diff options
Diffstat (limited to 'library/psa_crypto_hash.h')
| -rw-r--r-- | library/psa_crypto_hash.h | 225 |
1 files changed, 225 insertions, 0 deletions
diff --git a/library/psa_crypto_hash.h b/library/psa_crypto_hash.h new file mode 100644 index 000000000..053da0bf5 --- /dev/null +++ b/library/psa_crypto_hash.h @@ -0,0 +1,225 @@ +/* + * PSA hashing layer on top of Mbed TLS software crypto + */ +/* + * Copyright The Mbed TLS Contributors + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef PSA_CRYPTO_HASH_H +#define PSA_CRYPTO_HASH_H + +#include <psa/crypto.h> + +#include "md_wrap.h" + +/** Calculate the hash (digest) of a message using Mbed TLS routines. + * + * \note The signature of this function is that of a PSA driver hash_compute + * entry point. This function behaves as a hash_compute entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_HASH(\p alg) is true). + * \param[in] input Buffer containing the message to hash. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] hash Buffer where the hash is to be written. + * \param hash_size Size of the \p hash buffer in bytes. + * \param[out] hash_length On success, the number of bytes + * that make up the hash value. This is always + * #PSA_HASH_LENGTH(\p alg). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p hash_size is too small + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_hash_compute( + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *hash, + size_t hash_size, + size_t *hash_length); + +/** Set up a multipart hash operation using Mbed TLS routines. + * + * \note The signature of this function is that of a PSA driver hash_setup + * entry point. This function behaves as a hash_setup entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * If an error occurs at any step after a call to mbedtls_psa_hash_setup(), the + * operation will need to be reset by a call to mbedtls_psa_hash_abort(). The + * core may call mbedtls_psa_hash_abort() at any time after the operation + * has been initialized. + * + * After a successful call to mbedtls_psa_hash_setup(), the core must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to mbedtls_psa_hash_finish() or mbedtls_psa_hash_verify(). + * - A call to mbedtls_psa_hash_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized to all-zero and not yet be in use. + * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_HASH(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_hash_setup( + mbedtls_psa_hash_operation_t *operation, + psa_algorithm_t alg ); + +/** Clone an Mbed TLS hash operation. + * + * \note The signature of this function is that of a PSA driver hash_clone + * entry point. This function behaves as a hash_clone entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * This function copies the state of an ongoing hash operation to + * a new operation object. In other words, this function is equivalent + * to calling mbedtls_psa_hash_setup() on \p target_operation with the same + * algorithm that \p source_operation was set up for, then + * mbedtls_psa_hash_update() on \p target_operation with the same input that + * that was passed to \p source_operation. After this function returns, the + * two objects are independent, i.e. subsequent calls involving one of + * the objects do not affect the other object. + * + * \param[in] source_operation The active hash operation to clone. + * \param[in,out] target_operation The operation object to set up. + * It must be initialized but not active. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_BAD_STATE + * The \p source_operation state is not valid (it must be active). + * \retval #PSA_ERROR_BAD_STATE + * The \p target_operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + */ +psa_status_t mbedtls_psa_hash_clone( + const mbedtls_psa_hash_operation_t *source_operation, + mbedtls_psa_hash_operation_t *target_operation ); + +/** Add a message fragment to a multipart Mbed TLS hash operation. + * + * \note The signature of this function is that of a PSA driver hash_update + * entry point. This function behaves as a hash_update entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * The application must call mbedtls_psa_hash_setup() before calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling mbedtls_psa_hash_abort(). + * + * \param[in,out] operation Active hash operation. + * \param[in] input Buffer containing the message fragment to hash. + * \param input_length Size of the \p input buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_hash_update( + mbedtls_psa_hash_operation_t *operation, + const uint8_t *input, + size_t input_length ); + +/** Finish the calculation of the Mbed TLS-calculated hash of a message. + * + * \note The signature of this function is that of a PSA driver hash_finish + * entry point. This function behaves as a hash_finish entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * The application must call mbedtls_psa_hash_setup() before calling this function. + * This function calculates the hash of the message formed by concatenating + * the inputs passed to preceding calls to mbedtls_psa_hash_update(). + * + * When this function returns successfully, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling mbedtls_psa_hash_abort(). + * + * \param[in,out] operation Active hash operation. + * \param[out] hash Buffer where the hash is to be written. + * \param hash_size Size of the \p hash buffer in bytes. + * \param[out] hash_length On success, the number of bytes + * that make up the hash value. This is always + * #PSA_HASH_LENGTH(\c alg) where \c alg is the + * hash algorithm that is calculated. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p hash buffer is too small. You can determine a + * sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg) + * where \c alg is the hash algorithm that is calculated. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_hash_finish( + mbedtls_psa_hash_operation_t *operation, + uint8_t *hash, + size_t hash_size, + size_t *hash_length ); + +/** Abort an Mbed TLS hash operation. + * + * \note The signature of this function is that of a PSA driver hash_abort + * entry point. This function behaves as a hash_abort entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * mbedtls_psa_hash_setup() again. + * + * You may call this function any time after the operation object has + * been initialized by one of the methods described in #psa_hash_operation_t. + * + * In particular, calling mbedtls_psa_hash_abort() after the operation has been + * terminated by a call to mbedtls_psa_hash_abort(), mbedtls_psa_hash_finish() or + * mbedtls_psa_hash_verify() is safe and has no effect. + * + * \param[in,out] operation Initialized hash operation. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_hash_abort( + mbedtls_psa_hash_operation_t *operation ); + +#endif /* PSA_CRYPTO_HASH_H */ |