&cci {
	#address-cells = <1>;
	#size-cells = <0>;

	actuator0: qcom,actuator@0 {
		cell-index = <0>;
		reg = <0x0>;
		compatible = "qcom,actuator";
		qcom,cci-master = <0>;
		cam_vaf-supply = <&pm8916_l10>;
		qcom,cam-vreg-name = "cam_vaf";
		qcom,cam-vreg-min-voltage = <2850000>;
		qcom,cam-vreg-max-voltage = <2850000>;
		qcom,cam-vreg-op-mode = <80000>;
	};

	eeprom0: qcom,eeprom@0 {
		cell-index = <0>;
		compatible = "qcom,eeprom";
		qcom,cci-master = <0>;
		reg = <0x0>;
		cam_vana-supply = <&pm8916_l16>;
		cam_vio-supply = <&pm8916_l6>;
		cam_vaf-supply = <&pm8916_l10>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";
		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <0 80000 100000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_default
				&cam_sensor_rear_vdig_qm215
				&cam_sensor_rear_default>;
		pinctrl-1 = <&cam_sensor_mclk0_sleep
				&cam_sensor_rear_vdig_sleep_qm215
				&cam_sensor_rear_sleep>;
		gpios = <&tlmm 25 0>,
			<&tlmm 26 0>,
			<&tlmm 36 0>;
		qcom,gpio-reset = <2>;
		qcom,gpio-vdig = <0>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <0 1 0>;
		qcom,gpio-req-tbl-label = "CAM_VDIG",
			"CAMIF_MCLK0",
			"CAM_RESET0";
		status = "ok";
		clocks = <&gcc MCLK0_CLK_SRC>,
			<&gcc GCC_CAMSS_MCLK0_CLK>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <19200000 0>;
	};

	eeprom2: qcom,eeprom@2 {
		cell-index = <2>;
		compatible = "qcom,eeprom";
		reg = <0x02>;
		cam_vana-supply = <&pm8916_l16>;
		cam_vio-supply = <&pm8916_l6>;
		cam_vaf-supply = <&pm8916_l10>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";
		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <0 80000 100000>;
		qcom,gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_default
				&cam_sensor_rear_vdig_qm215
				&cam_sensor_front1_default>;
		pinctrl-1 = <&cam_sensor_mclk2_sleep
				&cam_sensor_rear_vdig_sleep_qm215
				&cam_sensor_front1_sleep>;
		gpios = <&tlmm 25 0>,
			<&tlmm 28 0>,
			<&tlmm 40 0>;
		qcom,gpio-reset = <2>;
		qcom,gpio-standby = <0>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0 >;
		qcom,gpio-req-tbl-label = "CAM_VDIG",
			"CAMIF_MCLK2",
			"CAM_RESET2",
			"CAM_STANDBY2";
		qcom,cci-master = <0>;
		status = "ok";
		clocks = <&gcc MCLK2_CLK_SRC>,
			<&gcc GCC_CAMSS_MCLK2_CLK>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <19200000 0>;
	};

	flash0: qcom,camera-flash {
		cell-index = <0>;
		compatible = "qcom,qm215-gpio-flash";
		qcom,flash-type = <2>;
		gpios = <&tlmm 34 0>,
			<&tlmm 33 0>;
		qcom,gpio-req-tbl-num = <0 1>;
		qcom,gpio-req-tbl-flags = <1 0>;
		qcom,gpio-flash-en = <0>;
		qcom,gpio-flash-now = <1>;
		qcom,gpio-req-tbl-label = "CAM_FLASH",
				"CAM_TORCH";
		status = "ok";
	};

	qcom,camera@0 {
		cell-index = <0>;
		compatible = "qcom,camera";
		reg = <0x0>;
		qcom,csiphy-sd-index = <0>;
		qcom,csid-sd-index = <0>;
		qcom,mount-angle = <90>;
		qcom,led-flash-src = <&flash0>;
		qcom,actuator-src = <&actuator0>;
		qcom,eeprom-src = <&eeprom0>;
		cam_vana-supply = <&pm8916_l16>;
		cam_vio-supply = <&pm8916_l6>;
		cam_vaf-supply = <&pm8916_l10>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";
		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <0 80000 100000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_default
				&cam_sensor_rear_vdig_qm215
				&cam_sensor_rear_default>;
		pinctrl-1 = <&cam_sensor_mclk0_sleep
				&cam_sensor_rear_vdig_sleep_qm215
				&cam_sensor_rear_sleep>;
		gpios = <&tlmm 25 0>,
			<&tlmm 26 0>,
			<&tlmm 36 0>;

		qcom,gpio-reset = <2>;
		qcom,gpio-vdig = <0>;
		qcom,gpio-req-tbl-num = <0 1 2 >;
		qcom,gpio-req-tbl-flags = <1 0 0 >;
		qcom,gpio-req-tbl-label = "CAM_VDIG",
			"CAMIF_MCLK0",
			"CAM_RESET0";
		qcom,sensor-position = <0>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		clocks = <&gcc MCLK0_CLK_SRC>,
			<&gcc GCC_CAMSS_MCLK0_CLK>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
	};

	qcom,camera@2 {
		cell-index = <2>;
		compatible = "qcom,camera";
		reg = <0x01>;
		qcom,csiphy-sd-index = <1>;
		qcom,csid-sd-index = <1>;
		qcom,eeprom-src = <&eeprom2>;
		qcom,mount-angle = <270>;
		cam_vana-supply = <&pm8916_l16>;
		cam_vio-supply = <&pm8916_l6>;
		cam_vaf-supply = <&pm8916_l10>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";
		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <0 80000 100000>;
		qcom,gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_default
				&cam_sensor_rear_vdig_qm215
				&cam_sensor_front1_default>;
		pinctrl-1 = <&cam_sensor_mclk2_sleep
				&cam_sensor_rear_vdig_sleep_qm215
				&cam_sensor_front1_sleep>;
		gpios = <&tlmm 25 0>,
			<&tlmm 28 0>,
			<&tlmm 40 0>;
		qcom,gpio-reset = <2>;
		qcom,gpio-vdig = <0>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAM_VDIG",
			"CAMIF_MCLK2",
			"CAM_RESET2";
		qcom,sensor-position = <1>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		clocks = <&gcc MCLK2_CLK_SRC>,
			<&gcc GCC_CAMSS_MCLK2_CLK>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
	};
};