diff options
-rw-r--r-- | CHANGELOG | 5 | ||||
-rw-r--r-- | LICENSE | 13 | ||||
-rw-r--r-- | MANIFEST.in | 7 | ||||
-rw-r--r-- | Makefile | 36 | ||||
-rw-r--r-- | README.rst | 2 | ||||
-rw-r--r-- | distribute_setup.py | 546 | ||||
-rw-r--r-- | docs/Makefile | 153 | ||||
-rw-r--r-- | docs/_templates/page.html | 9 | ||||
-rw-r--r-- | docs/conf.py | 251 | ||||
-rw-r--r-- | docs/index.rst | 22 | ||||
-rw-r--r-- | funcsigs/__init__.py | 1 | ||||
-rw-r--r-- | funcsigs/version.py | 1 | ||||
-rw-r--r-- | requirements/development.txt | 5 | ||||
-rw-r--r-- | requirements/production.txt | 0 | ||||
-rw-r--r-- | setup.py | 57 | ||||
-rw-r--r-- | tests/__init__.py | 0 | ||||
-rw-r--r-- | tests/test_funcsigs.py | 19 |
17 files changed, 1127 insertions, 0 deletions
diff --git a/CHANGELOG b/CHANGELOG new file mode 100644 index 0000000..77622c9 --- /dev/null +++ b/CHANGELOG @@ -0,0 +1,5 @@ +Changelog +--------- + +Next release 0.1 +```````````````` @@ -0,0 +1,13 @@ +Copyright 2013 Aaron Iles + +Licensed under the Apache License, Version 2.0 (the "License"); +you may not use this file except in compliance with the License. +You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, software +distributed under the License is distributed on an "AS IS" BASIS, +WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +See the License for the specific language governing permissions and +limitations under the License. diff --git a/MANIFEST.in b/MANIFEST.in new file mode 100644 index 0000000..f0abb42 --- /dev/null +++ b/MANIFEST.in @@ -0,0 +1,7 @@ +recursive-include docs * +recursive-include tests *.py +include *.py +include CHANGELOG +include LICENSE +include MANIFEST.in +include README.rst diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..6b54824 --- /dev/null +++ b/Makefile @@ -0,0 +1,36 @@ +SHELL := /bin/bash + +deps: + pip install --upgrade --use-mirrors \ + -r requirements/development.txt \ + -r requirements/production.txt + +sdist: + python setup.py sdist + +# register: +# python setup.py register + +site: + cd docs; make html + +test: + coverage run setup.py test + +unittest: + coverage run -m unittest discover + +lint: + flake8 --exit-zero funcsigs tests + +coverage: + coverage report --show-missing --include="funcsigs*" + +clean: + python setup.py clean --all + find . -type f -name "*.pyc" -exec rm '{}' + + find . -type d -name "__pycache__" -exec rmdir '{}' + + rm -rf *.egg-info .coverage + cd docs; make clean + +docs: site diff --git a/README.rst b/README.rst new file mode 100644 index 0000000..7ce4eb9 --- /dev/null +++ b/README.rst @@ -0,0 +1,2 @@ +funcsigs +======== diff --git a/distribute_setup.py b/distribute_setup.py new file mode 100644 index 0000000..a1cc2a1 --- /dev/null +++ b/distribute_setup.py @@ -0,0 +1,546 @@ +#!python +"""Bootstrap distribute installation + +If you want to use setuptools in your package's setup.py, just include this +file in the same directory with it, and add this to the top of your setup.py:: + + from distribute_setup import use_setuptools + use_setuptools() + +If you want to require a specific version of setuptools, set a download +mirror, or use an alternate download directory, you can do so by supplying +the appropriate options to ``use_setuptools()``. + +This file can also be run as a script to install or upgrade setuptools. +""" +import os +import shutil +import sys +import time +import fnmatch +import tempfile +import tarfile +import optparse + +from distutils import log + +try: + from site import USER_SITE +except ImportError: + USER_SITE = None + +try: + import subprocess + + def _python_cmd(*args): + args = (sys.executable,) + args + return subprocess.call(args) == 0 + +except ImportError: + # will be used for python 2.3 + def _python_cmd(*args): + args = (sys.executable,) + args + # quoting arguments if windows + if sys.platform == 'win32': + def quote(arg): + if ' ' in arg: + return '"%s"' % arg + return arg + args = [quote(arg) for arg in args] + return os.spawnl(os.P_WAIT, sys.executable, *args) == 0 + +DEFAULT_VERSION = "0.6.34" +DEFAULT_URL = "http://pypi.python.org/packages/source/d/distribute/" +SETUPTOOLS_FAKED_VERSION = "0.6c11" + +SETUPTOOLS_PKG_INFO = """\ +Metadata-Version: 1.0 +Name: setuptools +Version: %s +Summary: xxxx +Home-page: xxx +Author: xxx +Author-email: xxx +License: xxx +Description: xxx +""" % SETUPTOOLS_FAKED_VERSION + + +def _install(tarball, install_args=()): + # extracting the tarball + tmpdir = tempfile.mkdtemp() + log.warn('Extracting in %s', tmpdir) + old_wd = os.getcwd() + try: + os.chdir(tmpdir) + tar = tarfile.open(tarball) + _extractall(tar) + tar.close() + + # going in the directory + subdir = os.path.join(tmpdir, os.listdir(tmpdir)[0]) + os.chdir(subdir) + log.warn('Now working in %s', subdir) + + # installing + log.warn('Installing Distribute') + if not _python_cmd('setup.py', 'install', *install_args): + log.warn('Something went wrong during the installation.') + log.warn('See the error message above.') + # exitcode will be 2 + return 2 + finally: + os.chdir(old_wd) + shutil.rmtree(tmpdir) + + +def _build_egg(egg, tarball, to_dir): + # extracting the tarball + tmpdir = tempfile.mkdtemp() + log.warn('Extracting in %s', tmpdir) + old_wd = os.getcwd() + try: + os.chdir(tmpdir) + tar = tarfile.open(tarball) + _extractall(tar) + tar.close() + + # going in the directory + subdir = os.path.join(tmpdir, os.listdir(tmpdir)[0]) + os.chdir(subdir) + log.warn('Now working in %s', subdir) + + # building an egg + log.warn('Building a Distribute egg in %s', to_dir) + _python_cmd('setup.py', '-q', 'bdist_egg', '--dist-dir', to_dir) + + finally: + os.chdir(old_wd) + shutil.rmtree(tmpdir) + # returning the result + log.warn(egg) + if not os.path.exists(egg): + raise IOError('Could not build the egg.') + + +def _do_download(version, download_base, to_dir, download_delay): + egg = os.path.join(to_dir, 'distribute-%s-py%d.%d.egg' + % (version, sys.version_info[0], sys.version_info[1])) + if not os.path.exists(egg): + tarball = download_setuptools(version, download_base, + to_dir, download_delay) + _build_egg(egg, tarball, to_dir) + sys.path.insert(0, egg) + import setuptools + setuptools.bootstrap_install_from = egg + + +def use_setuptools(version=DEFAULT_VERSION, download_base=DEFAULT_URL, + to_dir=os.curdir, download_delay=15, no_fake=True): + # making sure we use the absolute path + to_dir = os.path.abspath(to_dir) + was_imported = 'pkg_resources' in sys.modules or \ + 'setuptools' in sys.modules + try: + try: + import pkg_resources + if not hasattr(pkg_resources, '_distribute'): + if not no_fake: + _fake_setuptools() + raise ImportError + except ImportError: + return _do_download(version, download_base, to_dir, download_delay) + try: + pkg_resources.require("distribute>=" + version) + return + except pkg_resources.VersionConflict: + e = sys.exc_info()[1] + if was_imported: + sys.stderr.write( + "The required version of distribute (>=%s) is not available,\n" + "and can't be installed while this script is running. Please\n" + "install a more recent version first, using\n" + "'easy_install -U distribute'." + "\n\n(Currently using %r)\n" % (version, e.args[0])) + sys.exit(2) + else: + del pkg_resources, sys.modules['pkg_resources'] # reload ok + return _do_download(version, download_base, to_dir, + download_delay) + except pkg_resources.DistributionNotFound: + return _do_download(version, download_base, to_dir, + download_delay) + finally: + if not no_fake: + _create_fake_setuptools_pkg_info(to_dir) + + +def download_setuptools(version=DEFAULT_VERSION, download_base=DEFAULT_URL, + to_dir=os.curdir, delay=15): + """Download distribute from a specified location and return its filename + + `version` should be a valid distribute version number that is available + as an egg for download under the `download_base` URL (which should end + with a '/'). `to_dir` is the directory where the egg will be downloaded. + `delay` is the number of seconds to pause before an actual download + attempt. + """ + # making sure we use the absolute path + to_dir = os.path.abspath(to_dir) + try: + from urllib.request import urlopen + except ImportError: + from urllib2 import urlopen + tgz_name = "distribute-%s.tar.gz" % version + url = download_base + tgz_name + saveto = os.path.join(to_dir, tgz_name) + src = dst = None + if not os.path.exists(saveto): # Avoid repeated downloads + try: + log.warn("Downloading %s", url) + src = urlopen(url) + # Read/write all in one block, so we don't create a corrupt file + # if the download is interrupted. + data = src.read() + dst = open(saveto, "wb") + dst.write(data) + finally: + if src: + src.close() + if dst: + dst.close() + return os.path.realpath(saveto) + + +def _no_sandbox(function): + def __no_sandbox(*args, **kw): + try: + from setuptools.sandbox import DirectorySandbox + if not hasattr(DirectorySandbox, '_old'): + def violation(*args): + pass + DirectorySandbox._old = DirectorySandbox._violation + DirectorySandbox._violation = violation + patched = True + else: + patched = False + except ImportError: + patched = False + + try: + return function(*args, **kw) + finally: + if patched: + DirectorySandbox._violation = DirectorySandbox._old + del DirectorySandbox._old + + return __no_sandbox + + +def _patch_file(path, content): + """Will backup the file then patch it""" + f = open(path) + existing_content = f.read() + f.close() + if existing_content == content: + # already patched + log.warn('Already patched.') + return False + log.warn('Patching...') + _rename_path(path) + f = open(path, 'w') + try: + f.write(content) + finally: + f.close() + return True + +_patch_file = _no_sandbox(_patch_file) + + +def _same_content(path, content): + f = open(path) + existing_content = f.read() + f.close() + return existing_content == content + + +def _rename_path(path): + new_name = path + '.OLD.%s' % time.time() + log.warn('Renaming %s to %s', path, new_name) + os.rename(path, new_name) + return new_name + + +def _remove_flat_installation(placeholder): + if not os.path.isdir(placeholder): + log.warn('Unkown installation at %s', placeholder) + return False + found = False + for file in os.listdir(placeholder): + if fnmatch.fnmatch(file, 'setuptools*.egg-info'): + found = True + break + if not found: + log.warn('Could not locate setuptools*.egg-info') + return + + log.warn('Moving elements out of the way...') + pkg_info = os.path.join(placeholder, file) + if os.path.isdir(pkg_info): + patched = _patch_egg_dir(pkg_info) + else: + patched = _patch_file(pkg_info, SETUPTOOLS_PKG_INFO) + + if not patched: + log.warn('%s already patched.', pkg_info) + return False + # now let's move the files out of the way + for element in ('setuptools', 'pkg_resources.py', 'site.py'): + element = os.path.join(placeholder, element) + if os.path.exists(element): + _rename_path(element) + else: + log.warn('Could not find the %s element of the ' + 'Setuptools distribution', element) + return True + +_remove_flat_installation = _no_sandbox(_remove_flat_installation) + + +def _after_install(dist): + log.warn('After install bootstrap.') + placeholder = dist.get_command_obj('install').install_purelib + _create_fake_setuptools_pkg_info(placeholder) + + +def _create_fake_setuptools_pkg_info(placeholder): + if not placeholder or not os.path.exists(placeholder): + log.warn('Could not find the install location') + return + pyver = '%s.%s' % (sys.version_info[0], sys.version_info[1]) + setuptools_file = 'setuptools-%s-py%s.egg-info' % \ + (SETUPTOOLS_FAKED_VERSION, pyver) + pkg_info = os.path.join(placeholder, setuptools_file) + if os.path.exists(pkg_info): + log.warn('%s already exists', pkg_info) + return + + log.warn('Creating %s', pkg_info) + try: + f = open(pkg_info, 'w') + except EnvironmentError: + log.warn("Don't have permissions to write %s, skipping", pkg_info) + return + try: + f.write(SETUPTOOLS_PKG_INFO) + finally: + f.close() + + pth_file = os.path.join(placeholder, 'setuptools.pth') + log.warn('Creating %s', pth_file) + f = open(pth_file, 'w') + try: + f.write(os.path.join(os.curdir, setuptools_file)) + finally: + f.close() + +_create_fake_setuptools_pkg_info = _no_sandbox( + _create_fake_setuptools_pkg_info +) + + +def _patch_egg_dir(path): + # let's check if it's already patched + pkg_info = os.path.join(path, 'EGG-INFO', 'PKG-INFO') + if os.path.exists(pkg_info): + if _same_content(pkg_info, SETUPTOOLS_PKG_INFO): + log.warn('%s already patched.', pkg_info) + return False + _rename_path(path) + os.mkdir(path) + os.mkdir(os.path.join(path, 'EGG-INFO')) + pkg_info = os.path.join(path, 'EGG-INFO', 'PKG-INFO') + f = open(pkg_info, 'w') + try: + f.write(SETUPTOOLS_PKG_INFO) + finally: + f.close() + return True + +_patch_egg_dir = _no_sandbox(_patch_egg_dir) + + +def _before_install(): + log.warn('Before install bootstrap.') + _fake_setuptools() + + +def _under_prefix(location): + if 'install' not in sys.argv: + return True + args = sys.argv[sys.argv.index('install') + 1:] + for index, arg in enumerate(args): + for option in ('--root', '--prefix'): + if arg.startswith('%s=' % option): + top_dir = arg.split('root=')[-1] + return location.startswith(top_dir) + elif arg == option: + if len(args) > index: + top_dir = args[index + 1] + return location.startswith(top_dir) + if arg == '--user' and USER_SITE is not None: + return location.startswith(USER_SITE) + return True + + +def _fake_setuptools(): + log.warn('Scanning installed packages') + try: + import pkg_resources + except ImportError: + # we're cool + log.warn('Setuptools or Distribute does not seem to be installed.') + return + ws = pkg_resources.working_set + try: + setuptools_dist = ws.find( + pkg_resources.Requirement.parse('setuptools', replacement=False) + ) + except TypeError: + # old distribute API + setuptools_dist = ws.find( + pkg_resources.Requirement.parse('setuptools') + ) + + if setuptools_dist is None: + log.warn('No setuptools distribution found') + return + # detecting if it was already faked + setuptools_location = setuptools_dist.location + log.warn('Setuptools installation detected at %s', setuptools_location) + + # if --root or --preix was provided, and if + # setuptools is not located in them, we don't patch it + if not _under_prefix(setuptools_location): + log.warn('Not patching, --root or --prefix is installing Distribute' + ' in another location') + return + + # let's see if its an egg + if not setuptools_location.endswith('.egg'): + log.warn('Non-egg installation') + res = _remove_flat_installation(setuptools_location) + if not res: + return + else: + log.warn('Egg installation') + pkg_info = os.path.join(setuptools_location, 'EGG-INFO', 'PKG-INFO') + if (os.path.exists(pkg_info) and + _same_content(pkg_info, SETUPTOOLS_PKG_INFO)): + log.warn('Already patched.') + return + log.warn('Patching...') + # let's create a fake egg replacing setuptools one + res = _patch_egg_dir(setuptools_location) + if not res: + return + log.warn('Patching complete.') + _relaunch() + + +def _relaunch(): + log.warn('Relaunching...') + # we have to relaunch the process + # pip marker to avoid a relaunch bug + _cmd1 = ['-c', 'install', '--single-version-externally-managed'] + _cmd2 = ['-c', 'install', '--record'] + if sys.argv[:3] == _cmd1 or sys.argv[:3] == _cmd2: + sys.argv[0] = 'setup.py' + args = [sys.executable] + sys.argv + sys.exit(subprocess.call(args)) + + +def _extractall(self, path=".", members=None): + """Extract all members from the archive to the current working + directory and set owner, modification time and permissions on + directories afterwards. `path' specifies a different directory + to extract to. `members' is optional and must be a subset of the + list returned by getmembers(). + """ + import copy + import operator + from tarfile import ExtractError + directories = [] + + if members is None: + members = self + + for tarinfo in members: + if tarinfo.isdir(): + # Extract directories with a safe mode. + directories.append(tarinfo) + tarinfo = copy.copy(tarinfo) + tarinfo.mode = 448 # decimal for oct 0700 + self.extract(tarinfo, path) + + # Reverse sort directories. + if sys.version_info < (2, 4): + def sorter(dir1, dir2): + return cmp(dir1.name, dir2.name) + directories.sort(sorter) + directories.reverse() + else: + directories.sort(key=operator.attrgetter('name'), reverse=True) + + # Set correct owner, mtime and filemode on directories. + for tarinfo in directories: + dirpath = os.path.join(path, tarinfo.name) + try: + self.chown(tarinfo, dirpath) + self.utime(tarinfo, dirpath) + self.chmod(tarinfo, dirpath) + except ExtractError: + e = sys.exc_info()[1] + if self.errorlevel > 1: + raise + else: + self._dbg(1, "tarfile: %s" % e) + + +def _build_install_args(options): + """ + Build the arguments to 'python setup.py install' on the distribute package + """ + install_args = [] + if options.user_install: + if sys.version_info < (2, 6): + log.warn("--user requires Python 2.6 or later") + raise SystemExit(1) + install_args.append('--user') + return install_args + +def _parse_args(): + """ + Parse the command line for options + """ + parser = optparse.OptionParser() + parser.add_option( + '--user', dest='user_install', action='store_true', default=False, + help='install in user site package (requires Python 2.6 or later)') + parser.add_option( + '--download-base', dest='download_base', metavar="URL", + default=DEFAULT_URL, + help='alternative URL from where to download the distribute package') + options, args = parser.parse_args() + # positional arguments are ignored + return options + +def main(version=DEFAULT_VERSION): + """Install or upgrade setuptools and EasyInstall""" + options = _parse_args() + tarball = download_setuptools(download_base=options.download_base) + return _install(tarball, _build_install_args(options)) + +if __name__ == '__main__': + sys.exit(main()) diff --git a/docs/Makefile b/docs/Makefile new file mode 100644 index 0000000..f7ab3d1 --- /dev/null +++ b/docs/Makefile @@ -0,0 +1,153 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = _build + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext + +help: + @echo "Please use \`make <target>' where <target> is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + +clean: + -rm -rf $(BUILDDIR) + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/funcsigs.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/funcsigs.qhc" + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/funcsigs" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/funcsigs" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." diff --git a/docs/_templates/page.html b/docs/_templates/page.html new file mode 100644 index 0000000..5e1e00b --- /dev/null +++ b/docs/_templates/page.html @@ -0,0 +1,9 @@ +{% extends "!page.html" %} +{% block extrahead %} + <a href="https://github.com/aliles/funcsigs"> + <img style="position: absolute; top: 0; right: 0; border: 0;" + src="https://s3.amazonaws.com/github/ribbons/forkme_right_red_aa0000.png" + alt="Fork me on GitHub"> + </a> + {{ super() }} +{% endblock %} diff --git a/docs/conf.py b/docs/conf.py new file mode 100644 index 0000000..c6e4194 --- /dev/null +++ b/docs/conf.py @@ -0,0 +1,251 @@ +#!/usr/bin/env python3 +# -*- coding: utf-8 -*- +# +# funcsigs documentation build configuration file, created by +# sphinx-quickstart on Fri Apr 20 20:27:52 2012. +# +# This file is execfile()d with the current directory set to its containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys, os + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath('..')) + +# -- General configuration ----------------------------------------------------- + +# If your documentation needs a minimal Sphinx version, state it here. +#needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be extensions +# coming with Sphinx (named 'sphinx.ext.*') or your custom ones. +extensions = ['sphinx.ext.autodoc', 'sphinx.ext.intersphinx', 'sphinx.ext.viewcode'] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix of source filenames. +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = 'funcsigs' +copyright = '2013, Aaron Iles' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +from funcsigs import __version__ +version = '.'.join(__version__.split('.')[:2]) +# The full version, including alpha/beta/rc tags. +release = __version__ + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +#language = None + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = ['_build'] + +# The reST default role (used for this markup: `text`) to use for all documents. +#default_role = None + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + + +# -- Options for HTML output --------------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. +html_theme = 'agogo' + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# "<project> v<release> documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a <link> tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Output file base name for HTML help builder. +htmlhelp_basename = 'funcsigsdoc' + + +# -- Options for LaTeX output -------------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, author, documentclass [howto/manual]). +latex_documents = [ + ('index', 'funcsigs.tex', 'funcsigs Documentation', + 'Aaron Iles', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output -------------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + ('index', 'funcsigs', 'funcsigs Documentation', + ['Aaron Iles'], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------------ + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + ('index', 'funcsigs', 'funcsigs Documentation', + 'Aaron Iles', 'funcsigs', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + + +# Example configuration for intersphinx: refer to the Python standard library. +intersphinx_mapping = { + 'python3': ('http://docs.python.org/py3k', None), + 'python': ('http://docs.python.org/', None) +} diff --git a/docs/index.rst b/docs/index.rst new file mode 100644 index 0000000..5564419 --- /dev/null +++ b/docs/index.rst @@ -0,0 +1,22 @@ +.. funcsigs documentation master file, created by + sphinx-quickstart on Fri Apr 20 20:27:52 2012. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to funcsigs's documentation! +====================================== + +Contents: + +.. toctree:: + :maxdepth: 2 + + + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` + diff --git a/funcsigs/__init__.py b/funcsigs/__init__.py new file mode 100644 index 0000000..129426d --- /dev/null +++ b/funcsigs/__init__.py @@ -0,0 +1 @@ +from funcsigs.version import __version__ diff --git a/funcsigs/version.py b/funcsigs/version.py new file mode 100644 index 0000000..a4e2017 --- /dev/null +++ b/funcsigs/version.py @@ -0,0 +1 @@ +__version__ = "0.1" diff --git a/requirements/development.txt b/requirements/development.txt new file mode 100644 index 0000000..4a8fdb3 --- /dev/null +++ b/requirements/development.txt @@ -0,0 +1,5 @@ +coverage +distribute +pip +flake8 +sphinx diff --git a/requirements/production.txt b/requirements/production.txt new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/requirements/production.txt diff --git a/setup.py b/setup.py new file mode 100644 index 0000000..d61a143 --- /dev/null +++ b/setup.py @@ -0,0 +1,57 @@ +#!/usr/bin/env python +from distribute_setup import use_setuptools +use_setuptools() + +from setuptools import setup +import re +import sys + +def load_version(filename='funcsigs/version.py'): + "Parse a __version__ number from a source file" + with open(filename) as source: + text = source.read() + match = re.search(r"^__version__ = ['\"]([^'\"]*)['\"]", text) + if not match: + msg = "Unable to find version number in {}".format(filename) + raise RuntimeError(msg) + version = match.group(1) + return version + +def load_rst(filename='docs/source/guide_content.rst'): + "Purge refs directives from restructured text" + with open(filename) as source: + text = source.read() + doc = re.sub(r':\w+:`~?([a-zA-Z._()]+)`', r'*\1*', text) + return doc + +setup( + name="funcsigs", + version=load_version(), + packages=['funcsigs'], + zip_safe=False, + author="Aaron Iles", + author_email="aaron.iles@gmail.com", + url="http://funcsigs.readthedocs.org", + description="", + long_description=open('README.rst').read(), + # long_description=load_rst(), + license="ASL", + install_requires = [], + classifiers = [ + 'Development Status :: 1 - Planning', + 'Intended Audience :: Developers', + 'License :: OSI Approved :: Apache Software License', + 'Operating System :: OS Independent', + 'Programming Language :: Python', + 'Programming Language :: Python :: 2', + 'Programming Language :: Python :: 2.6', + 'Programming Language :: Python :: 2.7', + 'Programming Language :: Python :: 3', + 'Programming Language :: Python :: 3.2', + 'Programming Language :: Python :: Implementation :: CPython', + 'Programming Language :: Python :: Implementation :: PyPy', + 'Topic :: Software Development :: Libraries :: Python Modules' + ], + tests_require = [] if sys.version_info[0] > 2 else ['unittest2'], + test_suite = "tests" if sys.version_info[0] > 2 else 'unittest2.collector' +) diff --git a/tests/__init__.py b/tests/__init__.py new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/tests/__init__.py diff --git a/tests/test_funcsigs.py b/tests/test_funcsigs.py new file mode 100644 index 0000000..1cbe204 --- /dev/null +++ b/tests/test_funcsigs.py @@ -0,0 +1,19 @@ +try: + # python 2.x + import unittest2 as unittest +except ImportError: + # python 3.x + import unittest + +import doctest + +import funcsigs + + +class TestFunctionSignatures(unittest.TestCase): + + def test_has_version(self): + self.assertTrue(funcsigs.__version__) + + def test_readme(self): + doctest.testfile('../README.rst') |