// Copyright (C) 2019 The Android Open Source Project // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. package apex import ( "fmt" "strconv" "strings" "android/soong/android" "android/soong/java" "github.com/google/blueprint" "github.com/google/blueprint/proptools" ) var ( extractMatchingApex = pctx.StaticRule( "extractMatchingApex", blueprint.RuleParams{ Command: `rm -rf "$out" && ` + `${extract_apks} -o "${out}" -allow-prereleased=${allow-prereleased} ` + `-sdk-version=${sdk-version} -abis=${abis} -screen-densities=all -extract-single ` + `${in}`, CommandDeps: []string{"${extract_apks}"}, }, "abis", "allow-prereleased", "sdk-version") ) type prebuilt interface { isForceDisabled() bool InstallFilename() string } type prebuiltCommon struct { prebuilt android.Prebuilt properties prebuiltCommonProperties } type sanitizedPrebuilt interface { hasSanitizedSource(sanitizer string) bool } type prebuiltCommonProperties struct { ForceDisable bool `blueprint:"mutated"` } func (p *prebuiltCommon) Prebuilt() *android.Prebuilt { return &p.prebuilt } func (p *prebuiltCommon) isForceDisabled() bool { return p.properties.ForceDisable } func (p *prebuiltCommon) checkForceDisable(ctx android.ModuleContext) bool { // If the device is configured to use flattened APEX, force disable the prebuilt because // the prebuilt is a non-flattened one. forceDisable := ctx.Config().FlattenApex() // Force disable the prebuilts when we are doing unbundled build. We do unbundled build // to build the prebuilts themselves. forceDisable = forceDisable || ctx.Config().UnbundledBuild() // Force disable the prebuilts when coverage is enabled. forceDisable = forceDisable || ctx.DeviceConfig().NativeCoverageEnabled() forceDisable = forceDisable || ctx.Config().IsEnvTrue("EMMA_INSTRUMENT") // b/137216042 don't use prebuilts when address sanitizer is on, unless the prebuilt has a sanitized source sanitized := ctx.Module().(sanitizedPrebuilt) forceDisable = forceDisable || (android.InList("address", ctx.Config().SanitizeDevice()) && !sanitized.hasSanitizedSource("address")) forceDisable = forceDisable || (android.InList("hwaddress", ctx.Config().SanitizeDevice()) && !sanitized.hasSanitizedSource("hwaddress")) if forceDisable && p.prebuilt.SourceExists() { p.properties.ForceDisable = true return true } return false } type Prebuilt struct { android.ModuleBase prebuiltCommon properties PrebuiltProperties inputApex android.Path installDir android.InstallPath installFilename string outputApex android.WritablePath // list of commands to create symlinks for backward compatibility. // these commands will be attached as LOCAL_POST_INSTALL_CMD compatSymlinks []string } type ApexFileProperties struct { // the path to the prebuilt .apex file to import. // // This cannot be marked as `android:"arch_variant"` because the `prebuilt_apex` is only mutated // for android_common. That is so that it will have the same arch variant as, and so be compatible // with, the source `apex` module type that it replaces. Src *string Arch struct { Arm struct { Src *string } Arm64 struct { Src *string } X86 struct { Src *string } X86_64 struct { Src *string } } } // prebuiltApexSelector selects the correct prebuilt APEX file for the build target. // // The ctx parameter can be for any module not just the prebuilt module so care must be taken not // to use methods on it that are specific to the current module. // // See the ApexFileProperties.Src property. func (p *ApexFileProperties) prebuiltApexSelector(ctx android.BaseModuleContext, prebuilt android.Module) []string { multiTargets := prebuilt.MultiTargets() if len(multiTargets) != 1 { ctx.OtherModuleErrorf(prebuilt, "compile_multilib shouldn't be \"both\" for prebuilt_apex") return nil } var src string switch multiTargets[0].Arch.ArchType { case android.Arm: src = String(p.Arch.Arm.Src) case android.Arm64: src = String(p.Arch.Arm64.Src) case android.X86: src = String(p.Arch.X86.Src) case android.X86_64: src = String(p.Arch.X86_64.Src) default: ctx.OtherModuleErrorf(prebuilt, "prebuilt_apex does not support %q", multiTargets[0].Arch.String()) return nil } if src == "" { src = String(p.Src) } return []string{src} } type PrebuiltProperties struct { ApexFileProperties DeapexerProperties Installable *bool // Optional name for the installed apex. If unspecified, name of the // module is used as the file name Filename *string // Names of modules to be overridden. Listed modules can only be other binaries // (in Make or Soong). // This does not completely prevent installation of the overridden binaries, but if both // binaries would be installed by default (in PRODUCT_PACKAGES) the other binary will be removed // from PRODUCT_PACKAGES. Overrides []string } func (a *Prebuilt) hasSanitizedSource(sanitizer string) bool { return false } func (p *Prebuilt) installable() bool { return p.properties.Installable == nil || proptools.Bool(p.properties.Installable) } func (p *Prebuilt) OutputFiles(tag string) (android.Paths, error) { switch tag { case "": return android.Paths{p.outputApex}, nil default: return nil, fmt.Errorf("unsupported module reference tag %q", tag) } } func (p *Prebuilt) InstallFilename() string { return proptools.StringDefault(p.properties.Filename, p.BaseModuleName()+imageApexSuffix) } func (p *Prebuilt) Name() string { return p.prebuiltCommon.prebuilt.Name(p.ModuleBase.Name()) } // prebuilt_apex imports an `.apex` file into the build graph as if it was built with apex. // // If this needs to make files from within a `.apex` file available for use by other Soong modules, // e.g. make dex implementation jars available for java_import modules isted in exported_java_libs, // it does so as follows: // // 1. It creates a `deapexer` module that actually extracts the files from the `.apex` file and // makes them available for use by other modules, at both Soong and ninja levels. // // 2. It adds a dependency onto those modules and creates an apex specific variant similar to what // an `apex` module does. That ensures that code which looks for specific apex variant, e.g. // dexpreopt, will work the same way from source and prebuilt. // // 3. The `deapexer` module adds a dependency from the modules that require the exported files onto // itself so that they can retrieve the file paths to those files. // func PrebuiltFactory() android.Module { module := &Prebuilt{} module.AddProperties(&module.properties) android.InitPrebuiltModuleWithSrcSupplier(module, module.properties.prebuiltApexSelector, "src") android.InitAndroidMultiTargetsArchModule(module, android.DeviceSupported, android.MultilibCommon) android.AddLoadHook(module, func(ctx android.LoadHookContext) { props := struct { Name *string }{ Name: proptools.StringPtr(module.BaseModuleName() + ".deapexer"), } ctx.CreateModule(privateDeapexerFactory, &props, &module.properties.ApexFileProperties, &module.properties.DeapexerProperties, ) }) return module } func prebuiltApexExportedModuleName(ctx android.BottomUpMutatorContext, name string) string { // The prebuilt_apex should be depending on prebuilt modules but as this runs after // prebuilt_rename the prebuilt module may or may not be using the prebuilt_ prefixed named. So, // check to see if the prefixed name is in use first, if it is then use that, otherwise assume // the unprefixed name is the one to use. If the unprefixed one turns out to be a source module // and not a renamed prebuilt module then that will be detected and reported as an error when // processing the dependency in ApexInfoMutator(). prebuiltName := "prebuilt_" + name if ctx.OtherModuleExists(prebuiltName) { name = prebuiltName } return name } type exportedDependencyTag struct { blueprint.BaseDependencyTag name string } // Mark this tag so dependencies that use it are excluded from visibility enforcement. // // This does allow any prebuilt_apex to reference any module which does open up a small window for // restricted visibility modules to be referenced from the wrong prebuilt_apex. However, doing so // avoids opening up a much bigger window by widening the visibility of modules that need files // provided by the prebuilt_apex to include all the possible locations they may be defined, which // could include everything below vendor/. // // A prebuilt_apex that references a module via this tag will have to contain the appropriate files // corresponding to that module, otherwise it will fail when attempting to retrieve the files from // the .apex file. It will also have to be included in the module's apex_available property too. // That makes it highly unlikely that a prebuilt_apex would reference a restricted module // incorrectly. func (t exportedDependencyTag) ExcludeFromVisibilityEnforcement() {} var ( exportedJavaLibTag = exportedDependencyTag{name: "exported_java_lib"} ) func (p *Prebuilt) DepsMutator(ctx android.BottomUpMutatorContext) { // Add dependencies onto the java modules that represent the java libraries that are provided by // and exported from this prebuilt apex. for _, lib := range p.properties.Exported_java_libs { dep := prebuiltApexExportedModuleName(ctx, lib) ctx.AddFarVariationDependencies(ctx.Config().AndroidCommonTarget.Variations(), exportedJavaLibTag, dep) } } var _ ApexInfoMutator = (*Prebuilt)(nil) // ApexInfoMutator marks any modules for which this apex exports a file as requiring an apex // specific variant and checks that they are supported. // // The apexMutator will ensure that the ApexInfo objects passed to BuildForApex(ApexInfo) are // associated with the apex specific variant using the ApexInfoProvider for later retrieval. // // Unlike the source apex module type the prebuilt_apex module type cannot share compatible variants // across prebuilt_apex modules. That is because there is no way to determine whether two // prebuilt_apex modules that export files for the same module are compatible. e.g. they could have // been built from different source at different times or they could have been built with different // build options that affect the libraries. // // While it may be possible to provide sufficient information to determine whether two prebuilt_apex // modules were compatible it would be a lot of work and would not provide much benefit for a couple // of reasons: // * The number of prebuilt_apex modules that will be exporting files for the same module will be // low as the prebuilt_apex only exports files for the direct dependencies that require it and // very few modules are direct dependencies of multiple prebuilt_apex modules, e.g. there are a // few com.android.art* apex files that contain the same contents and could export files for the // same modules but only one of them needs to do so. Contrast that with source apex modules which // need apex specific variants for every module that contributes code to the apex, whether direct // or indirect. // * The build cost of a prebuilt_apex variant is generally low as at worst it will involve some // extra copying of files. Contrast that with source apex modules that has to build each variant // from source. func (p *Prebuilt) ApexInfoMutator(mctx android.TopDownMutatorContext) { // Collect direct dependencies into contents. contents := make(map[string]android.ApexMembership) // Collect the list of dependencies. var dependencies []android.ApexModule mctx.VisitDirectDeps(func(m android.Module) { tag := mctx.OtherModuleDependencyTag(m) if tag == exportedJavaLibTag { depName := mctx.OtherModuleName(m) // It is an error if the other module is not a prebuilt. if _, ok := m.(android.PrebuiltInterface); !ok { mctx.PropertyErrorf("exported_java_libs", "%q is not a prebuilt module", depName) return } // It is an error if the other module is not an ApexModule. if _, ok := m.(android.ApexModule); !ok { mctx.PropertyErrorf("exported_java_libs", "%q is not usable within an apex", depName) return } // Strip off the prebuilt_ prefix if present before storing content to ensure consistent // behavior whether there is a corresponding source module present or not. depName = android.RemoveOptionalPrebuiltPrefix(depName) // Remember that this module was added as a direct dependency. contents[depName] = contents[depName].Add(true) // Add the module to the list of dependencies that need to have an APEX variant. dependencies = append(dependencies, m.(android.ApexModule)) } }) // Create contents for the prebuilt_apex and store it away for later use. apexContents := android.NewApexContents(contents) mctx.SetProvider(ApexBundleInfoProvider, ApexBundleInfo{ Contents: apexContents, }) // Create an ApexInfo for the prebuilt_apex. apexInfo := android.ApexInfo{ ApexVariationName: mctx.ModuleName(), InApexes: []string{mctx.ModuleName()}, ApexContents: []*android.ApexContents{apexContents}, ForPrebuiltApex: true, } // Mark the dependencies of this module as requiring a variant for this module. for _, am := range dependencies { am.BuildForApex(apexInfo) } } func (p *Prebuilt) GenerateAndroidBuildActions(ctx android.ModuleContext) { // TODO(jungjw): Check the key validity. p.inputApex = p.Prebuilt().SingleSourcePath(ctx) p.installDir = android.PathForModuleInstall(ctx, "apex") p.installFilename = p.InstallFilename() if !strings.HasSuffix(p.installFilename, imageApexSuffix) { ctx.ModuleErrorf("filename should end in %s for prebuilt_apex", imageApexSuffix) } p.outputApex = android.PathForModuleOut(ctx, p.installFilename) ctx.Build(pctx, android.BuildParams{ Rule: android.Cp, Input: p.inputApex, Output: p.outputApex, }) if p.prebuiltCommon.checkForceDisable(ctx) { p.HideFromMake() return } if p.installable() { ctx.InstallFile(p.installDir, p.installFilename, p.inputApex) } // in case that prebuilt_apex replaces source apex (using prefer: prop) p.compatSymlinks = makeCompatSymlinks(p.BaseModuleName(), ctx) // or that prebuilt_apex overrides other apexes (using overrides: prop) for _, overridden := range p.properties.Overrides { p.compatSymlinks = append(p.compatSymlinks, makeCompatSymlinks(overridden, ctx)...) } } func (p *Prebuilt) AndroidMkEntries() []android.AndroidMkEntries { return []android.AndroidMkEntries{android.AndroidMkEntries{ Class: "ETC", OutputFile: android.OptionalPathForPath(p.inputApex), Include: "$(BUILD_PREBUILT)", ExtraEntries: []android.AndroidMkExtraEntriesFunc{ func(ctx android.AndroidMkExtraEntriesContext, entries *android.AndroidMkEntries) { entries.SetString("LOCAL_MODULE_PATH", p.installDir.ToMakePath().String()) entries.SetString("LOCAL_MODULE_STEM", p.installFilename) entries.SetBoolIfTrue("LOCAL_UNINSTALLABLE_MODULE", !p.installable()) entries.AddStrings("LOCAL_OVERRIDES_MODULES", p.properties.Overrides...) if len(p.compatSymlinks) > 0 { entries.SetString("LOCAL_POST_INSTALL_CMD", strings.Join(p.compatSymlinks, " && ")) } }, }, }} } type ApexSet struct { android.ModuleBase prebuiltCommon properties ApexSetProperties installDir android.InstallPath installFilename string outputApex android.WritablePath // list of commands to create symlinks for backward compatibility. // these commands will be attached as LOCAL_POST_INSTALL_CMD compatSymlinks []string hostRequired []string postInstallCommands []string } type ApexSetProperties struct { // the .apks file path that contains prebuilt apex files to be extracted. Set *string Sanitized struct { None struct { Set *string } Address struct { Set *string } Hwaddress struct { Set *string } } // whether the extracted apex file installable. Installable *bool // optional name for the installed apex. If unspecified, name of the // module is used as the file name Filename *string // names of modules to be overridden. Listed modules can only be other binaries // (in Make or Soong). // This does not completely prevent installation of the overridden binaries, but if both // binaries would be installed by default (in PRODUCT_PACKAGES) the other binary will be removed // from PRODUCT_PACKAGES. Overrides []string // apexes in this set use prerelease SDK version Prerelease *bool } func (a *ApexSet) prebuiltSrcs(ctx android.BaseModuleContext) []string { var srcs []string if a.properties.Set != nil { srcs = append(srcs, *a.properties.Set) } var sanitizers []string if ctx.Host() { sanitizers = ctx.Config().SanitizeHost() } else { sanitizers = ctx.Config().SanitizeDevice() } if android.InList("address", sanitizers) && a.properties.Sanitized.Address.Set != nil { srcs = append(srcs, *a.properties.Sanitized.Address.Set) } else if android.InList("hwaddress", sanitizers) && a.properties.Sanitized.Hwaddress.Set != nil { srcs = append(srcs, *a.properties.Sanitized.Hwaddress.Set) } else if a.properties.Sanitized.None.Set != nil { srcs = append(srcs, *a.properties.Sanitized.None.Set) } return srcs } func (a *ApexSet) hasSanitizedSource(sanitizer string) bool { if sanitizer == "address" { return a.properties.Sanitized.Address.Set != nil } if sanitizer == "hwaddress" { return a.properties.Sanitized.Hwaddress.Set != nil } return false } func (a *ApexSet) installable() bool { return a.properties.Installable == nil || proptools.Bool(a.properties.Installable) } func (a *ApexSet) InstallFilename() string { return proptools.StringDefault(a.properties.Filename, a.BaseModuleName()+imageApexSuffix) } func (a *ApexSet) Name() string { return a.prebuiltCommon.prebuilt.Name(a.ModuleBase.Name()) } func (a *ApexSet) Overrides() []string { return a.properties.Overrides } // prebuilt_apex imports an `.apex` file into the build graph as if it was built with apex. func apexSetFactory() android.Module { module := &ApexSet{} module.AddProperties(&module.properties) srcsSupplier := func(ctx android.BaseModuleContext, _ android.Module) []string { return module.prebuiltSrcs(ctx) } android.InitPrebuiltModuleWithSrcSupplier(module, srcsSupplier, "set") android.InitAndroidMultiTargetsArchModule(module, android.DeviceSupported, android.MultilibCommon) return module } func (a *ApexSet) GenerateAndroidBuildActions(ctx android.ModuleContext) { a.installFilename = a.InstallFilename() if !strings.HasSuffix(a.installFilename, imageApexSuffix) { ctx.ModuleErrorf("filename should end in %s for apex_set", imageApexSuffix) } apexSet := a.prebuiltCommon.prebuilt.SingleSourcePath(ctx) a.outputApex = android.PathForModuleOut(ctx, a.installFilename) ctx.Build(pctx, android.BuildParams{ Rule: extractMatchingApex, Description: "Extract an apex from an apex set", Inputs: android.Paths{apexSet}, Output: a.outputApex, Args: map[string]string{ "abis": strings.Join(java.SupportedAbis(ctx), ","), "allow-prereleased": strconv.FormatBool(proptools.Bool(a.properties.Prerelease)), "sdk-version": ctx.Config().PlatformSdkVersion().String(), }, }) if a.prebuiltCommon.checkForceDisable(ctx) { a.HideFromMake() return } a.installDir = android.PathForModuleInstall(ctx, "apex") if a.installable() { ctx.InstallFile(a.installDir, a.installFilename, a.outputApex) } // in case that apex_set replaces source apex (using prefer: prop) a.compatSymlinks = makeCompatSymlinks(a.BaseModuleName(), ctx) // or that apex_set overrides other apexes (using overrides: prop) for _, overridden := range a.properties.Overrides { a.compatSymlinks = append(a.compatSymlinks, makeCompatSymlinks(overridden, ctx)...) } if ctx.Config().InstallExtraFlattenedApexes() { // flattened apex should be in /system_ext/apex flattenedApexDir := android.PathForModuleInstall(&systemExtContext{ctx}, "apex", a.BaseModuleName()) a.postInstallCommands = append(a.postInstallCommands, fmt.Sprintf("$(HOST_OUT_EXECUTABLES)/deapexer --debugfs_path $(HOST_OUT_EXECUTABLES)/debugfs extract %s %s", a.outputApex.String(), flattenedApexDir.ToMakePath().String(), )) a.hostRequired = []string{"deapexer", "debugfs"} } } type systemExtContext struct { android.ModuleContext } func (*systemExtContext) SystemExtSpecific() bool { return true } func (a *ApexSet) AndroidMkEntries() []android.AndroidMkEntries { return []android.AndroidMkEntries{android.AndroidMkEntries{ Class: "ETC", OutputFile: android.OptionalPathForPath(a.outputApex), Include: "$(BUILD_PREBUILT)", Host_required: a.hostRequired, ExtraEntries: []android.AndroidMkExtraEntriesFunc{ func(ctx android.AndroidMkExtraEntriesContext, entries *android.AndroidMkEntries) { entries.SetString("LOCAL_MODULE_PATH", a.installDir.ToMakePath().String()) entries.SetString("LOCAL_MODULE_STEM", a.installFilename) entries.SetBoolIfTrue("LOCAL_UNINSTALLABLE_MODULE", !a.installable()) entries.AddStrings("LOCAL_OVERRIDES_MODULES", a.properties.Overrides...) postInstallCommands := append([]string{}, a.postInstallCommands...) postInstallCommands = append(postInstallCommands, a.compatSymlinks...) if len(postInstallCommands) > 0 { entries.SetString("LOCAL_POST_INSTALL_CMD", strings.Join(postInstallCommands, " && ")) } }, }, }} }