/dts-v1/;

#include "sdm660.dtsi"
#include "sdm660-pinctrl.dtsi"
#include "msm-pm660a.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. SDM 660 PM660 + PM660A SIM";
	compatible = "qcom,sdm660-sim", "qcom,sdm660", "qcom,sim";
	qcom,board-id = <16 0>;
	qcom,pmic-id = <0x0001001b 0x0001011a 0x0 0x0>;

	chosen {
		bootargs = "lpm_levels.sleep_disabled=1";
	};
};

&usb3 {
	reg = <0xa800000 0xfc000>;
	reg-names = "core_base";
	/delete-property/ extcon;
	dwc3@a800000 {
		maximum-speed = "high-speed";
	};
};

&ssphy {
	compatible =  "usb-nop-xceiv";
};

&qusb_phy0 {
	compatible =  "usb-nop-xceiv";
};

&uartblsp1dm1 {
	status = "ok";
	pinctrl-names = "default";
	pinctrl-0 = <&uart_console_active>;
};

&sdhc_1 {
	/* device core power supply */
	vdd-supply = <&pm660l_l4>;
	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <200 570000>;

	/* device communication power supply */
	vdd-io-supply = <&pm660_l8>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-lpm-sup;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <200 325000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

	qcom,clk-rates = <400000 20000000 25000000 50000000 192000000
								384000000>;

	qcom,nonremovable;
	qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";

	status = "ok";
};

&pm660_charger {
	status = "disabled";
};

&pm660_fg {
	status = "disabled";
};

&pm660_pdphy {
	status = "disabled";
};

&ufsphy1 {
	vdda-phy-supply = <&pm660l_l1>;
	vdda-pll-supply = <&pm660_l10>;
	vddp-ref-clk-supply = <&pm660_l1>;
	vdda-phy-max-microamp = <51400>;
	vdda-pll-max-microamp = <14200>;
	vddp-ref-clk-max-microamp = <100>;
	vddp-ref-clk-always-on;
	status = "ok";
};

&ufs1 {
	vdd-hba-supply = <&gdsc_ufs>;
	vdd-hba-fixed-regulator;
	vcc-supply = <&pm660l_l4>;
	vccq2-supply = <&pm660_l8>;
	vcc-max-microamp = <500000>;
	vccq2-max-microamp = <600000>;
	status = "ok";
};