diff options
Diffstat (limited to 'library/psa_crypto_mac.h')
| -rw-r--r-- | library/psa_crypto_mac.h | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/library/psa_crypto_mac.h b/library/psa_crypto_mac.h new file mode 100644 index 000000000..a821e7411 --- /dev/null +++ b/library/psa_crypto_mac.h @@ -0,0 +1,276 @@ +/* + * PSA MAC layer on top of Mbed TLS software crypto + */ +/* + * Copyright The Mbed TLS Contributors + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef PSA_CRYPTO_MAC_H +#define PSA_CRYPTO_MAC_H + +#include <psa/crypto.h> + +/** Calculate the MAC (message authentication code) of a message using Mbed TLS. + * + * \note The signature of this function is that of a PSA driver mac_compute + * entry point. This function behaves as a mac_compute entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * \param[in] attributes The attributes of the key to use for the + * operation. + * \param[in] key_buffer The buffer containing the key to use for + * computing the MAC. This buffer contains the key + * in export representation as defined by + * psa_export_key() (i.e. the raw key bytes). + * \param key_buffer_size Size of the \p key_buffer buffer in bytes. + * \param alg The MAC algorithm to use (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * \param[in] input Buffer containing the input message. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] mac Buffer where the MAC value is to be written. + * \param mac_size Size of the \p mac buffer in bytes. + * \param[out] mac_length On success, the number of bytes + * that make up the MAC value. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p mac_size is too small + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_mac_compute( + const psa_key_attributes_t *attributes, + const uint8_t *key_buffer, + size_t key_buffer_size, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *mac, + size_t mac_size, + size_t *mac_length); + +/** Set up a multipart MAC calculation operation using Mbed TLS. + * + * \note The signature of this function is that of a PSA driver mac_sign_setup + * entry point. This function behaves as a mac_sign_setup entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized and not yet in use. + * \param[in] attributes The attributes of the key to use for the + * operation. + * \param[in] key_buffer The buffer containing the key to use for + * computing the MAC. This buffer contains the key + * in export representation as defined by + * psa_export_key() (i.e. the raw key bytes). + * \param key_buffer_size Size of the \p key_buffer buffer in bytes. + * \param alg The MAC algorithm to use (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + */ +psa_status_t mbedtls_psa_mac_sign_setup( + mbedtls_psa_mac_operation_t *operation, + const psa_key_attributes_t *attributes, + const uint8_t *key_buffer, + size_t key_buffer_size, + psa_algorithm_t alg); + +/** Set up a multipart MAC verification operation using Mbed TLS. + * + * \note The signature of this function is that of a PSA driver mac_verify_setup + * entry point. This function behaves as a mac_verify_setup entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized and not yet in use. + * \param[in] attributes The attributes of the key to use for the + * operation. + * \param[in] key_buffer The buffer containing the key to use for + * computing the MAC. This buffer contains the key + * in export representation as defined by + * psa_export_key() (i.e. the raw key bytes). + * \param key_buffer_size Size of the \p key_buffer buffer in bytes. + * \param alg The MAC algorithm to use (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + */ +psa_status_t mbedtls_psa_mac_verify_setup( + mbedtls_psa_mac_operation_t *operation, + const psa_key_attributes_t *attributes, + const uint8_t *key_buffer, + size_t key_buffer_size, + psa_algorithm_t alg); + +/** Add a message fragment to a multipart MAC operation using Mbed TLS. + * + * \note The signature of this function is that of a PSA driver mac_update + * entry point. This function behaves as a mac_update entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * The PSA core calls mbedtls_psa_mac_sign_setup() or + * mbedtls_psa_mac_verify_setup() before calling this function. + * + * If this function returns an error status, the PSA core aborts the + * operation by calling mbedtls_psa_mac_abort(). + * + * \param[in,out] operation Active MAC operation. + * \param[in] input Buffer containing the message fragment to add to + * the MAC calculation. + * \param input_length Size of the \p input buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_mac_update( + mbedtls_psa_mac_operation_t *operation, + const uint8_t *input, + size_t input_length ); + +/** Finish the calculation of the MAC of a message using Mbed TLS. + * + * \note The signature of this function is that of a PSA driver mac_sign_finish + * entry point. This function behaves as a mac_sign_finish entry point as + * defined in the PSA driver interface specification for transparent + * drivers. + * + * The PSA core calls mbedtls_psa_mac_sign_setup() before calling this function. + * This function calculates the MAC of the message formed by concatenating + * the inputs passed to preceding calls to mbedtls_psa_mac_update(). + * + * Whether this function returns successfully or not, the PSA core subsequently + * aborts the operation by calling mbedtls_psa_mac_abort(). + * + * \param[in,out] operation Active MAC operation. + * \param[out] mac Buffer where the MAC value is to be written. + * \param mac_size Output size requested for the MAC algorithm. The PSA + * core guarantees this is a valid MAC length for the + * algorithm and key combination passed to + * mbedtls_psa_mac_sign_setup(). It also guarantees the + * \p mac buffer is large enough to contain the + * requested output size. + * \param[out] mac_length On success, the number of bytes output to buffer + * \p mac, which will be equal to the requested length + * \p mac_size. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active mac sign + * operation). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p mac buffer is too small. A sufficient buffer size + * can be determined by calling PSA_MAC_LENGTH(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_mac_sign_finish( + mbedtls_psa_mac_operation_t *operation, + uint8_t *mac, + size_t mac_size, + size_t *mac_length ); + +/** Finish the calculation of the MAC of a message and compare it with + * an expected value using Mbed TLS. + * + * \note The signature of this function is that of a PSA driver + * mac_verify_finish entry point. This function behaves as a + * mac_verify_finish entry point as defined in the PSA driver interface + * specification for transparent drivers. + * + * The PSA core calls mbedtls_psa_mac_verify_setup() before calling this + * function. This function calculates the MAC of the message formed by + * concatenating the inputs passed to preceding calls to + * mbedtls_psa_mac_update(). It then compares the calculated MAC with the + * expected MAC passed as a parameter to this function. + * + * Whether this function returns successfully or not, the PSA core subsequently + * aborts the operation by calling mbedtls_psa_mac_abort(). + * + * \param[in,out] operation Active MAC operation. + * \param[in] mac Buffer containing the expected MAC value. + * \param mac_length Length in bytes of the expected MAC value. The PSA + * core guarantees that this length is a valid MAC + * length for the algorithm and key combination passed + * to mbedtls_psa_mac_verify_setup(). + * + * \retval #PSA_SUCCESS + * The expected MAC is identical to the actual MAC of the message. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The MAC of the message was calculated successfully, but it + * differs from the expected MAC. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active mac verify + * operation). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_mac_verify_finish( + mbedtls_psa_mac_operation_t *operation, + const uint8_t *mac, + size_t mac_length ); + +/** Abort a MAC operation using Mbed TLS. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * mbedtls_psa_mac_sign_setup() or mbedtls_psa_mac_verify_setup() again. + * + * The PSA core may call this function any time after the operation object has + * been initialized by one of the methods described in + * #mbedtls_psa_mac_operation_t. + * + * In particular, calling mbedtls_psa_mac_abort() after the operation has been + * terminated by a call to mbedtls_psa_mac_abort(), + * mbedtls_psa_mac_sign_finish() or mbedtls_psa_mac_verify_finish() is safe and + * has no effect. + * + * \param[in,out] operation Initialized MAC operation. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_CORRUPTION_DETECTED + */ +psa_status_t mbedtls_psa_mac_abort( + mbedtls_psa_mac_operation_t *operation ); + +#endif /* PSA_CRYPTO_MAC_H */ |