aboutsummaryrefslogtreecommitdiff
path: root/fs/ubifs
AgeCommit message (Collapse)Author
2011-05-02UBIFS: seek journal heads to the latest bud in replayArtem Bityutskiy
This is the second fix of the following symptom: UBIFS error (pid 34456): could not find an empty LEB which sometimes happens after power cuts when we mount the file-system - UBIFS refuses it with the above error message which comes from the 'ubifs_rcvry_gc_commit()' function. I can reproduce this using the integck test with the UBIFS power cut emulation enabled. Analysis of the problem. Currently UBIFS replay seeks the journal heads to the last _replayed_ bud. But the buds are replayed out-of-order, so the replay basically seeks journal heads to the "random" bud belonging to this head, and not to the _last_ one. The result of this is that the GC head may be seeked to a full LEB with no free space, or very little free space. And 'ubifs_rcvry_gc_commit()' tries to find a fully or mostly dirty LEB to match the current GC head (because we need to garbage-collect that dirty LEB at one go, because we do not have @c->gc_lnum). So 'ubifs_find_dirty_leb()' fails and we fall back to finding an empty LEB and also fail. As a result - recovery fails and mounting fails. This patch teaches the replay to initialize the GC heads exactly to the latest buds, i.e. the buds which have the largest sequence number in corresponding log reference nodes. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
2011-05-02UBIFS: do not free write-buffers when in R/O modeArtem Bityutskiy
Currently UBIFS has a small optimization - it frees write-buffers when it is re-mounted from R/W mode to R/O mode. Of course, when it is mounted R/O, it does not allocate write-buffers as well. This optimization is nice but it leads to subtle problems and complications in recovery, which I can reproduce using the integck test. The symptoms are that after a power cut the file-system cannot be mounted if we first mount it R/O, and then re-mount R/W - 'ubifs_rcvry_gc_commit()' prints: UBIFS error (pid 34456): could not find an empty LEB Analysis of the problem. When mounting R/W, the reply process sets journal heads to buds [1], but when mounting R/O - it does not do this, because the write-buffers are not allocated. So 'ubifs_rcvry_gc_commit()' works completely differently for the same file-system but for the following 2 cases: 1. mounting R/W after a power cut and recover 2. mounting R/O after a power cut, re-mounting R/W and run deferred recovery In the former case, we have journal heads seeked to the a bud, in the latter case, they are non-seeked (wbuf->lnum == -1). So in the latter case we do not try to recover the GC LEB by garbage-collecting to the GC head, but we just try to find an empty LEB, and there may be no empty LEBs, so we just fail. On the other hand, in the former case (mount R/W), we are able to make a GC LEB (@c->gc_lnum) by garbage-collecting. Thus, let's remove this small nice optimization and always allocate write-buffers. This should not make too big difference - we have only 3 of them, each of max. write unit size, which is usually 2KiB. So this is about 6KiB of RAM for the typical case, and only when mounted R/O. [1]: Note, currently the replay process is setting (seeking) the journal heads to _some_ buds, not necessarily to the buds which had been the journal heads before the power cut happened. This will be fixed separately. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
2011-04-21UBIFS: fix master node recoveryArtem Bityutskiy
This patch fixes the following symptoms: 1. Unmount UBIFS cleanly. 2. Start mounting UBIFS R/W and have a power cut immediately 3. Start mounting UBIFS R/O, this succeeds 4. Try to re-mount UBIFS R/W - this fails immediately or later on, because UBIFS will write the master node to the flash area which has been written before. The analysis of the problem: 1. UBIFS is unmounted cleanly, both copies of the master node are clean. 2. UBIFS is being mounter R/W, starts changing master node copy 1, and a power cut happens. The copy N1 becomes corrupted. 3. UBIFS is being mounted R/O. It notices the copy N1 is corrupted and reads copy N2. Copy N2 is clean. 4. Because of R/O mode, UBIFS cannot recover copy 1. 5. The mount code (ubifs_mount()) sees that the master node is clean, so it decides that no recovery is needed. 6. We are re-mounting R/W. UBIFS believes no recovery is needed and starts updating the master node, but copy N1 is still corrupted and was not recovered! Fix this problem by marking the master node as dirty every time we recover it and we are in R/O mode. This forces further recovery and the UBIFS cleans-up the corruptions and recovers the copy N1 when re-mounting R/W later. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
2011-04-21UBIFS: fix false assertion warning in case of I/O failuresArtem Bityutskiy
When UBIFS switches to R/O mode because it detects I/O failures, then when we unmount, we still may have allocated budget, and the assertions which verify that we have not budget will fire. But it is expected to have the budget in case of I/O failures, so the assertion warnings will be false. Suppress them for the I/O failure case. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-20UBIFS: fix false space checking failureArtem Bityutskiy
This patch fixes UBIFS mount failure when the debugging support is enabled, we are recovering from a power cut, we were first mounter R/O and we are re-mounting R/W. In this case we should not assume that the amount of free space before we have re-mounted R/W and after are equivalent, because when we have mounted R/O the file-system is in a non-committed state so the amount of free space is slightly smaller, due to the fact that we cannot predict the amount of free space precisely before we commit. This patch fixes the issue by skipping the debugging check in case of recovery. This issue was reported by Caizhiyong <caizhiyong@huawei.com> here: http://thread.gmane.org/gmane.linux.drivers.mtd/34350/focus=34387 Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reported-by: Caizhiyong <caizhiyong@huawei.com> Cc: stable@kernel.org [2.6.30+]
2011-04-13UBIFS: fix compilation warnings when compiling with gcc 4.5Maksim Rayskiy
When compiling UBIFS with CONFIG_UBIFS_FS_DEBUG not set, gcc-4.5.2 generates a slew of "warning: statement with no effect" on references to non-void functions defined as 0. To avoid these warnings, replace #defines with dummy inline functions. Artem: massage the patch a bit, also remove the duplicate 'dbg_check_lprops()' prototype. Signed-off-by: Maksim Rayskiy <maksim.rayskiy@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-13UBIFS: fix oops when R/O file-system is fsync'edArtem Bityutskiy
This patch fixes severe UBIFS bug: UBIFS oopses when we 'fsync()' an file on R/O-mounter file-system. We (the UBIFS authors) incorrectly thought that VFS would not propagate 'fsync()' down to the file-system if it is read-only, but this is not the case. It is easy to exploit this bug using the following simple perl script: use strict; use File::Sync qw(fsync sync); die "File path is not specified" if not defined $ARGV[0]; my $path = $ARGV[0]; open FILE, "<", "$path" or die "Cannot open $path: $!"; fsync(\*FILE) or die "cannot fsync $path: $!"; close FILE or die "Cannot close $path: $!"; Thanks to Reuben Dowle <Reuben.Dowle@navico.com> for reporting about this issue. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reported-by: Reuben Dowle <Reuben.Dowle@navico.com> Cc: stable@kernel.org
2011-04-07Merge branch 'for-linus' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'for-linus' of git://git.infradead.org/ubifs-2.6: UBI: do not select KALLSYMS_ALL UBI: do not compare array with NULL UBI: check if we are in RO mode in the erase routine UBIFS: fix debugging failure in dbg_check_space_info UBIFS: fix error path in dbg_debugfs_init_fs UBIFS: unify error path dbg_debugfs_init_fs UBIFS: do not select KALLSYMS_ALL UBIFS: fix assertion warnings UBIFS: fix oops on error path in read_pnode UBIFS: do not read flash unnecessarily
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-05fs: export empty_aopsJens Axboe
With the ->sync_page() hook gone, we have a few users that add their own static address_space_operations without any functions defined. fs/inode.c already has an empty_aops that it uses for init purposes. Lets export that and use it in the places where an otherwise empty aops was defined. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05UBIFS: fix debugging failure in dbg_check_space_infoArtem Bityutskiy
This patch fixes a debugging failure with which looks like this: UBIFS error (pid 32313): dbg_check_space_info: free space changed from 6019344 to 6022654 The reason for this failure is described in the comment this patch adds to the code. But in short - 'c->freeable_cnt' may be different before and after re-mounting, and this is normal. So the debugging code should make sure that free space calculations do not depend on 'c->freeable_cnt'. A similar issue has been reported here: http://lists.infradead.org/pipermail/linux-mtd/2011-April/034647.html This patch should fix it. For the -stable guys: this patch is only relevant for kernels 2.6.30 onwards. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org [2.6.30+]
2011-04-05UBIFS: fix error path in dbg_debugfs_init_fsArtem Bityutskiy
The debug interface is substandard and on error returns either NULL or an error code packed in the pointer. So using "IS_ERR" for the pointers returned by debugfs function is incorrect. Instead, we should use IS_ERR_OR_NULL. This path is an improved vestion of the original patch from Phil Carmody. Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2011-04-05UBIFS: unify error path dbg_debugfs_init_fsArtem Bityutskiy
This is just a small clean-up patch which simlifies and unifies the error path in the dbg_debugfs_init_fs(). We have common error path for all failure cases in this function except of the very first case. And this patch makes the first failure case use the same error path as the other cases by using the 'fname' and 'dent' variables. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2011-04-05UBIFS: do not select KALLSYMS_ALLArtem Bityutskiy
All UBIFS needs is to make sure we stacktraces when UBIFS debugging is enabled. It is enough to select KALLSYMS for this, KALLSYMS_ALL is not necessary. Moreover, Randy Dunlap reported that UBIFS causes the following Kconfig dependency warning: warning: (UBIFS_FS_DEBUG && LOCKDEP && LATENCYTOP) selects KALLSYMS_ALL which has unmet direct dependencies (DEBUG_KERNEL && KALLSYMS) The reason is that KALLSYMS_ALL requires DEBUG_KERNEL and KALLSYMS, so ideally, to select KALLSYMS_ALL we'd need to select DEBUG_KERNEL and KALLSYMS first. This seems to be too much to select. The easiest way to go is to forget about KALLSYMS_ALL and just select KALLSYMS when UBIFS debugging is enabled - that should be enough for stackdumps. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-04-05UBIFS: fix assertion warningsArtem Bityutskiy
This patch fixes UBIFS assertion warnings like: UBIFS assert failed in ubifs_leb_unmap at 135 (pid 29365) Pid: 29365, comm: integck Tainted: G I 2.6.37-ubi-2.6+ #34 Call Trace: [<ffffffffa047c663>] ubifs_lpt_init+0x95e/0x9ee [ubifs] [<ffffffffa04623a7>] ubifs_remount_fs+0x2c7/0x762 [ubifs] [<ffffffff810f066e>] do_remount_sb+0xb6/0x101 [<ffffffff81106ff4>] ? do_mount+0x191/0x78e [<ffffffff811070bb>] do_mount+0x258/0x78e [<ffffffff810da1e8>] ? alloc_pages_current+0xa2/0xc5 [<ffffffff81107674>] sys_mount+0x83/0xbd [<ffffffff81009a12>] system_call_fastpath+0x16/0x1b They happen when we re-mount from R/O mode to R/W mode. While re-mounting, we write to the media, but we still have the c->ro_mount flag set. The fix is very simple - just clear the flag before starting re-mounting R/W. These warnings are caused by the following commit: 2ef13294d29bcfb306e0d360f1b97f37b647b0c0 For -stable guys: this bug was introduced in 2.6.38, this is materieal for 2.6.38-stable. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org [2.6.38]
2011-04-05UBIFS: fix oops on error path in read_pnodeArtem Bityutskiy
Thanks to coverity which spotted that UBIFS will oops if 'kmalloc()' in 'read_pnode()' fails and we dereference a NULL 'pnode' pointer when we 'goto out'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
2011-04-05UBIFS: do not read flash unnecessarilyArtem Bityutskiy
This fix makes the 'dbg_check_old_index()' function return immediately if debugging is disabled, instead of executing incorrect 'goto out' which causes UBIFS to: 1. Allocate memory 2. Read the flash On every commit. OK, we do not commit that often, but it is still silly to do unneeded I/O anyway. Credits to coverity for spotting this silly issue. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-24Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits) Documentation/iostats.txt: bit-size reference etc. cfq-iosched: removing unnecessary think time checking cfq-iosched: Don't clear queue stats when preempt. blk-throttle: Reset group slice when limits are changed blk-cgroup: Only give unaccounted_time under debug cfq-iosched: Don't set active queue in preempt block: fix non-atomic access to genhd inflight structures block: attempt to merge with existing requests on plug flush block: NULL dereference on error path in __blkdev_get() cfq-iosched: Don't update group weights when on service tree fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away block: Require subsystems to explicitly allocate bio_set integrity mempool jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging fs: make fsync_buffers_list() plug mm: make generic_writepages() use plugging blk-cgroup: Add unaccounted time to timeslice_used. block: fixup plugging stubs for !CONFIG_BLOCK block: remove obsolete comments for blkdev_issue_zeroout. blktrace: Use rq->cmd_flags directly in blk_add_trace_rq. ... Fix up conflicts in fs/{aio.c,super.c}
2011-03-24Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'for-linus' of git://git.infradead.org/ubi-2.6: UBIFS: fix assertion warning and refine comments UBIFS: kill CONFIG_UBIFS_FS_DEBUG_CHKS UBIFS: use GFP_NOFS properly UBI: use GFP_NOFS properly
2011-03-24UBIFS: fix assertion warning and refine commentsArtem Bityutskiy
This patch fixes the following UBIFS assertion warning: UBIFS assert failed in do_readpage at 115 (pid 199) [<b00321b8>] (unwind_backtrace+0x0/0xdc) from [<af025118>] (do_readpage+0x108/0x594 [ubifs]) [<af025118>] (do_readpage+0x108/0x594 [ubifs]) from [<af025764>] (ubifs_write_end+0x1c0/0x2e8 [ubifs]) [<af025764>] (ubifs_write_end+0x1c0/0x2e8 [ubifs]) from [<b00a0164>] (generic_file_buffered_write+0x18c/0x270) [<b00a0164>] (generic_file_buffered_write+0x18c/0x270) from [<b00a08d4>] (__generic_file_aio_write+0x478/0x4c0) [<b00a08d4>] (__generic_file_aio_write+0x478/0x4c0) from [<b00a0984>] (generic_file_aio_write+0x68/0xc8) [<b00a0984>] (generic_file_aio_write+0x68/0xc8) from [<af024a78>] (ubifs_aio_write+0x178/0x1d8 [ubifs]) [<af024a78>] (ubifs_aio_write+0x178/0x1d8 [ubifs]) from [<b00d104c>] (do_sync_write+0xb0/0x100) [<b00d104c>] (do_sync_write+0xb0/0x100) from [<b00d1abc>] (vfs_write+0xac/0x154) [<b00d1abc>] (vfs_write+0xac/0x154) from [<b00d1c10>] (sys_write+0x3c/0x68) [<b00d1c10>] (sys_write+0x3c/0x68) from [<b002d9a0>] (ret_fast_syscall+0x0/0x2c) The 'PG_checked' flag is used to indicate that the page does not supposedly exist on the media (e.g., a hole or a page beyond the inode size), so it requires slightly bigger budget, because we have to account the indexing size increase. And this flag basically tells that the budget for this page has to be "new page budget". The "new page budget" is slightly bigger than the "existing page budget". The 'do_readpage()' function has the following assertion which sometimes is hit: 'ubifs_assert(!PageChecked(page))'. Obviously, the meaning of this assertion is: "I should not be asked to read a page which does not exist on the media". However, in 'ubifs_write_begin()' we have a small "trick". Notice, that VFS may write pages which were not read yet, so the page data were not loaded from the media to the page cache yet. If VFS tells that it is going to change only some part of the page, we obviously have to load it from the media. However, if VFS tells that it is going to change whole page, we do not read it from the media for optimization purposes. However, since we do not read it, we do not know if it exists on the media or not (a hole, etc). So we set the 'PG_checked' flag to this page to force bigger budget, just in case. So 'ubifs_write_begin()' sets 'PG_checked'. Then we are in 'ubifs_write_end()'. And VFS tells us: "hey, for some reasons I changed my mind and did not change whole page". Frankly, I do not know why this happens, but I hit this somehow on an ARM platform. And this is extremely rare. So in this case UBIFS does the following: 1. Cancels allocated budget. 2. Loads the page from the media by calling 'do_readpage()'. 3. Asks VFS to repeat the whole write operation from the very beginning (call '->write_begin() again, etc). And the assertion warning is hit at the step 2 - remember we have the 'PG_checked' set for this page, and 'do_readpage()' does not like this. So this patch fixes the problem by adding step 1.5 and cleaning the 'PG_checked' before calling 'do_readpage()'. All in all, this patch does not fix any functionality issue, but it silences UBIFS false positive warning which may happen in very very rare cases. And while on it, this patch also improves a commentary which explains the reasons of setting the 'PG_checked' flag for the page. The old commentary was a bit difficult to understand. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-24UBIFS: kill CONFIG_UBIFS_FS_DEBUG_CHKSArtem Bityutskiy
Simplify UBIFS configuration menu and kill the option to enable self-check compile-time. We do not really need this because we can do this run-time using the module parameters or the corresponding sysfs interfaces. And there is a value in simplifying the kernel configuration menu which becomes increasingly large. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-24UBIFS: use GFP_NOFS properlyArtem Bityutskiy
This patch fixes a brown-paperbag bug which was introduced by me: I used incorrect "GFP_KERNEL | GFP_NOFS" allocation flags to make sure my allocations do not cause write-back. But the correct form is "GFP_NOFS". Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-23userns: rename is_owner_or_cap to inode_owner_or_capableSerge E. Hallyn
And give it a kernel-doc comment. [akpm@linux-foundation.org: btrfs changed in linux-next] Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-18Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (25 commits) UBIFS: clean-up commentaries UBIFS: save 128KiB or more RAM UBIFS: allocate orphans scan buffer on demand UBIFS: allocate lpt dump buffer on demand UBIFS: allocate ltab checking buffer on demand UBIFS: allocate scanning buffer on demand UBIFS: allocate dump buffer on demand UBIFS: do not check data crc by default UBIFS: simplify UBIFS Kconfig menu UBIFS: print max. index node size UBIFS: handle allocation failures in UBIFS write path UBIFS: use max_write_size during recovery UBIFS: use max_write_size for write-buffers UBIFS: introduce write-buffer size field UBI: incorporate LEB offset information UBIFS: incorporate maximum write size UBI: provide LEB offset information UBI: incorporate maximum write size UBIFS: fix LEB number in printk UBIFS: restrict world-writable debugfs files ...
2011-03-16UBIFS: clean-up commentariesArtem Bityutskiy
Clean-up commentaries in debug.h and remove references to non-existing symblols. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: save 128KiB or more RAMArtem Bityutskiy
When debugging is enabled, we allocate a buffer of PEB size for various debugging purposes. However, now all users of this buffer are gone and we can safely remove it and save 128KiB or more RAM. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate orphans scan buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'dbg_scan_orphans()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate lpt dump buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'dump_lpt_leb()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate ltab checking buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'dbg_check_ltab_lnum()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate scanning buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'scan_check_cb()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16UBIFS: allocate dump buffer on demandArtem Bityutskiy
Instead of using pre-allocated 'c->dbg->buf' buffer in 'dbg_dump_leb()', dynamically allocate it when needed. The intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and save 128KiB of RAM (or more if PEB size is larger). Indeed, currently we allocate this memory even if the user never enables any self-check, which is wasteful. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-15fs: Remove i_nlink check from file system link callbackAneesh Kumar K.V
Now that VFS check for inode->i_nlink == 0 and returns proper error, remove similar check from file system Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-11UBIFS: do not check data crc by defaultArtem Bityutskiy
Change the default UBIFS behavior WRT data CRC checking. Currently, UBIFS checks data CRC when reading, which slows it down quite a bit, and this is the default option. However, it looks like in average user does not need this feature and would prefer faster read speed over extra reliability. And this seems to be de-facto standard that file-systems do not check data CRC every time they read from the media. Thus, make UBIFS default behavior so that it does not check data CRC. This corresponds to the no_chk_data_crc mount option. Those users who need extra protection can always enable it using the chk_data_crc option. Please, read more information about this feature here: http://www.linux-mtd.infradead.org/doc/ubifs.html#L_checksumming Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-11UBIFS: simplify UBIFS Kconfig menuArtem Bityutskiy
Remove debug message level and debug checks Kconfig options as they proved to be useless anyway. We have sysfs interface which we can use for fine-grained debugging messages and checks selection, see Documentation/filesystems/ubifs.txt for mode details. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-11UBIFS: print max. index node sizeArtem Bityutskiy
Improve debugging messages by printing the maximum index node size on mount. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-11UBIFS: handle allocation failures in UBIFS write pathMatthew L. Creech
Running kernel 2.6.37, my PPC-based device occasionally gets an order-2 allocation failure in UBIFS, which causes the root FS to become unwritable: kswapd0: page allocation failure. order:2, mode:0x4050 Call Trace: [c787dc30] [c00085b8] show_stack+0x7c/0x194 (unreliable) [c787dc70] [c0061aec] __alloc_pages_nodemask+0x4f0/0x57c [c787dd00] [c0061b98] __get_free_pages+0x20/0x50 [c787dd10] [c00e4f88] ubifs_jnl_write_data+0x54/0x200 [c787dd50] [c00e82d4] do_writepage+0x94/0x198 [c787dd90] [c00675e4] shrink_page_list+0x40c/0x77c [c787de40] [c0067de0] shrink_inactive_list+0x1e0/0x370 [c787de90] [c0068224] shrink_zone+0x2b4/0x2b8 [c787df00] [c0068854] kswapd+0x408/0x5d4 [c787dfb0] [c0037bcc] kthread+0x80/0x84 [c787dff0] [c000ef44] kernel_thread+0x4c/0x68 Similar problems were encountered last April by Tomasz Stanislawski: http://patchwork.ozlabs.org/patch/50965/ This patch implements Artem's suggested fix: fall back to a mutex-protected static buffer, allocated at mount time. I tested it by forcing execution down the failure path, and didn't see any ill effects. Artem: massaged the patch a little, improved it so that we'd not allocate the write reserve buffer when we are in R/O mode. Signed-off-by: Matthew L. Creech <mlcreech@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-10block: remove per-queue pluggingJens Axboe
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-08UBIFS: use max_write_size during recoveryArtem Bityutskiy
When recovering from unclean reboots UBIFS scans the journal and checks nodes. If a corrupted node is found, UBIFS tries to check if this is the last node in the LEB or not. This is is done by checking if there only 0xFF bytes starting from the next min. I/O unit. However, since now we write in c->max_write_size, we should actually check for 0xFFs starting from the next max. write unit. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-08UBIFS: use max_write_size for write-buffersArtem Bityutskiy
Switch write-buffers from 'c->min_io_size' to 'c->max_write_size' which presumably has to be more write speed-efficient. However, when write-buffer is synchronized, write only the the min. I/O units which contain the data, do not write whole write-buffer. This is more space-efficient. Additionally, this patch takes into account that the LEB might not start from the max. write unit-aligned address. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-08UBIFS: introduce write-buffer size fieldArtem Bityutskiy
Currently we assume write-buffer size is always min_io_size. But this is about to change and write-buffers may be of variable size. Namely, they will be of max_write_size at the beginning, but will get smaller when we are approaching the end of LEB. This is a preparation patch which introduces 'size' field in the write-buffer structure which carries the current write-buffer size. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-08UBI: incorporate LEB offset informationArtem Bityutskiy
Incorporate the LEB offset information into UBIFS. We'll use this information in one of the next patches to figure out what are the max. write size offsets relative to the PEB. So this patch is just a preparation. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-08UBIFS: incorporate maximum write sizeArtem Bityutskiy
Incorporate maximum write size into the UBIFS description data structure. This patch just introduces new 'c->max_write_size' and 'c->max_write_shift' fields as a preparation for the following patches. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-02-08UBIFS: fix LEB number in printkArtem Bityutskiy
This is a minor patch which fixes the LEB number we print when corrupted empty space is found. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-02-06UBIFS: restrict world-writable debugfs filesVasiliy Kulikov
Don't allow everybody to dump sensitive information about filesystems. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-02-06UBIFS: describe UBIFS recovery logic some moreArtem Bityutskiy
This patch adds more commentaries about UBIFS recovery logic which should explain the famous UBIFS "corrupt empty space" errors. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-02-06UBIFS: remove double semicolonArtem Bityutskiy
Just a tiny clean-up - remove ;; Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-01-25UBIFS: do not start the commit if there is nothing to commitArtem Bityutskiy
This patch fixes suboptimal UBIFS 'sync_fs()' implementation which causes flash I/O even if the file-system is synchronized. E.g., a 'printk()' in the MTD erasure function (e.g., 'nand_erase_nand()') can show that for every 'sync' shell command UBIFS erases at least one eraseblock. So '$ while true; do sync; done' will cause huge amount of flash I/O. The reason for this is that UBIFS commits in 'sync_fs()', and starts the commit even if there is nothing to commit, e.g., it anyway changes the log. This patch adds a check in the 'do_commit()' UBIFS functions which prevents the commit if there is nothing to commit. Reported-by: Hans J. Koch <hjk@linutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-01-17UBIFS: introduce mounting flagArtem Bityutskiy
This is a preparational patch which removes the 'c->always_chk_crc' which was set during mounting and remounting to R/W mode and introduces 'c->mounting' flag which is set when mounting. Now the 'c->always_chk_crc' flag is the same as 'c->remounting_rw && c->mounting'. This patch is a preparation for the next one which will need to know when we are mounting and remounting to R/W mode, which is exactly what 'c->always_chk_crc' effectively is, but its name does not suite the next patch. The other possibility would be to just re-name it, but then we'd end up with less logical flags coverage. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-01-17UBIFS: re-arrange variables in ubifs_infoArtem Bityutskiy
This is a cosmetic patch which re-arranges variables in 'struct ubifs_info' so that all boolean-like variables which are only changed during mounting or re-mounting to R/W mode are places together. Then they are turned into bit-fields, which makes the structure a little bit smaller. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>