## Unreleased Released YYYY-MM-DD. ### Added * TODO (or remove section if none) ### Changed * TODO (or remove section if none) ### Deprecated * TODO (or remove section if none) ### Removed * TODO (or remove section if none) ### Fixed * (Included in `arbitrary_derive` 1.2.1) Fixed bug in Derive macro around `no_std` path uses [#131](https://github.com/rust-fuzz/arbitrary/pull/131) ### Security * TODO (or remove section if none) -------------------------------------------------------------------------------- ## 1.2.3 Released 2023-01-20. ### Fixed * The `derive(Arbitrary)` will now annotate the generated `impl`s with a `#[automatically_derived]` attribute to indicate to e.g. clippy that lints should not fire for the code within the derived implementation. ## 1.2.2 Released 2023-01-03. ### Fixed * Ensured that `arbitrary` and `derive_arbitrary` versions are synced up so that they don't, e.g., emit generated code that depends on newer versions of `arbitrary` than the one currently in use. [#134](https://github.com/rust-fuzz/arbitrary/issues/134) ## 1.2.1 ### Fixed * Fixed an issue where `std::thread_local!` macro invocations in derive code were not fully prefixed, causing confusing build errors in certain situations. ## 1.2.0 Released 2022-10-20. ### Added * Support custom arbitrary implementation for fields on derive. [#129](https://github.com/rust-fuzz/arbitrary/pull/129) -------------------------------------------------------------------------------- ## 1.1.6 Released 2022-09-08. ### Fixed * Fixed a potential panic due to an off-by-one error in the `Arbitrary` implementation for `std::ops::Bound`. -------------------------------------------------------------------------------- ## 1.1.5 Released 2022-09-20. ### Added * Implemented `Arbitrary` for `std::ops::Bound`. ### Fixed * Fixed a bug where `Unstructured::int_in_range` could return out-of-range integers when generating arbitrary signed integers. -------------------------------------------------------------------------------- ## 1.1.4 Released 2022-08-29. ### Added * Implemented `Arbitrary` for `Rc` and `Arc` ### Changed * Allow overriding the error type in `arbitrary::Result` * The `Unstructured::arbitrary_loop` method will consume fewer bytes of input now. ### Fixed * Fixed a bug where `Unstructured::int_in_range` could return out-of-range integers. -------------------------------------------------------------------------------- ## 1.1.3 Released 2022-06-23. ### Fixed * Fixed some potential (but highly unlikely) name-clashes inside `derive(Arbitrary)`'s generated code. [#111](https://github.com/rust-fuzz/arbitrary/pull/111) * Fixed an edge case where `derive(Arbitrary)` for recursive types that detected an overflow would not reset the overflow detection. [#111](https://github.com/rust-fuzz/arbitrary/pull/111) -------------------------------------------------------------------------------- ## 1.1.2 Released 2022-06-16. ### Fixed * Fixed a warning inside `derive(Arbitrary)`-generated code. [#110](https://github.com/rust-fuzz/arbitrary/pull/110) -------------------------------------------------------------------------------- ## 1.1.1 Released 2022-06-14. ### Fixed * Fixed a stack overflow when using `derive(Arbitrary)` with recursive types and empty inputs. [#109](https://github.com/rust-fuzz/arbitrary/pull/109) -------------------------------------------------------------------------------- ## 1.1.0 Released 2022-02-09. ### Added * Added the `Unstructured::ratio` method to generate a boolean that is `true` at the given rate. * Added the `Unstructured::arbitrary_loop` method to call a function an arbitrary number of times. -------------------------------------------------------------------------------- ## 1.0.3 Released 2021-11-20. ### Fixed * Fixed documentation for `Unstructured::fill_bytes`. We forgot to update this way back in [#53](https://github.com/rust-fuzz/arbitrary/pull/53) when the behavior changed. -------------------------------------------------------------------------------- ## 1.0.2 Released 2021-08-25. ### Added * `Arbitrary` impls for `HashMap`s and `HashSet`s with custom `Hasher`s [#87](https://github.com/rust-fuzz/arbitrary/pull/87) -------------------------------------------------------------------------------- ## 1.0.1 Released 2021-05-20. ### Added * `Arbitrary` impls for `NonZeroX` types [#79](https://github.com/rust-fuzz/arbitrary/pull/79) * `Arbitrary` impls for all arrays using const generics [#55](https://github.com/rust-fuzz/arbitrary/pull/55) * `Arbitrary` impls for `Ipv4Addr` and `Ipv6Addr` [#84](https://github.com/rust-fuzz/arbitrary/pull/84) ### Fixed * Use fewer bytes for `Unstructured::int_in_range()` [#80](https://github.com/rust-fuzz/arbitrary/pull/80) * Use correct range for `char` generation [#83](https://github.com/rust-fuzz/arbitrary/pull/83) -------------------------------------------------------------------------------- ## 1.0.0 Released 2020-02-24. See 1.0.0-rc1 and 1.0.0-rc2 for changes since 0.4.7, which was the last main line release. -------------------------------------------------------------------------------- ## 1.0.0-rc2 Released 2021-02-09. ### Added * The `Arbitrary` trait is now implemented for `&[u8]`. [#67](https://github.com/rust-fuzz/arbitrary/pull/67) ### Changed * Rename `Unstructured#get_bytes` to `Unstructured#bytes`. [#70](https://github.com/rust-fuzz/arbitrary/pull/70) * Passing an empty slice of choices to `Unstructured#choose` returns an error. Previously it would panic. [71](https://github.com/rust-fuzz/arbitrary/pull/71) -------------------------------------------------------------------------------- ## 1.0.0-rc1 Released 2020-11-25. ### Added * The `Arbitrary` trait is now implemented for `&str`. [#63](https://github.com/rust-fuzz/arbitrary/pull/63) ### Changed * The `Arbitrary` trait now has a lifetime parameter, allowing `Arbitrary` implementations that borrow from the raw input (e.g. the new `&str` implementaton). The `derive(Arbitrary)` macro also supports deriving `Arbitrary` on types with lifetimes now. [#63](https://github.com/rust-fuzz/arbitrary/pull/63) ### Removed * The `shrink` method on the `Arbitrary` trait has been removed. We have found that, in practice, using [internal reduction](https://drmaciver.github.io/papers/reduction-via-generation-preview.pdf) via approaches like `cargo fuzz tmin`, where the raw input bytes are reduced rather than the `T: Arbitrary` type constructed from those raw bytes, has the best efficiency-to-maintenance ratio. To the best of our knowledge, no one is relying on or using the `Arbitrary::shrink` method. If you *are* using and relying on the `Arbitrary::shrink` method, please reach out by [dropping a comment here](https://github.com/rust-fuzz/arbitrary/issues/62) and explaining how you're using it and what your use case is. We'll figure out what the best solution is, including potentially adding shrinking functionality back to the `arbitrary` crate. -------------------------------------------------------------------------------- ## 0.4.7 Released 2020-10-14. ### Added * Added an optimization to avoid unnecessarily consuming bytes from the underlying data when there is only one possible choice in `Unstructured::{int_in_range, choose, etc..}`. * Added license files to the derive crate. ### Changed * The `Arbitrary` implementation for `std::time::Duration` should now be faster and produce durations with a more-uniform distribution of nanoseconds. -------------------------------------------------------------------------------- ## 0.4.6 Released 2020-08-22. ### Added * Added the `Unstructured::peek_bytes` method. ### Changed * Test case reduction via `cargo fuzz tmin` should be much more effective at reducing the sizes of collections now. (See [#53](https://github.com/rust-fuzz/arbitrary/pull/53) and the commit messages for details.) * Fuzzing with mutation-based fuzzers (like libFuzzer) should be more efficient now. (See [#53](https://github.com/rust-fuzz/arbitrary/pull/53) and the commit messages for details) -------------------------------------------------------------------------------- ## 0.4.5 Released 2020-06-18. ### Added * Implement `Arbitrary` for zero length arrays. * Implement `Arbitrary` for `Range` and `RangeInclusive`. -------------------------------------------------------------------------------- ## 0.4.4 Released 2020-04-29. ### Fixed * Fixed the custom derive for enums when used via its full path (like `#[derive(arbitrary::Arbitrary)]` rather than like `#[derive(Arbitrary)]`). ## 0.4.3 Released 2020-04-28. ### Fixed * Fixed the custom derive when used via its full path (like `#[derive(arbitrary::Arbitrary)]` rather than like `#[derive(Arbitrary)]`). -------------------------------------------------------------------------------- ## 0.4.2 Released 2020-04-17. ### Changed * We forgot to release a new version of the `derive_arbitrary` crate last release. This release fixes that and so the `synstructure` dependency is finally actually removed in the cargo releases. -------------------------------------------------------------------------------- ## 0.4.1 Released 2020-03-18. ### Removed * Removed an internal dependency on the `synstructure` crate when the `derive` feature is enabled. This should not have any visible downstream effects other than faster build times! -------------------------------------------------------------------------------- ## 0.4.0 Released 2020-01-22. This is technically a breaking change, but we expect that nearly everyone should be able to upgrade without any compilation errors. The only exception is if you were implementing the `Arbitrary::size_hint` method by hand. If so, see the "changed" section below and the [API docs for `Arbitrary::shrink`](https://docs.rs/arbitrary/0.4.0/arbitrary/trait.Arbitrary.html#method.size_hint) for details. ### Added * Added [the `arbitary::size_hint::recursion_guard` helper function][recursion_guard] for guarding against infinite recursion in `size_hint` implementations for recursive types. ### Changed * The `Arbitrary::size_hint` signature now takes a `depth: usize` parameter. This should be passed along unmodified to any nested calls of other `size_hint` methods. If you're implementing `size_hint` for a recursive type (like a linked list or tree) or a generic type with type parameters, you should use [the new `arbitrary::size_hint::recursion_guard` helper function][recursion_guard]. ### Fixed * Fixed infinite recursion in generated `size_hint` implementations from `#[derive(Arbitrary)]` for recursive types. [recursion_guard]: https://docs.rs/arbitrary/0.4.0/arbitrary/size_hint/fn.recursion_guard.html -------------------------------------------------------------------------------- ## 0.3.2 Released 2020-01-16. ### Changed * Updated the custom derive's dependencies. -------------------------------------------------------------------------------- ## 0.3.2 Released 2020-01-15. ### Fixed * Fixed an over-eager assertion condition in `Unstructured::int_in_range` that would incorrectly trigger when given valid ranges of length one. -------------------------------------------------------------------------------- ## 0.3.1 Released 2020-01-14. ### Fixed * Fixed some links and version numbers in README. -------------------------------------------------------------------------------- ## 0.3.0 Released 2020-01-14. ### Added * Added the `"derive"` cargo feature, to enable `#[derive(Arbitrary)]` for custom types. Enabling this feature re-exports functionality from the `derive_arbitrary` crate. * The custom derive for `Arbitrary` implements the shrink method for you now. * All implementations of `Arbitrary` for `std` types implement shrinking now. * Added the `Arbitrary::arbitrary_take_rest` method allows an `Arbitrary` implementation to consume all of the rest of the remaining raw input. It has a default implementation that forwards to `Arbitrary::arbitrary` and the custom derive creates a smart implementation for your custom types. * Added the `Arbitrary::size_hint` method for hinting how many raw bytes an implementation needs to construct itself. This has a default implementation, but the custom derive creates a smart implementation for your custom types. * Added the `Unstructured::choose` method to choose one thing among a set of choices. * Added the `Unstructured::arbitrary_len` method to get an arbitrary length for a collection of some arbitrary type. * Added the `Unstructured::arbitrary_iter` method to create an iterator of arbitrary instance of some type. ### Changed * The `Arbitrary` trait was simplified a bit. * `Unstructured` is a concrete type now, not a trait. * Switched to Rust 2018 edition. ### Removed * `RingBuffer` and `FiniteBuffer` are removed. Use `Unstructured` instead. ### Fixed * Better `Arbitrary` implementation for `char`. * Better `Arbitrary` implementation for `String`. -------------------------------------------------------------------------------- ## 0.2.0 -------------------------------------------------------------------------------- ## 0.1.0