diff options
author | Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com> | 2023-11-24 11:36:44 +0100 |
---|---|---|
committer | Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com> | 2024-04-12 12:40:01 +0200 |
commit | 1f4c9051cd1726ae2cea20cacb1ddb8cbc3e7d55 (patch) | |
tree | 624f2cedfd244b5090e5c46ebf7894f0ab83d022 | |
parent | 1ad29c818be8ba78bfffee2ff32d2c602034e940 (diff) | |
download | mbedtls-1f4c9051cd1726ae2cea20cacb1ddb8cbc3e7d55.tar.gz |
all.s: Rm redundant build-only accel components
Most of them (2 exceptions, see below) are of the "driver + built-in"
type, so they're all a subset of test_psa_crypto_driver which tests
everything with driver + built-in at once.
Furthermore, all those components were build-only, while
test_psa_crypto_driver runs the test suites.
Special cases: two of the components looked like they were trying to go for
driver-only (ecdh disabling ECDH_C and hkdf disabling HKDF_C).
For ECDH, built-in would actually be re-enabled because not enough was
accelerated: you also need ECC key types and curves - see
component_test_psa_crypto_config_accel_ecdh which does this correctly.
For HKDF, we don't have test driver support for key derivation yet. I
guess that shows how little testing value these build-only components
really had.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
-rwxr-xr-x | tests/scripts/all.sh | 248 |
1 files changed, 0 insertions, 248 deletions
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh index 104adb135..a49d1c65f 100755 --- a/tests/scripts/all.sh +++ b/tests/scripts/all.sh @@ -4158,254 +4158,6 @@ component_test_ccm_aes_sha256() { make test } -# This should be renamed to test and updated once the accelerator ECDH code is in place and ready to test. -component_build_psa_accel_alg_ecdh() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py unset MBEDTLS_ECDH_C - scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED - scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED - scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED - scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED - scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDH -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test. -component_build_psa_accel_alg_hmac() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HMAC" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HMAC -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator HKDF code is in place and ready to test. -component_build_psa_accel_alg_hkdf() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_HKDF_C - # Make sure to unset TLS1_3 since it requires HKDF_C and will not build properly without it. - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HKDF -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator MD5 code is in place and ready to test. -component_build_psa_accel_alg_md5() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_MD5 - other hashes" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS - scripts/config.py unset MBEDTLS_LMS_C - scripts/config.py unset MBEDTLS_LMS_PRIVATE - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD5 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator RIPEMD160 code is in place and ready to test. -component_build_psa_accel_alg_ripemd160() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RIPEMD160 - other hashes" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS - scripts/config.py unset MBEDTLS_LMS_C - scripts/config.py unset MBEDTLS_LMS_PRIVATE - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator SHA1 code is in place and ready to test. -component_build_psa_accel_alg_sha1() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_1 - other hashes" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS - scripts/config.py unset MBEDTLS_LMS_C - scripts/config.py unset MBEDTLS_LMS_PRIVATE - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_1 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator SHA224 code is in place and ready to test. -component_build_psa_accel_alg_sha224() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_224 - other hashes" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_224 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator SHA256 code is in place and ready to test. -component_build_psa_accel_alg_sha256() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_256 - other hashes" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_256 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator SHA384 code is in place and ready to test. -component_build_psa_accel_alg_sha384() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_384 - other hashes" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS - scripts/config.py unset MBEDTLS_LMS_C - scripts/config.py unset MBEDTLS_LMS_PRIVATE - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_384 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator SHA512 code is in place and ready to test. -component_build_psa_accel_alg_sha512() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_512 - other hashes" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS - scripts/config.py unset MBEDTLS_LMS_C - scripts/config.py unset MBEDTLS_LMS_PRIVATE - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_512 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. -component_build_psa_accel_alg_rsa_pkcs1v15_crypt() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_CRYPT -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. -component_build_psa_accel_alg_rsa_pkcs1v15_sign() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. -component_build_psa_accel_alg_rsa_oaep() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_OAEP 1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_OAEP -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. -component_build_psa_accel_alg_rsa_pss() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1 - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN - scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. -component_build_psa_accel_key_type_rsa_key_pair() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_xxx + PSA_WANT_ALG_RSA_PSS" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC 1 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT 1 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT 1 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE 1 - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - -# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. -component_build_psa_accel_key_type_rsa_public_key() { - msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS" - scripts/config.py full - scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO - scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1 - scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY 1 - # Need to define the correct symbol and include the test driver header path in order to build with the test driver - make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_PUBLIC_KEY -I../tests/include" LDFLAGS="$ASAN_CFLAGS" -} - - support_build_tfm_armcc () { support_build_armcc } |