
					function = "qup15";
				};

				config {
					pins = "gpio108", "gpio109", "gpio112",
								"gpio113";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se11_spi_sleep: qupv3_se11_spi_sleep {
				mux {
					pins = "gpio108", "gpio109", "gpio112",
								"gpio113";
					function = "gpio";
				};

				config {
					pins = "gpio108", "gpio109", "gpio112",
								"gpio113";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		pmx_ts_active {
			ts_active: ts_active {
				mux {
					pins = "gpio8", "gpio9";
					function = "gpio";
				};

				config {
					pins = "gpio8", "gpio9";
					drive-strength = <8>;
					bias-pull-up;
				};
			};
		};

		pmx_ts_int_suspend {
			ts_int_suspend: ts_int_suspend {
				mux {
					pins = "gpio9";
					function = "gpio";
				};

				config {
					pins = "gpio9";
					drive-strength = <2>;
					bias-pull-down;
				};
			};
		};

		pmx_ts_reset_suspend {
			ts_reset_suspend: ts_reset_suspend {
				mux {
					pins = "gpio8";
					function = "gpio";
				};

				config {
					pins = "gpio8";
					drive-strength = <2>;
					bias-pull-down;
				};
			};
		};

		pmx_ts_release {
			pmx_ts_release: pmx_ts_release {
				mux {
					pins = "gpio8", "gpio9";
					function = "gpio";
				};

				config {
					pins = "gpio8", "gpio9";
					drive-strength = <2>;
					bias-disable;
				};
			};
		};

		pmx_sde_te {
			sde_te_active: sde_te_active {
				mux {
					pins = "gpio10";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio10";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};

			sde_te_suspend: sde_te_suspend {
				mux {
					pins = "gpio10";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio10";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};

			sde_te1_active: sde_te1_active {
				mux {
					pins = "gpio11";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio11";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};

			sde_te1_suspend: sde_te1_suspend {
				mux {
					pins = "gpio11";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio11";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};
		};

		sde_dp_usbplug_cc_suspend: sde_dp_usbplug_cc_susppend {
			mux {
				pins = "gpio114";
				function = "";
			};

				config {
				pins = "gpio114";
				bias-pull-down;
				drive-strength = <2>;
			};
		};

		sde_dp_usbplug_cc_active: sde_dp_usbplug_cc_active {
			mux {
				pins = "gpio114";
				function = "gpio";
			};

			config {
				pins = "gpio114";
				bias-disable;
				drive-strenght = <16>;
			};
		};

		pm8008_interrupt: pm8008_interrupt {
			mux {
				pins = "gpio45";
				function = "gpio";
			};

			config {
				pins = "gpio45";
				bias-disable;
				input-enable;
			};
		};

		pm8008_active: pm8008_active {
			mux {
				pins = "gpio44";
				function = "gpio";
			};

			config {
				pins = "gpio44";
				bias-pull-up;
				output-high;
				drive-strength = <2>;
			};
		};
	};
};