# Copyright 2017 The Abseil Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Adds support for parameterized tests to Python's unittest TestCase class.

A parameterized test is a method in a test case that is invoked with different
argument tuples.

A simple example:

  class AdditionExample(parameterized.TestCase):
    @parameterized.parameters(
       (1, 2, 3),
       (4, 5, 9),
       (1, 1, 3))
    def testAddition(self, op1, op2, result):
      self.assertEqual(result, op1 + op2)


Each invocation is a separate test case and properly isolated just
like a normal test method, with its own setUp/tearDown cycle. In the
example above, there are three separate testcases, one of which will
fail due to an assertion error (1 + 1 != 3).

Parameters for individual test cases can be tuples (with positional parameters)
or dictionaries (with named parameters):

  class AdditionExample(parameterized.TestCase):
    @parameterized.parameters(
       {'op1': 1, 'op2': 2, 'result': 3},
       {'op1': 4, 'op2': 5, 'result': 9},
    )
    def testAddition(self, op1, op2, result):
      self.assertEqual(result, op1 + op2)

If a parameterized test fails, the error message will show the
original test name and the parameters for that test.

The id method of the test, used internally by the unittest framework, is also
modified to show the arguments (but note that the name reported by `id()`
doesn't match the actual test name, see below). To make sure that test names
stay the same across several invocations, object representations like

  >>> class Foo(object):
  ...  pass
  >>> repr(Foo())
  '<__main__.Foo object at 0x23d8610>'

are turned into '<__main__.Foo>'. When selecting a subset of test cases to run
on the command-line, the test cases contain an index suffix for each argument
in the order they were passed to `parameters()` (eg. testAddition0,
testAddition1, etc.) This naming scheme is subject to change; for more reliable
and stable names, especially in test logs, use `named_parameters()` instead.

Tests using `named_parameters()` are similar to `parameters()`, except only
tuples or dicts of args are supported. For tuples, the first parameter arg
has to be a string (or an object that returns an apt name when converted via
str()). For dicts, a value for the key 'testcase_name' must be present and must
be a string (or an object that returns an apt name when converted via str()):

  class NamedExample(parameterized.TestCase):
    @parameterized.named_parameters(
       ('Normal', 'aa', 'aaa', True),
       ('EmptyPrefix', '', 'abc', True),
       ('BothEmpty', '', '', True))
    def testStartsWith(self, prefix, string, result):
      self.assertEqual(result, string.startswith(prefix))

  class NamedExample(parameterized.TestCase):
    @parameterized.named_parameters(
       {'testcase_name': 'Normal',
        'result': True, 'string': 'aaa', 'prefix': 'aa'},
       {'testcase_name': 'EmptyPrefix',
        'result': True, 'string': 'abc', 'prefix': ''},
       {'testcase_name': 'BothEmpty',
        'result': True, 'string': '', 'prefix': ''})
    def testStartsWith(self, prefix, string, result):
      self.assertEqual(result, string.startswith(prefix))

Named tests also have the benefit that they can be run individually
from the command line:

  $ testmodule.py NamedExample.testStartsWithNormal
  .
  --------------------------------------------------------------------
  Ran 1 test in 0.000s

  OK

Parameterized Classes
=====================
If invocation arguments are shared across test methods in a single
TestCase class, instead of decorating all test methods
individually, the class itself can be decorated:

  @parameterized.parameters(
    (1, 2, 3),
    (4, 5, 9))
  class ArithmeticTest(parameterized.TestCase):
    def testAdd(self, arg1, arg2, result):
      self.assertEqual(arg1 + arg2, result)

    def testSubtract(self, arg1, arg2, result):
      self.assertEqual(result - arg1, arg2)

Inputs from Iterables
=====================
If parameters should be shared across several test cases, or are dynamically
created from other sources, a single non-tuple iterable can be passed into
the decorator. This iterable will be used to obtain the test cases:

  class AdditionExample(parameterized.TestCase):
    @parameterized.parameters(
      c.op1, c.op2, c.result for c in testcases
    )
    def testAddition(self, op1, op2, result):
      self.assertEqual(result, op1 + op2)


Single-Argument Test Methods
============================
If a test method takes only one argument, the single arguments must not be
wrapped into a tuple:

  class NegativeNumberExample(parameterized.TestCase):
    @parameterized.parameters(
       -1, -3, -4, -5
    )
    def testIsNegative(self, arg):
      self.assertTrue(IsNegative(arg))


List/tuple as a Single Argument
===============================
If a test method takes a single argument of a list/tuple, it must be wrapped
inside a tuple:

  class ZeroSumExample(parameterized.TestCase):
    @parameterized.parameters(
      ([-1, 0, 1], ),
      ([-2, 0, 2], ),
    )
    def testSumIsZero(self, arg):
      self.assertEqual(0, sum(arg))


Cartesian product of Parameter Values as Parametrized Test Cases
======================================================
If required to test method over a cartesian product of parameters,
`parameterized.product` may be used to facilitate generation of parameters
test combinations:

  class TestModuloExample(parameterized.TestCase):
    @parameterized.product(
        num=[0, 20, 80],
        modulo=[2, 4],
        expected=[0]
    )
    def testModuloResult(self, num, modulo, expected):
      self.assertEqual(expected, num % modulo)

This results in 6 test cases being created - one for each combination of the
parameters. It is also possible to supply sequences of keyword argument dicts
as elements of the cartesian product:

    @parameterized.product(
        (dict(num=5, modulo=3, expected=2),
         dict(num=7, modulo=4, expected=3)),
        dtype=(int, float)
    )
    def testModuloResult(self, num, modulo, expected, dtype):
      self.assertEqual(expected, dtype(num) % modulo)

This results in 4 test cases being created - for each of the two sets of test
data (supplied as kwarg dicts) and for each of the two data types (supplied as
a named parameter). Multiple keyword argument dicts may be supplied if required.

Async Support
===============================
If a test needs to call async functions, it can inherit from both
parameterized.TestCase and another TestCase that supports async calls, such
as [asynctest](https://github.com/Martiusweb/asynctest):

  import asynctest

  class AsyncExample(parameterized.TestCase, asynctest.TestCase):
    @parameterized.parameters(
      ('a', 1),
      ('b', 2),
    )
    async def testSomeAsyncFunction(self, arg, expected):
      actual = await someAsyncFunction(arg)
      self.assertEqual(actual, expected)
"""

from __future__ import absolute_import
from __future__ import division
from __future__ import print_function

import functools
import inspect
import itertools
import re
import types
import unittest

from absl._collections_abc import abc
from absl.testing import absltest


_ADDR_RE = re.compile(r'\<([a-zA-Z0-9_\-\.]+) object at 0x[a-fA-F0-9]+\>')
_NAMED = object()
_ARGUMENT_REPR = object()
_NAMED_DICT_KEY = 'testcase_name'


class NoTestsError(Exception):
  """Raised when parameterized decorators do not generate any tests."""


class DuplicateTestNameError(Exception):
  """Raised when a parameterized test has the same test name multiple times."""

  def __init__(self, test_class_name, new_test_name, original_test_name):
    super(DuplicateTestNameError, self).__init__(
        'Duplicate parameterized test name in {}: generated test name {!r} '
        '(generated from {!r}) already exists. Consider using '
        'named_parameters() to give your tests unique names and/or renaming '
        'the conflicting test method.'.format(
            test_class_name, new_test_name, original_test_name))


def _clean_repr(obj):
  return _ADDR_RE.sub(r'<\1>', repr(obj))


def _non_string_or_bytes_iterable(obj):
  return (isinstance(obj, abc.Iterable) and not isinstance(obj, str) and
          not isinstance(obj, bytes))


def _format_parameter_list(testcase_params):
  if isinstance(testcase_params, abc.Mapping):
    return ', '.join('%s=%s' % (argname, _clean_repr(value))
                     for argname, value in testcase_params.items())
  elif _non_string_or_bytes_iterable(testcase_params):
    return ', '.join(map(_clean_repr, testcase_params))
  else:
    return _format_parameter_list((testcase_params,))


def _async_wrapped(func):
  @functools.wraps(func)
  async def wrapper(*args, **kwargs):
    return await func(*args, **kwargs)
  return wrapper


class _ParameterizedTestIter(object):
  """Callable and iterable class for producing new test cases."""

  def __init__(self, test_method, testcases, naming_type, original_name=None):
    """Returns concrete test functions for a test and a list of parameters.

    The naming_type is used to determine the name of the concrete
    functions as reported by the unittest framework. If naming_type is
    _FIRST_ARG, the testcases must be tuples, and the first element must
    have a string representation that is a valid Python identifier.

    Args:
      test_method: The decorated test method.
      testcases: (list of tuple/dict) A list of parameter tuples/dicts for
          individual test invocations.
      naming_type: The test naming type, either _NAMED or _ARGUMENT_REPR.
      original_name: The original test method name. When decorated on a test
          method, None is passed to __init__ and test_method.__name__ is used.
          Note test_method.__name__ might be different than the original defined
          test method because of the use of other decorators. A more accurate
          value is set by TestGeneratorMetaclass.__new__ later.
    """
    self._test_method = test_method
    self.testcases = testcases
    self._naming_type = naming_type
    if original_name is None:
      original_name = test_method.__name__
    self._original_name = original_name
    self.__name__ = _ParameterizedTestIter.__name__

  def __call__(self, *args, **kwargs):
    raise RuntimeError('You appear to be running a parameterized test case '
                       'without having inherited from parameterized.'
                       'TestCase. This is bad because none of '
                       'your test cases are actually being run. You may also '
                       'be using another decorator before the parameterized '
                       'one, in which case you should reverse the order.')

  def __iter__(self):
    test_method = self._test_method
    naming_type = self._naming_type

    def make_bound_param_test(testcase_params):
      @functools.wraps(test_method)
      def bound_param_test(self):
        if isinstance(testcase_params, abc.Mapping):
          return test_method(self, **testcase_params)
        elif _non_string_or_bytes_iterable(testcase_params):
          return test_method(self, *testcase_params)
        else:
          return test_method(self, testcase_params)

      if naming_type is _NAMED:
        # Signal the metaclass that the name of the test function is unique
        # and descriptive.
        bound_param_test.__x_use_name__ = True

        testcase_name = None
        if isinstance(testcase_params, abc.Mapping):
          if _NAMED_DICT_KEY not in testcase_params:
            raise RuntimeError(
                'Dict for named tests must contain key "%s"' % _NAMED_DICT_KEY)
          # Create a new dict to avoid modifying the supplied testcase_params.
          testcase_name = testcase_params[_NAMED_DICT_KEY]
          testcase_params = {
              k: v for k, v in testcase_params.items() if k != _NAMED_DICT_KEY
          }
        elif _non_string_or_bytes_iterable(testcase_params):
          if not isinstance(testcase_params[0], str):
            raise RuntimeError(
                'The first element of named test parameters is the test name '
                'suffix and must be a string')
          testcase_name = testcase_params[0]
          testcase_params = testcase_params[1:]
        else:
          raise RuntimeError(
              'Named tests must be passed a dict or non-string iterable.')

        test_method_name = self._original_name
        # Support PEP-8 underscore style for test naming if used.
        if (test_method_name.startswith('test_')
            and testcase_name
            and not testcase_name.startswith('_')):
          test_method_name += '_'

        bound_param_test.__name__ = test_method_name + str(testcase_name)
      elif naming_type is _ARGUMENT_REPR:
        # If it's a generator, convert it to a tuple and treat them as
        # parameters.
        if isinstance(testcase_params, types.GeneratorType):
          testcase_params = tuple(testcase_params)
        # The metaclass creates a unique, but non-descriptive method name for
        # _ARGUMENT_REPR tests using an indexed suffix.
        # To keep test names descriptive, only the original method name is used.
        # To make sure test names are unique, we add a unique descriptive suffix
        # __x_params_repr__ for every test.
        params_repr = '(%s)' % (_format_parameter_list(testcase_params),)
        bound_param_test.__x_params_repr__ = params_repr
      else:
        raise RuntimeError('%s is not a valid naming type.' % (naming_type,))

      bound_param_test.__doc__ = '%s(%s)' % (
          bound_param_test.__name__, _format_parameter_list(testcase_params))
      if test_method.__doc__:
        bound_param_test.__doc__ += '\n%s' % (test_method.__doc__,)
      if inspect.iscoroutinefunction(test_method):
        return _async_wrapped(bound_param_test)
      return bound_param_test

    return (make_bound_param_test(c) for c in self.testcases)


def _modify_class(class_object, testcases, naming_type):
  assert not getattr(class_object, '_test_params_reprs', None), (
      'Cannot add parameters to %s. Either it already has parameterized '
      'methods, or its super class is also a parameterized class.' % (
          class_object,))
  # NOTE: _test_params_repr is private to parameterized.TestCase and it's
  # metaclass; do not use it outside of those classes.
  class_object._test_params_reprs = test_params_reprs = {}
  for name, obj in class_object.__dict__.copy().items():
    if (name.startswith(unittest.TestLoader.testMethodPrefix)
        and isinstance(obj, types.FunctionType)):
      delattr(class_object, name)
      methods = {}
      _update_class_dict_for_param_test_case(
          class_object.__name__, methods, test_params_reprs, name,
          _ParameterizedTestIter(obj, testcases, naming_type, name))
      for meth_name, meth in methods.items():
        setattr(class_object, meth_name, meth)


def _parameter_decorator(naming_type, testcases):
  """Implementation of the parameterization decorators.

  Args:
    naming_type: The naming type.
    testcases: Testcase parameters.

  Raises:
    NoTestsError: Raised when the decorator generates no tests.

  Returns:
    A function for modifying the decorated object.
  """
  def _apply(obj):
    if isinstance(obj, type):
      _modify_class(obj, testcases, naming_type)
      return obj
    else:
      return _ParameterizedTestIter(obj, testcases, naming_type)

  if (len(testcases) == 1 and
      not isinstance(testcases[0], tuple) and
      not isinstance(testcases[0], abc.Mapping)):
    # Support using a single non-tuple parameter as a list of test cases.
    # Note that the single non-tuple parameter can't be Mapping either, which
    # means a single dict parameter case.
    assert _non_string_or_bytes_iterable(testcases[0]), (
        'Single parameter argument must be a non-string non-Mapping iterable')
    testcases = testcases[0]

  if not isinstance(testcases, abc.Sequence):
    testcases = list(testcases)
  if not testcases:
    raise NoTestsError(
        'parameterized test decorators did not generate any tests. '
        'Make sure you specify non-empty parameters, '
        'and do not reuse generators more than once.')

  return _apply


def parameters(*testcases):
  """A decorator for creating parameterized tests.

  See the module docstring for a usage example.

  Args:
    *testcases: Parameters for the decorated method, either a single
        iterable, or a list of tuples/dicts/objects (for tests with only one
        argument).

  Raises:
    NoTestsError: Raised when the decorator generates no tests.

  Returns:
     A test generator to be handled by TestGeneratorMetaclass.
  """
  return _parameter_decorator(_ARGUMENT_REPR, testcases)


def named_parameters(*testcases):
  """A decorator for creating parameterized tests.

  See the module docstring for a usage example. For every parameter tuple
  passed, the first element of the tuple should be a string and will be appended
  to the name of the test method. Each parameter dict passed must have a value
  for the key "testcase_name", the string representation of that value will be
  appended to the name of the test method.

  Args:
    *testcases: Parameters for the decorated method, either a single iterable,
        or a list of tuples or dicts.

  Raises:
    NoTestsError: Raised when the decorator generates no tests.

  Returns:
     A test generator to be handled by TestGeneratorMetaclass.
  """
  return _parameter_decorator(_NAMED, testcases)


def product(*kwargs_seqs, **testgrid):
  """A decorator for running tests over cartesian product of parameters values.

  See the module docstring for a usage example. The test will be run for every
  possible combination of the parameters.

  Args:
    *kwargs_seqs: Each positional parameter is a sequence of keyword arg dicts;
      every test case generated will include exactly one kwargs dict from each
      positional parameter; these will then be merged to form an overall list
      of arguments for the test case.
    **testgrid: A mapping of parameter names and their possible values. Possible
      values should given as either a list or a tuple.

  Raises:
    NoTestsError: Raised when the decorator generates no tests.

  Returns:
     A test generator to be handled by TestGeneratorMetaclass.
  """

  for name, values in testgrid.items():
    assert isinstance(values, (list, tuple)), (
        'Values of {} must be given as list or tuple, found {}'.format(
            name, type(values)))

  prior_arg_names = set()
  for kwargs_seq in kwargs_seqs:
    assert ((isinstance(kwargs_seq, (list, tuple))) and
            all(isinstance(kwargs, dict) for kwargs in kwargs_seq)), (
                'Positional parameters must be a sequence of keyword arg'
                'dicts, found {}'
                .format(kwargs_seq))
    if kwargs_seq:
      arg_names = set(kwargs_seq[0])
      assert all(set(kwargs) == arg_names for kwargs in kwargs_seq), (
          'Keyword argument dicts within a single parameter must all have the '
          'same keys, found {}'.format(kwargs_seq))
      assert not (arg_names & prior_arg_names), (
          'Keyword argument dict sequences must all have distinct argument '
          'names, found duplicate(s) {}'
          .format(sorted(arg_names & prior_arg_names)))
      prior_arg_names |= arg_names

  assert not (prior_arg_names & set(testgrid)), (
      'Arguments supplied in kwargs dicts in positional parameters must not '
      'overlap with arguments supplied as named parameters; found duplicate '
      'argument(s) {}'.format(sorted(prior_arg_names & set(testgrid))))

  # Convert testgrid into a sequence of sequences of kwargs dicts and combine
  # with the positional parameters.
  # So foo=[1,2], bar=[3,4] --> [[{foo: 1}, {foo: 2}], [{bar: 3, bar: 4}]]
  testgrid = (tuple({k: v} for v in vs) for k, vs in testgrid.items())
  testgrid = tuple(kwargs_seqs) + tuple(testgrid)

  # Create all possible combinations of parameters as a cartesian product
  # of parameter values.
  testcases = [
      dict(itertools.chain.from_iterable(case.items()
                                         for case in cases))
      for cases in itertools.product(*testgrid)
  ]
  return _parameter_decorator(_ARGUMENT_REPR, testcases)


class TestGeneratorMetaclass(type):
  """Metaclass for adding tests generated by parameterized decorators."""

  def __new__(cls, class_name, bases, dct):
    # NOTE: _test_params_repr is private to parameterized.TestCase and it's
    # metaclass; do not use it outside of those classes.
    test_params_reprs = dct.setdefault('_test_params_reprs', {})
    for name, obj in dct.copy().items():
      if (name.startswith(unittest.TestLoader.testMethodPrefix) and
          _non_string_or_bytes_iterable(obj)):
        # NOTE: `obj` might not be a _ParameterizedTestIter in two cases:
        # 1. a class-level iterable named test* that isn't a test, such as
        #    a list of something. Such attributes get deleted from the class.
        #
        # 2. If a decorator is applied to the parameterized test, e.g.
        #    @morestuff
        #    @parameterized.parameters(...)
        #    def test_foo(...): ...
        #
        #   This is OK so long as the underlying parameterized function state
        #   is forwarded (e.g. using functool.wraps() and **without**
        #   accessing explicitly accessing the internal attributes.
        if isinstance(obj, _ParameterizedTestIter):
          # Update the original test method name so it's more accurate.
          # The mismatch might happen when another decorator is used inside
          # the parameterized decrators, and the inner decorator doesn't
          # preserve its __name__.
          obj._original_name = name
        iterator = iter(obj)
        dct.pop(name)
        _update_class_dict_for_param_test_case(
            class_name, dct, test_params_reprs, name, iterator)
    # If the base class is a subclass of parameterized.TestCase, inherit its
    # _test_params_reprs too.
    for base in bases:
      # Check if the base has _test_params_reprs first, then check if it's a
      # subclass of parameterized.TestCase. Otherwise when this is called for
      # the parameterized.TestCase definition itself, this raises because
      # itself is not defined yet. This works as long as absltest.TestCase does
      # not define _test_params_reprs.
      base_test_params_reprs = getattr(base, '_test_params_reprs', None)
      if base_test_params_reprs and issubclass(base, TestCase):
        for test_method, test_method_id in base_test_params_reprs.items():
          # test_method may both exists in base and this class.
          # This class's method overrides base class's.
          # That's why it should only inherit it if it does not exist.
          test_params_reprs.setdefault(test_method, test_method_id)

    return type.__new__(cls, class_name, bases, dct)


def _update_class_dict_for_param_test_case(
    test_class_name, dct, test_params_reprs, name, iterator):
  """Adds individual test cases to a dictionary.

  Args:
    test_class_name: The name of the class tests are added to.
    dct: The target dictionary.
    test_params_reprs: The dictionary for mapping names to test IDs.
    name: The original name of the test case.
    iterator: The iterator generating the individual test cases.

  Raises:
    DuplicateTestNameError: Raised when a test name occurs multiple times.
    RuntimeError: If non-parameterized functions are generated.
  """
  for idx, func in enumerate(iterator):
    assert callable(func), 'Test generators must yield callables, got %r' % (
        func,)
    if not (getattr(func, '__x_use_name__', None) or
            getattr(func, '__x_params_repr__', None)):
      raise RuntimeError(
          '{}.{} generated a test function without using the parameterized '
          'decorators. Only tests generated using the decorators are '
          'supported.'.format(test_class_name, name))

    if getattr(func, '__x_use_name__', False):
      original_name = func.__name__
      new_name = original_name
    else:
      original_name = name
      new_name = '%s%d' % (original_name, idx)

    if new_name in dct:
      raise DuplicateTestNameError(test_class_name, new_name, original_name)

    dct[new_name] = func
    test_params_reprs[new_name] = getattr(func, '__x_params_repr__', '')


class TestCase(absltest.TestCase, metaclass=TestGeneratorMetaclass):
  """Base class for test cases using the parameters decorator."""

  # visibility: private; do not call outside this class.
  def _get_params_repr(self):
    return self._test_params_reprs.get(self._testMethodName, '')

  def __str__(self):
    params_repr = self._get_params_repr()
    if params_repr:
      params_repr = ' ' + params_repr
    return '{}{} ({})'.format(
        self._testMethodName, params_repr,
        unittest.util.strclass(self.__class__))

  def id(self):
    """Returns the descriptive ID of the test.

    This is used internally by the unittesting framework to get a name
    for the test to be used in reports.

    Returns:
      The test id.
    """
    base = super(TestCase, self).id()
    params_repr = self._get_params_repr()
    if params_repr:
      # We include the params in the id so that, when reported in the
      # test.xml file, the value is more informative than just "test_foo0".
      # Use a space to separate them so that it's copy/paste friendly and
      # easy to identify the actual test id.
      return '{} {}'.format(base, params_repr)
    else:
      return base


# This function is kept CamelCase because it's used as a class's base class.
def CoopTestCase(other_base_class):  # pylint: disable=invalid-name
  """Returns a new base class with a cooperative metaclass base.

  This enables the TestCase to be used in combination
  with other base classes that have custom metaclasses, such as
  mox.MoxTestBase.

  Only works with metaclasses that do not override type.__new__.

  Example:

    from absl.testing import parameterized

    class ExampleTest(parameterized.CoopTestCase(OtherTestCase)):
      ...

  Args:
    other_base_class: (class) A test case base class.

  Returns:
    A new class object.
  """
  metaclass = type(
      'CoopMetaclass',
      (other_base_class.__metaclass__,
       TestGeneratorMetaclass), {})
  return metaclass(
      'CoopTestCase',
      (other_base_class, TestCase), {})