From 6c83456601e65a6dd371ddf595510183d198e9b1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 28 May 2020 14:57:47 -0700 Subject: net: be more gentle about silly gso requests coming from user commit 7c6d2ecbda83150b2036a2b36b21381ad4667762 upstream. Recent change in virtio_net_hdr_to_skb() broke some packetdrill tests. When --mss=XXX option is set, packetdrill always provide gso_type & gso_size for its inbound packets, regardless of packet size. if (packet->tcp && packet->mss) { if (packet->ipv4) gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; gso.gso_size = packet->mss; } Since many other programs could do the same, relax virtio_net_hdr_to_skb() to no longer return an error, but instead ignore gso settings. This keeps Willem intent to make sure no malicious packet could reach gso stack. Note that TCP stack has a special logic in tcp_set_skb_tso_segs() to clear gso_size for small packets. Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry") Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Acked-by: Willem de Bruijn Signed-off-by: David S. Miller Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- include/linux/virtio_net.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 1c296f370e46..f32fe7080d2e 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -109,16 +109,17 @@ retry: if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { u16 gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size); + struct skb_shared_info *shinfo = skb_shinfo(skb); - if (skb->len - p_off <= gso_size) - return -EINVAL; - - skb_shinfo(skb)->gso_size = gso_size; - skb_shinfo(skb)->gso_type = gso_type; + /* Too small packets are not really GSO ones. */ + if (skb->len - p_off > gso_size) { + shinfo->gso_size = gso_size; + shinfo->gso_type = gso_type; - /* Header must be checked, and gso_segs computed. */ - skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY; - skb_shinfo(skb)->gso_segs = 0; + /* Header must be checked, and gso_segs computed. */ + shinfo->gso_type |= SKB_GSO_DODGY; + shinfo->gso_segs = 0; + } } return 0; -- cgit v1.2.3 From 81abe6ad4d99550deeeb4e6a058f213097659929 Mon Sep 17 00:00:00 2001 From: yu kuai Date: Mon, 1 Jun 2020 20:38:56 +0800 Subject: block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed commit a75ca9303175d36af93c0937dd9b1a6422908b8d upstream. commit e7bf90e5afe3 ("block/bio-integrity: fix a memory leak bug") added a kfree() for 'buf' if bio_integrity_add_page() returns '0'. However, the object will be freed in bio_integrity_free() since 'bio->bi_opf' and 'bio->bi_integrity' were set previousy in bio_integrity_alloc(). Fixes: commit e7bf90e5afe3 ("block/bio-integrity: fix a memory leak bug") Signed-off-by: yu kuai Reviewed-by: Ming Lei Reviewed-by: Bob Liu Acked-by: Martin K. Petersen Signed-off-by: Jens Axboe Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- block/bio-integrity.c | 1 - 1 file changed, 1 deletion(-) diff --git a/block/bio-integrity.c b/block/bio-integrity.c index 5bd90cd4b51e..a059fad53f1b 100644 --- a/block/bio-integrity.c +++ b/block/bio-integrity.c @@ -293,7 +293,6 @@ bool bio_integrity_prep(struct bio *bio) if (ret == 0) { printk(KERN_ERR "could not attach integrity payload\n"); - kfree(buf); status = BLK_STS_RESOURCE; goto err_end_io; } -- cgit v1.2.3 From 62b4f338185a9b0831c16dcd2e579c24550d8a4f Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Sun, 24 May 2020 10:24:41 +0300 Subject: fanotify: fix ignore mask logic for events on child and on dir commit 2f02fd3fa13e51713b630164f8a8e5b42de8283b upstream. The comments in fanotify_group_event_mask() say: "If the event is on dir/child and this mark doesn't care about events on dir/child, don't send it!" Specifically, mount and filesystem marks do not care about events on child, but they can still specify an ignore mask for those events. For example, a group that has: - A mount mark with mask 0 and ignore_mask FAN_OPEN - An inode mark on a directory with mask FAN_OPEN | FAN_OPEN_EXEC with flag FAN_EVENT_ON_CHILD A child file open for exec would be reported to group with the FAN_OPEN event despite the fact that FAN_OPEN is in ignore mask of mount mark, because the mark iteration loop skips over non-inode marks for events on child when calculating the ignore mask. Move ignore mask calculation to the top of the iteration loop block before excluding marks for events on dir/child. Link: https://lore.kernel.org/r/20200524072441.18258-1-amir73il@gmail.com Reported-by: Jan Kara Link: https://lore.kernel.org/linux-fsdevel/20200521162443.GA26052@quack2.suse.cz/ Fixes: 55bf882c7f13 "fanotify: fix merging marks masks with FAN_ONDIR" Fixes: b469e7e47c8a "fanotify: fix handling of events on child..." Signed-off-by: Amir Goldstein Signed-off-by: Jan Kara Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- fs/notify/fanotify/fanotify.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c index a18b8d7a3075..ca3405f73264 100644 --- a/fs/notify/fanotify/fanotify.c +++ b/fs/notify/fanotify/fanotify.c @@ -114,6 +114,10 @@ static bool fanotify_should_send_event(struct fsnotify_iter_info *iter_info, if (!fsnotify_iter_should_report_type(iter_info, type)) continue; mark = iter_info->marks[type]; + + /* Apply ignore mask regardless of ISDIR and ON_CHILD flags */ + marks_ignored_mask |= mark->ignored_mask; + /* * If the event is for a child and this mark doesn't care about * events on a child, don't send it! @@ -124,7 +128,6 @@ static bool fanotify_should_send_event(struct fsnotify_iter_info *iter_info, continue; marks_mask |= mark->mask; - marks_ignored_mask |= mark->ignored_mask; } if (d_is_dir(path->dentry) && -- cgit v1.2.3 From 944a95a97b81372924e6893dfd5dfab565da4521 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 24 Apr 2020 18:44:56 +0200 Subject: mtd: rawnand: marvell: Fix the condition on a return code [ Upstream commit c27075772d1f1c8aaf276db9943b35adda8a8b65 ] In a previous fix, I changed the condition on which the timeout of an IRQ is reached from: if (!ret) into: if (ret && !pending) While having a non-zero return code is usual in the Linux kernel, here ret comes from a wait_for_completion_timeout() which returns 0 when the waiting period is too long. Hence, the revised condition should be: if (!ret && !pending) The faulty patch did not produce any error because of the !pending condition so this change is finally purely cosmetic and does not change the actual driver behavior. Fixes: cafb56dd741e ("mtd: rawnand: marvell: prevent timeouts on a loaded machine") Signed-off-by: Miquel Raynal Reviewed-by: Boris Brezillon Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-2-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin --- drivers/mtd/nand/raw/marvell_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index 3e542224dd11..a917bc242c9c 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -637,7 +637,7 @@ static int marvell_nfc_wait_op(struct nand_chip *chip, unsigned int timeout_ms) * In case the interrupt was not served in the required time frame, * check if the ISR was not served or if something went actually wrong. */ - if (ret && !pending) { + if (!ret && !pending) { dev_err(nfc->dev, "Timeout waiting for RB signal\n"); return -ETIMEDOUT; } -- cgit v1.2.3 From 290ba51c25d23418006426961566f9fe44a9c018 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Tue, 20 Nov 2018 15:17:01 -0800 Subject: net: bcmgenet: remove HFB_CTRL access [ Upstream commit 24d476db6dfb0f85130e348ca1bbd14afb73a8be ] Commit c5a54bbcecec ("net: bcmgenet: abort suspend on error") mistakenly introduced register accesses that should not occur in bcmgenet_wol_power_up_cfg(). Fixes: c5a54bbcecec ("net: bcmgenet: abort suspend on error") Signed-off-by: Doug Berger Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c index b3596e0ee47b..57582efa362d 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c @@ -191,10 +191,6 @@ void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv, reg &= ~MPD_EN; bcmgenet_umac_writel(priv, reg, UMAC_MPD_CTRL); - reg = bcmgenet_hfb_reg_readl(priv, HFB_CTRL); - reg &= ~(RBUF_HFB_EN | RBUF_ACPI_EN); - bcmgenet_hfb_reg_writel(priv, reg, HFB_CTRL); - /* Disable CRC Forward */ reg = bcmgenet_umac_readl(priv, UMAC_CMD); reg &= ~CMD_CRC_FWD; -- cgit v1.2.3 From 1a182e9c5f82fddf68c05ab00f0025f7613a64d3 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Tue, 9 Jun 2020 22:11:54 +0200 Subject: net: sched: export __netdev_watchdog_up() [ Upstream commit 1a3db27ad9a72d033235b9673653962c02e3486e ] Since the quiesce/activate rework, __netdev_watchdog_up() is directly called in the ucc_geth driver. Unfortunately, this function is not available for modules and thus ucc_geth cannot be built as a module anymore. Fix it by exporting __netdev_watchdog_up(). Since the commit introducing the regression was backported to stable branches, this one should ideally be as well. Fixes: 79dde73cf9bc ("net/ethernet/freescale: rework quiesce/activate for ucc_geth") Signed-off-by: Valentin Longchamp Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/sched/sch_generic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 8a4d01e427a2..119e20cad662 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -487,6 +487,7 @@ void __netdev_watchdog_up(struct net_device *dev) dev_hold(dev); } } +EXPORT_SYMBOL_GPL(__netdev_watchdog_up); static void dev_watchdog_up(struct net_device *dev) { -- cgit v1.2.3 From 934a8dab049c0b1cd3b25c30f66898b825bd5296 Mon Sep 17 00:00:00 2001 From: Yazen Ghannam Date: Thu, 28 Feb 2019 15:36:09 +0000 Subject: EDAC/amd64: Add Family 17h Model 30h PCI IDs [ Upstream commit 6e846239e5487cbb89ac8192d5f11437d010130e ] Add the new Family 17h Model 30h PCI IDs to the AMD64 EDAC module. This also fixes a probe failure that appeared when some other PCI IDs for Family 17h Model 30h were added to the AMD NB code. Fixes: be3518a16ef2 (x86/amd_nb: Add PCI device IDs for family 17h, model 30h) Signed-off-by: Yazen Ghannam Signed-off-by: Borislav Petkov Tested-by: Kim Phillips Cc: James Morse Cc: Mauro Carvalho Chehab Cc: linux-edac Link: https://lkml.kernel.org/r/20190228153558.127292-1-Yazen.Ghannam@amd.com Signed-off-by: Sasha Levin --- drivers/edac/amd64_edac.c | 13 +++++++++++++ drivers/edac/amd64_edac.h | 3 +++ 2 files changed, 16 insertions(+) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 05d6f9c86ac3..268ada29cd98 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2209,6 +2209,15 @@ static struct amd64_family_type family_types[] = { .dbam_to_cs = f17_base_addr_to_cs_size, } }, + [F17_M30H_CPUS] = { + .ctl_name = "F17h_M30h", + .f0_id = PCI_DEVICE_ID_AMD_17H_M30H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_17H_M30H_DF_F6, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_base_addr_to_cs_size, + } + }, }; /* @@ -3212,6 +3221,10 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt) fam_type = &family_types[F17_M10H_CPUS]; pvt->ops = &family_types[F17_M10H_CPUS].ops; break; + } else if (pvt->model >= 0x30 && pvt->model <= 0x3f) { + fam_type = &family_types[F17_M30H_CPUS]; + pvt->ops = &family_types[F17_M30H_CPUS].ops; + break; } fam_type = &family_types[F17_CPUS]; pvt->ops = &family_types[F17_CPUS].ops; diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 4242f8e39c18..de8dbb0b42b5 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -117,6 +117,8 @@ #define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F0 0x15e8 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F6 0x15ee +#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F0 0x1490 +#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F6 0x1496 /* * Function 1 - Address Map @@ -284,6 +286,7 @@ enum amd_families { F16_M30H_CPUS, F17_CPUS, F17_M10H_CPUS, + F17_M30H_CPUS, NUM_FAMILIES, }; -- cgit v1.2.3 From 4fb463566aab885a470bf05d80757893cec71d63 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 17 Dec 2018 15:16:52 +0100 Subject: i2c: tegra: Cleanup kerneldoc comments [ Upstream commit c990bbafdb11c608bba2d529f72ded9bdff88678 ] Some of the kerneldoc uses a strange spelling for abbreviations. Turn them into all-uppercase and clean up some whitespace issues while at it. Signed-off-by: Thierry Reding Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-tegra.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 47d196c026ba..9a6b9a1b88ae 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -145,8 +145,8 @@ enum msg_end_type { * @has_continue_xfer_support: Continue transfer supports. * @has_per_pkt_xfer_complete_irq: Has enable/disable capability for transfer * complete interrupt per packet basis. - * @has_single_clk_source: The i2c controller has single clock source. Tegra30 - * and earlier Socs has two clock sources i.e. div-clk and + * @has_single_clk_source: The I2C controller has single clock source. Tegra30 + * and earlier SoCs have two clock sources i.e. div-clk and * fast-clk. * @has_config_load_reg: Has the config load register to load the new * configuration. @@ -155,7 +155,6 @@ enum msg_end_type { * applicable if there is no fast clock source i.e. single clock * source. */ - struct tegra_i2c_hw_feature { bool has_continue_xfer_support; bool has_per_pkt_xfer_complete_irq; @@ -170,22 +169,22 @@ struct tegra_i2c_hw_feature { }; /** - * struct tegra_i2c_dev - per device i2c context + * struct tegra_i2c_dev - per device I2C context * @dev: device reference for power management - * @hw: Tegra i2c hw feature. - * @adapter: core i2c layer adapter information - * @div_clk: clock reference for div clock of i2c controller. - * @fast_clk: clock reference for fast clock of i2c controller. + * @hw: Tegra I2C HW feature + * @adapter: core I2C layer adapter information + * @div_clk: clock reference for div clock of I2C controller + * @fast_clk: clock reference for fast clock of I2C controller * @base: ioremapped registers cookie - * @cont_id: i2c controller id, used for for packet header - * @irq: irq number of transfer complete interrupt - * @is_dvc: identifies the DVC i2c controller, has a different register layout + * @cont_id: I2C controller ID, used for packet header + * @irq: IRQ number of transfer complete interrupt + * @is_dvc: identifies the DVC I2C controller, has a different register layout * @msg_complete: transfer completion notifier * @msg_err: error code for completed message * @msg_buf: pointer to current message data * @msg_buf_remaining: size of unsent data in the message buffer * @msg_read: identifies read transfers - * @bus_clk_rate: current i2c bus clock rate + * @bus_clk_rate: current I2C bus clock rate */ struct tegra_i2c_dev { struct device *dev; -- cgit v1.2.3 From 5301f6fb85810871acdb22ea397029e8b1fedf75 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 17 Dec 2018 15:16:53 +0100 Subject: i2c: tegra: Add missing kerneldoc for some fields [ Upstream commit 0604ee4aefa20f493a32dc223599f922fb615367 ] Not all fields were properly documented. Add kerneldoc for the missing fields to prevent the build from flagging them. Reported-by: Wolfram Sang Signed-off-by: Thierry Reding Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-tegra.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 9a6b9a1b88ae..917f416787b1 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -154,6 +154,16 @@ enum msg_end_type { * @clk_divisor_std_fast_mode: Clock divisor in standard/fast mode. It is * applicable if there is no fast clock source i.e. single clock * source. + * @clk_divisor_fast_plus_mode: Clock divisor in fast mode plus. It is + * applicable if there is no fast clock source (i.e. single + * clock source). + * @has_multi_master_mode: The I2C controller supports running in single-master + * or multi-master mode. + * @has_slcg_override_reg: The I2C controller supports a register that + * overrides the second level clock gating. + * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that + * provides additional features and allows for longer messages to + * be transferred in one go. */ struct tegra_i2c_hw_feature { bool has_continue_xfer_support; @@ -175,9 +185,11 @@ struct tegra_i2c_hw_feature { * @adapter: core I2C layer adapter information * @div_clk: clock reference for div clock of I2C controller * @fast_clk: clock reference for fast clock of I2C controller + * @rst: reset control for the I2C controller * @base: ioremapped registers cookie * @cont_id: I2C controller ID, used for packet header * @irq: IRQ number of transfer complete interrupt + * @irq_disabled: used to track whether or not the interrupt is enabled * @is_dvc: identifies the DVC I2C controller, has a different register layout * @msg_complete: transfer completion notifier * @msg_err: error code for completed message @@ -185,6 +197,9 @@ struct tegra_i2c_hw_feature { * @msg_buf_remaining: size of unsent data in the message buffer * @msg_read: identifies read transfers * @bus_clk_rate: current I2C bus clock rate + * @clk_divisor_non_hs_mode: clock divider for non-high-speed modes + * @is_multimaster_mode: track if I2C controller is in multi-master mode + * @xfer_lock: lock to serialize transfer submission and processing */ struct tegra_i2c_dev { struct device *dev; -- cgit v1.2.3 From 0479fd1de51fe2d3e948f02e6145be6c213ea79b Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Tue, 8 Jan 2019 13:59:10 -0800 Subject: i2c: tegra: Fix Maximum transfer size [ Upstream commit b67d4530cdade7ebfafa2c6b46f2a0dad3e41bcb ] Tegra194 supports maximum 64K Bytes transfer per packet. Tegra186 and prior supports maximum 4K Bytes transfer per packet. This patch fixes this payload difference between Tegra194 and prior Tegra chipsets using separate i2c_adapter_quirks. Signed-off-by: Sowjanya Komatineni Acked-by: Thierry Reding Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-tegra.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 917f416787b1..af06198851f1 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -164,6 +164,8 @@ enum msg_end_type { * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that * provides additional features and allows for longer messages to * be transferred in one go. + * @quirks: i2c adapter quirks for limiting write/read transfer size and not + * allowing 0 length transfers. */ struct tegra_i2c_hw_feature { bool has_continue_xfer_support; @@ -176,6 +178,7 @@ struct tegra_i2c_hw_feature { bool has_multi_master_mode; bool has_slcg_override_reg; bool has_mst_fifo; + const struct i2c_adapter_quirks *quirks; }; /** @@ -847,6 +850,10 @@ static const struct i2c_adapter_quirks tegra_i2c_quirks = { .max_write_len = 4096 - 12, }; +static const struct i2c_adapter_quirks tegra194_i2c_quirks = { + .flags = I2C_AQ_NO_ZERO_LEN, +}; + static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .has_continue_xfer_support = false, .has_per_pkt_xfer_complete_irq = false, @@ -858,6 +865,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { @@ -871,6 +879,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { @@ -884,6 +893,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { @@ -897,6 +907,7 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra210_i2c_hw = { @@ -910,6 +921,7 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = { .has_multi_master_mode = true, .has_slcg_override_reg = true, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra194_i2c_hw = { @@ -923,6 +935,7 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = { .has_multi_master_mode = true, .has_slcg_override_reg = true, .has_mst_fifo = true, + .quirks = &tegra194_i2c_quirks, }; /* Match table for of_platform binding */ @@ -974,7 +987,6 @@ static int tegra_i2c_probe(struct platform_device *pdev) i2c_dev->base = base; i2c_dev->div_clk = div_clk; i2c_dev->adapter.algo = &tegra_i2c_algo; - i2c_dev->adapter.quirks = &tegra_i2c_quirks; i2c_dev->irq = irq; i2c_dev->cont_id = pdev->id; i2c_dev->dev = &pdev->dev; @@ -990,6 +1002,7 @@ static int tegra_i2c_probe(struct platform_device *pdev) i2c_dev->hw = of_device_get_match_data(&pdev->dev); i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node, "nvidia,tegra20-i2c-dvc"); + i2c_dev->adapter.quirks = i2c_dev->hw->quirks; init_completion(&i2c_dev->msg_complete); spin_lock_init(&i2c_dev->xfer_lock); -- cgit v1.2.3 From 7c68b649b37fa4e6135cc6dc4dc3545c5b7d018e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 6 Jun 2020 23:44:24 -0400 Subject: fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()" [ Upstream commit 9d964e1b82d8182184153b70174f445ea616f053 ] lost npc in PTRACE_SETREGSET, breaking PTRACE_SETREGS as well Fixes: cf51e129b968 "sparc32: fix register window handling in genregs32_[gs]et()" Signed-off-by: Al Viro Signed-off-by: Sasha Levin --- arch/sparc/kernel/ptrace_32.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/ptrace_32.c b/arch/sparc/kernel/ptrace_32.c index 60f7205ebe40..646dd58169ec 100644 --- a/arch/sparc/kernel/ptrace_32.c +++ b/arch/sparc/kernel/ptrace_32.c @@ -168,12 +168,17 @@ static int genregs32_set(struct task_struct *target, if (ret || !count) return ret; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - ®s->y, + ®s->npc, 34 * sizeof(u32), 35 * sizeof(u32)); if (ret || !count) return ret; + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + ®s->y, + 35 * sizeof(u32), 36 * sizeof(u32)); + if (ret || !count) + return ret; return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, - 35 * sizeof(u32), 38 * sizeof(u32)); + 36 * sizeof(u32), 38 * sizeof(u32)); } static int fpregs32_get(struct task_struct *target, -- cgit v1.2.3 From 6a5d041711f29c807fef0b133356bb74f5e8e9a2 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Fri, 26 Jun 2020 23:41:55 -0400 Subject: ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294 [ Upstream commit 8b33a134a9cc2a501f8fc731d91caef39237d495 ] A headset on the laptop like ASUS B9450FA does not work, until quirk ALC294_FIXUP_ASUS_HPE is applied. Signed-off-by: Jian-Hong Pan Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/20200225072920.109199-1-jian-hong@endlessm.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/patch_realtek.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 623ebe2e7db4..9847be4349e6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5747,7 +5747,7 @@ enum { ALC289_FIXUP_DUAL_SPK, ALC294_FIXUP_SPK2_TO_DAC1, ALC294_FIXUP_ASUS_DUAL_SPK, - + ALC294_FIXUP_ASUS_HPE, }; static const struct hda_fixup alc269_fixups[] = { @@ -6836,7 +6836,17 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC294_FIXUP_SPK2_TO_DAC1 }, - + [ALC294_FIXUP_ASUS_HPE] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + /* Set EAPD high */ + { 0x20, AC_VERB_SET_COEF_INDEX, 0x0f }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x7774 }, + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -6999,6 +7009,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK), SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC), + SND_PCI_QUIRK(0x1043, 0x19ce, "ASUS B9450FA", ALC294_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), -- cgit v1.2.3 From 2a3e71fa1654a2fc976720fd448520900ba26acb Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 27 Mar 2020 12:46:25 +0800 Subject: ALSA: hda/realtek: Enable mute LED on an HP system [ Upstream commit f5a88b0accc24c4a9021247d7a3124f90aa4c586 ] The system in question uses ALC285, and it uses GPIO 0x04 to control its mute LED. The mic mute LED can be controlled by GPIO 0x01, however the system uses DMIC so we should use that to control mic mute LED. Signed-off-by: Kai-Heng Feng Cc: Link: https://lore.kernel.org/r/20200327044626.29582-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/patch_realtek.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9847be4349e6..3103f990299c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3918,6 +3918,12 @@ static void alc269_fixup_hp_gpio_led(struct hda_codec *codec, alc_fixup_hp_gpio_led(codec, action, 0x08, 0x10); } +static void alc285_fixup_hp_gpio_led(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + alc_fixup_hp_gpio_led(codec, action, 0x04, 0x00); +} + static void alc286_fixup_hp_gpio_led(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -5748,6 +5754,7 @@ enum { ALC294_FIXUP_SPK2_TO_DAC1, ALC294_FIXUP_ASUS_DUAL_SPK, ALC294_FIXUP_ASUS_HPE, + ALC285_FIXUP_HP_GPIO_LED, }; static const struct hda_fixup alc269_fixups[] = { @@ -6847,6 +6854,10 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC }, + [ALC285_FIXUP_HP_GPIO_LED] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc285_fixup_hp_gpio_led, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -6991,6 +7002,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3), + SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), -- cgit v1.2.3 From 0255fb2f1a1248a81b7e65df4039a9b01b9345e9 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Thu, 30 Apr 2020 16:32:52 +0800 Subject: ALSA: hda/realtek - Enable micmute LED on and HP system [ Upstream commit 3e0650ab26e2010ee312311612e40e076ed1feca ] Though the system uses DMIC, headset mic still uses the HDA, let's use GPIO 0x1 to control the micmute LED. The micmute LED GPIO has a different polarity to the mute LED GPIO, we can use the newly added micmute_led_polarity to indicate that. Signed-off-by: Kai-Heng Feng Link: https://lore.kernel.org/r/20200430083255.5093-2-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/patch_realtek.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3103f990299c..54887a87bddb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3921,7 +3921,11 @@ static void alc269_fixup_hp_gpio_led(struct hda_codec *codec, static void alc285_fixup_hp_gpio_led(struct hda_codec *codec, const struct hda_fixup *fix, int action) { - alc_fixup_hp_gpio_led(codec, action, 0x04, 0x00); + struct alc_spec *spec = codec->spec; + + spec->micmute_led_polarity = 1; + + alc_fixup_hp_gpio_led(codec, action, 0x04, 0x01); } static void alc286_fixup_hp_gpio_led(struct hda_codec *codec, -- cgit v1.2.3 From 3f9a54ce49147268c6f5be1c00fb08e9a08f01cc Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Sat, 29 Sep 2018 03:49:26 +0200 Subject: apparmor: don't try to replace stale label in ptraceme check [ Upstream commit ca3fde5214e1d24f78269b337d3f22afd6bf445e ] begin_current_label_crit_section() must run in sleepable context because when label_is_stale() is true, aa_replace_current_label() runs, which uses prepare_creds(), which can sleep. Until now, the ptraceme access check (which runs with tasklist_lock held) violated this rule. Fixes: b2d09ae449ced ("apparmor: move ptrace checks to using labels") Reported-by: Cyrill Gorcunov Reported-by: kernel test robot Signed-off-by: Jann Horn Signed-off-by: John Johansen Signed-off-by: Sasha Levin --- security/apparmor/lsm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c index 5e32fe434140..898752b818dc 100644 --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -130,11 +130,11 @@ static int apparmor_ptrace_traceme(struct task_struct *parent) struct aa_label *tracer, *tracee; int error; - tracee = begin_current_label_crit_section(); + tracee = __begin_current_label_crit_section(); tracer = aa_get_task_label(parent); error = aa_may_ptrace(tracer, tracee, AA_PTRACE_TRACE); aa_put_label(tracer); - end_current_label_crit_section(tracee); + __end_current_label_crit_section(tracee); return error; } -- cgit v1.2.3 From 8a92f0021cf856fdd159e9b10c33152f6e37d7a5 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Thu, 18 Jun 2020 10:43:46 -0500 Subject: ibmveth: Fix max MTU limit [ Upstream commit 5948378b26d89f8aa5eac37629dbd0616ce8d7a7 ] The max MTU limit defined for ibmveth is not accounting for virtual ethernet buffer overhead, which is twenty-two additional bytes set aside for the ethernet header and eight additional bytes of an opaque handle reserved for use by the hypervisor. Update the max MTU to reflect this overhead. Fixes: d894be57ca92 ("ethernet: use net core MTU range checking in more drivers") Fixes: 110447f8269a ("ethernet: fix min/max MTU typos") Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/ibm/ibmveth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index 40ad1e503255..e2f6670d6eaf 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -1695,7 +1695,7 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id) } netdev->min_mtu = IBMVETH_MIN_MTU; - netdev->max_mtu = ETH_MAX_MTU; + netdev->max_mtu = ETH_MAX_MTU - IBMVETH_BUFF_OH; memcpy(netdev->dev_addr, mac_addr_p, ETH_ALEN); -- cgit v1.2.3 From cf418c02c7dd82f34f324fced663dc5fe3283322 Mon Sep 17 00:00:00 2001 From: Wang Hai Date: Thu, 11 Jun 2020 15:57:50 +0800 Subject: mld: fix memory leak in ipv6_mc_destroy_dev() [ Upstream commit ea2fce88d2fd678ed9d45354ff49b73f1d5615dd ] Commit a84d01647989 ("mld: fix memory leak in mld_del_delrec()") fixed the memory leak of MLD, but missing the ipv6_mc_destroy_dev() path, in which mca_sources are leaked after ma_put(). Using ip6_mc_clear_src() to take care of the missing free. BUG: memory leak unreferenced object 0xffff8881113d3180 (size 64): comm "syz-executor071", pid 389, jiffies 4294887985 (age 17.943s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff 02 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002cbc483c>] kmalloc include/linux/slab.h:555 [inline] [<000000002cbc483c>] kzalloc include/linux/slab.h:669 [inline] [<000000002cbc483c>] ip6_mc_add1_src net/ipv6/mcast.c:2237 [inline] [<000000002cbc483c>] ip6_mc_add_src+0x7f5/0xbb0 net/ipv6/mcast.c:2357 [<0000000058b8b1ff>] ip6_mc_source+0xe0c/0x1530 net/ipv6/mcast.c:449 [<000000000bfc4fb5>] do_ipv6_setsockopt.isra.12+0x1b2c/0x3b30 net/ipv6/ipv6_sockglue.c:754 [<00000000e4e7a722>] ipv6_setsockopt+0xda/0x150 net/ipv6/ipv6_sockglue.c:950 [<0000000029260d9a>] rawv6_setsockopt+0x45/0x100 net/ipv6/raw.c:1081 [<000000005c1b46f9>] __sys_setsockopt+0x131/0x210 net/socket.c:2132 [<000000008491f7db>] __do_sys_setsockopt net/socket.c:2148 [inline] [<000000008491f7db>] __se_sys_setsockopt net/socket.c:2145 [inline] [<000000008491f7db>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2145 [<00000000c7bc11c5>] do_syscall_64+0xa1/0x530 arch/x86/entry/common.c:295 [<000000005fb7a3f3>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Reported-by: Hulk Robot Signed-off-by: Wang Hai Acked-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv6/mcast.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 2d80e913b82f..f2f8551416c3 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -2620,6 +2620,7 @@ void ipv6_mc_destroy_dev(struct inet6_dev *idev) idev->mc_list = i->next; write_unlock_bh(&idev->lock); + ip6_mc_clear_src(i); ma_put(i); write_lock_bh(&idev->lock); } -- cgit v1.2.3 From 13378a1d5b8b5cb06ac8bad0fc127849350761fd Mon Sep 17 00:00:00 2001 From: Thomas Martitz Date: Thu, 25 Jun 2020 14:26:03 +0200 Subject: net: bridge: enfore alignment for ethernet address [ Upstream commit db7202dec92e6caa2706c21d6fc359af318bde2e ] The eth_addr member is passed to ether_addr functions that require 2-byte alignment, therefore the member must be properly aligned to avoid unaligned accesses. The problem is in place since the initial merge of multicast to unicast: commit 6db6f0eae6052b70885562e1733896647ec1d807 bridge: multicast to unicast Fixes: 6db6f0eae605 ("bridge: multicast to unicast") Cc: Roopa Prabhu Cc: Nikolay Aleksandrov Cc: David S. Miller Cc: Jakub Kicinski Cc: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: Thomas Martitz Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/bridge/br_private.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 11ed2029985f..33b8222db75c 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -202,8 +202,8 @@ struct net_bridge_port_group { struct rcu_head rcu; struct timer_list timer; struct br_ip addr; + unsigned char eth_addr[ETH_ALEN] __aligned(2); unsigned char flags; - unsigned char eth_addr[ETH_ALEN]; }; struct net_bridge_mdb_entry -- cgit v1.2.3 From 061abde39541d563fbaa2154b83dc272b910b31d Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Tue, 16 Jun 2020 09:39:21 +0000 Subject: net: fix memleak in register_netdevice() [ Upstream commit 814152a89ed52c722ab92e9fbabcac3cb8a39245 ] I got a memleak report when doing some fuzz test: unreferenced object 0xffff888112584000 (size 13599): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00 tap0............ 00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002f60ba65>] __kmalloc_node+0x309/0x3a0 [<0000000075b211ec>] kvmalloc_node+0x7f/0xc0 [<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0 [<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888111845cc0 (size 8): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 8 bytes): 74 61 70 30 00 88 ff ff tap0.... backtrace: [<000000004c159777>] kstrdup+0x35/0x70 [<00000000d8b496ad>] kstrdup_const+0x3d/0x50 [<00000000494e884a>] kvasprintf_const+0xf1/0x180 [<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140 [<000000008fbdfc7b>] dev_set_name+0xab/0xe0 [<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff88811886d800 (size 512): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff .........f=..... backtrace: [<0000000050315800>] device_add+0x61e/0x1950 [<0000000021008dfb>] netdev_register_kobject+0x17e/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If call_netdevice_notifiers() failed, then rollback_registered() calls netdev_unregister_kobject() which holds the kobject. The reference cannot be put because the netdev won't be add to todo list, so it will leads a memleak, we need put the reference to avoid memleak. Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/core/dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index 1618d5a676c4..5e668d3b1e71 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -8753,6 +8753,13 @@ int register_netdevice(struct net_device *dev) rcu_barrier(); dev->reg_state = NETREG_UNREGISTERED; + /* We should put the kobject that hold in + * netdev_unregister_kobject(), otherwise + * the net device cannot be freed when + * driver calls free_netdev(), because the + * kobject is being hold. + */ + kobject_put(&dev->dev.kobj); } /* * Prevent userspace races by waiting until the network -- cgit v1.2.3 From edbe653223915b1deee0c4df909d5da924650cec Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 1 Apr 2019 16:42:13 +0200 Subject: net: place xmit recursion in softnet data commit 97cdcf37b57e3f204be3000b9eab9686f38b4356 upstream. This fills a hole in softnet data, so no change in structure size. Also prepares for xmit_more placement in the same spot; skb->xmit_more will be removed in followup patch. Signed-off-by: Florian Westphal Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- include/linux/netdevice.h | 40 ++++++++++++++++++++++++++++++++-------- net/core/dev.c | 10 +++------- net/core/filter.c | 6 +++--- 3 files changed, 38 insertions(+), 18 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 84bbdcbb199a..41beebcc61f4 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2620,14 +2620,6 @@ void netdev_freemem(struct net_device *dev); void synchronize_net(void); int init_dummy_netdev(struct net_device *dev); -DECLARE_PER_CPU(int, xmit_recursion); -#define XMIT_RECURSION_LIMIT 10 - -static inline int dev_recursion_level(void) -{ - return this_cpu_read(xmit_recursion); -} - struct net_device *dev_get_by_index(struct net *net, int ifindex); struct net_device *__dev_get_by_index(struct net *net, int ifindex); struct net_device *dev_get_by_index_rcu(struct net *net, int ifindex); @@ -2967,6 +2959,11 @@ struct softnet_data { #ifdef CONFIG_XFRM_OFFLOAD struct sk_buff_head xfrm_backlog; #endif + /* written and read only by owning cpu: */ + struct { + u16 recursion; + u8 more; + } xmit; #ifdef CONFIG_RPS /* input_queue_head should be written by cpu owning this struct, * and only read by other cpus. Worth using a cache line. @@ -3002,6 +2999,28 @@ static inline void input_queue_tail_incr_save(struct softnet_data *sd, DECLARE_PER_CPU_ALIGNED(struct softnet_data, softnet_data); +static inline int dev_recursion_level(void) +{ + return __this_cpu_read(softnet_data.xmit.recursion); +} + +#define XMIT_RECURSION_LIMIT 10 +static inline bool dev_xmit_recursion(void) +{ + return unlikely(__this_cpu_read(softnet_data.xmit.recursion) > + XMIT_RECURSION_LIMIT); +} + +static inline void dev_xmit_recursion_inc(void) +{ + __this_cpu_inc(softnet_data.xmit.recursion); +} + +static inline void dev_xmit_recursion_dec(void) +{ + __this_cpu_dec(softnet_data.xmit.recursion); +} + void __netif_schedule(struct Qdisc *q); void netif_schedule_queue(struct netdev_queue *txq); @@ -4314,6 +4333,11 @@ static inline netdev_tx_t __netdev_start_xmit(const struct net_device_ops *ops, return ops->ndo_start_xmit(skb, dev); } +static inline bool netdev_xmit_more(void) +{ + return __this_cpu_read(softnet_data.xmit.more); +} + static inline netdev_tx_t netdev_start_xmit(struct sk_buff *skb, struct net_device *dev, struct netdev_queue *txq, bool more) { diff --git a/net/core/dev.c b/net/core/dev.c index 5e668d3b1e71..8f9a8b009a23 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3534,9 +3534,6 @@ static void skb_update_prio(struct sk_buff *skb) #define skb_update_prio(skb) #endif -DEFINE_PER_CPU(int, xmit_recursion); -EXPORT_SYMBOL(xmit_recursion); - /** * dev_loopback_xmit - loop back @skb * @net: network namespace this loopback is happening in @@ -3827,8 +3824,7 @@ static int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev) int cpu = smp_processor_id(); /* ok because BHs are off */ if (txq->xmit_lock_owner != cpu) { - if (unlikely(__this_cpu_read(xmit_recursion) > - XMIT_RECURSION_LIMIT)) + if (dev_xmit_recursion()) goto recursion_alert; skb = validate_xmit_skb(skb, dev, &again); @@ -3838,9 +3834,9 @@ static int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev) HARD_TX_LOCK(dev, txq, cpu); if (!netif_xmit_stopped(txq)) { - __this_cpu_inc(xmit_recursion); + dev_xmit_recursion_inc(); skb = dev_hard_start_xmit(skb, dev, txq, &rc); - __this_cpu_dec(xmit_recursion); + dev_xmit_recursion_dec(); if (dev_xmit_complete(rc)) { HARD_TX_UNLOCK(dev, txq); goto out; diff --git a/net/core/filter.c b/net/core/filter.c index b5521b60a2d4..636e67a92847 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2002,7 +2002,7 @@ static inline int __bpf_tx_skb(struct net_device *dev, struct sk_buff *skb) { int ret; - if (unlikely(__this_cpu_read(xmit_recursion) > XMIT_RECURSION_LIMIT)) { + if (dev_xmit_recursion()) { net_crit_ratelimited("bpf: recursion limit reached on datapath, buggy bpf program?\n"); kfree_skb(skb); return -ENETDOWN; @@ -2011,9 +2011,9 @@ static inline int __bpf_tx_skb(struct net_device *dev, struct sk_buff *skb) skb->dev = dev; skb->tstamp = 0; - __this_cpu_inc(xmit_recursion); + dev_xmit_recursion_inc(); ret = dev_queue_xmit(skb); - __this_cpu_dec(xmit_recursion); + dev_xmit_recursion_dec(); return ret; } -- cgit v1.2.3 From 3a708efa69237c687ee1bd6a7014b2130db90776 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 3 Apr 2019 08:28:35 +0200 Subject: net: use correct this_cpu primitive in dev_recursion_level commit 28b05b92886871bdd8e6a9df73e3a15845fe8ef4 upstream. syzbot reports: BUG: using __this_cpu_read() in preemptible code: caller is dev_recursion_level include/linux/netdevice.h:3052 [inline] __this_cpu_preempt_check+0x246/0x270 lib/smp_processor_id.c:47 dev_recursion_level include/linux/netdevice.h:3052 [inline] ip6_skb_dst_mtu include/net/ip6_route.h:245 [inline] I erronously downgraded a this_cpu_read to __this_cpu_read when moving dev_recursion_level() around. Reported-by: syzbot+51471b4aae195285a4a3@syzkaller.appspotmail.com Fixes: 97cdcf37b57e ("net: place xmit recursion in softnet data") Signed-off-by: Florian Westphal Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 41beebcc61f4..85dc3497c74f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3001,7 +3001,7 @@ DECLARE_PER_CPU_ALIGNED(struct softnet_data, softnet_data); static inline int dev_recursion_level(void) { - return __this_cpu_read(softnet_data.xmit.recursion); + return this_cpu_read(softnet_data.xmit.recursion); } #define XMIT_RECURSION_LIMIT 10 -- cgit v1.2.3 From 220e80d93733969e2d836f37467175ea7277b8f3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 17 Jun 2020 22:23:25 -0700 Subject: net: increment xmit_recursion level in dev_direct_xmit() [ Upstream commit 0ad6f6e767ec2f613418cbc7ebe5ec4c35af540c ] Back in commit f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack") Hannes added code so that IPv6 stack would not trust skb->sk for typical cases where packet goes through 'standard' xmit path (__dev_queue_xmit()) Alas af_packet had a dev_direct_xmit() path that was not dealing yet with xmit_recursion level. Also change sk_mc_loop() to dump a stack once only. Without this patch, syzbot was able to trigger : [1] [ 153.567378] WARNING: CPU: 7 PID: 11273 at net/core/sock.c:721 sk_mc_loop+0x51/0x70 [ 153.567378] Modules linked in: nfnetlink ip6table_raw ip6table_filter iptable_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 iptable_filter macsec macvtap tap macvlan 8021q hsr wireguard libblake2s blake2s_x86_64 libblake2s_generic udp_tunnel ip6_udp_tunnel libchacha20poly1305 poly1305_x86_64 chacha_x86_64 libchacha curve25519_x86_64 libcurve25519_generic netdevsim batman_adv dummy team bridge stp llc w1_therm wire i2c_mux_pca954x i2c_mux cdc_acm ehci_pci ehci_hcd mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [ 153.567386] CPU: 7 PID: 11273 Comm: b159172088 Not tainted 5.8.0-smp-DEV #273 [ 153.567387] RIP: 0010:sk_mc_loop+0x51/0x70 [ 153.567388] Code: 66 83 f8 0a 75 24 0f b6 4f 12 b8 01 00 00 00 31 d2 d3 e0 a9 bf ef ff ff 74 07 48 8b 97 f0 02 00 00 0f b6 42 3a 83 e0 01 5d c3 <0f> 0b b8 01 00 00 00 5d c3 0f b6 87 18 03 00 00 5d c0 e8 04 83 e0 [ 153.567388] RSP: 0018:ffff95c69bb93990 EFLAGS: 00010212 [ 153.567388] RAX: 0000000000000011 RBX: ffff95c6e0ee3e00 RCX: 0000000000000007 [ 153.567389] RDX: ffff95c69ae50000 RSI: ffff95c6c30c3000 RDI: ffff95c6c30c3000 [ 153.567389] RBP: ffff95c69bb93990 R08: ffff95c69a77f000 R09: 0000000000000008 [ 153.567389] R10: 0000000000000040 R11: 00003e0e00026128 R12: ffff95c6c30c3000 [ 153.567390] R13: ffff95c6cc4fd500 R14: ffff95c6f84500c0 R15: ffff95c69aa13c00 [ 153.567390] FS: 00007fdc3a283700(0000) GS:ffff95c6ff9c0000(0000) knlGS:0000000000000000 [ 153.567390] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 153.567391] CR2: 00007ffee758e890 CR3: 0000001f9ba20003 CR4: 00000000001606e0 [ 153.567391] Call Trace: [ 153.567391] ip6_finish_output2+0x34e/0x550 [ 153.567391] __ip6_finish_output+0xe7/0x110 [ 153.567391] ip6_finish_output+0x2d/0xb0 [ 153.567392] ip6_output+0x77/0x120 [ 153.567392] ? __ip6_finish_output+0x110/0x110 [ 153.567392] ip6_local_out+0x3d/0x50 [ 153.567392] ipvlan_queue_xmit+0x56c/0x5e0 [ 153.567393] ? ksize+0x19/0x30 [ 153.567393] ipvlan_start_xmit+0x18/0x50 [ 153.567393] dev_direct_xmit+0xf3/0x1c0 [ 153.567393] packet_direct_xmit+0x69/0xa0 [ 153.567394] packet_sendmsg+0xbf0/0x19b0 [ 153.567394] ? plist_del+0x62/0xb0 [ 153.567394] sock_sendmsg+0x65/0x70 [ 153.567394] sock_write_iter+0x93/0xf0 [ 153.567394] new_sync_write+0x18e/0x1a0 [ 153.567395] __vfs_write+0x29/0x40 [ 153.567395] vfs_write+0xb9/0x1b0 [ 153.567395] ksys_write+0xb1/0xe0 [ 153.567395] __x64_sys_write+0x1a/0x20 [ 153.567395] do_syscall_64+0x43/0x70 [ 153.567396] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 153.567396] RIP: 0033:0x453549 [ 153.567396] Code: Bad RIP value. [ 153.567396] RSP: 002b:00007fdc3a282cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 153.567397] RAX: ffffffffffffffda RBX: 00000000004d32d0 RCX: 0000000000453549 [ 153.567397] RDX: 0000000000000020 RSI: 0000000020000300 RDI: 0000000000000003 [ 153.567398] RBP: 00000000004d32d8 R08: 0000000000000000 R09: 0000000000000000 [ 153.567398] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d32dc [ 153.567398] R13: 00007ffee742260f R14: 00007fdc3a282dc0 R15: 00007fdc3a283700 [ 153.567399] ---[ end trace c1d5ae2b1059ec62 ]--- f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/core/dev.c | 2 ++ net/core/sock.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 8f9a8b009a23..4b1053057ca6 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3899,10 +3899,12 @@ int dev_direct_xmit(struct sk_buff *skb, u16 queue_id) local_bh_disable(); + dev_xmit_recursion_inc(); HARD_TX_LOCK(dev, txq, smp_processor_id()); if (!netif_xmit_frozen_or_drv_stopped(txq)) ret = netdev_start_xmit(skb, dev, txq, false); HARD_TX_UNLOCK(dev, txq); + dev_xmit_recursion_dec(); local_bh_enable(); diff --git a/net/core/sock.c b/net/core/sock.c index 8abfde0d28ee..b11d116383da 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -640,7 +640,7 @@ bool sk_mc_loop(struct sock *sk) return inet6_sk(sk)->mc_loop; #endif } - WARN_ON(1); + WARN_ON_ONCE(1); return true; } EXPORT_SYMBOL(sk_mc_loop); -- cgit v1.2.3 From c191f7cf369c0090fdbeff0b6782d5eaa3a179d2 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 15 Jun 2020 10:54:56 +0800 Subject: net: usb: ax88179_178a: fix packet alignment padding [ Upstream commit e869e7a17798d85829fa7d4f9bbe1eebd4b2d3f6 ] Using a AX88179 device (0b95:1790), I see two bytes of appended data on every RX packet. For example, this 48-byte ping, using 0xff as a payload byte: 04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64 0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500 0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8 0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000 0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff 0x0040: ffff ffff ffff ffff ffff ffff ffff ffff 0x0050: ffff ffff ffff ffff ffff ffff ffff ffff 0x0060: ffff 961f Those last two bytes - 96 1f - aren't part of the original packet. In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte 'alignment pseudo header' from the start of the packet, and sets the length from a per-packet field populated by hardware. It looks like that length field *includes* the 2-byte header; the current driver assumes that it's excluded. This change trims the 2-byte alignment header after we've set the packet length, so the resulting packet length is correct. While we're moving the comment around, this also fixes the spelling of 'pseudo'. Signed-off-by: Jeremy Kerr Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/ax88179_178a.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 2207f7a7d1ff..8455f72007b9 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1400,10 +1400,10 @@ static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } if (pkt_cnt == 0) { - /* Skip IP alignment psudo header */ - skb_pull(skb, 2); skb->len = pkt_len; - skb_set_tail_pointer(skb, pkt_len); + /* Skip IP alignment pseudo header */ + skb_pull(skb, 2); + skb_set_tail_pointer(skb, skb->len); skb->truesize = pkt_len + sizeof(struct sk_buff); ax88179_rx_checksum(skb, pkt_hdr); return 1; @@ -1412,8 +1412,9 @@ static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb) ax_skb = skb_clone(skb, GFP_ATOMIC); if (ax_skb) { ax_skb->len = pkt_len; - ax_skb->data = skb->data + 2; - skb_set_tail_pointer(ax_skb, pkt_len); + /* Skip IP alignment pseudo header */ + skb_pull(ax_skb, 2); + skb_set_tail_pointer(ax_skb, ax_skb->len); ax_skb->truesize = pkt_len + sizeof(struct sk_buff); ax88179_rx_checksum(ax_skb, pkt_hdr); usbnet_skb_return(dev, ax_skb); -- cgit v1.2.3 From 3de8d3851137a57015c82790cf98ce325443f884 Mon Sep 17 00:00:00 2001 From: Aditya Pakki Date: Fri, 12 Jun 2020 15:27:55 -0500 Subject: rocker: fix incorrect error handling in dma_rings_init [ Upstream commit 58d0c864e1a759a15c9df78f50ea5a5c32b3989e ] In rocker_dma_rings_init, the goto blocks in case of errors caused by the functions rocker_dma_cmd_ring_waits_alloc() and rocker_dma_ring_create() are incorrect. The patch fixes the order consistent with cleanup in rocker_dma_rings_fini(). Signed-off-by: Aditya Pakki Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/rocker/rocker_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/rocker/rocker_main.c b/drivers/net/ethernet/rocker/rocker_main.c index aeafdb9ac015..b13ab4eee4c7 100644 --- a/drivers/net/ethernet/rocker/rocker_main.c +++ b/drivers/net/ethernet/rocker/rocker_main.c @@ -651,10 +651,10 @@ static int rocker_dma_rings_init(struct rocker *rocker) err_dma_event_ring_bufs_alloc: rocker_dma_ring_destroy(rocker, &rocker->event_ring); err_dma_event_ring_create: + rocker_dma_cmd_ring_waits_free(rocker); +err_dma_cmd_ring_waits_alloc: rocker_dma_ring_bufs_free(rocker, &rocker->cmd_ring, PCI_DMA_BIDIRECTIONAL); -err_dma_cmd_ring_waits_alloc: - rocker_dma_cmd_ring_waits_free(rocker); err_dma_cmd_ring_bufs_alloc: rocker_dma_ring_destroy(rocker, &rocker->cmd_ring); return err; -- cgit v1.2.3 From a3bc2b29389eb18835d1475c129a113220921ca6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 19 Jun 2020 23:38:16 +0100 Subject: rxrpc: Fix notification call on completion of discarded calls [ Upstream commit 0041cd5a50442db6e456b145892a0eaf2dff061f ] When preallocated service calls are being discarded, they're passed to ->discard_new_call() to have the caller clean up any attached higher-layer preallocated pieces before being marked completed. However, the act of marking them completed now invokes the call's notification function - which causes a problem because that function might assume that the previously freed pieces of memory are still there. Fix this by setting a dummy notification function on the socket after calling ->discard_new_call(). This results in the following kasan message when the kafs module is removed. ================================================================== BUG: KASAN: use-after-free in afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707 Write of size 1 at addr ffff8880946c39e4 by task kworker/u4:1/21 CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.8.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x18f/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707 rxrpc_notify_socket+0x1db/0x5d0 net/rxrpc/recvmsg.c:40 __rxrpc_set_call_completion.part.0+0x172/0x410 net/rxrpc/recvmsg.c:76 __rxrpc_call_completed net/rxrpc/recvmsg.c:112 [inline] rxrpc_call_completed+0xca/0xf0 net/rxrpc/recvmsg.c:111 rxrpc_discard_prealloc+0x781/0xab0 net/rxrpc/call_accept.c:233 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603 process_one_work+0x965/0x1690 kernel/workqueue.c:2269 worker_thread+0x96/0xe10 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:291 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 6820: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:467 kmem_cache_alloc_trace+0x153/0x7d0 mm/slab.c:3551 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] afs_alloc_call+0x55/0x630 fs/afs/rxrpc.c:141 afs_charge_preallocation+0xe9/0x2d0 fs/afs/rxrpc.c:757 afs_open_socket+0x292/0x360 fs/afs/rxrpc.c:92 afs_net_init+0xa6c/0xe30 fs/afs/main.c:125 ops_init+0xaf/0x420 net/core/net_namespace.c:151 setup_net+0x2de/0x860 net/core/net_namespace.c:341 copy_net_ns+0x293/0x590 net/core/net_namespace.c:482 create_new_namespaces+0x3fb/0xb30 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xbd/0x1f0 kernel/nsproxy.c:231 ksys_unshare+0x43d/0x8e0 kernel/fork.c:2983 __do_sys_unshare kernel/fork.c:3051 [inline] __se_sys_unshare kernel/fork.c:3049 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3049 do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 21: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:455 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 afs_put_call+0x585/0xa40 fs/afs/rxrpc.c:190 rxrpc_discard_prealloc+0x764/0xab0 net/rxrpc/call_accept.c:230 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603 process_one_work+0x965/0x1690 kernel/workqueue.c:2269 worker_thread+0x96/0xe10 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:291 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff8880946c3800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 484 bytes inside of 1024-byte region [ffff8880946c3800, ffff8880946c3c00) The buggy address belongs to the page: page:ffffea000251b0c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002546508 ffffea00024fa248 ffff8880aa000c40 raw: 0000000000000000 ffff8880946c3000 0000000100000002 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880946c3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880946c3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880946c3980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880946c3a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880946c3a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: syzbot+d3eccef36ddbd02713e9@syzkaller.appspotmail.com Fixes: 5ac0d62226a0 ("rxrpc: Fix missing notification") Signed-off-by: David Howells Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/rxrpc/call_accept.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/rxrpc/call_accept.c b/net/rxrpc/call_accept.c index c5566bc4aaca..7778f0fb48cf 100644 --- a/net/rxrpc/call_accept.c +++ b/net/rxrpc/call_accept.c @@ -26,6 +26,11 @@ #include #include "ar-internal.h" +static void rxrpc_dummy_notify(struct sock *sk, struct rxrpc_call *call, + unsigned long user_call_ID) +{ +} + /* * Preallocate a single service call, connection and peer and, if possible, * give them a user ID and attach the user's side of the ID to them. @@ -232,6 +237,8 @@ void rxrpc_discard_prealloc(struct rxrpc_sock *rx) if (rx->discard_new_call) { _debug("discard %lx", call->user_call_ID); rx->discard_new_call(call, call->user_call_ID); + if (call->notify_rx) + call->notify_rx = rxrpc_dummy_notify; rxrpc_put_call(call, rxrpc_call_put_kernel); } rxrpc_call_completed(call); -- cgit v1.2.3 From 8a3839c7473037221f727634dcdfccf0d9099853 Mon Sep 17 00:00:00 2001 From: Marcelo Ricardo Leitner Date: Wed, 24 Jun 2020 17:34:18 -0300 Subject: sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket [ Upstream commit 471e39df96b9a4c4ba88a2da9e25a126624d7a9c ] If a socket is set ipv6only, it will still send IPv4 addresses in the INIT and INIT_ACK packets. This potentially misleads the peer into using them, which then would cause association termination. The fix is to not add IPv4 addresses to ipv6only sockets. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Corey Minyard Signed-off-by: Marcelo Ricardo Leitner Tested-by: Corey Minyard Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- include/net/sctp/constants.h | 8 +++++--- net/sctp/associola.c | 5 ++++- net/sctp/bind_addr.c | 1 + net/sctp/protocol.c | 3 ++- 4 files changed, 12 insertions(+), 5 deletions(-) diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h index 86f034b524d4..48d74674d5e9 100644 --- a/include/net/sctp/constants.h +++ b/include/net/sctp/constants.h @@ -361,11 +361,13 @@ enum { ipv4_is_anycast_6to4(a)) /* Flags used for the bind address copy functions. */ -#define SCTP_ADDR6_ALLOWED 0x00000001 /* IPv6 address is allowed by +#define SCTP_ADDR4_ALLOWED 0x00000001 /* IPv4 address is allowed by local sock family */ -#define SCTP_ADDR4_PEERSUPP 0x00000002 /* IPv4 address is supported by +#define SCTP_ADDR6_ALLOWED 0x00000002 /* IPv6 address is allowed by + local sock family */ +#define SCTP_ADDR4_PEERSUPP 0x00000004 /* IPv4 address is supported by peer */ -#define SCTP_ADDR6_PEERSUPP 0x00000004 /* IPv6 address is supported by +#define SCTP_ADDR6_PEERSUPP 0x00000008 /* IPv6 address is supported by peer */ /* Reasons to retransmit. */ diff --git a/net/sctp/associola.c b/net/sctp/associola.c index f68ccd1f4860..d17708800652 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -1593,12 +1593,15 @@ void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned int len) int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc, enum sctp_scope scope, gfp_t gfp) { + struct sock *sk = asoc->base.sk; int flags; /* Use scoping rules to determine the subset of addresses from * the endpoint. */ - flags = (PF_INET6 == asoc->base.sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0; + flags = (PF_INET6 == sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0; + if (!inet_v6_ipv6only(sk)) + flags |= SCTP_ADDR4_ALLOWED; if (asoc->peer.ipv4_address) flags |= SCTP_ADDR4_PEERSUPP; if (asoc->peer.ipv6_address) diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c index 7df3704982f5..38d01cfb313e 100644 --- a/net/sctp/bind_addr.c +++ b/net/sctp/bind_addr.c @@ -453,6 +453,7 @@ static int sctp_copy_one_addr(struct net *net, struct sctp_bind_addr *dest, * well as the remote peer. */ if ((((AF_INET == addr->sa.sa_family) && + (flags & SCTP_ADDR4_ALLOWED) && (flags & SCTP_ADDR4_PEERSUPP))) || (((AF_INET6 == addr->sa.sa_family) && (flags & SCTP_ADDR6_ALLOWED) && diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 787c59d798f4..af054f38341b 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -163,7 +163,8 @@ int sctp_copy_local_addr_list(struct net *net, struct sctp_bind_addr *bp, * sock as well as the remote peer. */ if (addr->a.sa.sa_family == AF_INET && - !(copy_flags & SCTP_ADDR4_PEERSUPP)) + (!(copy_flags & SCTP_ADDR4_ALLOWED) || + !(copy_flags & SCTP_ADDR4_PEERSUPP))) continue; if (addr->a.sa.sa_family == AF_INET6 && (!(copy_flags & SCTP_ADDR6_ALLOWED) || -- cgit v1.2.3 From a4f8b2682d5aee896b17ca617df8fbbdab9af38c Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Thu, 25 Jun 2020 14:51:06 +0300 Subject: tcp: don't ignore ECN CWR on pure ACK [ Upstream commit 2570284060b48f3f79d8f1a2698792f36c385e9a ] there is a problem with the CWR flag set in an incoming ACK segment and it leads to the situation when the ECE flag is latched forever the following packetdrill script shows what happens: // Stack receives incoming segments with CE set +0.1 <[ect0] . 11001:12001(1000) ack 1001 win 65535 +0.0 <[ce] . 12001:13001(1000) ack 1001 win 65535 +0.0 <[ect0] P. 13001:14001(1000) ack 1001 win 65535 // Stack repsonds with ECN ECHO +0.0 >[noecn] . 1001:1001(0) ack 12001 +0.0 >[noecn] E. 1001:1001(0) ack 13001 +0.0 >[noecn] E. 1001:1001(0) ack 14001 // Write a packet +0.1 write(3, ..., 1000) = 1000 +0.0 >[ect0] PE. 1001:2001(1000) ack 14001 // Pure ACK received +0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535 // Since CWR was sent, this packet should NOT have ECE set +0.1 write(3, ..., 1000) = 1000 +0.0 >[ect0] P. 2001:3001(1000) ack 14001 // but Linux will still keep ECE latched here, with packetdrill // flagging a missing ECE flag, expecting // >[ect0] PE. 2001:3001(1000) ack 14001 // in the script In the situation above we will continue to send ECN ECHO packets and trigger the peer to reduce the congestion window. To avoid that we can check CWR on pure ACKs received. v3: - Add a sequence check to avoid sending an ACK to an ACK v2: - Adjusted the comment - move CWR check before checking for unacknowledged packets Signed-off-by: Denis Kirjanov Acked-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv4/tcp_input.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 12e1ea7344d9..ee1b4804b40d 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -254,7 +254,8 @@ static void tcp_ecn_accept_cwr(struct sock *sk, const struct sk_buff *skb) * cwnd may be very low (even just 1 packet), so we should ACK * immediately. */ - inet_csk(sk)->icsk_ack.pending |= ICSK_ACK_NOW; + if (TCP_SKB_CB(skb)->seq != TCP_SKB_CB(skb)->end_seq) + inet_csk(sk)->icsk_ack.pending |= ICSK_ACK_NOW; } } @@ -3665,6 +3666,15 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) tcp_in_ack_event(sk, ack_ev_flags); } + /* This is a deviation from RFC3168 since it states that: + * "When the TCP data sender is ready to set the CWR bit after reducing + * the congestion window, it SHOULD set the CWR bit only on the first + * new data packet that it transmits." + * We accept CWR on pure ACKs to be more robust + * with widely-deployed TCP implementations that do this. + */ + tcp_ecn_accept_cwr(sk, skb); + /* We passed data and got it acked, remove any soft error * log. Something worked... */ @@ -4703,8 +4713,6 @@ static void tcp_data_queue(struct sock *sk, struct sk_buff *skb) skb_dst_drop(skb); __skb_pull(skb, tcp_hdr(skb)->doff * 4); - tcp_ecn_accept_cwr(sk, skb); - tp->rx_opt.dsack = 0; /* Queue data for delivery to the user. -- cgit v1.2.3 From bcf95ac62cb51d5e24be2ccaeab5fbf64da7f582 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 15 Jun 2020 20:37:07 -0700 Subject: tcp: grow window for OOO packets only for SACK flows [ Upstream commit 662051215c758ae8545451628816204ed6cd372d ] Back in 2013, we made a change that broke fast retransmit for non SACK flows. Indeed, for these flows, a sender needs to receive three duplicate ACK before starting fast retransmit. Sending ACK with different receive window do not count. Even if enabling SACK is strongly recommended these days, there still are some cases where it has to be disabled. Not increasing the window seems better than having to rely on RTO. After the fix, following packetdrill test gives : // Initialize connection 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 +0 > S. 0:0(0) ack 1 +0 < . 1:1(0) ack 1 win 514 +0 accept(3, ..., ...) = 4 +0 < . 1:1001(1000) ack 1 win 514 // Quick ack +0 > . 1:1(0) ack 1001 win 264 +0 < . 2001:3001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 3001:4001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 4001:5001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 1001:2001(1000) ack 1 win 514 // Hole is repaired. +0 > . 1:1(0) ack 5001 win 272 Fixes: 4e4f1fc22681 ("tcp: properly increase rcv_ssthresh for ofo packets") Signed-off-by: Eric Dumazet Reported-by: Venkat Venkatsubra Acked-by: Neal Cardwell Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv4/tcp_input.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index ee1b4804b40d..7441ecfc8320 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4528,7 +4528,11 @@ static void tcp_data_queue_ofo(struct sock *sk, struct sk_buff *skb) if (tcp_ooo_try_coalesce(sk, tp->ooo_last_skb, skb, &fragstolen)) { coalesce_done: - tcp_grow_window(sk, skb); + /* For non sack flows, do not grow window to force DUPACK + * and trigger fast retransmit. + */ + if (tcp_is_sack(tp)) + tcp_grow_window(sk, skb); kfree_skb_partial(skb, fragstolen); skb = NULL; goto add_sack; @@ -4612,7 +4616,11 @@ add_sack: tcp_sack_new_ofo_skb(sk, seq, end_seq); end: if (skb) { - tcp_grow_window(sk, skb); + /* For non sack flows, do not grow window to force DUPACK + * and trigger fast retransmit. + */ + if (tcp_is_sack(tp)) + tcp_grow_window(sk, skb); skb_condense(skb); skb_set_owner_r(skb, sk); } -- cgit v1.2.3 From 000904251905e2b5a85bba3effdae1de2ac93535 Mon Sep 17 00:00:00 2001 From: David Christensen Date: Wed, 17 Jun 2020 11:51:17 -0700 Subject: tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezes [ Upstream commit 3a2656a211caf35e56afc9425e6e518fa52f7fbc ] The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by: David Christensen Reviewed-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/broadcom/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a12962702611..be845df05039 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -18229,8 +18229,8 @@ static pci_ers_result_t tg3_io_error_detected(struct pci_dev *pdev, rtnl_lock(); - /* We probably don't have netdev yet */ - if (!netdev || !netif_running(netdev)) + /* Could be second call or maybe we don't have netdev yet */ + if (!netdev || tp->pcierr_recovery || !netif_running(netdev)) goto done; /* We needn't recover from permanent error */ -- cgit v1.2.3 From a611d1a063b36cbbab3523eeb146e68b244538db Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 16 Jun 2020 16:04:00 +0000 Subject: ip6_gre: fix use-after-free in ip6gre_tunnel_lookup() [ Upstream commit dafabb6590cb15f300b77c095d50312e2c7c8e0f ] In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \ remote fc:0::2 ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1 ip netns exec A ip link set ip6gre1 up ip netns exec A ip -6 a a fc:0::1/64 dev eth0 ip netns exec A ip link set ip6gre0 up ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \ remote fc:0::1 ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1 ip netns exec B ip link set ip6gre1 up ip netns exec B ip -6 a a fc:0::2/64 dev eth1 ip netns exec B ip link set ip6gre0 up ip netns exec A ping fc:100::2 -s 60000 & ip netns del B Splat looks like: [ 73.087285][ C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.088361][ C1] Read of size 4 at addr ffff888040559218 by task ping/1429 [ 73.089317][ C1] [ 73.089638][ C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602 [ 73.090531][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 73.091725][ C1] Call Trace: [ 73.092160][ C1] [ 73.092556][ C1] dump_stack+0x96/0xdb [ 73.093122][ C1] print_address_description.constprop.6+0x2cc/0x450 [ 73.094016][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.094894][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.095767][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.096619][ C1] kasan_report+0x154/0x190 [ 73.097209][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.097989][ C1] ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.098750][ C1] ? gre_del_protocol+0x60/0x60 [gre] [ 73.099500][ C1] gre_rcv+0x1c5/0x1450 [ip6_gre] [ 73.100199][ C1] ? ip6gre_header+0xf00/0xf00 [ip6_gre] [ 73.100985][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.101830][ C1] ? ip6_input_finish+0x5/0xf0 [ 73.102483][ C1] ip6_protocol_deliver_rcu+0xcbb/0x1510 [ 73.103296][ C1] ip6_input_finish+0x5b/0xf0 [ 73.103920][ C1] ip6_input+0xcd/0x2c0 [ 73.104473][ C1] ? ip6_input_finish+0xf0/0xf0 [ 73.105115][ C1] ? rcu_read_lock_held+0x90/0xa0 [ 73.105783][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.106548][ C1] ipv6_rcv+0x1f1/0x300 [ ... ] Suggested-by: Eric Dumazet Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv6/ip6_gre.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 90621d498fd1..f5144573c45c 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -132,6 +132,7 @@ static struct ip6_tnl *ip6gre_tunnel_lookup(struct net_device *dev, gre_proto == htons(ETH_P_ERSPAN2)) ? ARPHRD_ETHER : ARPHRD_IP6GRE; int score, cand_score = 4; + struct net_device *ndev; for_each_ip_tunnel_rcu(t, ign->tunnels_r_l[h0 ^ h1]) { if (!ipv6_addr_equal(local, &t->parms.laddr) || @@ -243,9 +244,9 @@ static struct ip6_tnl *ip6gre_tunnel_lookup(struct net_device *dev, if (t && t->dev->flags & IFF_UP) return t; - dev = ign->fb_tunnel_dev; - if (dev && dev->flags & IFF_UP) - return netdev_priv(dev); + ndev = READ_ONCE(ign->fb_tunnel_dev); + if (ndev && ndev->flags & IFF_UP) + return netdev_priv(ndev); return NULL; } @@ -418,6 +419,8 @@ static void ip6gre_tunnel_uninit(struct net_device *dev) ip6gre_tunnel_unlink_md(ign, t); ip6gre_tunnel_unlink(ign, t); + if (ign->fb_tunnel_dev == dev) + WRITE_ONCE(ign->fb_tunnel_dev, NULL); dst_cache_reset(&t->dst_cache); dev_put(dev); } -- cgit v1.2.3 From 1c5f764382ea2f8b8403d598ab52a49eb98a3fb1 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 19 Jun 2020 11:47:47 -0700 Subject: net: phy: Check harder for errors in get_phy_id() [ Upstream commit b2ffc75e2e990b09903f9d15ccd53bc5f3a4217c ] Commit 02a6efcab675 ("net: phy: allow scanning busses with missing phys") added a special condition to return -ENODEV in case -ENODEV or -EIO was returned from the first read of the MII_PHYSID1 register. In case the MDIO bus data line pull-up is not strong enough, the MDIO bus controller will not flag this as a read error. This can happen when a pluggable daughter card is not connected and weak internal pull-ups are used (since that is the only option, otherwise the pins are floating). The second read of MII_PHYSID2 will be correctly flagged an error though, but now we will return -EIO which will be treated as a hard error, thus preventing MDIO bus scanning loops to continue succesfully. Apply the same logic to both register reads, thus allowing the scanning logic to proceed. Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/phy/phy_device.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 302d183beb9e..54ac599cffb4 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -606,8 +606,10 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, /* Grab the bits from PHYIR2, and put them in the lower half */ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); - if (phy_reg < 0) - return -EIO; + if (phy_reg < 0) { + /* returning -ENODEV doesn't stop bus scanning */ + return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO; + } *phy_id |= (phy_reg & 0xffff); -- cgit v1.2.3 From 3ee1d44453d50b76c05a884623f940d1ad9e82e3 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 16 Jun 2020 16:51:51 +0000 Subject: ip_tunnel: fix use-after-free in ip_tunnel_lookup() [ Upstream commit ba61539c6ae57f4146284a5cb4f7b7ed8d42bf45 ] In the datapath, the ip_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add gre1 type gre local 10.0.0.1 \ remote 10.0.0.2 ip netns exec A ip link set gre1 up ip netns exec A ip a a 10.0.100.1/24 dev gre1 ip netns exec A ip a a 10.0.0.1/24 dev eth0 ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add gre1 type gre local 10.0.0.2 \ remote 10.0.0.1 ip netns exec B ip link set gre1 up ip netns exec B ip a a 10.0.100.2/24 dev gre1 ip netns exec B ip a a 10.0.0.2/24 dev eth1 ip netns exec A hping3 10.0.100.2 -2 --flood -d 60000 & ip netns del B Splat looks like: [ 77.793450][ C3] ================================================================== [ 77.794702][ C3] BUG: KASAN: use-after-free in ip_tunnel_lookup+0xcc4/0xf30 [ 77.795573][ C3] Read of size 4 at addr ffff888060bd9c84 by task hping3/2905 [ 77.796398][ C3] [ 77.796664][ C3] CPU: 3 PID: 2905 Comm: hping3 Not tainted 5.8.0-rc1+ #616 [ 77.797474][ C3] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 77.798453][ C3] Call Trace: [ 77.798815][ C3] [ 77.799142][ C3] dump_stack+0x9d/0xdb [ 77.799605][ C3] print_address_description.constprop.7+0x2cc/0x450 [ 77.800365][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.800908][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.801517][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.802145][ C3] kasan_report+0x154/0x190 [ 77.802821][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.803503][ C3] ip_tunnel_lookup+0xcc4/0xf30 [ 77.804165][ C3] __ipgre_rcv+0x1ab/0xaa0 [ip_gre] [ 77.804862][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.805621][ C3] gre_rcv+0x304/0x1910 [ip_gre] [ 77.806293][ C3] ? lock_acquire+0x1a9/0x870 [ 77.806925][ C3] ? gre_rcv+0xfe/0x354 [gre] [ 77.807559][ C3] ? erspan_xmit+0x2e60/0x2e60 [ip_gre] [ 77.808305][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.809032][ C3] ? rcu_read_lock_held+0x90/0xa0 [ 77.809713][ C3] gre_rcv+0x1b8/0x354 [gre] [ ... ] Suggested-by: Eric Dumazet Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv4/ip_tunnel.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index b37abba3b369..375d0e516d85 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -98,9 +98,10 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn, __be32 remote, __be32 local, __be32 key) { - unsigned int hash; struct ip_tunnel *t, *cand = NULL; struct hlist_head *head; + struct net_device *ndev; + unsigned int hash; hash = ip_tunnel_hash(key, remote); head = &itn->tunnels[hash]; @@ -175,8 +176,9 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn, if (t && t->dev->flags & IFF_UP) return t; - if (itn->fb_tunnel_dev && itn->fb_tunnel_dev->flags & IFF_UP) - return netdev_priv(itn->fb_tunnel_dev); + ndev = READ_ONCE(itn->fb_tunnel_dev); + if (ndev && ndev->flags & IFF_UP) + return netdev_priv(ndev); return NULL; } @@ -1212,9 +1214,9 @@ void ip_tunnel_uninit(struct net_device *dev) struct ip_tunnel_net *itn; itn = net_generic(net, tunnel->ip_tnl_net_id); - /* fb_tunnel_dev will be unregisted in net-exit call. */ - if (itn->fb_tunnel_dev != dev) - ip_tunnel_del(itn, netdev_priv(dev)); + ip_tunnel_del(itn, netdev_priv(dev)); + if (itn->fb_tunnel_dev == dev) + WRITE_ONCE(itn->fb_tunnel_dev, NULL); dst_cache_reset(&tunnel->dst_cache); } -- cgit v1.2.3 From 79b73b9f816fe758a423e0bca65452f80042e47e Mon Sep 17 00:00:00 2001 From: Ilya Ponetayev Date: Thu, 25 Jun 2020 22:12:07 +0200 Subject: sch_cake: don't try to reallocate or unshare skb unconditionally MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 9208d2863ac689a563b92f2161d8d1e7127d0add ] cake_handle_diffserv() tries to linearize mac and network header parts of skb and to make it writable unconditionally. In some cases it leads to full skb reallocation, which reduces throughput and increases CPU load. Some measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable() reallocates skb, if skb was allocated in ethernet driver via so-called 'build skb' method from page cache (it was discovered by strange increase of kmalloc-2048 slab at first). Obtain DSCP value via read-only skb_header_pointer() call, and leave linearization only for DSCP bleaching or ECN CE setting. And, as an additional optimisation, skip diffserv parsing entirely if it is not needed by the current configuration. Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits") Signed-off-by: Ilya Ponetayev [ fix a few style issues, reflow commit message ] Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/sched/sch_cake.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-) diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index 824e3c37e5dd..c0d92a251bcb 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -1510,30 +1510,49 @@ static unsigned int cake_drop(struct Qdisc *sch, struct sk_buff **to_free) static u8 cake_handle_diffserv(struct sk_buff *skb, u16 wash) { - int wlen = skb_network_offset(skb); + const int offset = skb_network_offset(skb); + u16 *buf, buf_; u8 dscp; switch (tc_skb_protocol(skb)) { case htons(ETH_P_IP): - wlen += sizeof(struct iphdr); - if (!pskb_may_pull(skb, wlen) || - skb_try_make_writable(skb, wlen)) + buf = skb_header_pointer(skb, offset, sizeof(buf_), &buf_); + if (unlikely(!buf)) return 0; - dscp = ipv4_get_dsfield(ip_hdr(skb)) >> 2; - if (wash && dscp) + /* ToS is in the second byte of iphdr */ + dscp = ipv4_get_dsfield((struct iphdr *)buf) >> 2; + + if (wash && dscp) { + const int wlen = offset + sizeof(struct iphdr); + + if (!pskb_may_pull(skb, wlen) || + skb_try_make_writable(skb, wlen)) + return 0; + ipv4_change_dsfield(ip_hdr(skb), INET_ECN_MASK, 0); + } + return dscp; case htons(ETH_P_IPV6): - wlen += sizeof(struct ipv6hdr); - if (!pskb_may_pull(skb, wlen) || - skb_try_make_writable(skb, wlen)) + buf = skb_header_pointer(skb, offset, sizeof(buf_), &buf_); + if (unlikely(!buf)) return 0; - dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> 2; - if (wash && dscp) + /* Traffic class is in the first and second bytes of ipv6hdr */ + dscp = ipv6_get_dsfield((struct ipv6hdr *)buf) >> 2; + + if (wash && dscp) { + const int wlen = offset + sizeof(struct ipv6hdr); + + if (!pskb_may_pull(skb, wlen) || + skb_try_make_writable(skb, wlen)) + return 0; + ipv6_change_dsfield(ipv6_hdr(skb), INET_ECN_MASK, 0); + } + return dscp; case htons(ETH_P_ARP): -- cgit v1.2.3 From 4184cc370ade15c9405833e630a878a01a56ec0c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= Date: Thu, 25 Jun 2020 22:12:09 +0200 Subject: sch_cake: fix a few style nits MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 3f608f0c41360b11b04c763f348b712f651c8bac ] I spotted a few nits when comparing the in-tree version of sch_cake with the out-of-tree one: A redundant error variable declaration shadowing an outer declaration, and an indentation alignment issue. Fix both of these. Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/sched/sch_cake.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index c0d92a251bcb..d8064cb521c4 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -2649,7 +2649,7 @@ static int cake_init(struct Qdisc *sch, struct nlattr *opt, qdisc_watchdog_init(&q->watchdog, sch); if (opt) { - int err = cake_change(sch, opt, extack); + err = cake_change(sch, opt, extack); if (err) return err; @@ -2963,7 +2963,7 @@ static int cake_dump_class_stats(struct Qdisc *sch, unsigned long cl, PUT_STAT_S32(BLUE_TIMER_US, ktime_to_us( ktime_sub(now, - flow->cvars.blue_timer))); + flow->cvars.blue_timer))); } if (flow->cvars.dropping) { PUT_STAT_S32(DROP_NEXT_US, -- cgit v1.2.3 From 98e4a3407566f8e7dbd89b1d522eb894b1fefaa3 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Wed, 24 Jun 2020 12:42:02 -0400 Subject: tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT [ Upstream commit b344579ca8478598937215f7005d6c7b84d28aee ] Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an ACK when the minimum rtt of a connection goes down. From inspection it is clear from the existing code that this could happen in an example like the following: o The first 8 RTT samples in a round trip are 150ms, resulting in a curr_rtt of 150ms and a delay_min of 150ms. o The 9th RTT sample is 100ms. The curr_rtt does not change after the first 8 samples, so curr_rtt remains 150ms. But delay_min can be lowered at any time, so delay_min falls to 100ms. The code executes the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min of 100ms, and the curr_rtt is declared far enough above delay_min to force a (spurious) exit of Slow start. The fix here is simple: allow every RTT sample in a round trip to lower the curr_rtt. Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3") Reported-by: Mirja Kuehlewind Signed-off-by: Neal Cardwell Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv4/tcp_cubic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c index 78bfadfcf342..8b5ba0a5cd38 100644 --- a/net/ipv4/tcp_cubic.c +++ b/net/ipv4/tcp_cubic.c @@ -403,6 +403,8 @@ static void hystart_update(struct sock *sk, u32 delay) if (hystart_detect & HYSTART_DELAY) { /* obtain the minimum delay of more than sampling packets */ + if (ca->curr_rtt > delay) + ca->curr_rtt = delay; if (ca->sample_cnt < HYSTART_MIN_SAMPLES) { if (ca->curr_rtt == 0 || ca->curr_rtt > delay) ca->curr_rtt = delay; -- cgit v1.2.3 From 90814e33ff3299bf9ee8f9c3c01b21b9310517b3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= Date: Thu, 25 Jun 2020 22:12:08 +0200 Subject: sch_cake: don't call diffserv parsing code when it is not needed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 8c95eca0bb8c4bd2231a0d581f1ad0d50c90488c ] As a further optimisation of the diffserv parsing codepath, we can skip it entirely if CAKE is configured to neither use diffserv-based classification, nor to zero out the diffserv bits. Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits") Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/sched/sch_cake.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index d8064cb521c4..d03f843647ae 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -1508,7 +1508,7 @@ static unsigned int cake_drop(struct Qdisc *sch, struct sk_buff **to_free) return idx + (tin << 16); } -static u8 cake_handle_diffserv(struct sk_buff *skb, u16 wash) +static u8 cake_handle_diffserv(struct sk_buff *skb, bool wash) { const int offset = skb_network_offset(skb); u16 *buf, buf_; @@ -1569,13 +1569,16 @@ static struct cake_tin_data *cake_select_tin(struct Qdisc *sch, { struct cake_sched_data *q = qdisc_priv(sch); u32 tin; + bool wash; u8 dscp; /* Tin selection: Default to diffserv-based selection, allow overriding - * using firewall marks or skb->priority. + * using firewall marks or skb->priority. Call DSCP parsing early if + * wash is enabled, otherwise defer to below to skip unneeded parsing. */ - dscp = cake_handle_diffserv(skb, - q->rate_flags & CAKE_FLAG_WASH); + wash = !!(q->rate_flags & CAKE_FLAG_WASH); + if (wash) + dscp = cake_handle_diffserv(skb, wash); if (q->tin_mode == CAKE_DIFFSERV_BESTEFFORT) tin = 0; @@ -1586,6 +1589,8 @@ static struct cake_tin_data *cake_select_tin(struct Qdisc *sch, tin = q->tin_order[TC_H_MIN(skb->priority) - 1]; else { + if (!wash) + dscp = cake_handle_diffserv(skb, wash); tin = q->tin_index[dscp]; if (unlikely(tin >= q->tin_cnt)) -- cgit v1.2.3 From b821d05999e4a0d751fef950bf8b8701be382dec Mon Sep 17 00:00:00 2001 From: guodeqing Date: Wed, 17 Jun 2020 10:07:16 +0800 Subject: net: Fix the arp error in some cases [ Upstream commit 5eea3a63ff4aba6a26002e657a6d21934b7e2b96 ] ie., $ ifconfig eth0 6.6.6.6 netmask 255.255.255.0 $ ip rule add from 6.6.6.6 table 6666 $ ip route add 9.9.9.9 via 6.6.6.6 $ ping -I 6.6.6.6 9.9.9.9 PING 9.9.9.9 (9.9.9.9) from 6.6.6.6 : 56(84) bytes of data. 3 packets transmitted, 0 received, 100% packet loss, time 2079ms $ arp Address HWtype HWaddress Flags Mask Iface 6.6.6.6 (incomplete) eth0 The arp request address is error, this is because fib_table_lookup in fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST. Here I add a check of whether this is RT_TABLE_MAIN to solve this problem. Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups") Signed-off-by: guodeqing Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv4/fib_semantics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index a8fc4e83cd95..9573cd242b90 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -831,7 +831,7 @@ static int fib_check_nh(struct fib_config *cfg, struct fib_nh *nh, if (fl4.flowi4_scope < RT_SCOPE_LINK) fl4.flowi4_scope = RT_SCOPE_LINK; - if (cfg->fc_table) + if (cfg->fc_table && cfg->fc_table != RT_TABLE_MAIN) tbl = fib_get_table(net, cfg->fc_table); if (tbl) -- cgit v1.2.3 From 5104916360636b374b229b5b9cfa477f23e9d859 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Mon, 22 Jun 2020 23:26:04 +0300 Subject: net: Do not clear the sock TX queue in sk_set_socket() [ Upstream commit 41b14fb8724d5a4b382a63cb4a1a61880347ccb8 ] Clearing the sock TX queue in sk_set_socket() might cause unexpected out-of-order transmit when called from sock_orphan(), as outstanding packets can pick a different TX queue and bypass the ones already queued. This is undesired in general. More specifically, it breaks the in-order scheduling property guarantee for device-offloaded TLS sockets. Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it explicitly only where needed. Fixes: e022f0b4a03f ("net: Introduce sk_tx_queue_mapping") Signed-off-by: Tariq Toukan Reviewed-by: Boris Pismenny Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- include/net/sock.h | 1 - net/core/sock.c | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/net/sock.h b/include/net/sock.h index f359e5c94762..e2df102e669e 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1775,7 +1775,6 @@ static inline int sk_rx_queue_get(const struct sock *sk) static inline void sk_set_socket(struct sock *sk, struct socket *sock) { - sk_tx_queue_clear(sk); sk->sk_socket = sock; } diff --git a/net/core/sock.c b/net/core/sock.c index b11d116383da..8721264a2b39 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1540,6 +1540,7 @@ struct sock *sk_alloc(struct net *net, int family, gfp_t priority, cgroup_sk_alloc(&sk->sk_cgrp_data); sock_update_classid(&sk->sk_cgrp_data); sock_update_netprioidx(&sk->sk_cgrp_data); + sk_tx_queue_clear(sk); } return sk; @@ -1747,6 +1748,7 @@ struct sock *sk_clone_lock(const struct sock *sk, const gfp_t priority) */ sk_refcnt_debug_inc(newsk); sk_set_socket(newsk, NULL); + sk_tx_queue_clear(newsk); newsk->sk_wq = NULL; if (newsk->sk_prot->sockets_allocated) -- cgit v1.2.3 From b11d1c71912b1f3e4474e1b231a2d21d2b9e3a27 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 16 Jun 2020 15:52:05 +0000 Subject: net: core: reduce recursion limit value [ Upstream commit fb7861d14c8d7edac65b2fcb6e8031cb138457b2 ] In the current code, ->ndo_start_xmit() can be executed recursively only 10 times because of stack memory. But, in the case of the vxlan, 10 recursion limit value results in a stack overflow. In the current code, the nested interface is limited by 8 depth. There is no critical reason that the recursion limitation value should be 10. So, it would be good to be the same value with the limitation value of nesting interface depth. Test commands: ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789 ip link set vxlan10 up ip a a 192.168.10.1/24 dev vxlan10 ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent for i in {9..0} do let A=$i+1 ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789 ip link set vxlan$i up ip a a 192.168.$i.1/24 dev vxlan$i ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self done hping3 192.168.10.2 -2 -d 60000 Splat looks like: [ 103.814237][ T1127] ============================================================================= [ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000 [ 103.873187][ T1127] ----------------------------------------------------------------------------- [ 103.873187][ T1127] [ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020 [ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575 [ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 103.883006][ T1127] Call Trace: [ 103.883324][ T1127] dump_stack+0x96/0xdb [ 103.883716][ T1127] slab_err+0xad/0xd0 [ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30 [ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360 [ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160 [ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.886316][ T1127] check_slab+0x97/0xb0 [ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0 [ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630 [ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.888265][ T1127] ? lock_downgrade+0x730/0x730 [ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80 [ 103.889675][ T1127] __slab_alloc+0x3e/0x80 [ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420 [ ... ] Fixes: 11a766ce915f ("net: Increase xmit RECURSION_LIMIT to 10.") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 85dc3497c74f..4e14926433ed 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3004,7 +3004,7 @@ static inline int dev_recursion_level(void) return this_cpu_read(softnet_data.xmit.recursion); } -#define XMIT_RECURSION_LIMIT 10 +#define XMIT_RECURSION_LIMIT 8 static inline bool dev_xmit_recursion(void) { return unlikely(__this_cpu_read(softnet_data.xmit.recursion) > -- cgit v1.2.3 From b9baada66bedabfd63cbaa8cf6aa6172bab922e1 Mon Sep 17 00:00:00 2001 From: Chuhong Yuan Date: Wed, 10 Jun 2020 10:48:44 +0800 Subject: USB: ohci-sm501: Add missed iounmap() in remove commit 07c112fb09c86c0231f6ff0061a000ffe91c8eb9 upstream. This driver misses calling iounmap() in remove to undo the ioremap() called in probe. Add the missed call to fix it. Fixes: f54aab6ebcec ("usb: ohci-sm501 driver") Cc: stable Signed-off-by: Chuhong Yuan Acked-by: Alan Stern Link: https://lore.kernel.org/r/20200610024844.3628408-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-sm501.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index c9233cddf9a2..0a39dc58f376 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -196,6 +196,7 @@ static int ohci_hcd_sm501_drv_remove(struct platform_device *pdev) struct resource *mem; usb_remove_hcd(hcd); + iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); dma_release_declared_memory(&pdev->dev); -- cgit v1.2.3 From 52404065c8300985bd920d55b4609cb189f3872b Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 9 Jun 2020 12:28:11 +0400 Subject: usb: dwc2: Postponed gadget registration to the udc class driver commit 207324a321a866401b098cadf19e4a2dd6584622 upstream. During dwc2 driver probe, after gadget registration to the udc class driver, if exist any builtin function driver it immediately bound to dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode. Patch postpone gadget registration after host side initialization done. Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code") Reported-by: kbuild test robot Tested-by: Marek Vasut Cc: stable Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 6 ------ drivers/usb/dwc2/platform.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index d8424834902d..f18aa3f59e51 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -4759,12 +4759,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) epnum, 0); } - ret = usb_add_gadget_udc(dev, &hsotg->gadget); - if (ret) { - dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, - hsotg->ctrl_req); - return ret; - } dwc2_hsotg_dump(hsotg); return 0; diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 577642895b57..c3383f30b37a 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -492,6 +492,17 @@ static int dwc2_driver_probe(struct platform_device *dev) if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) dwc2_lowlevel_hw_disable(hsotg); +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /* Postponed adding a new gadget to the udc class driver list */ + if (hsotg->gadget_enabled) { + retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget); + if (retval) { + dwc2_hsotg_remove(hsotg); + goto error; + } + } +#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ return 0; error: -- cgit v1.2.3 From 8736e585dc1565f4373109769b298e653158ceb2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Tomasz=20Meresi=C5=84ski?= Date: Wed, 3 Jun 2020 22:33:46 +0200 Subject: usb: add USB_QUIRK_DELAY_INIT for Logitech C922 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 5d8021923e8a8cc37a421a64e27c7221f0fee33c upstream. The Logitech C922, just like other Logitech webcams, needs the USB_QUIRK_DELAY_INIT or it will randomly not respond after device connection Signed-off-by: Tomasz MeresiÅ„ski Cc: stable Link: https://lore.kernel.org/r/20200603203347.7792-1-tomasz@meresinski.eu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 3e8efe759c3e..e0b77674869c 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -218,11 +218,12 @@ static const struct usb_device_id usb_quirk_list[] = { /* Logitech HD Webcam C270 */ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, - /* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */ + /* Logitech HD Pro Webcams C920, C920-C, C922, C925e and C930e */ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x085c), .driver_info = USB_QUIRK_DELAY_INIT }, /* Logitech ConferenceCam CC3000e */ { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT }, -- cgit v1.2.3 From 290156ff4015f73b84625c0a581a4d83927f2f39 Mon Sep 17 00:00:00 2001 From: Longfang Liu Date: Mon, 8 Jun 2020 11:46:59 +0800 Subject: USB: ehci: reopen solution for Synopsys HC bug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 1ddcb71a3edf0e1682b6e056158e4c4b00325f66 upstream. A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which might cause the host controller not issuing ping. Bug description: After indicating an Interrupt on Async Advance, the software uses the doorbell mechanism to delete the Next Link queue head of the last executed queue head. At this time, the host controller still references the removed queue head(the queue head is NULL). NULL reference causes the host controller to lose the USB device. Solution: After deleting the Next Link queue head, when has_synopsys_hc_bug set to 1，the software can write one of the valid queue head addresses to the ASYNCLISTADDR register to allow the host controller to get the valid queue head. in order to solve that problem, this patch set the flag for Huawei Kunpeng920 There are detailed instructions and solutions in this patch: commit 2f7ac6c19997 ("USB: ehci: add workaround for Synopsys HC bug") Signed-off-by: Longfang Liu Cc: stable Acked-by: Alan Stern Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index fe9422d3bcdc..fcfad5c298a9 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -216,6 +216,13 @@ static int ehci_pci_setup(struct usb_hcd *hcd) ehci_info(ehci, "applying MosChip frame-index workaround\n"); ehci->frame_index_bug = 1; break; + case PCI_VENDOR_ID_HUAWEI: + /* Synopsys HC bug */ + if (pdev->device == 0xa239) { + ehci_info(ehci, "applying Synopsys HC workaround\n"); + ehci->has_synopsys_hc_bug = 1; + } + break; } /* optional debug port, normally in the first BAR */ -- cgit v1.2.3 From fdde366619c61520b628ce13a30b21cef0e5260b Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Wed, 24 Jun 2020 16:59:47 +0300 Subject: usb: host: xhci-mtk: avoid runtime suspend when removing hcd commit a24d5072e87457a14023ee1dd3fc8b1e76f899ef upstream. When runtime suspend was enabled, runtime suspend might happen when xhci is removing hcd. This might cause kernel panic when hcd has been freed but runtime pm suspend related handle need to reference it. Signed-off-by: Macpaul Lin Reviewed-by: Chunfeng Yun Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mtk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 60987c787e44..2c3b31109e16 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -592,6 +592,9 @@ static int xhci_mtk_remove(struct platform_device *dev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct usb_hcd *shared_hcd = xhci->shared_hcd; + pm_runtime_put_noidle(&dev->dev); + pm_runtime_disable(&dev->dev); + usb_remove_hcd(shared_hcd); xhci->shared_hcd = NULL; device_init_wakeup(&dev->dev, false); @@ -602,8 +605,6 @@ static int xhci_mtk_remove(struct platform_device *dev) xhci_mtk_sch_exit(mtk); xhci_mtk_clks_disable(mtk); xhci_mtk_ldos_disable(mtk); - pm_runtime_put_sync(&dev->dev); - pm_runtime_disable(&dev->dev); return 0; } -- cgit v1.2.3 From e5e2b5087d32e0737a919bfb232c49ecd627420c Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 24 Jun 2020 16:59:49 +0300 Subject: xhci: Poll for U0 after disabling USB2 LPM commit b3d71abd135e6919ca0b6cab463738472653ddfb upstream. USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b4177287d7d0..b02b83a38dca 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4385,6 +4385,9 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, mutex_lock(hcd->bandwidth_mutex); xhci_change_max_exit_latency(xhci, udev, 0); mutex_unlock(hcd->bandwidth_mutex); + readl_poll_timeout(ports[port_num]->addr, pm_val, + (pm_val & PORT_PLS_MASK) == XDEV_U0, + 100, 10000); return 0; } } -- cgit v1.2.3 From bbf360ace613e1f59cc3a13758b738672d96a54f Mon Sep 17 00:00:00 2001 From: Tang Bin Date: Tue, 2 Jun 2020 19:47:08 +0800 Subject: usb: host: ehci-exynos: Fix error check in exynos_ehci_probe() commit 44ed240d62736ad29943ec01e41e194b96f7c5e9 upstream. If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 1bcc5aa87f04 ("USB: Add initial S5P EHCI driver") Cc: stable Signed-off-by: Zhang Shengju Signed-off-by: Tang Bin Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-exynos.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 8e3bab1e0c1f..f433883ca2bf 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -188,9 +188,8 @@ static int exynos_ehci_probe(struct platform_device *pdev) hcd->rsrc_len = resource_size(res); irq = platform_get_irq(pdev, 0); - if (!irq) { - dev_err(&pdev->dev, "Failed to get IRQ\n"); - err = -ENODEV; + if (irq < 0) { + err = irq; goto fail_io; } -- cgit v1.2.3 From 4309ab96ab744703871e35d829177dd9347bf643 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Thu, 4 Jun 2020 19:21:18 +0800 Subject: usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs commit 302c570bf36e997d55ad0d60628a2feec76954a4 upstream. John reported screaming irq caused by rt1711h when system boot[1], this is because irq request is done before tcpci_register_port(), so the chip->tcpci has not been setup, irq handler is entered but can't do anything, this patch is to address this by moving the irq request after tcpci_register_port(). [1] https://lore.kernel.org/linux-usb/20200530040157.31038-1-john.stultz@linaro.org Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver") Cc: stable # v4.18+ Cc: John Stultz Reported-and-tested-by: John Stultz Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Signed-off-by: Li Jun Link: https://lore.kernel.org/r/20200604112118.38062-1-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpci_rt1711h.c | 31 ++++++++++--------------------- 1 file changed, 10 insertions(+), 21 deletions(-) diff --git a/drivers/usb/typec/tcpci_rt1711h.c b/drivers/usb/typec/tcpci_rt1711h.c index 017389021b96..b56a0880a044 100644 --- a/drivers/usb/typec/tcpci_rt1711h.c +++ b/drivers/usb/typec/tcpci_rt1711h.c @@ -179,26 +179,6 @@ out: return tcpci_irq(chip->tcpci); } -static int rt1711h_init_alert(struct rt1711h_chip *chip, - struct i2c_client *client) -{ - int ret; - - /* Disable chip interrupts before requesting irq */ - ret = rt1711h_write16(chip, TCPC_ALERT_MASK, 0); - if (ret < 0) - return ret; - - ret = devm_request_threaded_irq(chip->dev, client->irq, NULL, - rt1711h_irq, - IRQF_ONESHOT | IRQF_TRIGGER_LOW, - dev_name(chip->dev), chip); - if (ret < 0) - return ret; - enable_irq_wake(client->irq); - return 0; -} - static int rt1711h_sw_reset(struct rt1711h_chip *chip) { int ret; @@ -260,7 +240,8 @@ static int rt1711h_probe(struct i2c_client *client, if (ret < 0) return ret; - ret = rt1711h_init_alert(chip, client); + /* Disable chip interrupts before requesting irq */ + ret = rt1711h_write16(chip, TCPC_ALERT_MASK, 0); if (ret < 0) return ret; @@ -271,6 +252,14 @@ static int rt1711h_probe(struct i2c_client *client, if (IS_ERR_OR_NULL(chip->tcpci)) return PTR_ERR(chip->tcpci); + ret = devm_request_threaded_irq(chip->dev, client->irq, NULL, + rt1711h_irq, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + dev_name(chip->dev), chip); + if (ret < 0) + return ret; + enable_irq_wake(client->irq); + return 0; } -- cgit v1.2.3 From 0237a33e8b6eb7236b316794ca2fd1890b7cebe4 Mon Sep 17 00:00:00 2001 From: "Yick W. Tse" Date: Sat, 13 Jun 2020 11:40:06 +0000 Subject: ALSA: usb-audio: add quirk for Denon DCD-1500RE commit c9808bbfed3cfc911ecb60fe8e80c0c27876c657 upstream. fix error "clock source 41 is not valid, cannot use" [] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00 [] New USB device strings: Mfr=1, Product=2, SerialNumber=0 [] Product: DCD-1500RE [] Manufacturer: D & M Holdings Inc. [] [] clock source 41 is not valid, cannot use [] usbcore: registered new interface driver snd-usb-audio Signed-off-by: Yick W. Tse Cc: Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index aac23acfdd36..976eee06907c 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1203,6 +1203,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) static bool is_itf_usb_dsd_dac(unsigned int id) { switch (id) { + case USB_ID(0x154e, 0x1002): /* Denon DCD-1500RE */ case USB_ID(0x154e, 0x1003): /* Denon DA-300USB */ case USB_ID(0x154e, 0x3005): /* Marantz HD-DAC1 */ case USB_ID(0x154e, 0x3006): /* Marantz SA-14S1 */ -- cgit v1.2.3 From 75208a11683a3d29b3bb93166cdac67d8cf2324b Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Tue, 23 Jun 2020 19:03:23 +0800 Subject: ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG) commit a32a1fc99807244d920d274adc46ba04b538cc8a upstream. We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051) need a tiny delay after each class compliant request. Otherwise the device might not be able to be recognized each times. Signed-off-by: Chihhao Chen Signed-off-by: Macpaul Lin Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/usb/quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 976eee06907c..8b5bc809efd3 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1345,6 +1345,14 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, chip->usb_id == USB_ID(0x0951, 0x16ad)) && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) usleep_range(1000, 2000); + + /* + * Samsung USBC Headset (AKG) need a tiny delay after each + * class compliant request. (Model number: AAM625R or AAM627R) + */ + if (chip->usb_id == USB_ID(0x04e8, 0xa051) && + (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) + usleep_range(5000, 6000); } /* -- cgit v1.2.3 From f4e1c1016ca83e6c1deb301b27aa60135a248caf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 24 Jun 2020 14:23:40 +0200 Subject: ALSA: usb-audio: Fix OOB access of mixer element list commit 220345e98f1cdc768eeb6e3364a0fa7ab9647fe7 upstream. The USB-audio mixer code holds a linked list of usb_mixer_elem_list, and several operations are performed for each mixer element. A few of them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2()) assume each mixer element being a usb_mixer_elem_info object that is a subclass of usb_mixer_elem_list, cast via container_of() and access it members. This may result in an out-of-bound access when a non-standard list element has been added, as spotted by syzkaller recently. This patch adds a new field, is_std_info, in usb_mixer_elem_list to indicate that the element is the usb_mixer_elem_info type or not, and skip the access to such an element if needed. Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/usb/mixer.c | 15 +++++++++++---- sound/usb/mixer.h | 9 +++++++-- sound/usb/mixer_quirks.c | 3 ++- 3 files changed, 20 insertions(+), 7 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 8a0211131fc6..45bd3d54be54 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -591,8 +591,9 @@ static int check_matrix_bitmap(unsigned char *bmap, * if failed, give up and free the control instance. */ -int snd_usb_mixer_add_control(struct usb_mixer_elem_list *list, - struct snd_kcontrol *kctl) +int snd_usb_mixer_add_list(struct usb_mixer_elem_list *list, + struct snd_kcontrol *kctl, + bool is_std_info) { struct usb_mixer_interface *mixer = list->mixer; int err; @@ -606,6 +607,7 @@ int snd_usb_mixer_add_control(struct usb_mixer_elem_list *list, return err; } list->kctl = kctl; + list->is_std_info = is_std_info; list->next_id_elem = mixer->id_elems[list->id]; mixer->id_elems[list->id] = list; return 0; @@ -3232,8 +3234,11 @@ void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid) unitid = delegate_notify(mixer, unitid, NULL, NULL); for_each_mixer_elem(list, mixer, unitid) { - struct usb_mixer_elem_info *info = - mixer_elem_list_to_info(list); + struct usb_mixer_elem_info *info; + + if (!list->is_std_info) + continue; + info = mixer_elem_list_to_info(list); /* invalidate cache, so the value is read from the device */ info->cached = 0; snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE, @@ -3313,6 +3318,8 @@ static void snd_usb_mixer_interrupt_v2(struct usb_mixer_interface *mixer, if (!list->kctl) continue; + if (!list->is_std_info) + continue; info = mixer_elem_list_to_info(list); if (count > 1 && info->control != control) diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h index 15ec90e96d4d..f7e6fe1a96f9 100644 --- a/sound/usb/mixer.h +++ b/sound/usb/mixer.h @@ -59,6 +59,7 @@ struct usb_mixer_elem_list { struct usb_mixer_elem_list *next_id_elem; /* list of controls with same id */ struct snd_kcontrol *kctl; unsigned int id; + bool is_std_info; usb_mixer_elem_dump_func_t dump; usb_mixer_elem_resume_func_t resume; }; @@ -96,8 +97,12 @@ void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid); int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, int request, int validx, int value_set); -int snd_usb_mixer_add_control(struct usb_mixer_elem_list *list, - struct snd_kcontrol *kctl); +int snd_usb_mixer_add_list(struct usb_mixer_elem_list *list, + struct snd_kcontrol *kctl, + bool is_std_info); + +#define snd_usb_mixer_add_control(list, kctl) \ + snd_usb_mixer_add_list(list, kctl, true) void snd_usb_mixer_elem_init_std(struct usb_mixer_elem_list *list, struct usb_mixer_interface *mixer, diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 983e8a3ebfcf..21c1135bb89b 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -168,7 +168,8 @@ static int add_single_ctl_with_resume(struct usb_mixer_interface *mixer, return -ENOMEM; } kctl->private_free = snd_usb_mixer_elem_free; - return snd_usb_mixer_add_control(list, kctl); + /* don't use snd_usb_mixer_add_control() here, this is a special list element */ + return snd_usb_mixer_add_list(list, kctl, false); } /* -- cgit v1.2.3 From d2621f1579d167b2c4133d115d6eff9557991d06 Mon Sep 17 00:00:00 2001 From: Steffen Maier Date: Tue, 23 Jun 2020 16:02:42 +0200 Subject: scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action commit 936e6b85da0476dd2edac7c51c68072da9fb4ba2 upstream. Suppose that, for unrelated reasons, FSF requests on behalf of recovery are very slow and can run into the ERP timeout. In the case at hand, we did adapter recovery to a large degree. However due to the slowness a LUN open is pending so the corresponding fc_rport remains blocked. After fast_io_fail_tmo we trigger close physical port recovery for the port under which the LUN should have been opened. The new higher order port recovery dismisses the pending LUN open ERP action and dismisses the pending LUN open FSF request. Such dismissal decouples the ERP action from the pending corresponding FSF request by setting zfcp_fsf_req->erp_action to NULL (among other things) [zfcp_erp_strategy_check_fsfreq()]. If now the ERP timeout for the pending open LUN request runs out, we must not use zfcp_fsf_req->erp_action in the ERP timeout handler. This is a problem since v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use timer_setup()"). Before that we intentionally only passed zfcp_erp_action as context argument to zfcp_erp_timeout_handler(). Note: The lifetime of the corresponding zfcp_fsf_req object continues until a (late) response or an (unrelated) adapter recovery. Just like the regular response path ignores dismissed requests [zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the ERP timeout handler now needs to ignore dismissed requests. So simply return early in the ERP timeout handler if the FSF request is marked as dismissed in its status flags. To protect against the race where zfcp_erp_strategy_check_fsfreq() dismisses and sets zfcp_fsf_req->erp_action to NULL after our previous status flag check, return early if zfcp_fsf_req->erp_action is NULL. After all, the former ERP action does not need to be woken up as that was already done as part of the dismissal above [zfcp_erp_action_dismiss()]. This fixes the following panic due to kernel page fault in IRQ context: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d Oops: 0004 ilc:2 [#1] SMP Modules linked in: ... CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G E X ... Hardware name: IBM 8561 T01 701 (LPAR) Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000 000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02 0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000 0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8 Krnl Code: 001fffff80549bd4: a7180000 lhi %r1,0 001fffff80549bd8: 4120a0f0 la %r2,240(%r10) #001fffff80549bdc: a53e0003 llilh %r3,3 >001fffff80549be0: ba132000 cs %r1,%r3,0(%r2) 001fffff80549be4: a7740037 brc 7,1fffff80549c52 001fffff80549be8: e320b0180004 lg %r2,24(%r11) 001fffff80549bee: e31020e00004 lg %r1,224(%r2) 001fffff80549bf4: 412020e0 la %r2,224(%r2) Call Trace: [<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp] [<00000985915e26f0>] call_timer_fn+0x38/0x190 [<00000985915e2944>] expire_timers+0xfc/0x190 [<00000985915e2ac4>] run_timer_softirq+0xec/0x218 [<0000098591ca7c4c>] __do_softirq+0x144/0x398 [<00000985915110aa>] do_softirq_own_stack+0x72/0x88 [<0000098591551b58>] irq_exit+0xb0/0xb8 [<0000098591510c6a>] do_IRQ+0x82/0xb0 [<0000098591ca7140>] ext_int_handler+0x128/0x12c [<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60 ([<000009859172ae4c>] clear_huge_page+0xec/0x250) [<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768 [<000009859172a712>] __handle_mm_fault+0x88a/0x900 [<000009859172a860>] handle_mm_fault+0xd8/0x1b0 [<0000098591529ef6>] do_dat_exception+0x136/0x3e8 [<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220 Last Breaking-Event-Address: [<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com Fixes: 75492a51568b ("s390/scsi: Convert timers to use timer_setup()") Cc: #4.15+ Reviewed-by: Julian Wiedmann Signed-off-by: Steffen Maier Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman --- drivers/s390/scsi/zfcp_erp.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 7522aa06672d..b7afdb55a459 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -592,7 +592,10 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) ZFCP_STATUS_ERP_TIMEDOUT)) { req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; zfcp_dbf_rec_run("erscf_1", act); - req->erp_action = NULL; + /* lock-free concurrent access with + * zfcp_erp_timeout_handler() + */ + WRITE_ONCE(req->erp_action, NULL); } if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) zfcp_dbf_rec_run("erscf_2", act); @@ -628,8 +631,14 @@ void zfcp_erp_notify(struct zfcp_erp_action *erp_action, unsigned long set_mask) void zfcp_erp_timeout_handler(struct timer_list *t) { struct zfcp_fsf_req *fsf_req = from_timer(fsf_req, t, timer); - struct zfcp_erp_action *act = fsf_req->erp_action; + struct zfcp_erp_action *act; + if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) + return; + /* lock-free concurrent access with zfcp_erp_strategy_check_fsfreq() */ + act = READ_ONCE(fsf_req->erp_action); + if (!act) + return; zfcp_erp_notify(act, ZFCP_STATUS_ERP_TIMEDOUT); } -- cgit v1.2.3 From d7ed5fc0c1c6e9c22e35076e0e28a0fdf585aa5b Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 24 Jun 2020 16:59:45 +0300 Subject: xhci: Fix incorrect EP_STATE_MASK commit dceea67058fe22075db3aed62d5cb62092be5053 upstream. EP_STATE_MASK should be 0x7 instead of 0xf xhci spec 6.2.3 shows that the EP state field in the endpoint context data structure consist of bits [2:0]. The old value included a bit from the next field which fortunately is a RsvdZ region. So hopefully this hasn't caused too much harm Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 4dedc822237f..39efbcf63c11 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -716,7 +716,7 @@ struct xhci_ep_ctx { * 4 - TRB error * 5-7 - reserved */ -#define EP_STATE_MASK (0xf) +#define EP_STATE_MASK (0x7) #define EP_STATE_DISABLED 0 #define EP_STATE_RUNNING 1 #define EP_STATE_HALTED 2 -- cgit v1.2.3 From 26a7aefb9a5fa51e65ea64d46538b58998f26b03 Mon Sep 17 00:00:00 2001 From: Al Cooper Date: Wed, 24 Jun 2020 16:59:46 +0300 Subject: xhci: Fix enumeration issue when setting max packet size for FS devices. commit a73d9d9cfc3cfceabd91fb0b0c13e4062b6dbcd7 upstream. Unable to complete the enumeration of a USB TV Tuner device. Per XHCI spec (4.6.5), the EP state field of the input context shall be cleared for a set address command. In the special case of an FS device that has "MaxPacketSize0 = 8", the Linux XHCI driver does not do this before evaluating the context. With an XHCI controller that checks the EP state field for parameter context error this causes a problem in cases such as the device getting reset again after enumeration. When that field is cleared, the problem does not occur. This was found and fixed by Sasi Kumar. Cc: stable@vger.kernel.org Signed-off-by: Al Cooper Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b02b83a38dca..7b8d839142da 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1405,6 +1405,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, xhci->devs[slot_id]->out_ctx, ep_index); ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index); + ep_ctx->ep_info &= cpu_to_le32(~EP_STATE_MASK);/* must clear */ ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK); ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size)); -- cgit v1.2.3 From a81f69d6ff96b88e23335f90ce53f4d1cfa8a817 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 24 Jun 2020 16:59:48 +0300 Subject: xhci: Return if xHCI doesn't support LPM commit f0c472a6da51f9fac15e80fe2fd9c83b68754cff upstream. Just return if xHCI is quirked to disable LPM. We can save some time from reading registers and doing spinlocks. Add stable tag as we want this patch together with the next one, "Poll for U0 after disabling USB2 LPM" which fixes a suspend issue for some USB2 LPM devices Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7b8d839142da..f8e71c7aba6e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4305,6 +4305,9 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, int hird, exit_latency; int ret; + if (xhci->quirks & XHCI_HW_LPM_DISABLE) + return -EPERM; + if (hcd->speed >= HCD_USB3 || !xhci->hw_lpm_support || !udev->lpm_capable) return -EPERM; @@ -4327,7 +4330,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); - if (enable && !(xhci->quirks & XHCI_HW_LPM_DISABLE)) { + if (enable) { /* Host supports BESL timeout instead of HIRD */ if (udev->usb2_hw_lpm_besl_capable) { /* if device doesn't have a preferred BESL value use a -- cgit v1.2.3 From a313eeaf80b647aa7bb4b8c2003290ffa6fbdf26 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Fri, 5 Jun 2020 12:54:18 +0200 Subject: cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip commit 03894573f2913181ee5aae0089f333b2131f2d4b upstream. USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready, causing garbage chars on the TTY causing stray input to the shell and/or login prompt. Signed-off-by: Joakim Tjernlund Cc: stable@vger.kernel.org Acked-by: Oliver Neukum Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e8b9b27937ed..ea7883e1fbe2 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1721,6 +1721,8 @@ static int acm_pre_reset(struct usb_interface *intf) static const struct usb_device_id acm_ids[] = { /* quirky and broken devices */ + { USB_DEVICE(0x0424, 0x274e), /* Microchip Technology, Inc. (formerly SMSC) */ + .driver_info = DISABLE_ECHO, }, /* DISABLE ECHO in termios flag */ { USB_DEVICE(0x076d, 0x0006), /* Denso Cradle CU-321 */ .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */ { USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */ -- cgit v1.2.3 From a388c0a88b7d676418b5861cfa40a159013cc6a6 Mon Sep 17 00:00:00 2001 From: Zheng Bin Date: Thu, 18 Jun 2020 12:21:37 +0800 Subject: loop: replace kill_bdev with invalidate_bdev commit f4bd34b139a3fa2808c4205f12714c65e1548c6c upstream. When a filesystem is mounted on a loop device and on a loop ioctl LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting destroyed. kill_bdev truncate_inode_pages truncate_inode_pages_range do_invalidatepage block_invalidatepage discard_buffer -->clear BH_Mapped flag sb_bread __bread_gfp bh = __getblk_gfp -->discard_buffer clear BH_Mapped flag __bread_slow submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON Fixes: 5db470e229e2 ("loop: drop caches if offset or block_size are changed") Signed-off-by: Zheng Bin Reviewed-by: Christoph Hellwig Reviewed-by: Bart Van Assche Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- drivers/block/loop.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index c1341c86bcde..728681a20b7f 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1238,7 +1238,7 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info) if (lo->lo_offset != info->lo_offset || lo->lo_sizelimit != info->lo_sizelimit) { sync_blockdev(lo->lo_device); - kill_bdev(lo->lo_device); + invalidate_bdev(lo->lo_device); } /* I/O need to be drained during transfer transition */ @@ -1512,12 +1512,12 @@ static int loop_set_block_size(struct loop_device *lo, unsigned long arg) if (lo->lo_queue->limits.logical_block_size != arg) { sync_blockdev(lo->lo_device); - kill_bdev(lo->lo_device); + invalidate_bdev(lo->lo_device); } blk_mq_freeze_queue(lo->lo_queue); - /* kill_bdev should have truncated all the pages */ + /* invalidate_bdev should have truncated all the pages */ if (lo->lo_queue->limits.logical_block_size != arg && lo->lo_device->bd_inode->i_mapping->nrpages) { err = -EAGAIN; -- cgit v1.2.3 From c5bf9f88f96212c25e824821e99194297167d848 Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Sun, 21 Jun 2020 13:47:35 +0300 Subject: IB/mad: Fix use after free when destroying MAD agent commit 116a1b9f1cb769b83e5adff323f977a62b1dcb2e upstream. Currently, when RMPP MADs are processed while the MAD agent is destroyed, it could result in use after free of rmpp_recv, as decribed below: cpu-0 cpu-1 ----- ----- ib_mad_recv_done() ib_mad_complete_recv() ib_process_rmpp_recv_wc() unregister_mad_agent() ib_cancel_rmpp_recvs() cancel_delayed_work() process_rmpp_data() start_rmpp() queue_delayed_work(rmpp_recv->cleanup_work) destroy_rmpp_recv() free_rmpp_recv() cleanup_work()[1] spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free [1] cleanup_work() == recv_cleanup_handler Fix it by waiting for the MAD agent reference count becoming zero before calling to ib_cancel_rmpp_recvs(). Fixes: 9a41e38a467c ("IB/mad: Use IDR for agent IDs") Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.org Signed-off-by: Shay Drory Reviewed-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/infiniband/core/mad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 218411282069..cd82134d517b 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -615,10 +615,10 @@ static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv) idr_unlock(&ib_mad_clients); flush_workqueue(port_priv->wq); - ib_cancel_rmpp_recvs(mad_agent_priv); deref_mad_agent(mad_agent_priv); wait_for_completion(&mad_agent_priv->comp); + ib_cancel_rmpp_recvs(mad_agent_priv); ib_mad_agent_security_cleanup(&mad_agent_priv->agent); -- cgit v1.2.3 From f4c710c4a39b8e96a88c43d138f666462f589072 Mon Sep 17 00:00:00 2001 From: Zhang Xiaoxu Date: Tue, 23 Jun 2020 07:31:53 -0400 Subject: cifs/smb3: Fix data inconsistent when punch hole [ Upstream commit acc91c2d8de4ef46ed751c5f9df99ed9a109b100 ] When punch hole success, we also can read old data from file: # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \ -c "fpunch 20 40" -c"pread 20 40" file pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0 pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page caches not updated, then the local page caches inconsistent with server. Also can be found by xfstests generic/316. So, we need to remove the page caches before send the SMB ioctl(FSCTL_SET_ZERO_DATA) to server. Fixes: 31742c5a33176 ("enable fallocate punch hole ("fallocate -p") for SMB3") Suggested-by: Pavel Shilovsky Reviewed-by: Pavel Shilovsky Signed-off-by: Zhang Xiaoxu Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French Signed-off-by: Sasha Levin --- fs/cifs/smb2ops.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 6fc16329ceb4..0b830ac8a9e7 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -2248,6 +2248,12 @@ static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon, return rc; } + /* + * We implement the punch hole through ioctl, so we need remove the page + * caches first, otherwise the data may be inconsistent with the server. + */ + truncate_pagecache_range(inode, offset, offset + len - 1); + cifs_dbg(FYI, "offset %lld len %lld", offset, len); fsctl_buf.FileOffset = cpu_to_le64(offset); -- cgit v1.2.3 From 39dad73040572bf5437ea3abd469b906d6522bc0 Mon Sep 17 00:00:00 2001 From: Zhang Xiaoxu Date: Tue, 23 Jun 2020 07:31:54 -0400 Subject: cifs/smb3: Fix data inconsistent when zero file range [ Upstream commit 6b69040247e14b43419a520f841f2b3052833df9 ] CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page cache not update, then the data inconsistent with server, which leads the xfstest generic/008 failed. So we need to remove the local page caches before send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will re-cache it. Fixes: 30175628bf7f5 ("[SMB3] Enable fallocate -z support for SMB3 mounts") Reported-by: Hulk Robot Signed-off-by: Zhang Xiaoxu Reviewed-by: Pavel Shilovsky Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French Signed-off-by: Sasha Levin --- fs/cifs/smb2ops.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 0b830ac8a9e7..2a523139a05f 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -2180,6 +2180,12 @@ static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon, inode = d_inode(cfile->dentry); cifsi = CIFS_I(inode); + /* + * We zero the range through ioctl, so we need remove the page caches + * first, otherwise the data may be inconsistent with the server. + */ + truncate_pagecache_range(inode, offset, offset + len - 1); + /* if file not oplocked can't be sure whether asking to extend size */ if (!CIFS_CACHE_READ(cifsi)) if (keep_size == false) { -- cgit v1.2.3 From 855150a762385644a8cf6535e5ec40a08207d8e7 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Mon, 1 Jun 2020 16:39:37 -0500 Subject: xfrm: Fix double ESP trailer insertion in IPsec crypto offload. [ Upstream commit 94579ac3f6d0820adc83b5dc5358ead0158101e9 ] During IPsec performance testing, we see bad ICMP checksum. The error packet has duplicated ESP trailer due to double validate_xmit_xfrm calls. The first call is from ip_output, but the packet cannot be sent because netif_xmit_frozen_or_stopped is true and the packet gets dev_requeue_skb. The second call is from NET_TX softirq. However after the first call, the packet already has the ESP trailer. Fix by marking the skb with XFRM_XMIT bit after the packet is handled by validate_xmit_xfrm to avoid duplicate ESP trailer insertion. Fixes: f6e27114a60a ("net: Add a xfrm validate function to validate_xmit_skb") Signed-off-by: Huy Nguyen Reviewed-by: Boris Pismenny Reviewed-by: Raed Salem Reviewed-by: Saeed Mahameed Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin --- include/net/xfrm.h | 1 + net/xfrm/xfrm_device.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 48dc1ce2170d..f087c8d125b8 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1083,6 +1083,7 @@ struct xfrm_offload { #define XFRM_GRO 32 #define XFRM_ESP_NO_TRAILER 64 #define XFRM_DEV_RESUME 128 +#define XFRM_XMIT 256 __u32 status; #define CRYPTO_SUCCESS 1 diff --git a/net/xfrm/xfrm_device.c b/net/xfrm/xfrm_device.c index 8634ce677142..e7a0ce98479f 100644 --- a/net/xfrm/xfrm_device.c +++ b/net/xfrm/xfrm_device.c @@ -33,7 +33,7 @@ struct sk_buff *validate_xmit_xfrm(struct sk_buff *skb, netdev_features_t featur netdev_features_t esp_features = features; struct xfrm_offload *xo = xfrm_offload(skb); - if (!xo) + if (!xo || (xo->flags & XFRM_XMIT)) return skb; if (!(features & NETIF_F_HW_ESP)) @@ -53,6 +53,8 @@ struct sk_buff *validate_xmit_xfrm(struct sk_buff *skb, netdev_features_t featur return skb; } + xo->flags |= XFRM_XMIT; + if (skb_is_gso(skb)) { struct net_device *dev = skb->dev; -- cgit v1.2.3 From 932a580890e085970f212080503d35c44d4d982f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 11 Jun 2020 13:41:53 +0100 Subject: ASoC: q6asm: handle EOS correctly [ Upstream commit 6476b60f32866be49d05e2e0163f337374c55b06 ] Successful send of EOS command does not indicate that EOS is actually finished, correct event to wait EOS is finished is EOS_RENDERED event. EOS_RENDERED means that the DSP has finished processing all the buffers for that particular session and stream. This patch fixes EOS handling! Fixes: 68fd8480bb7b ("ASoC: qdsp6: q6asm: Add support to audio stream apis") Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20200611124159.20742-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/qcom/qdsp6/q6asm.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c index 2b2c7233bb5f..1bdacf797613 100644 --- a/sound/soc/qcom/qdsp6/q6asm.c +++ b/sound/soc/qcom/qdsp6/q6asm.c @@ -25,6 +25,7 @@ #define ASM_STREAM_CMD_FLUSH 0x00010BCE #define ASM_SESSION_CMD_PAUSE 0x00010BD3 #define ASM_DATA_CMD_EOS 0x00010BDB +#define ASM_DATA_EVENT_RENDERED_EOS 0x00010C1C #define ASM_NULL_POPP_TOPOLOGY 0x00010C68 #define ASM_STREAM_CMD_FLUSH_READBUFS 0x00010C09 #define ASM_STREAM_CMD_SET_ENCDEC_PARAM 0x00010C10 @@ -545,9 +546,6 @@ static int32_t q6asm_stream_callback(struct apr_device *adev, case ASM_SESSION_CMD_SUSPEND: client_event = ASM_CLIENT_EVENT_CMD_SUSPEND_DONE; break; - case ASM_DATA_CMD_EOS: - client_event = ASM_CLIENT_EVENT_CMD_EOS_DONE; - break; case ASM_STREAM_CMD_FLUSH: client_event = ASM_CLIENT_EVENT_CMD_FLUSH_DONE; break; @@ -650,6 +648,9 @@ static int32_t q6asm_stream_callback(struct apr_device *adev, spin_unlock_irqrestore(&ac->lock, flags); } + break; + case ASM_DATA_EVENT_RENDERED_EOS: + client_event = ASM_CLIENT_EVENT_CMD_EOS_DONE; break; } -- cgit v1.2.3 From a717bbd11e3962e8144ef3e34a0533231dd2c409 Mon Sep 17 00:00:00 2001 From: Qiushi Wu Date: Thu, 28 May 2020 13:38:04 -0500 Subject: efi/esrt: Fix reference count leak in esre_create_sysfs_entry. [ Upstream commit 4ddf4739be6e375116c375f0a68bf3893ffcee21 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb718348b8" fixed a similar problem. Fixes: 0bb549052d33 ("efi: Add esrt support") Signed-off-by: Qiushi Wu Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.edu Signed-off-by: Ard Biesheuvel Signed-off-by: Sasha Levin --- drivers/firmware/efi/esrt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/efi/esrt.c b/drivers/firmware/efi/esrt.c index 5d06bd247d07..2f6204b2fdd3 100644 --- a/drivers/firmware/efi/esrt.c +++ b/drivers/firmware/efi/esrt.c @@ -180,7 +180,7 @@ static int esre_create_sysfs_entry(void *esre, int entry_num) rc = kobject_init_and_add(&entry->kobj, &esre1_ktype, NULL, "entry%d", entry_num); if (rc) { - kfree(entry); + kobject_put(&entry->kobj); return rc; } } -- cgit v1.2.3 From 7064f60157c8fc763fbf7e96a7ae89197ba45d4b Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Mon, 15 Jun 2020 05:54:08 +0800 Subject: regualtor: pfuze100: correct sw1a/sw2 on pfuze3000 [ Upstream commit 6f1cf5257acc6e6242ddf2f52bc7912aed77b79f ] PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG and pfuze100_sw_regulator_ops. Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a") Reported-by: Christophe Meynard Signed-off-by: Robin Gong Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/pfuze100-regulator.c | 60 ++++++++++++++++++++++------------ 1 file changed, 39 insertions(+), 21 deletions(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 69a377ab2604..30e92a9cc97e 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -196,6 +196,19 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = { }; +static const struct regulator_ops pfuze3000_sw_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = pfuze100_set_ramp_delay, + +}; + #define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \ [_chip ## _ ## _name] = { \ .desc = { \ @@ -305,23 +318,28 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x20, \ } - -#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \ - .desc = { \ - .name = #_name,\ - .n_voltages = ((max) - (min)) / (step) + 1, \ - .ops = &pfuze100_sw_regulator_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = _chip ## _ ## _name, \ - .owner = THIS_MODULE, \ - .min_uV = (min), \ - .uV_step = (step), \ - .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ - .vsel_mask = 0x7, \ - }, \ - .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ - .stby_mask = 0x7, \ -} +/* No linar case for the some switches of PFUZE3000 */ +#define PFUZE3000_SW_REG(_chip, _name, base, mask, voltages) \ + [_chip ## _ ## _name] = { \ + .desc = { \ + .name = #_name, \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pfuze3000_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = (mask), \ + .enable_reg = (base) + PFUZE100_MODE_OFFSET, \ + .enable_mask = 0xf, \ + .enable_val = 0x8, \ + .enable_time = 500, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = (mask), \ + .sw_reg = true, \ + } #define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \ .desc = { \ @@ -377,9 +395,9 @@ static struct pfuze_regulator pfuze200_regulators[] = { }; static struct pfuze_regulator pfuze3000_regulators[] = { - PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), + PFUZE3000_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), - PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst), PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), @@ -393,8 +411,8 @@ static struct pfuze_regulator pfuze3000_regulators[] = { }; static struct pfuze_regulator pfuze3001_regulators[] = { - PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), - PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), + PFUZE3000_SW_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), -- cgit v1.2.3 From 7a799de674c1064f213b91febe2a4c1e22688e0b Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Tue, 16 Jun 2020 10:53:48 +0800 Subject: ASoC: fsl_ssi: Fix bclk calculation for mono channel [ Upstream commit ed1220df6e666500ebf58c4f2fccc681941646fb ] For mono channel, SSI will switch to Normal mode. In Normal mode and Network mode, the Word Length Control bits control the word length divider in clock generator, which is different with I2S Master mode (the word length is fixed to 32bit), it should be the value of params_width(hw_params). The condition "slots == 2" is not good for I2S Master mode, because for Network mode and Normal mode, the slots can also be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) to check if it is I2S Master mode. So we refine the formula for mono channel, otherwise there will be sound issue for S24_LE. Fixes: b0a7043d5c2c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width") Signed-off-by: Shengjiu Wang Reviewed-by: Nicolin Chen Link: https://lore.kernel.org/r/034eff1435ff6ce300b6c781130cefd9db22ab9a.1592276147.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/fsl/fsl_ssi.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index d83be26d6446..0e2bdad373d6 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -678,8 +678,9 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, struct regmap *regs = ssi->regs; u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i; unsigned long clkrate, baudrate, tmprate; - unsigned int slots = params_channels(hw_params); - unsigned int slot_width = 32; + unsigned int channels = params_channels(hw_params); + unsigned int slot_width = params_width(hw_params); + unsigned int slots = 2; u64 sub, savesub = 100000; unsigned int freq; bool baudclk_is_used; @@ -688,10 +689,14 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, /* Override slots and slot_width if being specifically set... */ if (ssi->slots) slots = ssi->slots; - /* ...but keep 32 bits if slots is 2 -- I2S Master mode */ - if (ssi->slot_width && slots != 2) + if (ssi->slot_width) slot_width = ssi->slot_width; + /* ...but force 32 bits for stereo audio using I2S Master Mode */ + if (channels == 2 && + (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) == SSI_SCR_I2S_MODE_MASTER) + slot_width = 32; + /* Generate bit clock based on the slot number and slot width */ freq = slots * slot_width * params_rate(hw_params); -- cgit v1.2.3 From 17f09d91f86a3c028fd37742bb1149ebcb39768b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 12 Jun 2020 10:19:50 -0700 Subject: ARM: dts: Fix duovero smsc interrupt for suspend [ Upstream commit 9cf28e41f9f768791f54ee18333239fda6927ed8 ] While testing the recent suspend and resume regressions I noticed that duovero can still end up losing edge gpio interrupts on runtime suspend. This causes NFSroot easily stopping working after resume on duovero. Let's fix the issue by using gpio level interrupts for smsc as then the gpio interrupt state is seen by the gpio controller on resume. Fixes: 731b409878a3 ("ARM: dts: Configure duovero for to allow core retention during idle") Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin --- arch/arm/boot/dts/omap4-duovero-parlor.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index cfcac0d73851..93d6fb6db578 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -142,7 +142,7 @@ ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_EDGE_FALLING>; /* gpio_44 */ + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */ phy-mode = "mii"; -- cgit v1.2.3 From d4cd86a098fb34331032dcb35f882fc8bc8dafd3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 2 Jun 2020 22:36:11 +0300 Subject: x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get() [ Upstream commit cc5277fe66cf3ad68f41f1c539b2ef0d5e432974 ] The callers don't expect *d_cdp to be set to an error pointer, they only check for NULL. This leads to a static checker warning: arch/x86/kernel/cpu/resctrl/rdtgroup.c:2648 __init_one_rdt_domain() warn: 'd_cdp' could be an error pointer This would not trigger a bug in this specific case because __init_one_rdt_domain() calls it with a valid domain that would not have a negative id and thus not trigger the return of the ERR_PTR(). If this was a negative domain id then the call to rdt_find_domain() in domain_add_cpu() would have returned the ERR_PTR() much earlier and the creation of the domain with an invalid id would have been prevented. Even though a bug is not triggered currently the right and safe thing to do is to set the pointer to NULL because that is what can be checked for when the caller is handling the CDP and non-CDP cases. Fixes: 52eb74339a62 ("x86/resctrl: Fix rdt_find_domain() return value and checks") Signed-off-by: Dan Carpenter Signed-off-by: Borislav Petkov Acked-by: Reinette Chatre Acked-by: Fenghua Yu Link: https://lkml.kernel.org/r/20200602193611.GA190851@mwanda Signed-off-by: Sasha Levin --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index cea7e01a346d..e62e416dd116 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -1035,6 +1035,7 @@ static int rdt_cdp_peer_get(struct rdt_resource *r, struct rdt_domain *d, _d_cdp = rdt_find_domain(_r_cdp, d->id, NULL); if (WARN_ON(IS_ERR_OR_NULL(_d_cdp))) { _r_cdp = NULL; + _d_cdp = NULL; ret = -EINVAL; } -- cgit v1.2.3 From ef743e2786d154c766816ce2482c36c4fcdd7379 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 17 Jun 2020 16:21:29 +0100 Subject: regmap: Fix memory leak from regmap_register_patch [ Upstream commit 95b2c3ec4cb1689db2389c251d39f64490ba641c ] When a register patch is registered the reg_sequence is copied but the memory allocated is never freed. Add a kfree in regmap_exit to clean it up. Fixes: 22f0d90a3482 ("regmap: Support register patch sets") Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/base/regmap/regmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 6c9f6988bc09..b38b2d8c333d 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1336,6 +1336,7 @@ void regmap_exit(struct regmap *map) if (map->hwlock) hwspin_lock_free(map->hwlock); kfree_const(map->name); + kfree(map->patch); kfree(map); } EXPORT_SYMBOL_GPL(regmap_exit); -- cgit v1.2.3 From 0f29174030fa7beb532cf253c61cf961a59d5970 Mon Sep 17 00:00:00 2001 From: Matthew Hagan Date: Sun, 14 Jun 2020 15:19:00 -0700 Subject: ARM: dts: NSP: Correct FA2 mailbox node [ Upstream commit ac4e106d8934a5894811fc263f4b03fc8ed0fb7a ] The FA2 mailbox is specified at 0x18025000 but should actually be 0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also the interrupt was off by one and should be GIC SPI 151 instead of 150. Fixes: 17d517172300 ("ARM: dts: NSP: Add mailbox (PDC) to NSP") Signed-off-by: Matthew Hagan Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin --- arch/arm/boot/dts/bcm-nsp.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 2b219addeb44..273a31604579 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -249,10 +249,10 @@ status = "disabled"; }; - mailbox: mailbox@25000 { + mailbox: mailbox@25c00 { compatible = "brcm,iproc-fa2-mbox"; - reg = <0x25000 0x445>; - interrupts = ; + reg = <0x25c00 0x400>; + interrupts = ; #mbox-cells = <1>; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; -- cgit v1.2.3 From 62745e57440e3dc3b60f2d67a0aa0ff83b7a2bcb Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Jun 2020 23:01:23 +0100 Subject: rxrpc: Fix handling of rwind from an ACK packet [ Upstream commit a2ad7c21ad8cf1ce4ad65e13df1c2a1c29b38ac5 ] The handling of the receive window size (rwind) from a received ACK packet is not correct. The rxrpc_input_ackinfo() function currently checks the current Tx window size against the rwind from the ACK to see if it has changed, but then limits the rwind size before storing it in the tx_winsize member and, if it increased, wake up the transmitting process. This means that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be followed. Fix this by limiting rwind before we compare it to tx_winsize. The effect of this can be seen by enabling the rxrpc_rx_rwind_change tracepoint. Fixes: 702f2ac87a9a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer") Signed-off-by: David Howells Signed-off-by: Sasha Levin --- net/rxrpc/input.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index e65b230fce4c..58bd558a277a 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -735,13 +735,12 @@ static void rxrpc_input_ackinfo(struct rxrpc_call *call, struct sk_buff *skb, ntohl(ackinfo->rxMTU), ntohl(ackinfo->maxMTU), rwind, ntohl(ackinfo->jumbo_max)); + if (rwind > RXRPC_RXTX_BUFF_SIZE - 1) + rwind = RXRPC_RXTX_BUFF_SIZE - 1; if (call->tx_winsize != rwind) { - if (rwind > RXRPC_RXTX_BUFF_SIZE - 1) - rwind = RXRPC_RXTX_BUFF_SIZE - 1; if (rwind > call->tx_winsize) wake = true; - trace_rxrpc_rx_rwind_change(call, sp->hdr.serial, - ntohl(ackinfo->rwind), wake); + trace_rxrpc_rx_rwind_change(call, sp->hdr.serial, rwind, wake); call->tx_winsize = rwind; } -- cgit v1.2.3 From 51a544f05b056d805cbd5a3bd5693fd1530b1ef6 Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Tue, 16 Jun 2020 12:34:08 +0300 Subject: RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532 [ Upstream commit 0dfbd5ecf28cbcb81674c49d34ee97366db1be44 ] Private data passed to iwarp_cm_handler is copied for connection request / response, but ignored otherwise. If junk is passed, it is stored in the event and used later in the event processing. The driver passes an old junk pointer during connection close which leads to a use-after-free on event processing. Set private data to NULL for events that don 't have private data. BUG: KASAN: use-after-free in ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: Read of size 4 at addr ffff8886caa71200 by task kworker/u128:1/5250 kernel: kernel: Workqueue: iw_cm_wq cm_work_handler [iw_cm] kernel: Call Trace: kernel: dump_stack+0x8c/0xc0 kernel: print_address_description.constprop.0+0x1b/0x210 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: __kasan_report.cold+0x1a/0x33 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: kasan_report+0xe/0x20 kernel: check_memory_region+0x130/0x1a0 kernel: memcpy+0x20/0x50 kernel: ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? __rpc_execute+0x608/0x620 [sunrpc] kernel: cma_iw_handler+0x212/0x330 [rdma_cm] kernel: ? iw_conn_req_handler+0x6e0/0x6e0 [rdma_cm] kernel: ? enqueue_timer+0x86/0x140 kernel: ? _raw_write_lock_irq+0xd0/0xd0 kernel: cm_work_handler+0xd3d/0x1070 [iw_cm] Fixes: e411e0587e0d ("RDMA/qedr: Add iWARP connection management functions") Link: https://lore.kernel.org/r/20200616093408.17827-1-michal.kalderon@marvell.com Signed-off-by: Ariel Elior Signed-off-by: Michal Kalderon Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/hw/qedr/qedr_iw_cm.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/qedr/qedr_iw_cm.c b/drivers/infiniband/hw/qedr/qedr_iw_cm.c index 93b16237b767..256671577367 100644 --- a/drivers/infiniband/hw/qedr/qedr_iw_cm.c +++ b/drivers/infiniband/hw/qedr/qedr_iw_cm.c @@ -128,8 +128,17 @@ qedr_iw_issue_event(void *context, if (params->cm_info) { event.ird = params->cm_info->ird; event.ord = params->cm_info->ord; - event.private_data_len = params->cm_info->private_data_len; - event.private_data = (void *)params->cm_info->private_data; + /* Only connect_request and reply have valid private data + * the rest of the events this may be left overs from + * connection establishment. CONNECT_REQUEST is issued via + * qedr_iw_mpa_request + */ + if (event_type == IW_CM_EVENT_CONNECT_REPLY) { + event.private_data_len = + params->cm_info->private_data_len; + event.private_data = + (void *)params->cm_info->private_data; + } } if (ep->cm_id) -- cgit v1.2.3 From a62f833055c7adbb01d8765a92f7bdf218d86697 Mon Sep 17 00:00:00 2001 From: Mark Zhang Date: Tue, 16 Jun 2020 13:43:04 +0300 Subject: RDMA/cma: Protect bind_list and listen_list while finding matching cm id [ Upstream commit 730c8912484186d4623d0c76509066d285c3a755 ] The bind_list and listen_list must be accessed under a lock, add the missing locking around the access in cm_ib_id_from_event() In addition add lockdep asserts to make it clearer what the locking semantic is here. general protection fault: 0000 [#1] SMP NOPTI CPU: 226 PID: 126135 Comm: kworker/226:1 Tainted: G OE 4.12.14-150.47-default #1 SLE15 Hardware name: Cray Inc. Windom/Windom, BIOS 0.8.7 01-10-2020 Workqueue: ib_cm cm_work_handler [ib_cm] task: ffff9c5a60a1d2c0 task.stack: ffffc1d91f554000 RIP: 0010:cma_ib_req_handler+0x3f1/0x11b0 [rdma_cm] RSP: 0018:ffffc1d91f557b40 EFLAGS: 00010286 RAX: deacffffffffff30 RBX: 0000000000000001 RCX: ffff9c2af5bb6000 RDX: 00000000000000a9 RSI: ffff9c5aa4ed2f10 RDI: ffffc1d91f557b08 RBP: ffffc1d91f557d90 R08: ffff9c340cc80000 R09: ffff9c2c0f901900 R10: 0000000000000000 R11: 0000000000000001 R12: deacffffffffff30 R13: ffff9c5a48aeec00 R14: ffffc1d91f557c30 R15: ffff9c5c2eea3688 FS: 0000000000000000(0000) GS:ffff9c5c2fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002b5cc03fa320 CR3: 0000003f8500a000 CR4: 00000000003406e0 Call Trace: ? rdma_addr_cancel+0xa0/0xa0 [ib_core] ? cm_process_work+0x28/0x140 [ib_cm] cm_process_work+0x28/0x140 [ib_cm] ? cm_get_bth_pkey.isra.44+0x34/0xa0 [ib_cm] cm_work_handler+0xa06/0x1a6f [ib_cm] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to+0x7c/0x4b0 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 process_one_work+0x1da/0x400 worker_thread+0x2b/0x3f0 ? process_one_work+0x400/0x400 kthread+0x118/0x140 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x40 Code: 00 66 83 f8 02 0f 84 ca 05 00 00 49 8b 84 24 d0 01 00 00 48 85 c0 0f 84 68 07 00 00 48 2d d0 01 00 00 49 89 c4 0f 84 59 07 00 00 <41> 0f b7 44 24 20 49 8b 77 50 66 83 f8 0a 75 9e 49 8b 7c 24 28 Fixes: 4c21b5bcef73 ("IB/cma: Add net_dev and private data checks to RDMA CM") Link: https://lore.kernel.org/r/20200616104304.2426081-1-leon@kernel.org Signed-off-by: Mark Zhang Reviewed-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/core/cma.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 5c03f4701ece..1f14cd4ce3db 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1507,6 +1507,8 @@ static struct rdma_id_private *cma_find_listener( { struct rdma_id_private *id_priv, *id_priv_dev; + lockdep_assert_held(&lock); + if (!bind_list) return ERR_PTR(-EINVAL); @@ -1552,6 +1554,7 @@ cma_ib_id_from_event(struct ib_cm_id *cm_id, } } + mutex_lock(&lock); /* * Net namespace might be getting deleted while route lookup, * cm_id lookup is in progress. Therefore, perform netdevice @@ -1593,6 +1596,7 @@ cma_ib_id_from_event(struct ib_cm_id *cm_id, id_priv = cma_find_listener(bind_list, cm_id, ib_event, &req, *net_dev); err: rcu_read_unlock(); + mutex_unlock(&lock); if (IS_ERR(id_priv) && *net_dev) { dev_put(*net_dev); *net_dev = NULL; @@ -2346,6 +2350,8 @@ static void cma_listen_on_dev(struct rdma_id_private *id_priv, struct net *net = id_priv->id.route.addr.dev_addr.net; int ret; + lockdep_assert_held(&lock); + if (cma_family(id_priv) == AF_IB && !rdma_cap_ib_cm(cma_dev->device, 1)) return; @@ -3081,6 +3087,8 @@ static void cma_bind_port(struct rdma_bind_list *bind_list, u64 sid, mask; __be16 port; + lockdep_assert_held(&lock); + addr = cma_src_addr(id_priv); port = htons(bind_list->port); @@ -3109,6 +3117,8 @@ static int cma_alloc_port(enum rdma_ucm_port_space ps, struct rdma_bind_list *bind_list; int ret; + lockdep_assert_held(&lock); + bind_list = kzalloc(sizeof *bind_list, GFP_KERNEL); if (!bind_list) return -ENOMEM; @@ -3135,6 +3145,8 @@ static int cma_port_is_unique(struct rdma_bind_list *bind_list, struct sockaddr *saddr = cma_src_addr(id_priv); __be16 dport = cma_port(daddr); + lockdep_assert_held(&lock); + hlist_for_each_entry(cur_id, &bind_list->owners, node) { struct sockaddr *cur_daddr = cma_dst_addr(cur_id); struct sockaddr *cur_saddr = cma_src_addr(cur_id); @@ -3174,6 +3186,8 @@ static int cma_alloc_any_port(enum rdma_ucm_port_space ps, unsigned int rover; struct net *net = id_priv->id.route.addr.dev_addr.net; + lockdep_assert_held(&lock); + inet_get_local_port_range(net, &low, &high); remaining = (high - low) + 1; rover = prandom_u32() % remaining + low; @@ -3221,6 +3235,8 @@ static int cma_check_port(struct rdma_bind_list *bind_list, struct rdma_id_private *cur_id; struct sockaddr *addr, *cur_addr; + lockdep_assert_held(&lock); + addr = cma_src_addr(id_priv); hlist_for_each_entry(cur_id, &bind_list->owners, node) { if (id_priv == cur_id) @@ -3251,6 +3267,8 @@ static int cma_use_port(enum rdma_ucm_port_space ps, unsigned short snum; int ret; + lockdep_assert_held(&lock); + snum = ntohs(cma_port(cma_src_addr(id_priv))); if (snum < PROT_SOCK && !capable(CAP_NET_BIND_SERVICE)) return -EACCES; -- cgit v1.2.3 From df5888912859c26b9d7cb825eb26920f5e0f9c67 Mon Sep 17 00:00:00 2001 From: Qiushi Wu Date: Sat, 13 Jun 2020 15:51:58 -0500 Subject: ASoC: rockchip: Fix a reference count leak. [ Upstream commit f141a422159a199f4c8dedb7e0df55b3b2cf16cd ] Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails. Fixes: fc05a5b22253 ("ASoC: rockchip: add support for pdm controller") Signed-off-by: Qiushi Wu Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200613205158.27296-1-wu000273@umn.edu Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/rockchip/rockchip_pdm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/rockchip/rockchip_pdm.c b/sound/soc/rockchip/rockchip_pdm.c index 8a2e3bbce3a1..ad16c8310dd3 100644 --- a/sound/soc/rockchip/rockchip_pdm.c +++ b/sound/soc/rockchip/rockchip_pdm.c @@ -478,8 +478,10 @@ static int rockchip_pdm_resume(struct device *dev) int ret; ret = pm_runtime_get_sync(dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(dev); return ret; + } ret = regcache_sync(pdm->regmap); -- cgit v1.2.3 From d6d76e02802865ac710145f7b9f2ae6c0aa0415c Mon Sep 17 00:00:00 2001 From: Fan Guo Date: Fri, 12 Jun 2020 14:38:24 +0800 Subject: RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads() [ Upstream commit a17f4bed811c60712d8131883cdba11a105d0161 ] If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f4261 ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.com Signed-off-by: Fan Guo Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/core/mad.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index cd82134d517b..a36b3b4f5c0a 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -2920,6 +2920,7 @@ static int ib_mad_post_receive_mads(struct ib_mad_qp_info *qp_info, DMA_FROM_DEVICE); if (unlikely(ib_dma_mapping_error(qp_info->port_priv->device, sg_list.addr))) { + kfree(mad_priv); ret = -ENOMEM; break; } -- cgit v1.2.3 From d10d0539c52e71f03f227c88a3225b052273dc0a Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:29 +0300 Subject: net: qed: fix left elements count calculation [ Upstream commit 97dd1abd026ae4e6a82fa68645928404ad483409 ] qed_chain_get_element_left{,_u32} returned 0 when the difference between producer and consumer page count was equal to the total page count. Fix this by conditional expanding of producer value (vs unconditional). This allowed to eliminate normalizaton against total page count, which was the cause of this bug. Misc: replace open-coded constants with common defines. Fixes: a91eb52abb50 ("qed: Revisit chain implementation") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- include/linux/qed/qed_chain.h | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/include/linux/qed/qed_chain.h b/include/linux/qed/qed_chain.h index 733fad7dfbed..6d15040c642c 100644 --- a/include/linux/qed/qed_chain.h +++ b/include/linux/qed/qed_chain.h @@ -207,28 +207,34 @@ static inline u32 qed_chain_get_cons_idx_u32(struct qed_chain *p_chain) static inline u16 qed_chain_get_elem_left(struct qed_chain *p_chain) { + u16 elem_per_page = p_chain->elem_per_page; + u32 prod = p_chain->u.chain16.prod_idx; + u32 cons = p_chain->u.chain16.cons_idx; u16 used; - used = (u16) (((u32)0x10000 + - (u32)p_chain->u.chain16.prod_idx) - - (u32)p_chain->u.chain16.cons_idx); + if (prod < cons) + prod += (u32)U16_MAX + 1; + + used = (u16)(prod - cons); if (p_chain->mode == QED_CHAIN_MODE_NEXT_PTR) - used -= p_chain->u.chain16.prod_idx / p_chain->elem_per_page - - p_chain->u.chain16.cons_idx / p_chain->elem_per_page; + used -= prod / elem_per_page - cons / elem_per_page; return (u16)(p_chain->capacity - used); } static inline u32 qed_chain_get_elem_left_u32(struct qed_chain *p_chain) { + u16 elem_per_page = p_chain->elem_per_page; + u64 prod = p_chain->u.chain32.prod_idx; + u64 cons = p_chain->u.chain32.cons_idx; u32 used; - used = (u32) (((u64)0x100000000ULL + - (u64)p_chain->u.chain32.prod_idx) - - (u64)p_chain->u.chain32.cons_idx); + if (prod < cons) + prod += (u64)U32_MAX + 1; + + used = (u32)(prod - cons); if (p_chain->mode == QED_CHAIN_MODE_NEXT_PTR) - used -= p_chain->u.chain32.prod_idx / p_chain->elem_per_page - - p_chain->u.chain32.cons_idx / p_chain->elem_per_page; + used -= (u32)(prod / elem_per_page - cons / elem_per_page); return p_chain->capacity - used; } -- cgit v1.2.3 From d6f02b445f7ccfeb0061a88ea0d38f369f869641 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:32 +0300 Subject: net: qed: fix NVMe login fails over VFs [ Upstream commit ccd7c7ce167a21dbf2b698ffcf00f11d96d44f9b ] 25ms sleep cycles in waiting for PF response are excessive and may lead to different timeout failures. Start to wait with short udelays, and in most cases polling will end here. If the time was not sufficient, switch to msleeps. usleep_range() may go far beyond 100us depending on platform and tick configuration, hence atomic udelays for consistency. Also add explicit DMA barriers since 'done' always comes from a shared request-response DMA pool, and note that in the comment nearby. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/qlogic/qed/qed_vf.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c index 5dda547772c1..93a0fbf6a132 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_vf.c +++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c @@ -81,12 +81,17 @@ static void qed_vf_pf_req_end(struct qed_hwfn *p_hwfn, int req_status) mutex_unlock(&(p_hwfn->vf_iov_info->mutex)); } +#define QED_VF_CHANNEL_USLEEP_ITERATIONS 90 +#define QED_VF_CHANNEL_USLEEP_DELAY 100 +#define QED_VF_CHANNEL_MSLEEP_ITERATIONS 10 +#define QED_VF_CHANNEL_MSLEEP_DELAY 25 + static int qed_send_msg2pf(struct qed_hwfn *p_hwfn, u8 *done, u32 resp_size) { union vfpf_tlvs *p_req = p_hwfn->vf_iov_info->vf2pf_request; struct ustorm_trigger_vf_zone trigger; struct ustorm_vf_zone *zone_data; - int rc = 0, time = 100; + int iter, rc = 0; zone_data = (struct ustorm_vf_zone *)PXP_VF_BAR0_START_USDM_ZONE_B; @@ -126,11 +131,19 @@ static int qed_send_msg2pf(struct qed_hwfn *p_hwfn, u8 *done, u32 resp_size) REG_WR(p_hwfn, (uintptr_t)&zone_data->trigger, *((u32 *)&trigger)); /* When PF would be done with the response, it would write back to the - * `done' address. Poll until then. + * `done' address from a coherent DMA zone. Poll until then. */ - while ((!*done) && time) { - msleep(25); - time--; + + iter = QED_VF_CHANNEL_USLEEP_ITERATIONS; + while (!*done && iter--) { + udelay(QED_VF_CHANNEL_USLEEP_DELAY); + dma_rmb(); + } + + iter = QED_VF_CHANNEL_MSLEEP_ITERATIONS; + while (!*done && iter--) { + msleep(QED_VF_CHANNEL_MSLEEP_DELAY); + dma_rmb(); } if (!*done) { -- cgit v1.2.3 From 34931cf6c9929a6a5513cb4baef0965ee70a1275 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 16:51:33 +0300 Subject: net: qed: fix excessive QM ILT lines consumption [ Upstream commit d434d02f7e7c24c721365fd594ed781acb18e0da ] This is likely a copy'n'paste mistake. The amount of ILT lines to reserve for a single VF was being multiplied by the total VFs count. This led to a huge redundancy in reservation and potential lines drainouts. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c index f1977aa440e5..f3d7c38f539a 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -397,7 +397,7 @@ static void qed_cxt_qm_iids(struct qed_hwfn *p_hwfn, vf_tids += segs[NUM_TASK_PF_SEGMENTS].count; } - iids->vf_cids += vf_cids * p_mngr->vf_count; + iids->vf_cids = vf_cids; iids->tids += vf_tids * p_mngr->vf_count; DP_VERBOSE(p_hwfn, QED_MSG_ILT, -- cgit v1.2.3 From 10ecd2348fb5b4896a52283bdc06542b6342221d Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Wed, 24 Jun 2020 01:51:31 +0530 Subject: cxgb4: move handling L2T ARP failures to caller [ Upstream commit 11d8cd5c9f3b46f397f889cefdb66795518aaebd ] Move code handling L2T ARP failures to the only caller. Fixes following sparse warning: skbuff.h:2091:29: warning: context imbalance in 'handle_failed_resolution' - unexpected unlock Fixes: 749cb5fe48bb ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/chelsio/cxgb4/l2t.c | 52 +++++++++++++++----------------- 1 file changed, 24 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c index 986277744611..08f4780e7fe7 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c +++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c @@ -507,41 +507,20 @@ u64 cxgb4_select_ntuple(struct net_device *dev, } EXPORT_SYMBOL(cxgb4_select_ntuple); -/* - * Called when address resolution fails for an L2T entry to handle packets - * on the arpq head. If a packet specifies a failure handler it is invoked, - * otherwise the packet is sent to the device. - */ -static void handle_failed_resolution(struct adapter *adap, struct l2t_entry *e) -{ - struct sk_buff *skb; - - while ((skb = __skb_dequeue(&e->arpq)) != NULL) { - const struct l2t_skb_cb *cb = L2T_SKB_CB(skb); - - spin_unlock(&e->lock); - if (cb->arp_err_handler) - cb->arp_err_handler(cb->handle, skb); - else - t4_ofld_send(adap, skb); - spin_lock(&e->lock); - } -} - /* * Called when the host's neighbor layer makes a change to some entry that is * loaded into the HW L2 table. */ void t4_l2t_update(struct adapter *adap, struct neighbour *neigh) { - struct l2t_entry *e; - struct sk_buff_head *arpq = NULL; - struct l2t_data *d = adap->l2t; unsigned int addr_len = neigh->tbl->key_len; u32 *addr = (u32 *) neigh->primary_key; - int ifidx = neigh->dev->ifindex; - int hash = addr_hash(d, addr, addr_len, ifidx); + int hash, ifidx = neigh->dev->ifindex; + struct sk_buff_head *arpq = NULL; + struct l2t_data *d = adap->l2t; + struct l2t_entry *e; + hash = addr_hash(d, addr, addr_len, ifidx); read_lock_bh(&d->lock); for (e = d->l2tab[hash].first; e; e = e->next) if (!addreq(e, addr) && e->ifindex == ifidx) { @@ -574,8 +553,25 @@ void t4_l2t_update(struct adapter *adap, struct neighbour *neigh) write_l2e(adap, e, 0); } - if (arpq) - handle_failed_resolution(adap, e); + if (arpq) { + struct sk_buff *skb; + + /* Called when address resolution fails for an L2T + * entry to handle packets on the arpq head. If a + * packet specifies a failure handler it is invoked, + * otherwise the packet is sent to the device. + */ + while ((skb = __skb_dequeue(&e->arpq)) != NULL) { + const struct l2t_skb_cb *cb = L2T_SKB_CB(skb); + + spin_unlock(&e->lock); + if (cb->arp_err_handler) + cb->arp_err_handler(cb->handle, skb); + else + t4_ofld_send(adap, skb); + spin_lock(&e->lock); + } + } spin_unlock_bh(&e->lock); } -- cgit v1.2.3 From f5e4ce482e22f0d5359a39880c155cc4ca2f4455 Mon Sep 17 00:00:00 2001 From: yu kuai Date: Thu, 4 Jun 2020 20:42:06 +0800 Subject: ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() [ Upstream commit 586745f1598ccf71b0a5a6df2222dee0a865954e ] if of_find_device_by_node() succeed, imx_suspend_alloc_ocram() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 1579c7b9fe01 ("ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.") Signed-off-by: yu kuai Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm/mach-imx/pm-imx5.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 868781fd460c..14c630c899c5 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -301,14 +301,14 @@ static int __init imx_suspend_alloc_ocram( if (!ocram_pool) { pr_warn("%s: ocram pool unavailable!\n", __func__); ret = -ENODEV; - goto put_node; + goto put_device; } ocram_base = gen_pool_alloc(ocram_pool, size); if (!ocram_base) { pr_warn("%s: unable to alloc ocram!\n", __func__); ret = -ENOMEM; - goto put_node; + goto put_device; } phys = gen_pool_virt_to_phys(ocram_pool, ocram_base); @@ -318,6 +318,8 @@ static int __init imx_suspend_alloc_ocram( if (virt_out) *virt_out = virt; +put_device: + put_device(&pdev->dev); put_node: of_node_put(node); -- cgit v1.2.3 From 5034b1fdb0ca35c8c092db4457d4ca1c2f472626 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 15 Jun 2020 14:27:19 +0300 Subject: usb: gadget: udc: Potential Oops in error handling code [ Upstream commit e55f3c37cb8d31c7e301f46396b2ac6a19eb3a7c ] If this is in "transceiver" mode the the ->qwork isn't required and is a NULL pointer. This can lead to a NULL dereference when we call destroy_workqueue(udc->qwork). Fixes: 3517c31a8ece ("usb: gadget: mv_udc: use devm_xxx for probe") Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin --- drivers/usb/gadget/udc/mv_udc_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c index 95f52232493b..83e98b59910e 100644 --- a/drivers/usb/gadget/udc/mv_udc_core.c +++ b/drivers/usb/gadget/udc/mv_udc_core.c @@ -2313,7 +2313,8 @@ static int mv_udc_probe(struct platform_device *pdev) return 0; err_create_workqueue: - destroy_workqueue(udc->qwork); + if (udc->qwork) + destroy_workqueue(udc->qwork); err_destroy_dma: dma_pool_destroy(udc->dtd_pool); err_free_dma: -- cgit v1.2.3 From b34e578f36b9d70f487cc97b52ab44b0748d00d7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 10 Jun 2020 21:51:11 +0100 Subject: netfilter: ipset: fix unaligned atomic access [ Upstream commit 715028460082d07a7ec6fcd87b14b46784346a72 ] When using ip_set with counters and comment, traffic causes the kernel to panic on 32-bit ARM: Alignment trap: not handling instruction e1b82f9f at [] Unhandled fault: alignment exception (0x221) at 0xea08133c PC is at ip_set_match_extensions+0xe0/0x224 [ip_set] The problem occurs when we try to update the 64-bit counters - the faulting address above is not 64-bit aligned. The problem occurs due to the way elements are allocated, for example: set->dsize = ip_set_elem_len(set, tb, 0, 0); map = ip_set_alloc(sizeof(*map) + elements * set->dsize); If the element has a requirement for a member to be 64-bit aligned, and set->dsize is not a multiple of 8, but is a multiple of four, then every odd numbered elements will be misaligned - and hitting an atomic64_add() on that element will cause the kernel to panic. ip_set_elem_len() must return a size that is rounded to the maximum alignment of any extension field stored in the element. This change ensures that is the case. Fixes: 95ad1f4a9358 ("netfilter: ipset: Fix extension alignment") Signed-off-by: Russell King Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/ipset/ip_set_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 21eb53f6d4fe..36ebc40a4313 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -385,6 +385,8 @@ ip_set_elem_len(struct ip_set *set, struct nlattr *tb[], size_t len, for (id = 0; id < IPSET_EXT_ID_MAX; id++) { if (!add_extension(id, cadt_flags, tb)) continue; + if (align < ip_set_extensions[id].align) + align = ip_set_extensions[id].align; len = ALIGN(len, ip_set_extensions[id].align); set->offset[id] = len; set->extensions |= ip_set_extensions[id].type; -- cgit v1.2.3 From d0dac4ebc8616fa4f2be0794e1b12cf196fdb472 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Wed, 24 Jun 2020 18:14:55 -0700 Subject: net: bcmgenet: use hardware padding of runt frames [ Upstream commit 20d1f2d1b024f6be199a3bedf1578a1d21592bc5 ] When commit 474ea9cafc45 ("net: bcmgenet: correctly pad short packets") added the call to skb_padto() it should have been located before the nr_frags parameter was read since that value could be changed when padding packets with lengths between 55 and 59 bytes (inclusive). The use of a stale nr_frags value can cause corruption of the pad data when tx-scatter-gather is enabled. This corruption of the pad can cause invalid checksum computation when hardware offload of tx-checksum is also enabled. Since the original reason for the padding was corrected by commit 7dd399130efb ("net: bcmgenet: fix skb_len in bcmgenet_xmit_single()") we can remove the software padding all together and make use of hardware padding of short frames as long as the hardware also always appends the FCS value to the frame. Fixes: 474ea9cafc45 ("net: bcmgenet: correctly pad short packets") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 40e8ef984b62..c7667017c1a3 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1593,11 +1593,6 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev) goto out; } - if (skb_padto(skb, ETH_ZLEN)) { - ret = NETDEV_TX_OK; - goto out; - } - /* Retain how many bytes will be sent on the wire, without TSB inserted * by transmit checksum offload */ @@ -1646,6 +1641,9 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev) len_stat = (size << DMA_BUFLENGTH_SHIFT) | (priv->hw_params->qtag_mask << DMA_TX_QTAG_SHIFT); + /* Note: if we ever change from DMA_TX_APPEND_CRC below we + * will need to restore software padding of "runt" packets + */ if (!i) { len_stat |= DMA_TX_APPEND_CRC | DMA_SOP; if (skb->ip_summed == CHECKSUM_PARTIAL) -- cgit v1.2.3 From 1cf0d9a73619252bb20cb45eabfd1c0a93dc8345 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 9 Jun 2020 15:15:54 -0500 Subject: i2c: fsi: Fix the port number field in status register [ Upstream commit 502035e284cc7e9efef22b01771d822d49698ab9 ] The port number field in the status register was not correct, so fix it. Fixes: d6ffb6300116 ("i2c: Add FSI-attached I2C master algorithm") Signed-off-by: Eddie James Signed-off-by: Joel Stanley Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-fsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c index 1e2be2219a60..46aef609fb70 100644 --- a/drivers/i2c/busses/i2c-fsi.c +++ b/drivers/i2c/busses/i2c-fsi.c @@ -98,7 +98,7 @@ #define I2C_STAT_DAT_REQ BIT(25) #define I2C_STAT_CMD_COMP BIT(24) #define I2C_STAT_STOP_ERR BIT(23) -#define I2C_STAT_MAX_PORT GENMASK(19, 16) +#define I2C_STAT_MAX_PORT GENMASK(22, 16) #define I2C_STAT_ANY_INT BIT(15) #define I2C_STAT_SCL_IN BIT(11) #define I2C_STAT_SDA_IN BIT(10) -- cgit v1.2.3 From 250b26bb889220bb2bf671cb2e4890cdb6f12714 Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Sat, 13 Jun 2020 11:41:09 +0100 Subject: i2c: core: check returned size of emulated smbus block read [ Upstream commit 40e05200593af06633f64ab0effff052eee6f076 ] If the i2c bus driver ignores the I2C_M_RECV_LEN flag (as some of them do), it is possible for an I2C_SMBUS_BLOCK_DATA read issued on some random device to return an arbitrary value in the first byte (and nothing else). When this happens, i2c_smbus_xfer_emulated() will happily write past the end of the supplied data buffer, thus causing Bad Things to happen. To prevent this, check the size before copying the data block and return an error if it is too large. Fixes: 209d27c3b167 ("i2c: Emulate SMBus block read over I2C") Signed-off-by: Mans Rullgard [wsa: use better errno] Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/i2c-core-smbus.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 9cd66cabb84f..8d6fad05b0c7 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -497,6 +497,13 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_BLOCK_PROC_CALL: + if (msg[1].buf[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, + "Invalid block size returned: %d\n", + msg[1].buf[0]); + status = -EPROTO; + goto cleanup; + } for (i = 0; i < msg[1].buf[0] + 1; i++) data->block[i] = msg[1].buf[i]; break; -- cgit v1.2.3 From edf55b5e3bde2fdba1a304b8e069154a4312f566 Mon Sep 17 00:00:00 2001 From: Juri Lelli Date: Wed, 17 Jun 2020 09:29:19 +0200 Subject: sched/deadline: Initialize ->dl_boosted [ Upstream commit ce9bc3b27f2a21a7969b41ffb04df8cf61bd1592 ] syzbot reported the following warning triggered via SYSC_sched_setattr(): WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 setup_new_dl_entity /kernel/sched/deadline.c:594 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_dl_entity /kernel/sched/deadline.c:1370 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_task_dl+0x1c17/0x2ba0 /kernel/sched/deadline.c:1441 This happens because the ->dl_boosted flag is currently not initialized by __dl_clear_params() (unlike the other flags) and setup_new_dl_entity() rightfully complains about it. Initialize dl_boosted to 0. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+5ac8bac25f95e8b221e7@syzkaller.appspotmail.com Signed-off-by: Juri Lelli Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Tested-by: Daniel Wagner Link: https://lkml.kernel.org/r/20200617072919.818409-1-juri.lelli@redhat.com Signed-off-by: Sasha Levin --- kernel/sched/deadline.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c index ebec37cb3be9..8aecfb143859 100644 --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -2688,6 +2688,7 @@ void __dl_clear_params(struct task_struct *p) dl_se->dl_bw = 0; dl_se->dl_density = 0; + dl_se->dl_boosted = 0; dl_se->dl_throttled = 0; dl_se->dl_yielded = 0; dl_se->dl_non_contending = 0; -- cgit v1.2.3 From e852bdcce9e41c26127e4b919210e3445590a1a4 Mon Sep 17 00:00:00 2001 From: Juri Lelli Date: Mon, 19 Nov 2018 16:32:01 +0100 Subject: sched/core: Fix PI boosting between RT and DEADLINE tasks [ Upstream commit 740797ce3a124b7dd22b7fb832d87bc8fba1cf6f ] syzbot reported the following warning: WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628 enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504 At deadline.c:628 we have: 623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se) 624 { 625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se); 626 struct rq *rq = rq_of_dl_rq(dl_rq); 627 628 WARN_ON(dl_se->dl_boosted); 629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline)); [...] } Which means that setup_new_dl_entity() has been called on a task currently boosted. This shouldn't happen though, as setup_new_dl_entity() is only called when the 'dynamic' deadline of the new entity is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this condition. Digging through the PI code I noticed that what above might in fact happen if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the first branch of boosting conditions we check only if a pi_task 'dynamic' deadline is earlier than mutex holder's and in this case we set mutex holder to be dl_boosted. However, since RT 'dynamic' deadlines are only initialized if such tasks get boosted at some point (or if they become DEADLINE of course), in general RT 'dynamic' deadlines are usually equal to 0 and this verifies the aforementioned condition. Fix it by checking that the potential donor task is actually (even if temporary because in turn boosted) running at DEADLINE priority before using its 'dynamic' deadline value. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com Signed-off-by: Juri Lelli Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Reviewed-by: Daniel Bristot de Oliveira Tested-by: Daniel Wagner Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain Signed-off-by: Sasha Levin --- kernel/sched/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 0325ccf3a8e4..843394d0ea42 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -3862,7 +3862,8 @@ void rt_mutex_setprio(struct task_struct *p, struct task_struct *pi_task) */ if (dl_prio(prio)) { if (!dl_prio(p->normal_prio) || - (pi_task && dl_entity_preempt(&pi_task->dl, &p->dl))) { + (pi_task && dl_prio(pi_task->prio) && + dl_entity_preempt(&pi_task->dl, &p->dl))) { p->dl.dl_boosted = 1; queue_flag |= ENQUEUE_REPLENISH; } else -- cgit v1.2.3 From 0947f6f6254c434fc57d1a3f0358bb80967ceb01 Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Thu, 4 Jun 2020 22:06:43 -0500 Subject: sata_rcar: handle pm_runtime_get_sync failure cases [ Upstream commit eea1238867205b9e48a67c1a63219529a73c46fd ] Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Navid Emamdoost Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin --- drivers/ata/sata_rcar.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 03867f539f3a..50ebd779d975 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -909,7 +909,7 @@ static int sata_rcar_probe(struct platform_device *pdev) pm_runtime_enable(dev); ret = pm_runtime_get_sync(dev); if (ret < 0) - goto err_pm_disable; + goto err_pm_put; host = ata_host_alloc(dev, 1); if (!host) { @@ -940,7 +940,6 @@ static int sata_rcar_probe(struct platform_device *pdev) err_pm_put: pm_runtime_put(dev); -err_pm_disable: pm_runtime_disable(dev); return ret; } @@ -994,8 +993,10 @@ static int sata_rcar_resume(struct device *dev) int ret; ret = pm_runtime_get_sync(dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(dev); return ret; + } if (priv->type == RCAR_GEN3_SATA) { sata_rcar_init_module(priv); @@ -1020,8 +1021,10 @@ static int sata_rcar_restore(struct device *dev) int ret; ret = pm_runtime_get_sync(dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(dev); return ret; + } sata_rcar_setup_port(host); -- cgit v1.2.3 From 11e6b688936b43ca602d94fd2c395a47682e40ed Mon Sep 17 00:00:00 2001 From: Ye Bin Date: Fri, 5 Jun 2020 09:41:49 +0800 Subject: ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function [ Upstream commit f650ef61e040bcb175dd8762164b00a5d627f20e ] BUG: KASAN: use-after-free in ata_scsi_mode_select_xlat+0x10bd/0x10f0 drivers/ata/libata-scsi.c:4045 Read of size 1 at addr ffff88803b8cd003 by task syz-executor.6/12621 CPU: 1 PID: 12621 Comm: syz-executor.6 Not tainted 4.19.95 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xac/0xee lib/dump_stack.c:118 print_address_description+0x60/0x223 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report mm/kasan/report.c:409 [inline] kasan_report.cold+0xae/0x2d8 mm/kasan/report.c:393 ata_scsi_mode_select_xlat+0x10bd/0x10f0 drivers/ata/libata-scsi.c:4045 ata_scsi_translate+0x2da/0x680 drivers/ata/libata-scsi.c:2035 __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4360 [inline] ata_scsi_queuecmd+0x2e4/0x790 drivers/ata/libata-scsi.c:4409 scsi_dispatch_cmd+0x2ee/0x6c0 drivers/scsi/scsi_lib.c:1867 scsi_queue_rq+0xfd7/0x1990 drivers/scsi/scsi_lib.c:2170 blk_mq_dispatch_rq_list+0x1e1/0x19a0 block/blk-mq.c:1186 blk_mq_do_dispatch_sched+0x147/0x3d0 block/blk-mq-sched.c:108 blk_mq_sched_dispatch_requests+0x427/0x680 block/blk-mq-sched.c:204 __blk_mq_run_hw_queue+0xbc/0x200 block/blk-mq.c:1308 __blk_mq_delay_run_hw_queue+0x3c0/0x460 block/blk-mq.c:1376 blk_mq_run_hw_queue+0x152/0x310 block/blk-mq.c:1413 blk_mq_sched_insert_request+0x337/0x6c0 block/blk-mq-sched.c:397 blk_execute_rq_nowait+0x124/0x320 block/blk-exec.c:64 blk_execute_rq+0xc5/0x112 block/blk-exec.c:101 sg_scsi_ioctl+0x3b0/0x6a0 block/scsi_ioctl.c:507 sg_ioctl+0xd37/0x23f0 drivers/scsi/sg.c:1106 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:501 [inline] do_vfs_ioctl+0xae6/0x1030 fs/ioctl.c:688 ksys_ioctl+0x76/0xa0 fs/ioctl.c:705 __do_sys_ioctl fs/ioctl.c:712 [inline] __se_sys_ioctl fs/ioctl.c:710 [inline] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:710 do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c479 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb0e9602c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fb0e96036d4 RCX: 000000000045c479 RDX: 0000000020000040 RSI: 0000000000000001 RDI: 0000000000000003 RBP: 000000000076bfc0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000046d R14: 00000000004c6e1a R15: 000000000076bfcc Allocated by task 12577: set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc mm/kasan/kasan.c:553 [inline] kasan_kmalloc+0xbf/0xe0 mm/kasan/kasan.c:531 __kmalloc+0xf3/0x1e0 mm/slub.c:3749 kmalloc include/linux/slab.h:520 [inline] load_elf_phdrs+0x118/0x1b0 fs/binfmt_elf.c:441 load_elf_binary+0x2de/0x4610 fs/binfmt_elf.c:737 search_binary_handler fs/exec.c:1654 [inline] search_binary_handler+0x15c/0x4e0 fs/exec.c:1632 exec_binprm fs/exec.c:1696 [inline] __do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8a/0xb0 fs/exec.c:1959 do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 12577: set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x129/0x170 mm/kasan/kasan.c:521 slab_free_hook mm/slub.c:1370 [inline] slab_free_freelist_hook mm/slub.c:1397 [inline] slab_free mm/slub.c:2952 [inline] kfree+0x8b/0x1a0 mm/slub.c:3904 load_elf_binary+0x1be7/0x4610 fs/binfmt_elf.c:1118 search_binary_handler fs/exec.c:1654 [inline] search_binary_handler+0x15c/0x4e0 fs/exec.c:1632 exec_binprm fs/exec.c:1696 [inline] __do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8a/0xb0 fs/exec.c:1959 do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88803b8ccf00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 259 bytes inside of 512-byte region [ffff88803b8ccf00, ffff88803b8cd100) The buggy address belongs to the page: page:ffffea0000ee3300 count:1 mapcount:0 mapping:ffff88806cc03080 index:0xffff88803b8cc780 compound_mapcount: 0 flags: 0x100000000008100(slab|head) raw: 0100000000008100 ffffea0001104080 0000000200000002 ffff88806cc03080 raw: ffff88803b8cc780 00000000800c000b 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88803b8ccf00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88803b8ccf80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88803b8cd000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88803b8cd080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88803b8cd100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc You can refer to "https://www.lkml.org/lkml/2019/1/17/474" reproduce this error. The exception code is "bd_len = p[3];", "p" value is ffff88803b8cd000 which belongs to the cache kmalloc-512 of size 512. The "page_address(sg_page(scsi_sglist(scmd)))" maybe from sg_scsi_ioctl function "buffer" which allocated by kzalloc, so "buffer" may not page aligned. This also looks completely buggy on highmem systems and really needs to use a kmap_atomic. --Christoph Hellwig To address above bugs, Paolo Bonzini advise to simpler to just make a char array of size CACHE_MPAGE_LEN+8+8+4-2(or just 64 to make it easy), use sg_copy_to_buffer to copy from the sglist into the buffer, and workthere. Signed-off-by: Ye Bin Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin --- drivers/ata/libata-scsi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 0c1572a1cc5e..6c2c2b07f029 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3995,12 +3995,13 @@ static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; const u8 *cdb = scmd->cmnd; - const u8 *p; u8 pg, spg; unsigned six_byte, pg_len, hdr_len, bd_len; int len; u16 fp = (u16)-1; u8 bp = 0xff; + u8 buffer[64]; + const u8 *p = buffer; VPRINTK("ENTER\n"); @@ -4034,12 +4035,14 @@ static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc) if (!scsi_sg_count(scmd) || scsi_sglist(scmd)->length < len) goto invalid_param_len; - p = page_address(sg_page(scsi_sglist(scmd))); - /* Move past header and block descriptors. */ if (len < hdr_len) goto invalid_param_len; + if (!sg_copy_to_buffer(scsi_sglist(scmd), scsi_sg_count(scmd), + buffer, sizeof(buffer))) + goto invalid_param_len; + if (six_byte) bd_len = p[3]; else -- cgit v1.2.3 From 0a39db51119aba468f3f2605edc289aa03a272b0 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Fri, 5 Jun 2020 20:37:44 +0300 Subject: drm/amd/display: Use kfree() to free rgb_user in calculate_user_regamma_ramp() [ Upstream commit 43a562774fceba867e8eebba977d7d42f8a2eac7 ] Use kfree() instead of kvfree() to free rgb_user in calculate_user_regamma_ramp() because the memory is allocated with kcalloc(). Signed-off-by: Denis Efremov Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/display/modules/color/color_gamma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c index 962900932bee..11ea1a0e629b 100644 --- a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c +++ b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c @@ -1561,7 +1561,7 @@ bool calculate_user_regamma_ramp(struct dc_transfer_func *output_tf, kfree(rgb_regamma); rgb_regamma_alloc_fail: - kvfree(rgb_user); + kfree(rgb_user); rgb_user_alloc_fail: return ret; } -- cgit v1.2.3 From a24f9d6cf9bd65c1305344134e0182ed7bef76c8 Mon Sep 17 00:00:00 2001 From: Nathan Huckleberry Date: Thu, 11 Jun 2020 18:32:35 +0000 Subject: riscv/atomic: Fix sign extension for RV64I [ Upstream commit 6c58f25e6938c073198af8b1e1832f83f8f0df33 ] The argument passed to cmpxchg is not guaranteed to be sign extended, but lr.w sign extends on RV64I. This makes cmpxchg fail on clang built kernels when __old is negative. To fix this, we just cast __old to long which sign extends on RV64I. With this fix, clang built RISC-V kernels now boot. Link: https://github.com/ClangBuiltLinux/linux/issues/867 Signed-off-by: Nathan Huckleberry Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin --- arch/riscv/include/asm/cmpxchg.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/riscv/include/asm/cmpxchg.h b/arch/riscv/include/asm/cmpxchg.h index c12833f7b6bd..42978aac99d5 100644 --- a/arch/riscv/include/asm/cmpxchg.h +++ b/arch/riscv/include/asm/cmpxchg.h @@ -187,7 +187,7 @@ " bnez %1, 0b\n" \ "1:\n" \ : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr) \ - : "rJ" (__old), "rJ" (__new) \ + : "rJ" ((long)__old), "rJ" (__new) \ : "memory"); \ break; \ case 8: \ @@ -232,7 +232,7 @@ RISCV_ACQUIRE_BARRIER \ "1:\n" \ : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr) \ - : "rJ" (__old), "rJ" (__new) \ + : "rJ" ((long)__old), "rJ" (__new) \ : "memory"); \ break; \ case 8: \ @@ -278,7 +278,7 @@ " bnez %1, 0b\n" \ "1:\n" \ : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr) \ - : "rJ" (__old), "rJ" (__new) \ + : "rJ" ((long)__old), "rJ" (__new) \ : "memory"); \ break; \ case 8: \ @@ -324,7 +324,7 @@ " fence rw, rw\n" \ "1:\n" \ : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr) \ - : "rJ" (__old), "rJ" (__new) \ + : "rJ" ((long)__old), "rJ" (__new) \ : "memory"); \ break; \ case 8: \ -- cgit v1.2.3 From 1f63c02277c76cc24d6acecdc3fb7b1575cbfbf7 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Thu, 28 May 2020 15:21:04 +0800 Subject: hwrng: ks-sa - Fix runtime PM imbalance on error [ Upstream commit 95459261c99f1621d90bc628c2a48e60b7cf9a88 ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu Reviewed-by: Alexander Sverdlin Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/char/hw_random/ks-sa-rng.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/char/hw_random/ks-sa-rng.c b/drivers/char/hw_random/ks-sa-rng.c index 62c6696c1dbd..b6d7db362b21 100644 --- a/drivers/char/hw_random/ks-sa-rng.c +++ b/drivers/char/hw_random/ks-sa-rng.c @@ -216,6 +216,7 @@ static int ks_sa_rng_probe(struct platform_device *pdev) ret = pm_runtime_get_sync(dev); if (ret < 0) { dev_err(dev, "Failed to enable SA power-domain\n"); + pm_runtime_put_noidle(dev); pm_runtime_disable(dev); return ret; } -- cgit v1.2.3 From ed1e2fcb187620947de899948439907f0df67faf Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Mon, 15 Jun 2020 10:29:23 -0500 Subject: ibmvnic: Harden device login requests [ Upstream commit dff515a3e71dc8ab3b9dcc2e23a9b5fca88b3c18 ] The VNIC driver's "login" command sequence is the final step in the driver's initialization process with device firmware, confirming the available device queue resources to be utilized by the driver. Under high system load, firmware may not respond to the request in a timely manner or may abort the request. In such cases, the driver should reattempt the login command sequence. In case of a device error, the number of retries is bounded. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/ibm/ibmvnic.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 645298628b6f..5e9e45befc87 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -792,12 +792,13 @@ static int ibmvnic_login(struct net_device *netdev) struct ibmvnic_adapter *adapter = netdev_priv(netdev); unsigned long timeout = msecs_to_jiffies(30000); int retry_count = 0; + int retries = 10; bool retry; int rc; do { retry = false; - if (retry_count > IBMVNIC_MAX_QUEUES) { + if (retry_count > retries) { netdev_warn(netdev, "Login attempts exceeded\n"); return -1; } @@ -812,11 +813,23 @@ static int ibmvnic_login(struct net_device *netdev) if (!wait_for_completion_timeout(&adapter->init_done, timeout)) { - netdev_warn(netdev, "Login timed out\n"); - return -1; + netdev_warn(netdev, "Login timed out, retrying...\n"); + retry = true; + adapter->init_done_rc = 0; + retry_count++; + continue; } - if (adapter->init_done_rc == PARTIALSUCCESS) { + if (adapter->init_done_rc == ABORTED) { + netdev_warn(netdev, "Login aborted, retrying...\n"); + retry = true; + adapter->init_done_rc = 0; + retry_count++; + /* FW or device may be busy, so + * wait a bit before retrying login + */ + msleep(500); + } else if (adapter->init_done_rc == PARTIALSUCCESS) { retry_count++; release_sub_crqs(adapter, 1); -- cgit v1.2.3 From 8114ae273a366652eaf42eff4716e4f5a18c7988 Mon Sep 17 00:00:00 2001 From: Zekun Shen Date: Mon, 15 Jun 2020 11:50:29 -0400 Subject: net: alx: fix race condition in alx_remove [ Upstream commit e89df5c4322c1bf495f62d74745895b5fd2a4393 ] There is a race condition exist during termination. The path is alx_stop and then alx_remove. An alx_schedule_link_check could be called before alx_stop by interrupt handler and invoke alx_link_check later. Alx_stop frees the napis, and alx_remove cancels any pending works. If any of the work is scheduled before termination and invoked before alx_remove, a null-ptr-deref occurs because both expect alx->napis[i]. This patch fix the race condition by moving cancel_work_sync functions before alx_free_napis inside alx_stop. Because interrupt handler can call alx_schedule_link_check again, alx_free_irq is moved before cancel_work_sync calls too. Signed-off-by: Zekun Shen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/atheros/alx/main.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index 6d3221134927..dd63b993ce7b 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -1250,8 +1250,12 @@ out_disable_adv_intr: static void __alx_stop(struct alx_priv *alx) { - alx_halt(alx); alx_free_irq(alx); + + cancel_work_sync(&alx->link_check_wk); + cancel_work_sync(&alx->reset_wk); + + alx_halt(alx); alx_free_rings(alx); alx_free_napis(alx); } @@ -1861,9 +1865,6 @@ static void alx_remove(struct pci_dev *pdev) struct alx_priv *alx = pci_get_drvdata(pdev); struct alx_hw *hw = &alx->hw; - cancel_work_sync(&alx->link_check_wk); - cancel_work_sync(&alx->reset_wk); - /* restore permanent mac address */ alx_set_macaddr(hw, hw->perm_addr); -- cgit v1.2.3 From 42cd50aaa169dc0ac407db1c7b3bc8a9a1404299 Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Mon, 9 Mar 2020 16:44:50 +0100 Subject: s390/ptrace: fix setting syscall number [ Upstream commit 873e5a763d604c32988c4a78913a8dab3862d2f9 ] When strace wants to update the syscall number, it sets GPR2 to the desired number and updates the GPR via PTRACE_SETREGSET. It doesn't update regs->int_code which would cause the old syscall executed on syscall restart. As we cannot change the ptrace ABI and don't have a field for the interruption code, check whether the tracee is in a syscall and the last instruction was svc. In that case assume that the tracer wants to update the syscall number and copy the GPR2 value to regs->int_code. Signed-off-by: Sven Schnelle Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin --- arch/s390/kernel/ptrace.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index cd3df5514552..65fefbf61e1c 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -325,6 +325,25 @@ static inline void __poke_user_per(struct task_struct *child, child->thread.per_user.end = data; } +static void fixup_int_code(struct task_struct *child, addr_t data) +{ + struct pt_regs *regs = task_pt_regs(child); + int ilc = regs->int_code >> 16; + u16 insn; + + if (ilc > 6) + return; + + if (ptrace_access_vm(child, regs->psw.addr - (regs->int_code >> 16), + &insn, sizeof(insn), FOLL_FORCE) != sizeof(insn)) + return; + + /* double check that tracee stopped on svc instruction */ + if ((insn >> 8) != 0xa) + return; + + regs->int_code = 0x20000 | (data & 0xffff); +} /* * Write a word to the user area of a process at location addr. This * operation does have an additional problem compared to peek_user. @@ -336,7 +355,9 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) struct user *dummy = NULL; addr_t offset; + if (addr < (addr_t) &dummy->regs.acrs) { + struct pt_regs *regs = task_pt_regs(child); /* * psw and gprs are stored on the stack */ @@ -354,7 +375,11 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) /* Invalid addressing mode bits */ return -EINVAL; } - *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data; + + if (test_pt_regs_flag(regs, PIF_SYSCALL) && + addr == offsetof(struct user, regs.gprs[2])) + fixup_int_code(child, data); + *(addr_t *)((addr_t) ®s->psw + addr) = data; } else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) { /* @@ -720,6 +745,10 @@ static int __poke_user_compat(struct task_struct *child, regs->psw.mask = (regs->psw.mask & ~PSW_MASK_BA) | (__u64)(tmp & PSW32_ADDR_AMODE); } else { + + if (test_pt_regs_flag(regs, PIF_SYSCALL) && + addr == offsetof(struct compat_user, regs.gprs[2])) + fixup_int_code(child, data); /* gpr 0-15 */ *(__u32*)((addr_t) ®s->psw + addr*2 + 4) = tmp; } -- cgit v1.2.3 From f9e97d64c351b778f8b41f2f1b54ac5524936f6b Mon Sep 17 00:00:00 2001 From: Vincenzo Frascino Date: Tue, 24 Mar 2020 12:10:27 +0000 Subject: s390/vdso: fix vDSO clock_getres() [ Upstream commit 478237a595120a18e9b52fd2c57a6e8b7a01e411 ] clock_getres in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; and hrtimer_resolution depends on the enablement of the high resolution timers that can happen either at compile or at run time. Fix the s390 vdso implementation of clock_getres keeping a copy of hrtimer_resolution in vdso data and using that directly. Link: https://lkml.kernel.org/r/20200324121027.21665-1-vincenzo.frascino@arm.com Signed-off-by: Vincenzo Frascino Acked-by: Martin Schwidefsky [heiko.carstens@de.ibm.com: use llgf for proper zero extension] Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin --- arch/s390/include/asm/vdso.h | 1 + arch/s390/kernel/asm-offsets.c | 2 +- arch/s390/kernel/time.c | 1 + arch/s390/kernel/vdso64/clock_getres.S | 10 +++++----- 4 files changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h index 169d7604eb80..f3ba84fa9bd1 100644 --- a/arch/s390/include/asm/vdso.h +++ b/arch/s390/include/asm/vdso.h @@ -36,6 +36,7 @@ struct vdso_data { __u32 tk_shift; /* Shift used for xtime_nsec 0x60 */ __u32 ts_dir; /* TOD steering direction 0x64 */ __u64 ts_end; /* TOD steering end 0x68 */ + __u32 hrtimer_res; /* hrtimer resolution 0x70 */ }; struct vdso_per_cpu_data { diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 66e830f1c7bf..e9d09f6e81d2 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -75,6 +75,7 @@ int main(void) OFFSET(__VDSO_TK_SHIFT, vdso_data, tk_shift); OFFSET(__VDSO_TS_DIR, vdso_data, ts_dir); OFFSET(__VDSO_TS_END, vdso_data, ts_end); + OFFSET(__VDSO_CLOCK_REALTIME_RES, vdso_data, hrtimer_res); OFFSET(__VDSO_ECTG_BASE, vdso_per_cpu_data, ectg_timer_base); OFFSET(__VDSO_ECTG_USER, vdso_per_cpu_data, ectg_user_time); OFFSET(__VDSO_CPU_NR, vdso_per_cpu_data, cpu_nr); @@ -86,7 +87,6 @@ int main(void) DEFINE(__CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE); DEFINE(__CLOCK_MONOTONIC_COARSE, CLOCK_MONOTONIC_COARSE); DEFINE(__CLOCK_THREAD_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID); - DEFINE(__CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC); DEFINE(__CLOCK_COARSE_RES, LOW_RES_NSEC); BLANK(); /* idle data offsets */ diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index e8766beee5ad..8ea9db599d38 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -310,6 +310,7 @@ void update_vsyscall(struct timekeeper *tk) vdso_data->tk_mult = tk->tkr_mono.mult; vdso_data->tk_shift = tk->tkr_mono.shift; + vdso_data->hrtimer_res = hrtimer_resolution; smp_wmb(); ++vdso_data->tb_update_count; } diff --git a/arch/s390/kernel/vdso64/clock_getres.S b/arch/s390/kernel/vdso64/clock_getres.S index 081435398e0a..0c79caa32b59 100644 --- a/arch/s390/kernel/vdso64/clock_getres.S +++ b/arch/s390/kernel/vdso64/clock_getres.S @@ -17,12 +17,14 @@ .type __kernel_clock_getres,@function __kernel_clock_getres: CFI_STARTPROC - larl %r1,4f + larl %r1,3f + lg %r0,0(%r1) cghi %r2,__CLOCK_REALTIME_COARSE je 0f cghi %r2,__CLOCK_MONOTONIC_COARSE je 0f - larl %r1,3f + larl %r1,_vdso_data + llgf %r0,__VDSO_CLOCK_REALTIME_RES(%r1) cghi %r2,__CLOCK_REALTIME je 0f cghi %r2,__CLOCK_MONOTONIC @@ -36,7 +38,6 @@ __kernel_clock_getres: jz 2f 0: ltgr %r3,%r3 jz 1f /* res == NULL */ - lg %r0,0(%r1) xc 0(8,%r3),0(%r3) /* set tp->tv_sec to zero */ stg %r0,8(%r3) /* store tp->tv_usec */ 1: lghi %r2,0 @@ -45,6 +46,5 @@ __kernel_clock_getres: svc 0 br %r14 CFI_ENDPROC -3: .quad __CLOCK_REALTIME_RES -4: .quad __CLOCK_COARSE_RES +3: .quad __CLOCK_COARSE_RES .size __kernel_clock_getres,.-__kernel_clock_getres -- cgit v1.2.3 From 2c0053203879bd4ebb4c9935977558cf70536d63 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 16 Jun 2020 18:29:11 +0100 Subject: arm64: sve: Fix build failure when ARM64_SVE=y and SYSCTL=n [ Upstream commit e575fb9e76c8e33440fb859572a8b7d430f053d6 ] When I squashed the 'allnoconfig' compiler warning about the set_sve_default_vl() function being defined but not used in commit 1e570f512cbd ("arm64/sve: Eliminate data races on sve_default_vl"), I accidentally broke the build for configs where ARM64_SVE is enabled, but SYSCTL is not. Fix this by only compiling the SVE sysctl support if both CONFIG_SVE=y and CONFIG_SYSCTL=y. Cc: Dave Martin Reported-by: Qian Cai Link: https://lore.kernel.org/r/20200616131808.GA1040@lca.pw Signed-off-by: Will Deacon Signed-off-by: Sasha Levin --- arch/arm64/kernel/fpsimd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 14fdbaa6ee3a..19c87b52c001 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -304,7 +304,7 @@ static unsigned int find_supported_vector_length(unsigned int vl) return sve_vl_from_vq(bit_to_vq(bit)); } -#ifdef CONFIG_SYSCTL +#if defined(CONFIG_ARM64_SVE) && defined(CONFIG_SYSCTL) static int sve_proc_do_default_vl(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, @@ -350,9 +350,9 @@ static int __init sve_sysctl_init(void) return 0; } -#else /* ! CONFIG_SYSCTL */ +#else /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */ static int __init sve_sysctl_init(void) { return 0; } -#endif /* ! CONFIG_SYSCTL */ +#endif /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */ #define ZREG(sve_state, vq, n) ((char *)(sve_state) + \ (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET)) -- cgit v1.2.3 From 27e3fa7e9ccf31c4a21a257034cfa560cd189449 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 14 Jun 2020 23:43:40 +0900 Subject: kbuild: improve cc-option to clean up all temporary files [ Upstream commit f2f02ebd8f3833626642688b2d2c6a7b3c141fa9 ] When cc-option and friends evaluate compiler flags, the temporary file $$TMP is created as an output object, and automatically cleaned up. The actual file path of $$TMP is ..tmp, here is the process ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the escape sequence of $$). Such garbage files are cleaned up in most cases, but some compiler flags create additional output files. For example, -gsplit-dwarf creates a .dwo file. When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of ..dwo files left in the top of build directories. You may not notice them unless you do 'ls -a', but the garbage files will increase every time you run 'make'. This commit changes the temporary object path to .tmp_/tmp, and removes .tmp_ directory when exiting. Separate build artifacts such as *.dwo will be cleaned up all together because their file paths are usually determined based on the base name of the object. Another example is -ftest-coverage, which outputs the coverage data into .gcno Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin --- scripts/Kbuild.include | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index ce53639a864a..c830750d725b 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -81,20 +81,21 @@ cc-cross-prefix = \ fi))) # output directory for tests below -TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/) +TMPOUT = $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_$$$$ # try-run # Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise) # Exit code chooses option. "$$TMP" serves as a temporary file and is # automatically cleaned up. try-run = $(shell set -e; \ - TMP="$(TMPOUT).$$$$.tmp"; \ - TMPO="$(TMPOUT).$$$$.o"; \ + TMP=$(TMPOUT)/tmp; \ + TMPO=$(TMPOUT)/tmp.o; \ + mkdir -p $(TMPOUT); \ + trap "rm -rf $(TMPOUT)" EXIT; \ if ($(1)) >/dev/null 2>&1; \ then echo "$(2)"; \ else echo "$(3)"; \ - fi; \ - rm -f "$$TMP" "$$TMPO") + fi) # as-option # Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,) -- cgit v1.2.3 From c7b333600aac096d700b857eebed8269f08a1b4b Mon Sep 17 00:00:00 2001 From: Luis Chamberlain Date: Fri, 5 Jun 2020 16:58:36 +0200 Subject: blktrace: break out of blktrace setup on concurrent calls [ Upstream commit 1b0b283648163dae2a214ca28ed5a99f62a77319 ] We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktrace Signed-off-by: Luis Chamberlain Signed-off-by: Jan Kara Reviewed-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin --- kernel/trace/blktrace.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index b7e1e09a0bef..7a4ca2deb39b 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -3,6 +3,9 @@ * Copyright (C) 2006 Jens Axboe * */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -495,6 +498,16 @@ static int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev, */ strreplace(buts->name, '/', '_'); + /* + * bdev can be NULL, as with scsi-generic, this is a helpful as + * we can be. + */ + if (q->blk_trace) { + pr_warn("Concurrent blktraces are not allowed on %s\n", + buts->name); + return -EBUSY; + } + bt = kzalloc(sizeof(*bt), GFP_KERNEL); if (!bt) return -ENOMEM; -- cgit v1.2.3 From db9138d06e441f8da6cd4ce684ebda7b5f03011b Mon Sep 17 00:00:00 2001 From: Yash Shah Date: Tue, 16 Jun 2020 19:33:06 +0530 Subject: RISC-V: Don't allow write+exec only page mapping request in mmap [ Upstream commit e0d17c842c0f824fd4df9f4688709fc6907201e1 ] As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the RISC-V instruction set manual[0], the PTE permission bit combination of "write+exec only" is reserved for future use. Hence, don't allow such mapping request in mmap call. An issue is been reported by David Abdurachmanov, that while running stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V specific kernel. This issue arises when the stress-sysbadaddr request for pages with "write+exec only" permission bits and then passes the address obtain from this mmap call to various system call. For the riscv kernel, the mmap call should fail for this particular combination of permission bits since it's not valid. [0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdf Signed-off-by: Yash Shah Reported-by: David Abdurachmanov [Palmer: Refer to the latest ISA specification at the only link I could find, and update the terminology.] Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin --- arch/riscv/kernel/sys_riscv.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c index fb03a4482ad6..db44da32701f 100644 --- a/arch/riscv/kernel/sys_riscv.c +++ b/arch/riscv/kernel/sys_riscv.c @@ -16,6 +16,7 @@ #include #include #include +#include static long riscv_sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, @@ -24,6 +25,11 @@ static long riscv_sys_mmap(unsigned long addr, unsigned long len, { if (unlikely(offset & (~PAGE_MASK >> page_shift_offset))) return -EINVAL; + + if ((prot & PROT_WRITE) && (prot & PROT_EXEC)) + if (unlikely(!(prot & PROT_READ))) + return -EINVAL; + return ksys_mmap_pgoff(addr, len, prot, flags, fd, offset >> (PAGE_SHIFT - page_shift_offset)); } -- cgit v1.2.3 From 94d5b41ac1031853ddc833926a52ff71ffea28de Mon Sep 17 00:00:00 2001 From: Aaron Plattner Date: Thu, 11 Jun 2020 11:08:45 -0700 Subject: ALSA: hda: Add NVIDIA codec IDs 9a & 9d through a0 to patch table commit adb36a8203831e40494a92095dacd566b2ad4a69 upstream. These IDs are for upcoming NVIDIA chips with audio functions that are largely similar to the existing ones. Signed-off-by: Aaron Plattner Cc: Link: https://lore.kernel.org/r/20200611180845.39942-1-aplattner@nvidia.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_hdmi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 1d83c3c59e1a..419d099b5582 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3898,6 +3898,11 @@ HDA_CODEC_ENTRY(0x10de0095, "GPU 95 HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de0097, "GPU 97 HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de0098, "GPU 98 HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de0099, "GPU 99 HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de009a, "GPU 9a HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de009d, "GPU 9d HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de009e, "GPU 9e HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de009f, "GPU 9f HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de00a0, "GPU a0 HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de8001, "MCP73 HDMI", patch_nvhdmi_2ch), HDA_CODEC_ENTRY(0x10de8067, "MCP67/68 HDMI", patch_nvhdmi_2ch), HDA_CODEC_ENTRY(0x11069f80, "VX900 HDMI/DP", patch_via_hdmi), -- cgit v1.2.3 From 1c5cb980b026782fc1672ba4d47c9709d77a4a62 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Jun 2020 15:21:50 +0200 Subject: ALSA: hda/realtek - Add quirk for MSI GE63 laptop commit a0b03952a797591d4b6d6fa7b9b7872e27783729 upstream. MSI GE63 laptop with ALC1220 codec requires the very same quirk (ALC1220_FIXUP_CLEVO_P950) as other MSI devices for the proper sound output. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208057 Cc: Link: https://lore.kernel.org/r/20200616132150.8778-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 54887a87bddb..beec9e3b6205 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2446,6 +2446,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS), SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950), + SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1275, "MSI-GL63", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950), -- cgit v1.2.3 From 5c566f718fc23f00f5a08a187c936409470b7d99 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Thu, 11 Jun 2020 21:51:50 -0700 Subject: ACPI: sysfs: Fix pm_profile_attr type commit e6d701dca9893990d999fd145e3e07223c002b06 upstream. When running a kernel with Clang's Control Flow Integrity implemented, there is a violation that happens when accessing /sys/firmware/acpi/pm_profile: $ cat /sys/firmware/acpi/pm_profile 0 $ dmesg ... [ 17.352564] ------------[ cut here ]------------ [ 17.352568] CFI failure (target: acpi_show_profile+0x0/0x8): [ 17.352572] WARNING: CPU: 3 PID: 497 at kernel/cfi.c:29 __cfi_check_fail+0x33/0x40 [ 17.352573] Modules linked in: [ 17.352575] CPU: 3 PID: 497 Comm: cat Tainted: G W 5.7.0-microsoft-standard+ #1 [ 17.352576] RIP: 0010:__cfi_check_fail+0x33/0x40 [ 17.352577] Code: 48 c7 c7 50 b3 85 84 48 c7 c6 50 0a 4e 84 e8 a4 d8 60 00 85 c0 75 02 5b c3 48 c7 c7 dc 5e 49 84 48 89 de 31 c0 e8 7d 06 eb ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 85 f6 74 25 41 b9 ea ff ff [ 17.352577] RSP: 0018:ffffaa6dc3c53d30 EFLAGS: 00010246 [ 17.352578] RAX: 331267e0c06cee00 RBX: ffffffff83d85890 RCX: ffffffff8483a6f8 [ 17.352579] RDX: ffff9cceabbb37c0 RSI: 0000000000000082 RDI: ffffffff84bb9e1c [ 17.352579] RBP: ffffffff845b2bc8 R08: 0000000000000001 R09: ffff9cceabbba200 [ 17.352579] R10: 000000000000019d R11: 0000000000000000 R12: ffff9cc947766f00 [ 17.352580] R13: ffffffff83d6bd50 R14: ffff9ccc6fa80000 R15: ffffffff845bd328 [ 17.352582] FS: 00007fdbc8d13580(0000) GS:ffff9cce91ac0000(0000) knlGS:0000000000000000 [ 17.352582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.352583] CR2: 00007fdbc858e000 CR3: 00000005174d0000 CR4: 0000000000340ea0 [ 17.352584] Call Trace: [ 17.352586] ? rev_id_show+0x8/0x8 [ 17.352587] ? __cfi_check+0x45bac/0x4b640 [ 17.352589] ? kobj_attr_show+0x73/0x80 [ 17.352590] ? sysfs_kf_seq_show+0xc1/0x140 [ 17.352592] ? ext4_seq_options_show.cfi_jt+0x8/0x8 [ 17.352593] ? seq_read+0x180/0x600 [ 17.352595] ? sysfs_create_file_ns.cfi_jt+0x10/0x10 [ 17.352596] ? tlbflush_read_file+0x8/0x8 [ 17.352597] ? __vfs_read+0x6b/0x220 [ 17.352598] ? handle_mm_fault+0xa23/0x11b0 [ 17.352599] ? vfs_read+0xa2/0x130 [ 17.352599] ? ksys_read+0x6a/0xd0 [ 17.352601] ? __do_sys_getpgrp+0x8/0x8 [ 17.352602] ? do_syscall_64+0x72/0x120 [ 17.352603] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 17.352604] ---[ end trace 7b1fa81dc897e419 ]--- When /sys/firmware/acpi/pm_profile is read, sysfs_kf_seq_show is called, which in turn calls kobj_attr_show, which gets the ->show callback member by calling container_of on attr (casting it to struct kobj_attribute) then calls it. There is a CFI violation because pm_profile_attr is of type struct device_attribute but kobj_attr_show calls ->show expecting it to be from struct kobj_attribute. CFI checking ensures that function pointer types match when doing indirect calls. Fix pm_profile_attr to be defined in terms of kobj_attribute so there is no violation or mismatch. Fixes: 362b646062b2 ("ACPI: Export FADT pm_profile integer value to userspace") Link: https://github.com/ClangBuiltLinux/linux/issues/1051 Reported-by: yuu ichii Signed-off-by: Nathan Chancellor Cc: 3.10+ # 3.10+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 0a8eb8961770..39ee0ca636aa 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -935,13 +935,13 @@ static void __exit interrupt_stats_exit(void) } static ssize_t -acpi_show_profile(struct device *dev, struct device_attribute *attr, +acpi_show_profile(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { return sprintf(buf, "%d\n", acpi_gbl_FADT.preferred_profile); } -static const struct device_attribute pm_profile_attr = +static const struct kobj_attribute pm_profile_attr = __ATTR(pm_profile, S_IRUGO, acpi_show_profile, NULL); static ssize_t hotplug_enabled_show(struct kobject *kobj, -- cgit v1.2.3 From aaedcd7df6b14c7d5b9875fe4390e1841520fe51 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Fri, 19 Jun 2020 07:43:49 +0800 Subject: erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup commit 3c597282887fd55181578996dca52ce697d985a5 upstream. Hongyu reported "id != index" in z_erofs_onlinepage_fixup() with specific aarch64 environment easily, which wasn't shown before. After digging into that, I found that high 32 bits of page->private was set to 0xaaaaaaaa rather than 0 (due to z_erofs_onlinepage_init behavior with specific compiler options). Actually we only use low 32 bits to keep the page information since page->private is only 4 bytes on most 32-bit platforms. However z_erofs_onlinepage_fixup() uses the upper 32 bits by mistake. Let's fix it now. Reported-and-tested-by: Hongyu Jin Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support") Cc: # 4.19+ Reviewed-by: Chao Yu Link: https://lore.kernel.org/r/20200618234349.22553-1-hsiangkao@aol.com Signed-off-by: Gao Xiang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/erofs/unzip_vle.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/staging/erofs/unzip_vle.h b/drivers/staging/erofs/unzip_vle.h index 684ff06fc7bf..630fd1f4f123 100644 --- a/drivers/staging/erofs/unzip_vle.h +++ b/drivers/staging/erofs/unzip_vle.h @@ -169,22 +169,22 @@ static inline void z_erofs_onlinepage_init(struct page *page) static inline void z_erofs_onlinepage_fixup(struct page *page, uintptr_t index, bool down) { - unsigned long *p, o, v, id; -repeat: - p = &page_private(page); - o = READ_ONCE(*p); + union z_erofs_onlinepage_converter u = { .v = &page_private(page) }; + int orig, orig_index, val; - id = o >> Z_EROFS_ONLINEPAGE_INDEX_SHIFT; - if (id) { +repeat: + orig = atomic_read(u.o); + orig_index = orig >> Z_EROFS_ONLINEPAGE_INDEX_SHIFT; + if (orig_index) { if (!index) return; - BUG_ON(id != index); + DBG_BUGON(orig_index != index); } - v = (index << Z_EROFS_ONLINEPAGE_INDEX_SHIFT) | - ((o & Z_EROFS_ONLINEPAGE_COUNT_MASK) + (unsigned)down); - if (cmpxchg(p, o, v) != o) + val = (index << Z_EROFS_ONLINEPAGE_INDEX_SHIFT) | + ((orig & Z_EROFS_ONLINEPAGE_COUNT_MASK) + (unsigned int)down); + if (atomic_cmpxchg(u.o, orig, val) != orig) goto repeat; } -- cgit v1.2.3 From 2e7412293c4fd37048dfcd5c3356a3710d0b5e46 Mon Sep 17 00:00:00 2001 From: Xiaoyao Li Date: Tue, 16 Jun 2020 15:33:07 +0800 Subject: KVM: X86: Fix MSR range of APIC registers in X2APIC mode commit bf10bd0be53282183f374af23577b18b5fbf7801 upstream. Only MSR address range 0x800 through 0x8ff is architecturally reserved and dedicated for accessing APIC registers in x2APIC mode. Fixes: 0105d1a52640 ("KVM: x2apic interface to lapic") Signed-off-by: Xiaoyao Li Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson Reviewed-by: Jim Mattson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman --- arch/x86/kvm/x86.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 50d59ad34619..0aa5c4134b90 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2499,7 +2499,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) return kvm_mtrr_set_msr(vcpu, msr, data); case MSR_IA32_APICBASE: return kvm_set_apic_base(vcpu, msr_info); - case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff: + case APIC_BASE_MSR ... APIC_BASE_MSR + 0xff: return kvm_x2apic_msr_write(vcpu, msr, data); case MSR_IA32_TSCDEADLINE: kvm_set_lapic_tscdeadline_msr(vcpu, data); @@ -2797,7 +2797,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) case MSR_IA32_APICBASE: msr_info->data = kvm_get_apic_base(vcpu); break; - case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff: + case APIC_BASE_MSR ... APIC_BASE_MSR + 0xff: return kvm_x2apic_msr_read(vcpu, msr_info->index, &msr_info->data); break; case MSR_IA32_TSCDEADLINE: -- cgit v1.2.3 From cf6a8b2071802ad8786598667fcc650e6f46ade1 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 22 Jun 2020 14:58:29 -0700 Subject: KVM: nVMX: Plumb L2 GPA through to PML emulation commit 2dbebf7ae1ed9a420d954305e2c9d5ed39ec57c3 upstream. Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all intents and purposes is vmx_write_pml_buffer(), instead of having the latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit update is the result of KVM emulation (rare for L2), then the GPA in the VMCS may be stale and/or hold a completely unrelated GPA. Fixes: c5f983f6e8455 ("nVMX: Implement emulated Page Modification Logging") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/kvm/mmu.c | 4 ++-- arch/x86/kvm/mmu.h | 2 +- arch/x86/kvm/paging_tmpl.h | 7 ++++--- arch/x86/kvm/vmx.c | 5 ++--- 5 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 33136395db8f..ce7b3b22ae86 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1099,7 +1099,7 @@ struct kvm_x86_ops { void (*enable_log_dirty_pt_masked)(struct kvm *kvm, struct kvm_memory_slot *slot, gfn_t offset, unsigned long mask); - int (*write_log_dirty)(struct kvm_vcpu *vcpu); + int (*write_log_dirty)(struct kvm_vcpu *vcpu, gpa_t l2_gpa); /* pmu operations of sub-arch */ const struct kvm_pmu_ops *pmu_ops; diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 0679303e5f3d..712bc103ef3a 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1732,10 +1732,10 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm, * Emulate arch specific page modification logging for the * nested hypervisor */ -int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu) +int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu, gpa_t l2_gpa) { if (kvm_x86_ops->write_log_dirty) - return kvm_x86_ops->write_log_dirty(vcpu); + return kvm_x86_ops->write_log_dirty(vcpu, l2_gpa); return 0; } diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index f7b2de7b6382..0b62c817f63f 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -215,7 +215,7 @@ void kvm_mmu_gfn_disallow_lpage(struct kvm_memory_slot *slot, gfn_t gfn); void kvm_mmu_gfn_allow_lpage(struct kvm_memory_slot *slot, gfn_t gfn); bool kvm_mmu_slot_gfn_write_protect(struct kvm *kvm, struct kvm_memory_slot *slot, u64 gfn); -int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu); +int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu, gpa_t l2_gpa); int kvm_mmu_post_init_vm(struct kvm *kvm); void kvm_mmu_pre_destroy_vm(struct kvm *kvm); diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 61f10a4fd807..8220190b0605 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -202,7 +202,7 @@ static inline unsigned FNAME(gpte_access)(u64 gpte) static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, struct guest_walker *walker, - int write_fault) + gpa_t addr, int write_fault) { unsigned level, index; pt_element_t pte, orig_pte; @@ -227,7 +227,7 @@ static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu, !(pte & PT_GUEST_DIRTY_MASK)) { trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte)); #if PTTYPE == PTTYPE_EPT - if (kvm_arch_write_log_dirty(vcpu)) + if (kvm_arch_write_log_dirty(vcpu, addr)) return -EINVAL; #endif pte |= PT_GUEST_DIRTY_MASK; @@ -424,7 +424,8 @@ retry_walk: (PT_GUEST_DIRTY_SHIFT - PT_GUEST_ACCESSED_SHIFT); if (unlikely(!accessed_dirty)) { - ret = FNAME(update_accessed_dirty_bits)(vcpu, mmu, walker, write_fault); + ret = FNAME(update_accessed_dirty_bits)(vcpu, mmu, walker, + addr, write_fault); if (unlikely(ret < 0)) goto error; else if (ret) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 2c4baff7553b..f90a9d4d1641 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -13845,11 +13845,10 @@ static void vmx_flush_log_dirty(struct kvm *kvm) kvm_flush_pml_buffers(kvm); } -static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu) +static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu, gpa_t gpa) { struct vmcs12 *vmcs12; struct vcpu_vmx *vmx = to_vmx(vcpu); - gpa_t gpa; struct page *page = NULL; u64 *pml_address; @@ -13870,7 +13869,7 @@ static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu) return 1; } - gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS) & ~0xFFFull; + gpa &= ~0xFFFull; page = kvm_vcpu_gpa_to_page(vcpu, vmcs12->pml_address); if (is_error_page(page)) -- cgit v1.2.3 From 50db905f00f07b21237360881980ee142eee8e56 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 18 Jun 2020 11:20:02 +0100 Subject: x86/asm/64: Align start of __clear_user() loop to 16-bytes commit bb5570ad3b54e7930997aec76ab68256d5236d94 upstream. x86 CPUs can suffer severe performance drops if a tight loop, such as the ones in __clear_user(), straddles a 16-byte instruction fetch window, or worse, a 64-byte cacheline. This issues was discovered in the SUSE kernel with the following commit, 1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants") which increased the code object size from 10 bytes to 15 bytes and caused the 8-byte copy loop in __clear_user() to be split across a 64-byte cacheline. Aligning the start of the loop to 16-bytes makes this fit neatly inside a single instruction fetch window again and restores the performance of __clear_user() which is used heavily when reading from /dev/zero. Here are some numbers from running libmicro's read_z* and pread_z* microbenchmarks which read from /dev/zero: Zen 1 (Naples) libmicro-file 5.7.0-rc6 5.7.0-rc6 5.7.0-rc6 revert-1153933703d9+ align16+ Time mean95-pread_z100k 9.9195 ( 0.00%) 5.9856 ( 39.66%) 5.9938 ( 39.58%) Time mean95-pread_z10k 1.1378 ( 0.00%) 0.7450 ( 34.52%) 0.7467 ( 34.38%) Time mean95-pread_z1k 0.2623 ( 0.00%) 0.2251 ( 14.18%) 0.2252 ( 14.15%) Time mean95-pread_zw100k 9.9974 ( 0.00%) 6.0648 ( 39.34%) 6.0756 ( 39.23%) Time mean95-read_z100k 9.8940 ( 0.00%) 5.9885 ( 39.47%) 5.9994 ( 39.36%) Time mean95-read_z10k 1.1394 ( 0.00%) 0.7483 ( 34.33%) 0.7482 ( 34.33%) Note that this doesn't affect Haswell or Broadwell microarchitectures which seem to avoid the alignment issue by executing the loop straight out of the Loop Stream Detector (verified using perf events). Fixes: 1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants") Signed-off-by: Matt Fleming Signed-off-by: Borislav Petkov Cc: # v4.19+ Link: https://lkml.kernel.org/r/20200618102002.30034-1-matt@codeblueprint.co.uk Signed-off-by: Greg Kroah-Hartman --- arch/x86/lib/usercopy_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index 9c5606d88f61..7077b3e28241 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -23,6 +23,7 @@ unsigned long __clear_user(void __user *addr, unsigned long size) asm volatile( " testq %[size8],%[size8]\n" " jz 4f\n" + " .align 16\n" "0: movq $0,(%[dst])\n" " addq $8,%[dst]\n" " decl %%ecx ; jnz 0b\n" -- cgit v1.2.3 From a092d4548a29d69c265c052a22dfb1a58c5a5976 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 8 Jun 2020 13:32:55 +0100 Subject: btrfs: fix data block group relocation failure due to concurrent scrub commit 432cd2a10f1c10cead91fe706ff5dc52f06d642a upstream. When running relocation of a data block group while scrub is running in parallel, it is possible that the relocation will fail and abort the current transaction with an -EINVAL error: [134243.988595] BTRFS info (device sdc): found 14 extents, stage: move data extents [134243.999871] ------------[ cut here ]------------ [134244.000741] BTRFS: Transaction aborted (error -22) [134244.001692] WARNING: CPU: 0 PID: 26954 at fs/btrfs/ctree.c:1071 __btrfs_cow_block+0x6a7/0x790 [btrfs] [134244.003380] Modules linked in: btrfs blake2b_generic xor raid6_pq (...) [134244.012577] CPU: 0 PID: 26954 Comm: btrfs Tainted: G W 5.6.0-rc7-btrfs-next-58 #5 [134244.014162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [134244.016184] RIP: 0010:__btrfs_cow_block+0x6a7/0x790 [btrfs] [134244.017151] Code: 48 c7 c7 (...) [134244.020549] RSP: 0018:ffffa41607863888 EFLAGS: 00010286 [134244.021515] RAX: 0000000000000000 RBX: ffff9614bdfe09c8 RCX: 0000000000000000 [134244.022822] RDX: 0000000000000001 RSI: ffffffffb3d63980 RDI: 0000000000000001 [134244.024124] RBP: ffff961589e8c000 R08: 0000000000000000 R09: 0000000000000001 [134244.025424] R10: ffffffffc0ae5955 R11: 0000000000000000 R12: ffff9614bd530d08 [134244.026725] R13: ffff9614ced41b88 R14: ffff9614bdfe2a48 R15: 0000000000000000 [134244.028024] FS: 00007f29b63c08c0(0000) GS:ffff9615ba600000(0000) knlGS:0000000000000000 [134244.029491] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [134244.030560] CR2: 00007f4eb339b000 CR3: 0000000130d6e006 CR4: 00000000003606f0 [134244.031997] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [134244.033153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [134244.034484] Call Trace: [134244.034984] btrfs_cow_block+0x12b/0x2b0 [btrfs] [134244.035859] do_relocation+0x30b/0x790 [btrfs] [134244.036681] ? do_raw_spin_unlock+0x49/0xc0 [134244.037460] ? _raw_spin_unlock+0x29/0x40 [134244.038235] relocate_tree_blocks+0x37b/0x730 [btrfs] [134244.039245] relocate_block_group+0x388/0x770 [btrfs] [134244.040228] btrfs_relocate_block_group+0x161/0x2e0 [btrfs] [134244.041323] btrfs_relocate_chunk+0x36/0x110 [btrfs] [134244.041345] btrfs_balance+0xc06/0x1860 [btrfs] [134244.043382] ? btrfs_ioctl_balance+0x27c/0x310 [btrfs] [134244.045586] btrfs_ioctl_balance+0x1ed/0x310 [btrfs] [134244.045611] btrfs_ioctl+0x1880/0x3760 [btrfs] [134244.049043] ? do_raw_spin_unlock+0x49/0xc0 [134244.049838] ? _raw_spin_unlock+0x29/0x40 [134244.050587] ? __handle_mm_fault+0x11b3/0x14b0 [134244.051417] ? ksys_ioctl+0x92/0xb0 [134244.052070] ksys_ioctl+0x92/0xb0 [134244.052701] ? trace_hardirqs_off_thunk+0x1a/0x1c [134244.053511] __x64_sys_ioctl+0x16/0x20 [134244.054206] do_syscall_64+0x5c/0x280 [134244.054891] entry_SYSCALL_64_after_hwframe+0x49/0xbe [134244.055819] RIP: 0033:0x7f29b51c9dd7 [134244.056491] Code: 00 00 00 (...) [134244.059767] RSP: 002b:00007ffcccc1dd08 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [134244.061168] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f29b51c9dd7 [134244.062474] RDX: 00007ffcccc1dda0 RSI: 00000000c4009420 RDI: 0000000000000003 [134244.063771] RBP: 0000000000000003 R08: 00005565cea4b000 R09: 0000000000000000 [134244.065032] R10: 0000000000000541 R11: 0000000000000202 R12: 00007ffcccc2060a [134244.066327] R13: 00007ffcccc1dda0 R14: 0000000000000002 R15: 00007ffcccc1dec0 [134244.067626] irq event stamp: 0 [134244.068202] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [134244.069351] hardirqs last disabled at (0): [] copy_process+0x74f/0x2020 [134244.070909] softirqs last enabled at (0): [] copy_process+0x74f/0x2020 [134244.072392] softirqs last disabled at (0): [<0000000000000000>] 0x0 [134244.073432] ---[ end trace bd7c03622e0b0a99 ]--- The -EINVAL error comes from the following chain of function calls: __btrfs_cow_block() <-- aborts the transaction btrfs_reloc_cow_block() replace_file_extents() get_new_location() <-- returns -EINVAL When relocating a data block group, for each allocated extent of the block group, we preallocate another extent (at prealloc_file_extent_cluster()), associated with the data relocation inode, and then dirty all its pages. These preallocated extents have, and must have, the same size that extents from the data block group being relocated have. Later before we start the relocation stage that updates pointers (bytenr field of file extent items) to point to the the new extents, we trigger writeback for the data relocation inode. The expectation is that writeback will write the pages to the previously preallocated extents, that it follows the NOCOW path. That is generally the case, however, if a scrub is running it may have turned the block group that contains those extents into RO mode, in which case writeback falls back to the COW path. However in the COW path instead of allocating exactly one extent with the expected size, the allocator may end up allocating several smaller extents due to free space fragmentation - because we tell it at cow_file_range() that the minimum allocation size can match the filesystem's sector size. This later breaks the relocation's expectation that an extent associated to a file extent item in the data relocation inode has the same size as the respective extent pointed by a file extent item in another tree - in this case the extent to which the relocation inode poins to is smaller, causing relocation.c:get_new_location() to return -EINVAL. For example, if we are relocating a data block group X that has a logical address of X and the block group has an extent allocated at the logical address X + 128KiB with a size of 64KiB: 1) At prealloc_file_extent_cluster() we allocate an extent for the data relocation inode with a size of 64KiB and associate it to the file offset 128KiB (X + 128KiB - X) of the data relocation inode. This preallocated extent was allocated at block group Z; 2) A scrub running in parallel turns block group Z into RO mode and starts scrubing its extents; 3) Relocation triggers writeback for the data relocation inode; 4) When running delalloc (btrfs_run_delalloc_range()), we try first the NOCOW path because the data relocation inode has BTRFS_INODE_PREALLOC set in its flags. However, because block group Z is in RO mode, the NOCOW path (run_delalloc_nocow()) falls back into the COW path, by calling cow_file_range(); 5) At cow_file_range(), in the first iteration of the while loop we call btrfs_reserve_extent() to allocate a 64KiB extent and pass it a minimum allocation size of 4KiB (fs_info->sectorsize). Due to free space fragmentation, btrfs_reserve_extent() ends up allocating two extents of 32KiB each, each one on a different iteration of that while loop; 6) Writeback of the data relocation inode completes; 7) Relocation proceeds and ends up at relocation.c:replace_file_extents(), with a leaf which has a file extent item that points to the data extent from block group X, that has a logical address (bytenr) of X + 128KiB and a size of 64KiB. Then it calls get_new_location(), which does a lookup in the data relocation tree for a file extent item starting at offset 128KiB (X + 128KiB - X) and belonging to the data relocation inode. It finds a corresponding file extent item, however that item points to an extent that has a size of 32KiB, which doesn't match the expected size of 64KiB, resuling in -EINVAL being returned from this function and propagated up to __btrfs_cow_block(), which aborts the current transaction. To fix this make sure that at cow_file_range() when we call the allocator we pass it a minimum allocation size corresponding the desired extent size if the inode belongs to the data relocation tree, otherwise pass it the filesystem's sector size as the minimum allocation size. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/inode.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 887f9ebc2bc2..7ffb15b473a7 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -977,6 +977,7 @@ static noinline int cow_file_range(struct inode *inode, u64 num_bytes; unsigned long ram_size; u64 cur_alloc_size = 0; + u64 min_alloc_size; u64 blocksize = fs_info->sectorsize; struct btrfs_key ins; struct extent_map *em; @@ -1028,10 +1029,26 @@ static noinline int cow_file_range(struct inode *inode, btrfs_drop_extent_cache(BTRFS_I(inode), start, start + num_bytes - 1, 0); + /* + * Relocation relies on the relocated extents to have exactly the same + * size as the original extents. Normally writeback for relocation data + * extents follows a NOCOW path because relocation preallocates the + * extents. However, due to an operation such as scrub turning a block + * group to RO mode, it may fallback to COW mode, so we must make sure + * an extent allocated during COW has exactly the requested size and can + * not be split into smaller extents, otherwise relocation breaks and + * fails during the stage where it updates the bytenr of file extent + * items. + */ + if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID) + min_alloc_size = num_bytes; + else + min_alloc_size = fs_info->sectorsize; + while (num_bytes > 0) { cur_alloc_size = num_bytes; ret = btrfs_reserve_extent(root, cur_alloc_size, cur_alloc_size, - fs_info->sectorsize, 0, alloc_hint, + min_alloc_size, 0, alloc_hint, &ins, 1, 1); if (ret < 0) goto out_unlock; -- cgit v1.2.3 From e4b2fd3008058befb3fa8722a7dc2df4f54f40c2 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 15 Jun 2020 18:48:58 +0100 Subject: btrfs: fix failure of RWF_NOWAIT write into prealloc extent beyond eof commit 4b1946284dd6641afdb9457101056d9e6ee6204c upstream. If we attempt to write to prealloc extent located after eof using a RWF_NOWAIT write, we always fail with -EAGAIN. We do actually check if we have an allocated extent for the write at the start of btrfs_file_write_iter() through a call to check_can_nocow(), but later when we go into the actual direct IO write path we simply return -EAGAIN if the write starts at or beyond EOF. Trivial to reproduce: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ touch /mnt/foo $ chattr +C /mnt/foo $ xfs_io -d -c "pwrite -S 0xab 0 64K" /mnt/foo wrote 65536/65536 bytes at offset 0 64 KiB, 16 ops; 0.0004 sec (135.575 MiB/sec and 34707.1584 ops/sec) $ xfs_io -c "falloc -k 64K 1M" /mnt/foo $ xfs_io -d -c "pwrite -N -V 1 -S 0xfe -b 64K 64K 64K" /mnt/foo pwrite: Resource temporarily unavailable On xfs and ext4 the write succeeds, as expected. Fix this by removing the wrong check at btrfs_direct_IO(). Fixes: edf064e7c6fec3 ("btrfs: nowait aio support") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/inode.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 7ffb15b473a7..8dd2702ce859 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -8656,9 +8656,6 @@ static ssize_t btrfs_direct_IO(struct kiocb *iocb, struct iov_iter *iter) dio_data.overwrite = 1; inode_unlock(inode); relock = true; - } else if (iocb->ki_flags & IOCB_NOWAIT) { - ret = -EAGAIN; - goto out; } ret = btrfs_delalloc_reserve_space(inode, &data_reserved, offset, count); -- cgit v1.2.3 From 9ac47ed7c9090e0fd60b7a67f5611573b1410a95 Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Thu, 25 Jun 2020 20:29:52 -0700 Subject: mm/slab: use memzero_explicit() in kzfree() commit 8982ae527fbef170ef298650c15d55a9ccd33973 upstream. The kzfree() function is normally used to clear some sensitive information, like encryption keys, in the buffer before freeing it back to the pool. Memset() is currently used for buffer clearing. However unlikely, there is still a non-zero probability that the compiler may choose to optimize away the memory clearing especially if LTO is being used in the future. To make sure that this optimization will never happen, memzero_explicit(), which is introduced in v3.18, is now used in kzfree() to future-proof it. Link: http://lkml.kernel.org/r/20200616154311.12314-2-longman@redhat.com Fixes: 3ef0e5ba4673 ("slab: introduce kzfree()") Signed-off-by: Waiman Long Acked-by: Michal Hocko Cc: David Howells Cc: Jarkko Sakkinen Cc: James Morris Cc: "Serge E. Hallyn" Cc: Joe Perches Cc: Matthew Wilcox Cc: David Rientjes Cc: Johannes Weiner Cc: Dan Carpenter Cc: "Jason A . Donenfeld" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- mm/slab_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/slab_common.c b/mm/slab_common.c index 39e382acb0b8..b5776b1301f0 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -1540,7 +1540,7 @@ void kzfree(const void *p) if (unlikely(ZERO_OR_NULL_PTR(mem))) return; ks = ksize(mem); - memset(mem, 0, ks); + memzero_explicit(mem, ks); kfree(mem); } EXPORT_SYMBOL(kzfree); -- cgit v1.2.3 From 1a06c538b6de62169f53b290ad3a5e88aadf3741 Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 25 Jun 2020 20:29:30 -0700 Subject: ocfs2: avoid inode removal while nfsd is accessing it commit 4cd9973f9ff69e37dd0ba2bd6e6423f8179c329a upstream. Patch series "ocfs2: fix nfsd over ocfs2 issues", v2. This is a series of patches to fix issues on nfsd over ocfs2. patch 1 is to avoid inode removed while nfsd access it patch 2 & 3 is to fix a panic issue. This patch (of 4): When nfsd is getting file dentry using handle or parent dentry of some dentry, one cluster lock is used to avoid inode removed from other node, but it still could be removed from local node, so use a rw lock to avoid this. Link: http://lkml.kernel.org/r/20200616183829.87211-1-junxiao.bi@oracle.com Link: http://lkml.kernel.org/r/20200616183829.87211-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- fs/ocfs2/dlmglue.c | 17 ++++++++++++++++- fs/ocfs2/ocfs2.h | 1 + 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 178cb9e6772a..c141b06811a6 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -682,6 +682,12 @@ static void ocfs2_nfs_sync_lock_res_init(struct ocfs2_lock_res *res, &ocfs2_nfs_sync_lops, osb); } +static void ocfs2_nfs_sync_lock_init(struct ocfs2_super *osb) +{ + ocfs2_nfs_sync_lock_res_init(&osb->osb_nfs_sync_lockres, osb); + init_rwsem(&osb->nfs_sync_rwlock); +} + void ocfs2_trim_fs_lock_res_init(struct ocfs2_super *osb) { struct ocfs2_lock_res *lockres = &osb->osb_trim_fs_lockres; @@ -2851,6 +2857,11 @@ int ocfs2_nfs_sync_lock(struct ocfs2_super *osb, int ex) if (ocfs2_is_hard_readonly(osb)) return -EROFS; + if (ex) + down_write(&osb->nfs_sync_rwlock); + else + down_read(&osb->nfs_sync_rwlock); + if (ocfs2_mount_local(osb)) return 0; @@ -2869,6 +2880,10 @@ void ocfs2_nfs_sync_unlock(struct ocfs2_super *osb, int ex) if (!ocfs2_mount_local(osb)) ocfs2_cluster_unlock(osb, lockres, ex ? LKM_EXMODE : LKM_PRMODE); + if (ex) + up_write(&osb->nfs_sync_rwlock); + else + up_read(&osb->nfs_sync_rwlock); } int ocfs2_trim_fs_lock(struct ocfs2_super *osb, @@ -3314,7 +3329,7 @@ int ocfs2_dlm_init(struct ocfs2_super *osb) local: ocfs2_super_lock_res_init(&osb->osb_super_lockres, osb); ocfs2_rename_lock_res_init(&osb->osb_rename_lockres, osb); - ocfs2_nfs_sync_lock_res_init(&osb->osb_nfs_sync_lockres, osb); + ocfs2_nfs_sync_lock_init(osb); ocfs2_orphan_scan_lock_res_init(&osb->osb_orphan_scan.os_lockres, osb); osb->cconn = conn; diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 4f86ac0027b5..231933618300 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -406,6 +406,7 @@ struct ocfs2_super struct ocfs2_lock_res osb_super_lockres; struct ocfs2_lock_res osb_rename_lockres; struct ocfs2_lock_res osb_nfs_sync_lockres; + struct rw_semaphore nfs_sync_rwlock; struct ocfs2_lock_res osb_trim_fs_lockres; struct ocfs2_dlm_debug *osb_dlm_debug; -- cgit v1.2.3 From 0f4e2d6b65e265894342b10a1fd7a1f1a2c96381 Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 25 Jun 2020 20:29:33 -0700 Subject: ocfs2: load global_inode_alloc commit 7569d3c754e452769a5747eeeba488179e38a5da upstream. Set global_inode_alloc as OCFS2_FIRST_ONLINE_SYSTEM_INODE, that will make it load during mount. It can be used to test whether some global/system inodes are valid. One use case is that nfsd will test whether root inode is valid. Link: http://lkml.kernel.org/r/20200616183829.87211-3-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- fs/ocfs2/ocfs2_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 7071ad0dec90..263e28ebeeab 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -339,8 +339,8 @@ struct ocfs2_system_inode_info { enum { BAD_BLOCK_SYSTEM_INODE = 0, GLOBAL_INODE_ALLOC_SYSTEM_INODE, +#define OCFS2_FIRST_ONLINE_SYSTEM_INODE GLOBAL_INODE_ALLOC_SYSTEM_INODE SLOT_MAP_SYSTEM_INODE, -#define OCFS2_FIRST_ONLINE_SYSTEM_INODE SLOT_MAP_SYSTEM_INODE HEARTBEAT_SYSTEM_INODE, GLOBAL_BITMAP_SYSTEM_INODE, USER_QUOTA_SYSTEM_INODE, -- cgit v1.2.3 From 4d985f41d93631b2d43be352e236f1d6650f49ea Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 25 Jun 2020 20:29:40 -0700 Subject: ocfs2: fix value of OCFS2_INVALID_SLOT commit 9277f8334ffc719fe922d776444d6e4e884dbf30 upstream. In the ocfs2 disk layout, slot number is 16 bits, but in ocfs2 implementation, slot number is 32 bits. Usually this will not cause any issue, because slot number is converted from u16 to u32, but OCFS2_INVALID_SLOT was defined as -1, when an invalid slot number from disk was obtained, its value was (u16)-1, and it was converted to u32. Then the following checking in get_local_system_inode will be always skipped: static struct inode **get_local_system_inode(struct ocfs2_super *osb, int type, u32 slot) { BUG_ON(slot == OCFS2_INVALID_SLOT); ... } Link: http://lkml.kernel.org/r/20200616183829.87211-5-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- fs/ocfs2/ocfs2_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 263e28ebeeab..d50b7f2c7395 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -303,7 +303,7 @@ #define OCFS2_MAX_SLOTS 255 /* Slot map indicator for an empty slot */ -#define OCFS2_INVALID_SLOT -1 +#define OCFS2_INVALID_SLOT ((u16)-1) #define OCFS2_VOL_UUID_LEN 16 #define OCFS2_MAX_VOL_LABEL_LEN 64 -- cgit v1.2.3 From 6306edad05741c2371765dd9fcd8d69b391a95b7 Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 25 Jun 2020 20:29:37 -0700 Subject: ocfs2: fix panic on nfs server over ocfs2 commit e5a15e17a78d58f933d17cafedfcf7486a29f5b4 upstream. The following kernel panic was captured when running nfs server over ocfs2, at that time ocfs2_test_inode_bit() was checking whether one inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its "suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from //global_inode_alloc, but here it wrongly assumed that it was got from per slot inode alloctor which would cause array overflow and trigger kernel panic. BUG: unable to handle kernel paging request at 0000000000001088 IP: [] _raw_spin_lock+0x18/0xf0 PGD 1e06ba067 PUD 1e9e7d067 PMD 0 Oops: 0002 [#1] SMP CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 #2 Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018 RIP: _raw_spin_lock+0x18/0xf0 RSP: e02b:ffff88005ae97908 EFLAGS: 00010206 RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000 RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088 RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00 R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088 R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff FS: 0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660 Call Trace: igrab+0x1e/0x60 ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2] ocfs2_test_inode_bit+0x328/0xa00 [ocfs2] ocfs2_get_parent+0xba/0x3e0 [ocfs2] reconnect_path+0xb5/0x300 exportfs_decode_fh+0xf6/0x2b0 fh_verify+0x350/0x660 [nfsd] nfsd4_putfh+0x4d/0x60 [nfsd] nfsd4_proc_compound+0x3d3/0x6f0 [nfsd] nfsd_dispatch+0xe0/0x290 [nfsd] svc_process_common+0x412/0x6a0 [sunrpc] svc_process+0x123/0x210 [sunrpc] nfsd+0xff/0x170 [nfsd] kthread+0xcb/0xf0 ret_from_fork+0x61/0x90 Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6 RIP _raw_spin_lock+0x18/0xf0 CR2: 0000000000001088 ---[ end trace 7264463cd1aac8f9 ]--- Kernel panic - not syncing: Fatal exception Link: http://lkml.kernel.org/r/20200616183829.87211-4-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- fs/ocfs2/suballoc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index f7c972fbed6a..15a89c513da2 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -2841,9 +2841,12 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res) goto bail; } - inode_alloc_inode = - ocfs2_get_system_file_inode(osb, INODE_ALLOC_SYSTEM_INODE, - suballoc_slot); + if (suballoc_slot == (u16)OCFS2_INVALID_SLOT) + inode_alloc_inode = ocfs2_get_system_file_inode(osb, + GLOBAL_INODE_ALLOC_SYSTEM_INODE, suballoc_slot); + else + inode_alloc_inode = ocfs2_get_system_file_inode(osb, + INODE_ALLOC_SYSTEM_INODE, suballoc_slot); if (!inode_alloc_inode) { /* the error code could be inaccurate, but we are not able to * get the correct one. */ -- cgit v1.2.3 From 77d09ad32d72b00c7b961864755694e3958628e1 Mon Sep 17 00:00:00 2001 From: Jiping Ma Date: Mon, 11 May 2020 10:52:07 +0800 Subject: arm64: perf: Report the PC value in REGS_ABI_32 mode commit 8dfe804a4031ca6ba3a3efb2048534249b64f3a5 upstream. A 32-bit perf querying the registers of a compat task using REGS_ABI_32 will receive zeroes from w15, when it expects to find the PC. Return the PC value for register dwarf register 15 when returning register values for a compat task to perf. Cc: Acked-by: Mark Rutland Signed-off-by: Jiping Ma Link: https://lore.kernel.org/r/1589165527-188401-1-git-send-email-jiping.ma2@windriver.com [will: Shuffled code and added a comment] Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman --- arch/arm64/kernel/perf_regs.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c index 0bbac612146e..666b225aeb3a 100644 --- a/arch/arm64/kernel/perf_regs.c +++ b/arch/arm64/kernel/perf_regs.c @@ -15,15 +15,34 @@ u64 perf_reg_value(struct pt_regs *regs, int idx) return 0; /* - * Compat (i.e. 32 bit) mode: - * - PC has been set in the pt_regs struct in kernel_entry, - * - Handle SP and LR here. + * Our handling of compat tasks (PERF_SAMPLE_REGS_ABI_32) is weird, but + * we're stuck with it for ABI compatability reasons. + * + * For a 32-bit consumer inspecting a 32-bit task, then it will look at + * the first 16 registers (see arch/arm/include/uapi/asm/perf_regs.h). + * These correspond directly to a prefix of the registers saved in our + * 'struct pt_regs', with the exception of the PC, so we copy that down + * (x15 corresponds to SP_hyp in the architecture). + * + * So far, so good. + * + * The oddity arises when a 64-bit consumer looks at a 32-bit task and + * asks for registers beyond PERF_REG_ARM_MAX. In this case, we return + * SP_usr, LR_usr and PC in the positions where the AArch64 SP, LR and + * PC registers would normally live. The initial idea was to allow a + * 64-bit unwinder to unwind a 32-bit task and, although it's not clear + * how well that works in practice, somebody might be relying on it. + * + * At the time we make a sample, we don't know whether the consumer is + * 32-bit or 64-bit, so we have to cater for both possibilities. */ if (compat_user_mode(regs)) { if ((u32)idx == PERF_REG_ARM64_SP) return regs->compat_sp; if ((u32)idx == PERF_REG_ARM64_LR) return regs->compat_lr; + if (idx == 15) + return regs->pc; } if ((u32)idx == PERF_REG_ARM64_SP) -- cgit v1.2.3 From e8f436c0f1c3bd7362d89e94dec8564cf2746ab3 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sat, 20 Jun 2020 12:46:03 +0900 Subject: tracing: Fix event trigger to accept redundant spaces commit 6784beada631800f2c5afd567e5628c843362cee upstream. Fix the event trigger to accept redundant spaces in the trigger input. For example, these return -EINVAL echo " traceon" > events/ftrace/print/trigger echo "traceon if common_pid == 0" > events/ftrace/print/trigger echo "disable_event:kmem:kmalloc " > events/ftrace/print/trigger But these are hard to find what is wrong. To fix this issue, use skip_spaces() to remove spaces in front of actual tokens, and set NULL if there is no token. Link: http://lkml.kernel.org/r/159262476352.185015.5261566783045364186.stgit@devnote2 Cc: Tom Zanussi Cc: stable@vger.kernel.org Fixes: 85f2b08268c0 ("tracing: Add basic event trigger framework") Reviewed-by: Tom Zanussi Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman --- kernel/trace/trace_events_trigger.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index 38a2a558e546..0c3b1551cfca 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -211,11 +211,17 @@ static int event_trigger_regex_open(struct inode *inode, struct file *file) static int trigger_process_regex(struct trace_event_file *file, char *buff) { - char *command, *next = buff; + char *command, *next; struct event_command *p; int ret = -EINVAL; + next = buff = skip_spaces(buff); command = strsep(&next, ": \t"); + if (next) { + next = skip_spaces(next); + if (!*next) + next = NULL; + } command = (command[0] != '!') ? command : command + 1; mutex_lock(&trigger_cmd_mutex); @@ -624,8 +630,14 @@ event_trigger_callback(struct event_command *cmd_ops, int ret; /* separate the trigger from the filter (t:n [if filter]) */ - if (param && isdigit(param[0])) + if (param && isdigit(param[0])) { trigger = strsep(¶m, " \t"); + if (param) { + param = skip_spaces(param); + if (!*param) + param = NULL; + } + } trigger_ops = cmd_ops->get_trigger_ops(cmd, trigger); @@ -1361,6 +1373,11 @@ int event_enable_trigger_func(struct event_command *cmd_ops, trigger = strsep(¶m, " \t"); if (!trigger) return -EINVAL; + if (param) { + param = skip_spaces(param); + if (!*param) + param = NULL; + } system = strsep(&trigger, ":"); if (!trigger) -- cgit v1.2.3 From a1de4067516d1fbf20a08c0b68e8e8e70f39c3c8 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Mon, 22 Jun 2020 15:18:15 -0400 Subject: ring-buffer: Zero out time extend if it is nested and not absolute commit 097350d1c6e1f5808cae142006f18a0bbc57018d upstream. Currently the ring buffer makes events that happen in interrupts that preempt another event have a delta of zero. (Hopefully we can change this soon). But this is to deal with the races of updating a global counter with lockless and nesting functions updating deltas. With the addition of absolute time stamps, the time extend didn't follow this rule. A time extend can happen if two events happen longer than 2^27 nanoseconds appart, as the delta time field in each event is only 27 bits. If that happens, then a time extend is injected with 2^59 bits of nanoseconds to use (18 years). But if the 2^27 nanoseconds happen between two events, and as it is writing the event, an interrupt triggers, it will see the 2^27 difference as well and inject a time extend of its own. But a recent change made the time extend logic not take into account the nesting, and this can cause two time extend deltas to happen moving the time stamp much further ahead than the current time. This gets all reset when the ring buffer moves to the next page, but that can cause time to appear to go backwards. This was observed in a trace-cmd recording, and since the data is saved in a file, with trace-cmd report --debug, it was possible to see that this indeed did happen! bash-52501 110d... 81778.908247: sched_switch: bash:52501 [120] S ==> swapper/110:0 [120] [12770284:0x2e8:64] -0 110d... 81778.908757: sched_switch: swapper/110:0 [120] R ==> bash:52501 [120] [509947:0x32c:64] TIME EXTEND: delta:306454770 length:0 bash-52501 110.... 81779.215212: sched_swap_numa: src_pid=52501 src_tgid=52388 src_ngid=52501 src_cpu=110 src_nid=2 dst_pid=52509 dst_tgid=52388 dst_ngid=52501 dst_cpu=49 dst_nid=1 [0:0x378:48] TIME EXTEND: delta:306458165 length:0 bash-52501 110dNh. 81779.521670: sched_wakeup: migration/110:565 [0] success=1 CPU:110 [0:0x3b4:40] and at the next page, caused the time to go backwards: bash-52504 110d... 81779.685411: sched_switch: bash:52504 [120] S ==> swapper/110:0 [120] [8347057:0xfb4:64] CPU:110 [SUBBUFFER START] [81779379165886:0x1320000] -0 110dN.. 81779.379166: sched_wakeup: bash:52504 [120] success=1 CPU:110 [0:0x10:40] -0 110d... 81779.379167: sched_switch: swapper/110:0 [120] R ==> bash:52504 [120] [1168:0x3c:64] Link: https://lkml.kernel.org/r/20200622151815.345d1bf5@oasis.local.home Cc: Ingo Molnar Cc: Andrew Morton Cc: Tom Zanussi Cc: stable@vger.kernel.org Fixes: dc4e2801d400b ("ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP") Reported-by: Julia Lawall Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman --- kernel/trace/ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 805aef83b5cf..564d22691dd7 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2333,7 +2333,7 @@ rb_update_event(struct ring_buffer_per_cpu *cpu_buffer, if (unlikely(info->add_timestamp)) { bool abs = ring_buffer_time_stamp_abs(cpu_buffer->buffer); - event = rb_add_time_stamp(event, info->delta, abs); + event = rb_add_time_stamp(event, abs ? info->delta : delta, abs); length -= RB_LEN_TIME_EXTEND; delta = 0; } -- cgit v1.2.3 From 71cf93ea0c78edeed61c63b36dceac9c74889536 Mon Sep 17 00:00:00 2001 From: Daniel Gomez Date: Mon, 18 May 2020 22:16:46 +0200 Subject: drm: rcar-du: Fix build error commit 5f9af404eec82981c4345c9943be48422234e7ab upstream. Select DRM_KMS_HELPER dependency. Build error when DRM_KMS_HELPER is not selected: drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd48): undefined reference to `drm_atomic_helper_bridge_duplicate_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd50): undefined reference to `drm_atomic_helper_bridge_destroy_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd70): undefined reference to `drm_atomic_helper_bridge_reset' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xdc8): undefined reference to `drm_atomic_helper_connector_reset' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xde0): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe08): undefined reference to `drm_atomic_helper_connector_duplicate_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe10): undefined reference to `drm_atomic_helper_connector_destroy_state' Fixes: c6a27fa41fab ("drm: rcar-du: Convert LVDS encoder code to bridge driver") Cc: Signed-off-by: Daniel Gomez Reviewed-by: Emil Velikov Reviewed-by: Kieran Bingham Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/rcar-du/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig index edde8d4b87a3..ddda84cdeb47 100644 --- a/drivers/gpu/drm/rcar-du/Kconfig +++ b/drivers/gpu/drm/rcar-du/Kconfig @@ -21,6 +21,7 @@ config DRM_RCAR_DW_HDMI config DRM_RCAR_LVDS tristate "R-Car DU LVDS Encoder Support" depends on DRM && DRM_BRIDGE && OF + select DRM_KMS_HELPER select DRM_PANEL select OF_FLATTREE select OF_OVERLAY -- cgit v1.2.3 From a083deda0b4179fb6780bc53d900794c4952339f Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Mon, 22 Jun 2020 23:31:22 +0300 Subject: drm/radeon: fix fb_div check in ni_init_smc_spll_table() commit 35f760b44b1b9cb16a306bdcc7220fbbf78c4789 upstream. clk_s is checked twice in a row in ni_init_smc_spll_table(). fb_div should be checked instead. Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/radeon/ni_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/ni_dpm.c b/drivers/gpu/drm/radeon/ni_dpm.c index 0fd8d6ba9828..f86ca163dcf3 100644 --- a/drivers/gpu/drm/radeon/ni_dpm.c +++ b/drivers/gpu/drm/radeon/ni_dpm.c @@ -2126,7 +2126,7 @@ static int ni_init_smc_spll_table(struct radeon_device *rdev) if (clk_s & ~(SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_SHIFT)) ret = -EINVAL; - if (clk_s & ~(SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_SHIFT)) + if (fb_div & ~(SMC_NISLANDS_SPLL_DIV_TABLE_FBDIV_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_FBDIV_SHIFT)) ret = -EINVAL; if (clk_v & ~(SMC_NISLANDS_SPLL_DIV_TABLE_CLKV_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_CLKV_SHIFT)) -- cgit v1.2.3 From 3fe2a013bb77166c7c6fc1a06a2a82402b649324 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 3 Jun 2020 13:19:58 +0300 Subject: Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate() commit b65a2d8c8614386f7e8d38ea150749f8a862f431 upstream. The "ie_len" variable is in the 0-255 range and it comes from the network. If it's over NDIS_802_11_LENGTH_RATES_EX (16) then that will lead to memory corruption. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Dan Carpenter Cc: stable Link: https://lore.kernel.org/r/20200603101958.GA1845750@mwanda Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8723bs/core/rtw_wlan_util.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/rtl8723bs/core/rtw_wlan_util.c b/drivers/staging/rtl8723bs/core/rtw_wlan_util.c index 2c65af319a60..6c6bf03ac38a 100644 --- a/drivers/staging/rtl8723bs/core/rtw_wlan_util.c +++ b/drivers/staging/rtl8723bs/core/rtw_wlan_util.c @@ -1856,12 +1856,14 @@ int update_sta_support_rate(struct adapter *padapter, u8 *pvar_ie, uint var_ie_l pIE = (struct ndis_80211_var_ie *)rtw_get_ie(pvar_ie, _SUPPORTEDRATES_IE_, &ie_len, var_ie_len); if (!pIE) return _FAIL; + if (ie_len > sizeof(pmlmeinfo->FW_sta_info[cam_idx].SupportedRates)) + return _FAIL; memcpy(pmlmeinfo->FW_sta_info[cam_idx].SupportedRates, pIE->data, ie_len); supportRateNum = ie_len; pIE = (struct ndis_80211_var_ie *)rtw_get_ie(pvar_ie, _EXT_SUPPORTEDRATES_IE_, &ie_len, var_ie_len); - if (pIE) + if (pIE && (ie_len <= sizeof(pmlmeinfo->FW_sta_info[cam_idx].SupportedRates) - supportRateNum)) memcpy((pmlmeinfo->FW_sta_info[cam_idx].SupportedRates + supportRateNum), pIE->data, ie_len); return _SUCCESS; -- cgit v1.2.3 From 3c2f9ef94dc38fcc8097ffc06dad94764b1e7ada Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Mon, 1 Jun 2020 11:54:57 +0300 Subject: sunrpc: fixed rollback in rpc_gssd_dummy_populate() commit b7ade38165ca0001c5a3bd5314a314abbbfbb1b7 upstream. __rpc_depopulate(gssd_dentry) was lost on error path cc: stable@vger.kernel.org Fixes: commit 4b9a445e3eeb ("sunrpc: create a new dummy pipe for gssd to hold open") Signed-off-by: Vasily Averin Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman --- net/sunrpc/rpc_pipe.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 4fda18d47e2c..285eab5b43c8 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -1331,6 +1331,7 @@ rpc_gssd_dummy_populate(struct dentry *root, struct rpc_pipe *pipe_data) q.len = strlen(gssd_dummy_clnt_dir[0].name); clnt_dentry = d_hash_and_lookup(gssd_dentry, &q); if (!clnt_dentry) { + __rpc_depopulate(gssd_dentry, gssd_dummy_clnt_dir, 0, 1); pipe_dentry = ERR_PTR(-ENOENT); goto out; } -- cgit v1.2.3 From 0ebb986361f01bffd2b53d6e7ba89899753a3252 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Jun 2020 11:32:34 -0400 Subject: SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment() commit 89a3c9f5b9f0bcaa9aea3e8b2a616fcaea9aad78 upstream. @subbuf is an output parameter of xdr_buf_subsegment(). A survey of call sites shows that @subbuf is always uninitialized before xdr_buf_segment() is invoked by callers. There are some execution paths through xdr_buf_subsegment() that do not set all of the fields in @subbuf, leaving some pointer fields containing garbage addresses. Subsequent processing of that buffer then results in a page fault. Signed-off-by: Chuck Lever Cc: Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman --- net/sunrpc/xdr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c index ac16f509c95c..540e340e2565 100644 --- a/net/sunrpc/xdr.c +++ b/net/sunrpc/xdr.c @@ -1036,6 +1036,7 @@ xdr_buf_subsegment(struct xdr_buf *buf, struct xdr_buf *subbuf, base = 0; } else { base -= buf->head[0].iov_len; + subbuf->head[0].iov_base = buf->head[0].iov_base; subbuf->head[0].iov_len = 0; } @@ -1048,6 +1049,8 @@ xdr_buf_subsegment(struct xdr_buf *buf, struct xdr_buf *subbuf, base = 0; } else { base -= buf->page_len; + subbuf->pages = buf->pages; + subbuf->page_base = 0; subbuf->page_len = 0; } @@ -1059,6 +1062,7 @@ xdr_buf_subsegment(struct xdr_buf *buf, struct xdr_buf *subbuf, base = 0; } else { base -= buf->tail[0].iov_len; + subbuf->tail[0].iov_base = buf->tail[0].iov_base; subbuf->tail[0].iov_len = 0; } -- cgit v1.2.3 From e6efe9b152c5188cd2fcd817b7edf73c5dcccc20 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 22 Jun 2020 15:04:15 -0400 Subject: pNFS/flexfiles: Fix list corruption if the mirror count changes commit 8b04013737341442ed914b336cde866b902664ae upstream. If the mirror count changes in the new layout we pick up inside ff_layout_pg_init_write(), then we can end up adding the request to the wrong mirror and corrupting the mirror->pg_list. Fixes: d600ad1f2bdb ("NFS41: pop some layoutget errors to application") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman --- fs/nfs/flexfilelayout/flexfilelayout.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c index e0fe9a0f1bf1..d8cba46a9395 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.c +++ b/fs/nfs/flexfilelayout/flexfilelayout.c @@ -915,9 +915,8 @@ retry: goto out_mds; /* Use a direct mapping of ds_idx to pgio mirror_idx */ - if (WARN_ON_ONCE(pgio->pg_mirror_count != - FF_LAYOUT_MIRROR_COUNT(pgio->pg_lseg))) - goto out_mds; + if (pgio->pg_mirror_count != FF_LAYOUT_MIRROR_COUNT(pgio->pg_lseg)) + goto out_eagain; for (i = 0; i < pgio->pg_mirror_count; i++) { ds = nfs4_ff_layout_prepare_ds(pgio->pg_lseg, i, true); @@ -936,11 +935,15 @@ retry: } return; - +out_eagain: + pnfs_generic_pg_cleanup(pgio); + pgio->pg_error = -EAGAIN; + return; out_mds: pnfs_put_lseg(pgio->pg_lseg); pgio->pg_lseg = NULL; nfs_pageio_reset_write_mds(pgio); + pgio->pg_error = -EAGAIN; } static unsigned int -- cgit v1.2.3 From e66a37c80e8ca9457d5dbd71e7d34091b894cfa1 Mon Sep 17 00:00:00 2001 From: Olga Kornievskaia Date: Wed, 24 Jun 2020 13:54:08 -0400 Subject: NFSv4 fix CLOSE not waiting for direct IO compeletion commit d03727b248d0dae6199569a8d7b629a681154633 upstream. Figuring out the root case for the REMOVE/CLOSE race and suggesting the solution was done by Neil Brown. Currently what happens is that direct IO calls hold a reference on the open context which is decremented as an asynchronous task in the nfs_direct_complete(). Before reference is decremented, control is returned to the application which is free to close the file. When close is being processed, it decrements its reference on the open_context but since directIO still holds one, it doesn't sent a close on the wire. It returns control to the application which is free to do other operations. For instance, it can delete a file. Direct IO is finally releasing its reference and triggering an asynchronous close. Which races with the REMOVE. On the server, REMOVE can be processed before the CLOSE, failing the REMOVE with EACCES as the file is still opened. Signed-off-by: Olga Kornievskaia Suggested-by: Neil Brown CC: stable@vger.kernel.org Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman --- fs/nfs/direct.c | 13 +++++++++---- fs/nfs/file.c | 1 + 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index e5da9d7fb69e..1e883df26d4a 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -396,8 +396,6 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq) { struct inode *inode = dreq->inode; - inode_dio_end(inode); - if (dreq->iocb) { long res = (long) dreq->error; if (dreq->count != 0) { @@ -409,7 +407,10 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq) complete(&dreq->completion); + igrab(inode); nfs_direct_req_release(dreq); + inode_dio_end(inode); + iput(inode); } static void nfs_direct_read_completion(struct nfs_pgio_header *hdr) @@ -539,8 +540,10 @@ static ssize_t nfs_direct_read_schedule_iovec(struct nfs_direct_req *dreq, * generic layer handle the completion. */ if (requested_bytes == 0) { - inode_dio_end(inode); + igrab(inode); nfs_direct_req_release(dreq); + inode_dio_end(inode); + iput(inode); return result < 0 ? result : -EIO; } @@ -957,8 +960,10 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq, * generic layer handle the completion. */ if (requested_bytes == 0) { - inode_dio_end(inode); + igrab(inode); nfs_direct_req_release(dreq); + inode_dio_end(inode); + iput(inode); return result < 0 ? result : -EIO; } diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 29553fdba8af..b2257fa209ac 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -82,6 +82,7 @@ nfs_file_release(struct inode *inode, struct file *filp) dprintk("NFS: release(%pD2)\n", filp); nfs_inc_stats(inode, NFSIOS_VFSRELEASE); + inode_dio_wait(inode); nfs_file_clear_open_context(filp); return 0; } -- cgit v1.2.3 From a33e2d0aa4e265ae5ea06778516b863b17a7c737 Mon Sep 17 00:00:00 2001 From: Huaisheng Ye Date: Fri, 12 Jun 2020 23:59:11 +0800 Subject: dm writecache: correct uncommitted_block when discarding uncommitted entry commit 39495b12ef1cf602e6abd350dce2ef4199906531 upstream. When uncommitted entry has been discarded, correct wc->uncommitted_block for getting the exact number. Fixes: 48debafe4f2fe ("dm: add writecache target") Cc: stable@vger.kernel.org Signed-off-by: Huaisheng Ye Acked-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm-writecache.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index 4321c48eba6b..509552fc55fc 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -811,6 +811,8 @@ static void writecache_discard(struct dm_writecache *wc, sector_t start, sector_ writecache_wait_for_ios(wc, WRITE); discarded_something = true; } + if (!writecache_entry_is_committed(wc, e)) + wc->uncommitted_blocks--; writecache_free_entry(wc, e); } -- cgit v1.2.3 From 6cd52ae3868b677052ef749a424a7d9ecdc2db08 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 19 Jun 2020 11:51:34 -0400 Subject: dm writecache: add cond_resched to loop in persistent_memory_claim() commit d35bd764e6899a7bea71958f08d16cea5bfa1919 upstream. Add cond_resched() to a loop that fills in the mapper memory area because the loop can be executed many times. Fixes: 48debafe4f2fe ("dm: add writecache target") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm-writecache.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index 509552fc55fc..cc028353f9d5 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -281,6 +281,8 @@ static int persistent_memory_claim(struct dm_writecache *wc) while (daa-- && i < p) { pages[i++] = pfn_t_to_page(pfn); pfn.val++; + if (!(i & 15)) + cond_resched(); } } while (i < p); wc->memory_map = vmap(pages, p, VM_MAP, PAGE_KERNEL); -- cgit v1.2.3 From 135eccd83909e75389a5754577b0336bbd0939ef Mon Sep 17 00:00:00 2001 From: Zheng Bin Date: Fri, 21 Feb 2020 07:38:20 -0800 Subject: xfs: add agf freeblocks verify in xfs_agf_verify [ Upstream commit d0c7feaf87678371c2c09b3709400be416b2dc62 ] We recently used fuzz(hydra) to test XFS and automatically generate tmp.img(XFS v5 format, but some metadata is wrong) xfs_repair information(just one AG): agf_freeblks 0, counted 3224 in ag 0 agf_longest 536874136, counted 3224 in ag 0 sb_fdblocks 613, counted 3228 Test as follows: mount tmp.img tmpdir cp file1M tmpdir sync In 4.19-stable, sync will stuck, the reason is: xfs_mountfs xfs_check_summary_counts if ((!xfs_sb_version_haslazysbcount(&mp->m_sb) || XFS_LAST_UNMOUNT_WAS_CLEAN(mp)) && !xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS)) return 0; -->just return, incore sb_fdblocks still be 613 xfs_initialize_perag_data cp file1M tmpdir -->ok(write file to pagecache) sync -->stuck(write pagecache to disk) xfs_map_blocks xfs_iomap_write_allocate while (count_fsb != 0) { nimaps = 0; while (nimaps == 0) { --> endless loop nimaps = 1; xfs_bmapi_write(..., &nimaps) --> nimaps becomes 0 again xfs_bmapi_write xfs_bmap_alloc xfs_bmap_btalloc xfs_alloc_vextent xfs_alloc_fix_freelist xfs_alloc_space_available -->fail(agf_freeblks is 0) In linux-next, sync not stuck, cause commit c2b3164320b5 ("xfs: use the latest extent at writeback delalloc conversion time") remove the above while, dmesg is as follows: [ 55.250114] XFS (loop0): page discard on page ffffea0008bc7380, inode 0x1b0c, offset 0. Users do not know why this page is discard, the better soultion is: 1. Like xfs_repair, make sure sb_fdblocks is equal to counted (xfs_initialize_perag_data did this, who is not called at this mount) 2. Add agf verify, if fail, will tell users to repair This patch use the second soultion. Signed-off-by: Zheng Bin Signed-off-by: Ren Xudong Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Sasha Levin --- fs/xfs/libxfs/xfs_alloc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c index e1c0c0d2f1b0..1eb7933dac83 100644 --- a/fs/xfs/libxfs/xfs_alloc.c +++ b/fs/xfs/libxfs/xfs_alloc.c @@ -2596,6 +2596,13 @@ xfs_agf_verify( be32_to_cpu(agf->agf_flcount) <= xfs_agfl_size(mp))) return __this_address; + if (be32_to_cpu(agf->agf_length) > mp->m_sb.sb_dblocks) + return __this_address; + + if (be32_to_cpu(agf->agf_freeblks) < be32_to_cpu(agf->agf_longest) || + be32_to_cpu(agf->agf_freeblks) > be32_to_cpu(agf->agf_length)) + return __this_address; + if (be32_to_cpu(agf->agf_levels[XFS_BTNUM_BNO]) < 1 || be32_to_cpu(agf->agf_levels[XFS_BTNUM_CNT]) < 1 || be32_to_cpu(agf->agf_levels[XFS_BTNUM_BNO]) > XFS_BTREE_MAXLEVELS || @@ -2607,6 +2614,10 @@ xfs_agf_verify( be32_to_cpu(agf->agf_levels[XFS_BTNUM_RMAP]) > XFS_BTREE_MAXLEVELS)) return __this_address; + if (xfs_sb_version_hasrmapbt(&mp->m_sb) && + be32_to_cpu(agf->agf_rmap_blocks) > be32_to_cpu(agf->agf_length)) + return __this_address; + /* * during growfs operations, the perag is not fully initialised, * so we can't use it for any useful checking. growfs ensures we can't @@ -2620,6 +2631,11 @@ xfs_agf_verify( be32_to_cpu(agf->agf_btreeblks) > be32_to_cpu(agf->agf_length)) return __this_address; + if (xfs_sb_version_hasreflink(&mp->m_sb) && + be32_to_cpu(agf->agf_refcount_blocks) > + be32_to_cpu(agf->agf_length)) + return __this_address; + if (xfs_sb_version_hasreflink(&mp->m_sb) && (be32_to_cpu(agf->agf_refcount_level) < 1 || be32_to_cpu(agf->agf_refcount_level) > XFS_BTREE_MAXLEVELS)) -- cgit v1.2.3 From b25ed4a1de23263d3f1b860eb74af442a5fa42ff Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 12 May 2020 10:22:44 +0200 Subject: Revert "tty: hvc: Fix data abort due to race in hvc_open" commit cf9c94456ebafc6d75a834e58dfdc8ae71a3acbc upstream. This reverts commit e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe. In discussion on the mailing list, it has been determined that this is not the correct type of fix for this issue. Revert it so that we can do this correctly. Reported-by: Jiri Slaby Reported-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org Cc: Raghavendra Rao Ananta Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_console.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index f8e43a6faea9..cdcc64ea2554 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -75,8 +75,6 @@ static LIST_HEAD(hvc_structs); */ static DEFINE_MUTEX(hvc_structs_mutex); -/* Mutex to serialize hvc_open */ -static DEFINE_MUTEX(hvc_open_mutex); /* * This value is used to assign a tty->index value to a hvc_struct based * upon order of exposure via hvc_probe(), when we can not match it to @@ -348,24 +346,16 @@ static int hvc_install(struct tty_driver *driver, struct tty_struct *tty) */ static int hvc_open(struct tty_struct *tty, struct file * filp) { - struct hvc_struct *hp; + struct hvc_struct *hp = tty->driver_data; unsigned long flags; int rc = 0; - mutex_lock(&hvc_open_mutex); - - hp = tty->driver_data; - if (!hp) { - rc = -EIO; - goto out; - } - spin_lock_irqsave(&hp->port.lock, flags); /* Check and then increment for fast path open. */ if (hp->port.count++ > 0) { spin_unlock_irqrestore(&hp->port.lock, flags); hvc_kick(); - goto out; + return 0; } /* else count == 0 */ spin_unlock_irqrestore(&hp->port.lock, flags); @@ -393,8 +383,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) /* Force wakeup of the polling thread */ hvc_kick(); -out: - mutex_unlock(&hvc_open_mutex); return rc; } -- cgit v1.2.3 From 399849e4654ea496a6217ba4e5ee3d304c995ab4 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 30 Jun 2020 23:20:17 -0400 Subject: Linux 4.19.131 Signed-off-by: Sasha Levin --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6443cbd51f70..605a6a2e03dc 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 PATCHLEVEL = 19 -SUBLEVEL = 130 +SUBLEVEL = 131 EXTRAVERSION = NAME = "People's Front" -- cgit v1.2.3