diff options
Diffstat (limited to '.ci/android_headers/cutils/trace.h')
-rw-r--r-- | .ci/android_headers/cutils/trace.h | 247 |
1 files changed, 0 insertions, 247 deletions
diff --git a/.ci/android_headers/cutils/trace.h b/.ci/android_headers/cutils/trace.h deleted file mode 100644 index 54265a7..0000000 --- a/.ci/android_headers/cutils/trace.h +++ /dev/null @@ -1,247 +0,0 @@ -// clang-format off -/* - * Copyright (C) 2012 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBS_CUTILS_TRACE_H -#define _LIBS_CUTILS_TRACE_H - -#include <inttypes.h> -#include <stdatomic.h> -#include <stdbool.h> -#include <stdint.h> -#include <stdio.h> -#include <sys/cdefs.h> -#include <sys/types.h> -#include <unistd.h> -#include <cutils/compiler.h> - -__BEGIN_DECLS - -/** - * The ATRACE_TAG macro can be defined before including this header to trace - * using one of the tags defined below. It must be defined to one of the - * following ATRACE_TAG_* macros. The trace tag is used to filter tracing in - * userland to avoid some of the runtime cost of tracing when it is not desired. - * - * Defining ATRACE_TAG to be ATRACE_TAG_ALWAYS will result in the tracing always - * being enabled - this should ONLY be done for debug code, as userland tracing - * has a performance cost even when the trace is not being recorded. Defining - * ATRACE_TAG to be ATRACE_TAG_NEVER or leaving ATRACE_TAG undefined will result - * in the tracing always being disabled. - * - * ATRACE_TAG_HAL should be bitwise ORed with the relevant tags for tracing - * within a hardware module. For example a camera hardware module would set: - * #define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL) - * - * Keep these in sync with frameworks/base/core/java/android/os/Trace.java. - */ -#define ATRACE_TAG_NEVER 0 // This tag is never enabled. -#define ATRACE_TAG_ALWAYS (1<<0) // This tag is always enabled. -#define ATRACE_TAG_GRAPHICS (1<<1) -#define ATRACE_TAG_INPUT (1<<2) -#define ATRACE_TAG_VIEW (1<<3) -#define ATRACE_TAG_WEBVIEW (1<<4) -#define ATRACE_TAG_WINDOW_MANAGER (1<<5) -#define ATRACE_TAG_ACTIVITY_MANAGER (1<<6) -#define ATRACE_TAG_SYNC_MANAGER (1<<7) -#define ATRACE_TAG_AUDIO (1<<8) -#define ATRACE_TAG_VIDEO (1<<9) -#define ATRACE_TAG_CAMERA (1<<10) -#define ATRACE_TAG_HAL (1<<11) -#define ATRACE_TAG_APP (1<<12) -#define ATRACE_TAG_RESOURCES (1<<13) -#define ATRACE_TAG_DALVIK (1<<14) -#define ATRACE_TAG_RS (1<<15) -#define ATRACE_TAG_BIONIC (1<<16) -#define ATRACE_TAG_POWER (1<<17) -#define ATRACE_TAG_PACKAGE_MANAGER (1<<18) -#define ATRACE_TAG_SYSTEM_SERVER (1<<19) -#define ATRACE_TAG_DATABASE (1<<20) -#define ATRACE_TAG_NETWORK (1<<21) -#define ATRACE_TAG_ADB (1<<22) -#define ATRACE_TAG_VIBRATOR (1<<23) -#define ATRACE_TAG_AIDL (1<<24) -#define ATRACE_TAG_NNAPI (1<<25) -#define ATRACE_TAG_RRO (1<<26) -#define ATRACE_TAG_LAST ATRACE_TAG_RRO - -// Reserved for initialization. -#define ATRACE_TAG_NOT_READY (1ULL<<63) - -#define ATRACE_TAG_VALID_MASK ((ATRACE_TAG_LAST - 1) | ATRACE_TAG_LAST) - -#ifndef ATRACE_TAG -#define ATRACE_TAG ATRACE_TAG_NEVER -#elif ATRACE_TAG > ATRACE_TAG_VALID_MASK -#error ATRACE_TAG must be defined to be one of the tags defined in cutils/trace.h -#endif - -/** - * Opens the trace file for writing and reads the property for initial tags. - * The atrace.tags.enableflags property sets the tags to trace. - * This function should not be explicitly called, the first call to any normal - * trace function will cause it to be run safely. - */ -void atrace_setup(); - -/** - * If tracing is ready, set atrace_enabled_tags to the system property - * debug.atrace.tags.enableflags. Can be used as a sysprop change callback. - */ -void atrace_update_tags(); - -/** - * Set whether the process is debuggable. By default the process is not - * considered debuggable. If the process is not debuggable then application- - * level tracing is not allowed unless the ro.debuggable system property is - * set to '1'. - */ -void atrace_set_debuggable(bool debuggable); - -/** - * Set whether tracing is enabled for the current process. This is used to - * prevent tracing within the Zygote process. - */ -void atrace_set_tracing_enabled(bool enabled); - -/** - * This is always set to false. This forces code that uses an old version - * of this header to always call into atrace_setup, in which we call - * atrace_init unconditionally. - */ -extern atomic_bool atrace_is_ready; - -/** - * Set of ATRACE_TAG flags to trace for, initialized to ATRACE_TAG_NOT_READY. - * A value of zero indicates setup has failed. - * Any other nonzero value indicates setup has succeeded, and tracing is on. - */ -extern uint64_t atrace_enabled_tags; - -/** - * Handle to the kernel's trace buffer, initialized to -1. - * Any other value indicates setup has succeeded, and is a valid fd for tracing. - */ -extern int atrace_marker_fd; - -/** - * atrace_init readies the process for tracing by opening the trace_marker file. - * Calling any trace function causes this to be run, so calling it is optional. - * This can be explicitly run to avoid setup delay on first trace function. - */ -#define ATRACE_INIT() atrace_init() -#define ATRACE_GET_ENABLED_TAGS() atrace_get_enabled_tags() - -void atrace_init(); -uint64_t atrace_get_enabled_tags(); - -/** - * Test if a given tag is currently enabled. - * Returns nonzero if the tag is enabled, otherwise zero. - * It can be used as a guard condition around more expensive trace calculations. - */ -#define ATRACE_ENABLED() atrace_is_tag_enabled(ATRACE_TAG) -static inline uint64_t atrace_is_tag_enabled(uint64_t tag) -{ - return atrace_get_enabled_tags() & tag; -} - -/** - * Trace the beginning of a context. name is used to identify the context. - * This is often used to time function execution. - */ -#define ATRACE_BEGIN(name) atrace_begin(ATRACE_TAG, name) -static inline void atrace_begin(uint64_t tag, const char* name) -{ - if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { - void atrace_begin_body(const char*); - atrace_begin_body(name); - } -} - -/** - * Trace the end of a context. - * This should match up (and occur after) a corresponding ATRACE_BEGIN. - */ -#define ATRACE_END() atrace_end(ATRACE_TAG) -static inline void atrace_end(uint64_t tag) -{ - if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { - void atrace_end_body(); - atrace_end_body(); - } -} - -/** - * Trace the beginning of an asynchronous event. Unlike ATRACE_BEGIN/ATRACE_END - * contexts, asynchronous events do not need to be nested. The name describes - * the event, and the cookie provides a unique identifier for distinguishing - * simultaneous events. The name and cookie used to begin an event must be - * used to end it. - */ -#define ATRACE_ASYNC_BEGIN(name, cookie) \ - atrace_async_begin(ATRACE_TAG, name, cookie) -static inline void atrace_async_begin(uint64_t tag, const char* name, - int32_t cookie) -{ - if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { - void atrace_async_begin_body(const char*, int32_t); - atrace_async_begin_body(name, cookie); - } -} - -/** - * Trace the end of an asynchronous event. - * This should have a corresponding ATRACE_ASYNC_BEGIN. - */ -#define ATRACE_ASYNC_END(name, cookie) atrace_async_end(ATRACE_TAG, name, cookie) -static inline void atrace_async_end(uint64_t tag, const char* name, int32_t cookie) -{ - if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { - void atrace_async_end_body(const char*, int32_t); - atrace_async_end_body(name, cookie); - } -} - -/** - * Traces an integer counter value. name is used to identify the counter. - * This can be used to track how a value changes over time. - */ -#define ATRACE_INT(name, value) atrace_int(ATRACE_TAG, name, value) -static inline void atrace_int(uint64_t tag, const char* name, int32_t value) -{ - if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { - void atrace_int_body(const char*, int32_t); - atrace_int_body(name, value); - } -} - -/** - * Traces a 64-bit integer counter value. name is used to identify the - * counter. This can be used to track how a value changes over time. - */ -#define ATRACE_INT64(name, value) atrace_int64(ATRACE_TAG, name, value) -static inline void atrace_int64(uint64_t tag, const char* name, int64_t value) -{ - if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { - void atrace_int64_body(const char*, int64_t); - atrace_int64_body(name, value); - } -} - -__END_DECLS - -#endif // _LIBS_CUTILS_TRACE_H |