diff options
| author | Joel Stanley <joel@jms.id.au> | 2020-06-22 12:40:04 +0930 |
|---|---|---|
| committer | David Gibson <david@gibson.dropbear.id.au> | 2020-06-22 17:52:50 +1000 |
| commit | fdabcf2980a467bb255ea6661eba7273cfa7d708 (patch) | |
| tree | 0ed1401149328982b5c702847d14dc344116b017 | |
| parent | 2478b1652c8d39ce7921cda83eaba9c86cadbd36 (diff) | |
| download | dtc-fdabcf2980a467bb255ea6661eba7273cfa7d708.tar.gz | |
checks: Remove warning for I2C_OWN_SLAVE_ADDRESS
dtc does a sanity check on reg properties that they are within the 10
bit address range for i2c slave addresses. In the case of multi-master
buses or devices that act as a slave, the binding may describe an
address that the bus will listen on as a device. Do not warn when this
flag is set.
See Documentation/devicetree/bindings/i2c/i2c.txt.
This fixes the following build warnings reported by Stephen and by Arnd:
arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:126.11-130.4:
Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@80/ipmb1@10:
I2C bus unit address format error, expected "40000010"
arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:128.3-30:
Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@80/ipmb1@10:reg:
I2C address must be less than 10-bits, got "0x40000010"
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200622031005.1890039-2-joel@jms.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
| -rw-r--r-- | checks.c | 6 |
1 files changed, 6 insertions, 0 deletions
@@ -1022,6 +1022,8 @@ static void check_i2c_bus_bridge(struct check *c, struct dt_info *dti, struct no } WARNING(i2c_bus_bridge, check_i2c_bus_bridge, NULL, &addr_size_cells); +#define I2C_OWN_SLAVE_ADDRESS (1U << 30) + static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node *node) { struct property *prop; @@ -1044,6 +1046,8 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node } reg = fdt32_to_cpu(*cells); + /* Ignore I2C_OWN_SLAVE_ADDRESS */ + reg &= ~I2C_OWN_SLAVE_ADDRESS; snprintf(unit_addr, sizeof(unit_addr), "%x", reg); if (!streq(unitname, unit_addr)) FAIL(c, dti, node, "I2C bus unit address format error, expected \"%s\"", @@ -1051,6 +1055,8 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node for (len = prop->val.len; len > 0; len -= 4) { reg = fdt32_to_cpu(*(cells++)); + /* Ignore I2C_OWN_SLAVE_ADDRESS */ + reg &= ~I2C_OWN_SLAVE_ADDRESS; if (reg > 0x3ff) FAIL_PROP(c, dti, node, prop, "I2C address must be less than 10-bits, got \"0x%x\"", reg); |