diff options
Diffstat (limited to 'netperf-2.4.4/Release_Notes')
-rw-r--r-- | netperf-2.4.4/Release_Notes | 762 |
1 files changed, 0 insertions, 762 deletions
diff --git a/netperf-2.4.4/Release_Notes b/netperf-2.4.4/Release_Notes deleted file mode 100644 index b78ebd2..0000000 --- a/netperf-2.4.4/Release_Notes +++ /dev/null @@ -1,762 +0,0 @@ -These are the Release Notes leading-up to Revision 2.4.4 of netperf: - -Things changed in this release: - -*) The LOC_CPU and REM_CPU tests will report their respective beliefs - as to the number of CPUs present when the verbosity is set to more - than one. This can be used when trying to diagnose issues with CPU - utilization. - -*) A kind soul who wishes to remain anonymous provided a patch to - enable use of sendfile() on OSX. - -*) Fix a misplaced \n in a format string of send_tcp_maerts, courtesy - of Alexander Duyck. - -*) There is an experimental global -r option which will allow one to - include CPU utilization measurements, but make the decision about - hitting confidence based on the result only. The test banner will - reflects this when -r is used. - -*) It is no longer necessary to specify a file with the global -F - option when running a _SENDFILE test. Netperf will create a - temporary file and populate it with random data and use that. If - running aggregate tests it is strongly suggested one use a -F - option. Otherwise, the overhead spent creating and populating the - temporary file will be included in the CPU utilization calculation. - -*) The configure script recognizes Solaris 11 and selects the correct - CPU utilization mechanism - or rather it selects the same mechanism - as is used in Solaris 10. Fix courtesy of Andrew Gallatin. - -*) Convert a number of struct sockaddr_in's to struct - sockaddr_storage's and add requisite casts to deal with some abort - problems on Windows and perhaps other platforms as well. Kudos to - Alexander Duyck. - -*) One can now pass a value of 'x' to the global -f option to specify - the units as transactions per second. This is the default for any - request/response test, which is determined by there being a "double - `r'" in the name - eg "RR," "rr," "Rr," or "rR." At present only - the TCP_RR test actually looks for this to be set. - -*) One can request bits/bytes per second as the primary output of a - TCP_RR test by setting the global -f option to [kmgKMG] as with any - of the "STREAM" tests. This converts the primary throughput metric - to a bitrate (byterate) following the verbosity rules for a STREAM - test. Service demand remains usec/Transaction regardless of the - setting of the global -f option. - - A verbosity level of 2 or more will cause the TCP_RR test to report - calculated average RTT latency, transaction rate, and inbound and - outbound transfer rates regardless of the primary units selected - with the global -f paramter. If the primary output is transactions - per second, the reported inbound and outbound transfer rates will - be 10^6 bits per second, otherwise, they honor the setting of the - global -f option. - - All of this is EXPERIMENTAL and subject to change without prior - notice in future versions of netperf. - -*) Replace "break" with "break 2" in acinclude.m4 for a socklen macro - -*) The default for the requested socket buffer size is changed from 0 - to -1 to enable passing a value of 0 under Windows, which tells that - stack one wishes to enable copy-avoidance. - -*) Call fflush() on each interim result displayed in demo mode to make - things happier for folks redirecting same to a file. From Dan - Yost. - -*) In theory each distinct netserver child will have a debug log with - its pid appended to the name, somewhat like what appears to happen - under Windows. - -*) A new global, command-line option to netperf and netserver has been - added. The -V option will cause netperf/netserver to display its - version and exit. - -*) Setting -I without setting -i will now implicitly set the iteration - minimum and maximums as if a -i 10,3 were set. Also, some further - sanity checking on the bounds for each is made. - -*) Fixed a typo in the manual (found by Emir Halepovic) so the - description for the -s and -S options properly specifies they - affect the data connection. - -These are the Release Notes for Revision 2.4.3 of netperf: - -Things changed in this release: - -*) The UDP_STREAM test includes --enable-demo support, courtesy of - patches from Scott Weitzenkamp. - -*) The nettest_dns.* files have been removed from the release and the - repository. Those wishing to perform DNS server tests should - migrate to netperf4 which has better support for DNS test. - -*) Fixes for compiling under Windows with Mingw/gcc courtesy of Gisle - Vanem. - -*) A new global option - -N - has been added. When specified, this - option will tell netperf to not bother to try to establish a - control connection with a remote netserver. Instead, netperf will - only attempt to make a data connection to the remote system. By - default, this will be to the "discard" service for a "STREAM" or - "SENDFILE" test, the "echo" service for a "RR" test and the - "chargen" service for a "MAERTS" test. Any "remote" settings are - changed to reflect their being unused in the test, and a "no - control" tag is added to the test banner when -N is specified. - - This still needs to be propagated to other test files - at least - for those for which it may make sense. - -*) The tests in nettest_bsd.c have been altered to not actually take - timestamps and deltas in --enable-histogram unless the verbosity - level has been set to actually display a histogram. This reduces - the overhead measurably, even on systems with "fast" time calls, - which _may_ mean that a future release of netperf may have - histogram support enabled by default. - - This still needs to be propagated to other test files. Patches - from the community would be most welcome :) - -*) Eliminate a bogus fprintf from the signal catching routine which - was being executed when both intervals and demo mode were active at - the same time. - -*) The nettest_ipv6.* files are no longer included in the source - tar/zip file. IPv6 functionality has been subsumed into the - nettest_bsd.* files for some time now. - -*) Use a higher resolution "time" source for HISTOGRAM support under - Windows, courtesy of Spencer Frink. Prior to this it had no better - than 10ms granularity which could lead to some rather strange - looking results :) - -*) A bug fix reporting recv_size rather than send_size in TCP_MAERTS - when CPU utilization was requested. - -*) A bug fix for buffer filling from a file to properly advance the - buffer pointer when the file is smaller than the send buffer. - -*) Enable certain UDP tests which previously used unconnected sockets - to use connected sockets. Courtesy of Shilpi Agarwal. - -*) The OSX CPU utilization code actually gets put into the tarball in - a make dist now :) - -*) The check to make sure that getaddrinfo returned ai_protocol and/or - ai_socktype's matching that which we requested is done for all socket - and/or protocol types and a warning is emitted if it returns any which - do not match. - -*) The linux CPU affinity code has been made capable of binding to - CPU's >=32 on a 32-bit compilation and >=64 on a 64-bit - compilation. - -*) More complete closing/redirecting of stdin/stdout/stderr/where in - netserver to make it easier to launch netserver at the far-end of a - remote shell. Courtesy of Hans Blom. - -*) Sendfile changes for Solaris courtesy of Andrew Gallatin. - -*) "spec" file support to generate RPMs courtesy of Martin Brown - -These are the Release Notes for Revision 2.4.2 of netperf: - -Things changed in this release: - -*) Fixes for floating point format differences, courtesy of George - Davis. - -*) Additions for CPU util support on MacOS X, courtesy of Anonymous. - -*) Processor affinity is now supported on AIX 5.3 (perhaps earlier) - via the bindprocessor system call. - -*) Fixes for test lockups with TCP_CRR and TCP_CC under Windows - courtesy of Dikon Reed. - -*) Fixes to netcpu_looper.c to get it to actually compile :) - -*) Have netcpu_looper use the bind_to_specific_processor() call - provided by netlib since that knows about more platforms than the - code in netcpu_looper did. The looper CPU binding will use a - mapping to handle cases where the CPU id's on the system may not be - a contiguous space starting from zero. At present, the code that - setups the mapping only knows about retrieving actual CPU ids under - HP-UX. - -*) The netcpu_sysctl method becomes calibration-free, courtesy of - Andrew Gallatin - -These are the Release Notes for Revision 2.4.1 of netperf: - -Things changed in this release: - -*) There is now a -B global command-line argument that will append its - parameter as a string to the end of result lines when test banners - have been suppressed. this is to make it easier to distinguish one - result from another when aggregate restults are being run in - parallel, without having to resort to having the individual results - shell redirected to a file. This has been done for some of the - tests in nettest_bsd.c, but not all of them, nor for the tests in - the other nettest_mumble.c files. - -*) There is now an --enable-spin configure option that will enable - intervals if not already enabled and will have the sender sit and - spin in a tight loop until time for the next interval rather than - wait for an interval timer to expire. This means it should be - possible to have a much finer granularity on the interval, at the - expense of an EXTREME increase in CPU utilization. (To the extent - I'm considering disabling measurement of local CPU utilization when - that mode is enabled, and bursts have been requested - your - feedback on that topic would be most appreciated) - - If only --enable-intervals is used with configure, the old set the - interval timer and wait method is still used. - - If --enable-spin is configured, the test banner will include "spin - intervals" rather than the "intervals" from a plain - --enable-intervals. The sit and spin will either use - gettimeofday(), or gethrtime() if gethrtime() is available. - - This has been implemented in the tests of nettest_bsd.c but none of - the others. Volunteers would be most welcome. I would entertain - the notion of making the implementation a series of inline - functions in netlib. This holds true for the demo mode - why will - become clear when you look at nettest_bsd.c. While things are - considerably cleaner than they were before, with reuse within - nettest_bsd.c, there is no resuse with the rest of the - nettest_mumble.c files. - -*) the -w option for the interval time now takes three optional - suffixes. if the suffix is 'm' (eg 10m) it will assume the user has - specified time in units of milliseconds. if the suffix is 'u' it - will assume microseconds, and if 's' seconds. no suffix remains - milliseconds for backwards compatability with previous netperf - versions. - -*) It should be possible to successfully compile with - --enable-intervals. - -These are the Release Notes for Revision 2.4.1 of netperf: - -Things changed in this release: - -*) netcpu_pstatnew.c has been altered to workaround a bug in the - interrupt cycle accounting in HP-UX 11.23 that is not expected to - be resolved until a later release. basically, some interrupt time - is not counted, which means the sum of idle, user, kernel and - interrupt is less than the cycles per second multiplied by the - elapsed time. the workaround preserves the "no calibration - required" nature of the pstatnew CPU utilization mechanism. you - can see more in netcpu_pstatnew.c and/or in debug output. - -*) in netlib.c recv_response has been renamed - recv_response_timed(addl_time) which is now used in - calibrate_remote_cpu in place of the "sleep(40);recv_response()" - sequence. This then allows the REM_CPU test to complete in less - than 40 seconds when the remote's CPU utilization mechanism does - not require calibration. The value of "addl_time" is added to the - tc_sec field of the select() timeout. A "new" recv_response has - been added that simply calls recv_response_timed(0) - this is to - minimize the number of changes needed elsewhere in the code. - -*) hopefully, this release fixes problems people have been having with - the configure script failing when picking a type for socklen_t. - now, instead of generating an error, it emits a warning and simply - tries socklen_t - -*) the configure script no longer looks for the size of an in_port_t - -*) netlib.c now has code to perform processor binding for Tru64, but - the configure script may or may not detect it correctly. This means - that one may have to edit the config.h file by hand to get the - functionality. - -*) it is known that netperf will compile under Windows XP and 2003 - using the DDK it is possible that netperf 2.4.1 will compile on a - Windows system under VC++/Visual Studio. It might even work!-) See - the README.window file for additional details. - -Things _NOT_ changed in this release: - -*) The automagic determination of the number and type of parameters to - sched_setaffinity under Linux remains brittle at best. - -These are the Release Notes for Revision 2.4.0 of netperf: - -Things changed in this release: - -*) Netperf has been converted to use a configure script. Yes boys and - girls, after 12 years of distributing netperf with just a makefile - I have finally bitten the bullet and cast my fate to autoconf, - automake, etc. To get the most basic netperf built all you should - need to do is: - - cd to the netperf directory - ./configure - make - and perhaps - make install - - (Note, I've not done much with make install - I'm hemming and - hawing over what the default installation location should be) - - Please keep in mind that this is the first time I've tried to use - autoconf et al. I am sure there are things that should be done - differently and would welcome any and all constructive criticisms. - - I suspect there are several places where I've not fully - demonstrated being of the autoconf body - particulary as pertains - to include files being in "#if mumble #endif" blocks. Fixes would - be most welcome. - -*) Speaking of becomming one with various GNU tools, work on a new - netperf manual has begun, with the source being a texinfo document - that is converted to "all" the other formats. This resides in doc/ - . - -*) The platform-specific parts of CPU utilization measurement have - been broken-out into separate .c files and selected at configure - time a la the pcap_mumble files of tcpdump. This makes - src/netlib.c _much_ easier to read and the addition of new CPU - utilization mechanisms much easier. - -*) New HP-UX 11.23 and Solaris 10 CPU utilization measurement - mechanisms (called pstatnew and kstat10 respectively) need no - calibration step. Both have variations on microstate accounting. - HP-UX 11.23 still identifies the method in the headers as 'P' for - pstat. The kstat10 method is identified as 'M' for Microstate. - - Scripts which make calibration runs with LOC_CPU and REM_CPU may - continue to do so, they will just run forty to eighty seconds - faster on platforms with the calibration-free CPU util mechanisms. - -*) Automatic detection of CPU utilization mechanism for HP-UX, Linux, - AIX, *BSD and Solaris. If you do not like what the configure - script selects, you can use --enable-cpuutil=<foo> . - -*) The "times" (aka 'T') CPU utilization mechanism has been removed. - It was never very accurate at all, only showing CPU time charged to - the process, and with interrupts and other network processing it is - rarely chaged to a or the correct process. It and other methods - may remain in the format_cpu_method() routine of src/netlib.c for - historical purposes only. - -*) CAVEAT - the "kstat" mechanism is KNOWN TO BE BOGUS for Solaris. - It does not include time spent processing interrupts, and - networking benchmarks will generate at least a few of those... - This affects _ALL_ versions of Solaris with kstat. - - So, do NOT trust any CPU util figures where netperf says the method - was 'K' for kstat - unless perhaps it reports 100% CPU util. - - Solaris 10 takes a step in the right direction adding microstate - accounting similar to what netperf uses on HP-UX 11.23. HOWEVER, - Solaris 10's accounting for user/kernel/idle is done in _parallel_ - with interrupt, which means they overlap. Doubleplusungood. Netperf - attempts to compensate for that with some handwaving - (src/netcpu_kstat10.c) - -*) Initial support for SCTP has been added with the SCTP_STREAM and - SCTP_RR tests. These tests use the libsctp mechanisms for - increased portability. It has been explained that libsctp should - not impart all that much overhead and it does make things rather - simpler. - -*) Netperf now uses getaddrinfo() to resolve hostnames and IP - addresses. A replacement getaddrinfo() is provided for those - platforms where the configure script cannot tell that getaddrinfo - is present. - - There are cases where a host's getaddrinfo call may return results - that ignore the hints for protocol. Netperf catches these and - reports a warning so you can pester your OS source for fixes. - - Solaris getaddrinfo() seems to return results with SCTP procotol - cleared. - - Mac OS X getaddrinfo botches when the service/port is specified as - "0" so one must specify a port number on the netperf command line. - - AIX 5.something getaddrinfo has a different but similar problem - with "0" as a port/service name as well. - - Linux 2.6 and HP-UX 11i getaddrinfo seem to be fine - at least as - far as netperf goes :) - -*) A "Demo Mode" has been added to the main BSD Sockets/TCP/UDP tests: - TCP_STREAM, TCP_MAERTS, TCP_SENDFILE, TCP_RR, TCP_CC, TCP_CRR and - UDP_RR. It has not been added to UDP_STREAM. This mode is enabled - with --enable-demo when configuring netperf, which activates a - global "-D" option. By default, -D will cause interim results - (throughput or transactions/s only, not CPU util) from the - netperf's perspective to be emitted no sooner than once per second. - An optional parameter can specify another interval in units - (floating point) of seconds: - - -D 1.5 - - will make the reporting interval at least 1.5 seconds. - - This mode makes no use of explicit interval timers since that can - be so, well fun on different platforms. Instead, an initial guess - of how many units of work must be done to consume the desired - reporting interval is made, and that guess is refined throughout - the entire test. If something happens to dramatically slow-down - the test, the reproting interval may become must larger for a few - intervals. When things speed-up it is detected very quickly. As - with the --enable-historgram support, if gethrtime() is available - on the platform, it will be used in lieu of gettimeofday(). In any - case, the number of calls to gettimeofday()/gethrtime() is much, - Much, MUCH smaller than for --enable-histogram so while there may - be a measurable effect on the results, it should be rather small. - -*) The global -H option has been enhanced to take an optional address - family specification for the control connection: - - -H <remote>,<family> - - Unlike other comma-separated options, where specifying only one - thing will set both, here specifying only one thing will be - ass-u-me-d to be the <remote> and will leave <family> defaulted - (AF_UNSPEC). Family can be specified as "4" or "inet" for - AF_INET, "6" or "inet6" for AF_INET6. - -*) A new global -L option has been added to specify the local name/IP - and/or address family for the control connection: - - -L <local>,<family> - - Unlike other comma-separated options, where specifying only one - thing will set both, here specifying only one thing will be - ass-u-me-d to be the <local> and will leave <family> defaulted - (AF_UNSPEC). Family can be specified as "4" or "inet" for - AF_INET, "6" or "inet6" for AF_INET6. - -*) Test-specific -H and -L options are present for the TCP, UDP and - SCTP tests, which are now (intended to be) IP protocol version - agnostic. - -*) Global -4 and -6 options will set the both the local and remote - address family to either AF_INET or AF_INET6 respectively. - -*) Test-specific -4 and -6 options have been added for TCP, UDP and - SCTP tests. - -*) Since the basic TCP UDP and SCTP tests are no longer IPv4-only, the - nettest_ipv6.[ch] files are only included in the source - distribution for historical interest. - -*) The main test banners for the TCP, UDP and SCTP tests have been - enhanced to give both local and remote addressing information for - the data connection. - -*) Compilation under Windows is likely FUBAR at this point. I _hope_ - to start trying to do builds under the DDK soon, but am not sure - when I'll be able to start. Any and all assistance you can give - there would be most welcome. - -*) Various and sundry fixes. TCP_RR should no longer go into an - infinite loop when you abort netperf. I'm sure there are others. - -*) Unix domain socket tests are compiled-in with --enable-unix=yes at - configure time. - -*) DLPI tests are compiled-in with --enable-dlpi=yes at configure - time. - -*) XTI tests are compiled-in with --enable-xti=yes at configure time. - -Things not changed in this release: - -*) Seems like everything has changed :) - -These are the Release Notes for Revision 2.3pl2 of netperf: - -Things changed in this release - -*) One can bind netperf or netserver to specific CPUs with the -T - option. This is a generalization of some HP-UX and netserver specific - work from 2.3pl1. - -*) Extend the kludge to workaround the Linux setsockopt/getsockopt - bizzarreness to the socket buffer sizes for the remote side in - addition to the local side. - -*) Fix the lack of initialization of times_up in recv_tcp_maerts() - that caused confidence intervals to fail miserably. - -*) Other misc fixes - than you to all of you who sent them. - -These are the Release Notes for revision 2.3pl1 of netperf: - -Things changed in this release - -*) The bind() call in create_data_socket() in the file nettest_bsd.c - is no longer conditional on the user's specifying an IP address or - port number to which the data socket should be bound. This fixes - the "connection refused" errors in the UDP tests. - -*) Some experimental code to allow one to specify a CPU to which the - remote netserver should be bound. This is intended to allow one to - get greater certainty (as in confidence intervals) on SMP - systems. At present the functionality is HP-UX specific. - Submittals of changes for a more general approach are welcomed. - -These are the Release Notes for revision 2.3 of netperf: - -Things changed in this release - -*) The user can now specify local and/or remote port numbers for the - data connection using the -P test-specific option. This is to - support those folks who want to run netperf through those evil, - end-to-end-breaking things known as firewalls... :) This changes - the format of some of the control messages, hence the bump in the - update number in the VUF. While it may be possible to mix 2.3 and - pre-2.3 netperf and netserver, it is not supported. - -*) The user can now specify local and/or remote IP addresses for the - data connection using the -I test-specific option. This is to - support those folks who want to run netperf through those evil, - end-to-end-breaking things known as firewalls... :) This changes - the format of some of the control messages, hence the bump in the - update number in the VUF. While it may be possible to mix 2.3 and - pre-2.3 netperf and netserver, it is not supported. - -*) Set DL_mumble message priorities in the DLPI tests - -*) Fix error return check for getaddrinfo() - -*) Those systems with gethrtime() can define -DHAVE_GETHRTIME to use - gethrtime() instead of gettimeofday() and reduce the measurement - overhead when enabling the -DHISTOGRAM functionality. - -*) The default for -DHISTOGRAM compilation now adds a UNIT_USEC and - TEN_USEC row and renames TENTH_MSEC to HUNDRED_USEC. If you want - the old behaviour add -DOLD_HISTOGRAM to CFLAGS. - -*) Add missing '!' in the recv_udp*_stream so we recognize the end of - a timed test correctly. - -*) Replace "||" with "&&" to fix an infinite loop in - recv_tcp_conn_rr() most likely introduced in 2.2pl5. - -*) Code has been added to kludge around the bug in Linux getsockopt() - where it almost always returns twice the value for which one - asks unlike virtually every other stack on the face of the - planet. This was doing some unpleasant things to tests in which - confidence intervals were requested. - -Things not changed in this release - -*) Lots :) - -These are the Release Notes for revision 2.2pl5 of netperf: - -Things changed in this release - -*) Improved (perhaps even usable :) support for Windows, including -compilation and run on Win64. - -*) Fixes for MacOS X and FreeBSD - -Things not changed in this release - -*) Specifying the port number(s) for the data connection - -These are the Release Notes for Revision 2.2pl4 of netperf: - -Things changed in this release - -*) USE_SYSCTL available on suitable FreeBSD releases to measure CPU - utilization without having to resort to -DUSE_LOOPER. - -*) Include Solaris 9 with the Linux sendfile path under -DHAVE_SENDFILE - -This still outstanding in this release - -*) Knowing why signals are not interrupting socket calls under - OpenVMS. A quick try to use threads for timing a la Win32 worked, - but also cut performance in half. Any and all assistance in this - area would be most welcome. - -These are the Release Notes for revisoin 2.2pl3 of netperf: - -Things changed in this release - -*) I started practicing what I preach and will set SO_REUSEADDR before - netserver tries to bind to its well-known port. - -*) Initial port to OpenVMS. This includes support for the OVMS - Auxilliary server (inetd replacement). See README.ovms for more - details on what is involved in compiling and running netperf under - OpenVMS. - -*) Testname comparisons are now case insensitive. This is a side - effect of OpenVMS downshifting commandlines to lowercase. I made - the change and decided it was OK to keep it that way, even though - for OpenVMS one _has_ to set the right defines to disable that - downshifting or the command-line options will not work. For example - "-H" will become "-h" which isn't quite the same thing... - -*) Misc fixes for nettest_ipv6.c. - -*) Support for sendfile() under Linux - -Thins I would like to have changed but did not know how or didn't have -time: - -*) Allow netserver to run as a standalone daemon under OpenVMS -*) Allow netserver to run as a standalone daemon under Windows -*) Rediscover an inetd-like facility for Windows -*) Figure-out how to get low-overhead, accurate, per-CPU utilization - figures under OpenVMS -*) Get the UDP_RR and UDP_STREAM tests to work under OpenVMS, and get - the TCP_RR test to work based on time rather than transaction - count. There is some bug (possibly in OpenVMS?) where the SIGALRM - fires, but a socket call will not return an EINTR. - -Things that changed prior to this release: - -*) Addition of the TCP_MAERTS test - this is a TCP_STREAM test where - the data flows from the netserver to the netperf rather than from - the netperf to the netserver. This can be useful in those - situations where netperf (netserver) is installed on a remote - system, but the tester has no shell access and wishes to get - performance data for the path from netserver to netperf. - -These are the Release Notes for the 2.2 revision of netperf: - -Things changed in this release - -*) Various and sundry bugs fixed (in theory) for platforms such as - FreeBSD and Linux. If I left-out your bug fix, it was purely - accidental - my mind has a very small cache, and sometimes I will - "lose" email in the shuffle. - -*) Initial support for sendfile() on HP-UX. This test will use the - sendfile() call instead of send() to send data to the - remote. Netperf "lies" to netserver and calls it a TCP_STREAM test - since what netserver needs to do is exactly the same. A future - patch may change that and simply have netserver call the same - routine for both test types. Kudos to Charles Harris for the - initial prototype. - -*) The Fore ATM API and HiPPI tests have been dropped from the - distribution. - -Things I would have liked to have changed, but did not have time for: - -*) Conversion of the source and makefile to use the GNU configure/autoconf - utility to make it easier for folks to build by not having to edit - makefiles... You will notice that I have started to switch from - "DO_MUMBLE" to "HAVE_MUMBLE" - -as always - happy benchmarking, - -rick jones <raj@cup.hp.com> - ---------------------------------------------------------------------- - -These are the Release Notes for the 2.1pl3 revision of netperf: - -*) An OBOB (Off By One Bug) in netlib.c that was causing a core dump - on Irix should be fixed. - -*) Irix systems should now be able to determine the number of CPU's - present automagically (code from outside, not tested yet because I - have no MP Irix systems at my disposal) - -*) An alpha version of a TCP_CC test has been added - this is a - TCP_CRR test with out the "RR." - -*) The -Ae has been removed from the default makefile. If someone has - a nice way to automagically generate the correct makefile for - different platforms I would like to learn how. - -happy benchmarking, - -rick jones <raj@cup.hp.com> - ----------------------------------------------------------------------- - -These are the Release Notes for the 2.1 revision of netperf: - -Things Changed in this release: - -*) The XTI (Version 2 of the spec) tests are now documented in the - manual. - -*) The TCP_CRR (Connect Request/Response) test is now documented in - the manual, including a description of how it mimics the behaviour - of http (the protocol underlying the WWW). - -*) Support for for Windows NT 3.51 OS in the BSD Sockets tests (ok, so - they are really Winsock in that case :). Other test suites may be - ported as required/desired/appropriate. - -*) Tests for TCP and UDP, using the IPv6 extensions to BSD sockets are - included in this release. They are included by adding -DUSE_IPv6 to - the makefile and recompiling. - -*) Support for a "long long" datatype should only be required for - -DUSE_PSTAT compilation which is an HP-UX only thing. The - *unbundled* HP compilers from at least "HP92453-01 A.09.61 HP C - Compiler" and later should have the required support. The bundled - compiler may not. GCC should work - check the archives listed in - the comp.sys.hp.hpux FAQ for copies. The FAQ is archived on - rtfm.mit.edu under the path pub/usenet/comp.sys.hp.hpux. - -*) A "proper" fix for double data type alignment has been included. - -*) A new script is included with this release which can be used to - measure aggregate TCP_RR performance (multiple, concurrent - instances of the TCP_RR test). A related use of this script would - be measuring MP scaling. A single-byte TCP_RR test is good for this - purpose for two reasons: - - 1) it excercises the control/protocol paths heavily without - using much in the way of data copies which may be easier to - scale. - 2) most systems can easily saturate cards with bandwidth, but - not so easily with request/response - - Of course, feedback on this is most welcome. - -*) When measuring CPU utilization, the units for service demand have - been changed from milliseconds (designated ms) of CPU per unit (KB - or Transaction) to microseconds (desginated us). - -*) For accurate reporting of service demand, netperf needs to know the - number of CPU's present on a system. On some systems (HP-UX), this - is automatic. For others (All), it is necessary to add a global "-n - <numcpu>" option to both netperf and netserver. - - !! IF THIS IS LEFT-OUT CPU UTILIZATION AND SERVICE DEMAND FOR !! - !! MULTI-PROCESSOR SYSTEMS WILL BE WRONG. !! - - If you know of ways to programatically determine the number of - active CPUs on a system, please let the author Rick Jones - <raj@cup.hp.com> know. - -*) other things I've probably forgotten :) - -Things Not Changed in this release: - -*) The ancillary test suites are essentially unchanged - DLPI, - HiPPI/LLA, Unix Domain, and Fore ATM API. Unless there is much - interest expressed in these tests, 2.1 may be the last release in - which they are included. The order of retirement would likely be - Unix Domain, HiPPI/LLA, Fore ATM API, and then DLPI. - -Miscelaneous Comments: - -*) The -DUSE_LOOPER CPU utilization _seems_ to be nice and low-impact - on HP-UX, Digital Unix, and IRIX. It does not yet seem to be - low-impact on Solaris (I need an example of priocntl usage), AIX - (setpri only works if you are root), and NT (not sure of the - reason). Help with those problems would be most appreciated. |