diff options
Diffstat (limited to 'man')
-rw-r--r-- | man/extlinux.1 | 73 | ||||
-rw-r--r-- | man/gethostip.1 | 45 | ||||
-rw-r--r-- | man/isohybrid.1 | 64 | ||||
-rw-r--r-- | man/lss16toppm.1 | 27 | ||||
-rw-r--r-- | man/memdiskfind.1 | 10 | ||||
-rw-r--r-- | man/ppmtolss16.1 | 64 | ||||
-rw-r--r-- | man/syslinux.1 | 387 | ||||
-rw-r--r-- | man/syslinux2ansi.1 | 41 |
8 files changed, 711 insertions, 0 deletions
diff --git a/man/extlinux.1 b/man/extlinux.1 new file mode 100644 index 0000000..5daa4e5 --- /dev/null +++ b/man/extlinux.1 @@ -0,0 +1,73 @@ +.TH extlinux "1" "18 December 2007" "SYSLINUX for ext2/ext3 filesystem" +.SH NAME +extlinux \- install the \s-1SYSLINUX\s+1 bootloader on a ext2/ext3 filesystem +.SH SYNOPSIS +.B extlinux +[\fIoptions\fP] \fIdirectory\fP +.SH DESCRIPTION +\fBEXTLINUX\fP is a new syslinux derivative, which boots from a Linux ext2/ext3 +filesystem. It works the same way as \fBSYSLINUX\fP, with a few slight modifications. +It is intended to simplify first-time installation of Linux, and for creation of +rescue and other special-purpose boot disks. +.PP +The installer is designed to be run on a mounted directory. For example, if you have an +ext2 or ext3 usb key mounted on /mnt, you can run the following command: +.IP +.B extlinux --install /mnt +.SH OPTIONS +.TP +\fB\-H\fR, \fB\-\-heads\fR=# +Force the number of heads. +.TP +\fB\-i\fR, \fB\-\-install\fR +Install over the current bootsector. +.TP +\fB\-O\fR, \fB\-\-clear\-once\fR +Clear the boot-once command. +.TP +\fB\-o\fR, \fB\-\-once\fR=\fIcommand\fR +Execute a command once upon boot. +.TP +\fB\-M\fR, \fB\-\-menu\-save\fR=\fIlabel\fR +Set the label to select as default on the next boot +.TP +\fB\-r\fR, \fB\-\-raid\fR +Fall back to the next device on boot failure. +.TP +\fB\-\-reset\-adv\fR +Reset auxiliary data. +.TP +\fB\-S\fR, \fB\-\-sectors\fR=\fI#\fR +Force the number of sectors per track. +.TP +\fB\-U\fR, \fB\-\-update\fR +Updates a previous \fBEXTLINUX\fP installation. +.TP +\fB\-z\fR, \fB\-\-zip\fR +Force zipdrive geometry (-H 64 -S 32). +.TP +\fB\-\-device\fR=\fIdevicename\fR +Override the automatic detection of device names. This option is +intended for special environments only and should not be used by +normal users. Misuse of this option can cause disk corruption and +lost data. +.SH FILES +The extlinux configuration file needs to be named syslinux.cfg or +extlinux.conf and needs to be stored in the extlinux installation +directory. For more information about the contents of extlinux.conf, +see syslinux(1) manpage, section files. +.SH BUGS +I would appreciate hearing of any problems you have with \s-1SYSLINUX\s+1. I +would also like to hear from you if you have successfully used \s-1SYSLINUX\s+1, +especially if you are using it for a distribution. +.PP +If you are reporting problems, please include all possible information +about your system and your BIOS; the vast majority of all problems +reported turn out to be BIOS or hardware bugs, and I need as much +information as possible in order to diagnose the problems. +.PP +There is a mailing list for discussion among \s-1SYSLINUX\s+1 users and for +announcements of new and test versions. To join, send a message to +majordomo@linux.kernel.org with the line: +.SH SEE ALSO +.BR syslinux (1) diff --git a/man/gethostip.1 b/man/gethostip.1 new file mode 100644 index 0000000..02081f1 --- /dev/null +++ b/man/gethostip.1 @@ -0,0 +1,45 @@ +.TH "GETHOSTIP" "1" +.SH "NAME" +gethostip \(em convert an IP address into various formats +.SH "SYNOPSIS" +.PP +\fBgethostip\fR [\fB-dxnf\fP] [\fB\fIHOSTNAME|IP\fR\fP] +.SH "DESCRIPTION" +.PP +This manual page documents briefly the +\fBgethostip\fR command. +.PP +The \fBgethostip\fR utility converts the given hostname or +IP address into a variety formats. It is provided by the syslinux +package to make it easier to calculate the appropriate names for +pxelinux configuration files. These filenames can be the complete +hexadecimal representation for a given IP address, or a partial +hexadecimal representation to match a range of IP addresses. + +.SH "OPTIONS" +.PP +A summary of options is included below. +.IP "\fB-d\fP" 10 +Output the IP address in decimal format. +.IP "\fB-x\fP" 10 +Output the IP address in hexadecimal format. +.IP "\fB-n\fP" 10 +Output the host's canonical name. +.IP "\fB-f\fP" 10 +Full output. Outputs the IP address in all supported formats. +Same as \fB-xdn\fP. + +.SH "SEE ALSO" +.PP +\fBsyslinux\fR(1) + +.PP +More details can be found in the pxelinux documentation, which +can be found in +\fB/usr/share/doc/syslinux/pxelinux.doc.gz\fP on +\fBDebian GNU/Linux\fP systems. + +.SH "AUTHOR" +.PP +This manual page was compiled by dann frazier <dannf@debian.org> for +the \fBDebian GNU/Linux\fP system (but may be used by others). diff --git a/man/isohybrid.1 b/man/isohybrid.1 new file mode 100644 index 0000000..549011b --- /dev/null +++ b/man/isohybrid.1 @@ -0,0 +1,64 @@ +.TH isohybrid 1 "17 Jan 2014" "isohybrid" +.SH "NAME" +isohybrid \(em Post-process an ISO 9660 image for booting as a hard disk. +.SH "SYNOPSIS" +.B isohybrid +[\fBOPTIONS\fP] +.I <boot.iso> +.SH "DESCRIPTION" +.PP +The \fBisohybrid\fR utility modifies an ISO 9660 image generated with +mkisofs, genisoimage, or compatible utilities, to be bootable as a CD-ROM or +as a hard disk. +.SH "OPTIONS" +.TP +\fB-h\fR \fI<X>\fR\fN +.br +Number of geometry heads (default 64) +.TP +\fB-s\fR \fI<X>\fR +.br +Number of geometry sectors (default 32) +.TP +\fB-e\fR \fI<X>\fR, \fB--entry\fR \fI<X>\fR +Specify parititon entry number (1-4) +.TP +\fB-o\fR \fI<X>\fR, \fB--offset\fR \fI<X>\fR +.br +Specify partition offset (default 0) +.TP +\fB-t\fR \fI<X>\fR, \fB--type\fR \fI<X>\fR +.br +Specify partition type (default 0x17) +.TP +\fB-i\fR \fI<X>\fR, \fB--id\fR \fI<X>\fR +.br +Specify MBR ID (default random) +.TP +\fB-u\fR, \fB--uefi\fB +Build EFI bootable image +.TP +\fB-m\fR, \fB--mac\fB +Add Apple File Protocol partition table support +.TP +\fB--forcehd0\fR +Assume we are laoded as disk ID 0 +.TP +\fB--ctrlhd0\fR +Assume disk ID 0 if the Ctrl key is pressed +.TP +\fB--partok\fR +Allow booting from within a partition +.TP +\fB-?\fR, \fB--help\fR +Display help +.TP +\fB-v\fR, \fB--verbose\fR +Display verbose output +.TP +\fB-V\fR, \fB--version\fR +Display version information + +.SH "SEE ALSO" +.PP +\fBmkisofs\fR(1) diff --git a/man/lss16toppm.1 b/man/lss16toppm.1 new file mode 100644 index 0000000..90447b9 --- /dev/null +++ b/man/lss16toppm.1 @@ -0,0 +1,27 @@ +.TH "LSS16TOPPM" "1" +.SH "NAME" +lss16toppm \(em Convert an LSS-16 image to PPM +.SH "SYNOPSIS" +.PP +\fBlss16toppm\fR [\fB-map\fP] [< file.lss] [> file.ppm] +.SH "DESCRIPTION" +.PP +This manual page documents briefly the \fBlss16toppm\fR command. + +.PP +The \fBlss16toppm\fR utility converts an LSS-16 image to a +PPM image. + +.SH "OPTIONS" +.PP +A summary of options is included below. +.IP "\fB-map\fP" 10 +Output the color map to standard error. +.SH "SEE ALSO" +.PP +\fBppmtolss16\fR(1) + +.SH "AUTHOR" +.PP +This manual page was compiled by dann frazier <dannf@debian.org> for +the \fBDebian GNU/Linux\fP system (but may be used by others). diff --git a/man/memdiskfind.1 b/man/memdiskfind.1 new file mode 100644 index 0000000..f0d677c --- /dev/null +++ b/man/memdiskfind.1 @@ -0,0 +1,10 @@ +.TH memdiskfind 1 "17 Jan 2014" "memdiskfind" +.SH "NAME" +memdiskfind \(em Simple utility to find a resident \fBmemdisk\fR instance. +.SH "SYNOPSIS" +.B memdiskfind +.SH "DESCRIPTION" +.PP +The \fBmemdiskfind\fR utility searches memory for a \fBmemdisk\fR instance, +and, if found, outputs the parameters needed to use the \fphram\fR driver in +Linux to map it. diff --git a/man/ppmtolss16.1 b/man/ppmtolss16.1 new file mode 100644 index 0000000..954e94b --- /dev/null +++ b/man/ppmtolss16.1 @@ -0,0 +1,64 @@ +.TH "PPMTOLSS16" "1" +.SH "NAME" +ppmtolss16 \(em Convert a PPM to an LSS16 image +.SH "SYNOPSIS" +.PP +\fBppmtolss16\fR [ \fB \fI#rrggbb\fR=\fIi\fR \fP \&...] [< input.ppm] [> output.rle] +.SH "DESCRIPTION" +.PP +This manual page documents briefly the \fBppmtolss16\fR command. + +.PP +The \fBppmtolss16\fR program converts a "raw" PPM file with +max 16 colors to a simple RLE-based format: + +.PP +\fBsimple RLE-based format\fR +.TS +tab(); +l l. +unint32 0x1413f3dmagic (littleendian) +unint16 xsizelittleendian +unint15 ysizelittleendian +16 x unint8 r,g,bcolor map +.TE +.PP +Color map is in 6-bit format (each byte is 0..63) +.PP +Then, a sequence of nybbles: +.PP +N ... if N is != previous pixel, one pixel of color N, otherwise +run sequence follows ... + +.PP +M ... if M > 0 then run length is M+1, otherwise run sequence is +encoded in two nybbles, littleendian, +17 + +.PP +The nybble sequences are on a per-row basis, runs may not extend across +rows and odd-nybble rows are zero-padded. + +.PP +At the start of a row, the "previous pixel" is assumed to be zero. + +.SH "OPTIONS" +.PP +A summary of options is included below. +.IP "\fB\fI#rrggbb\fR=\fIi\fR\fP" 10 +Specify that the color #rrggbb (hex) should be assigned index +i (decimal). + +.SH "BUG" +.PP +This program cannot handle comments in the header, nor "plain" ppm +format. + +.SH "SEE ALSO" +.PP +\fBppmtolss16\fR(1) + +.SH "AUTHOR" +.PP +This manual page was compiled by dann frazier <dannf@debian.org> for +the \fBDebian GNU/Linux\fP system (but may be used by others). Most of the content +was written by H. Peter Anvin. diff --git a/man/syslinux.1 b/man/syslinux.1 new file mode 100644 index 0000000..adcaf94 --- /dev/null +++ b/man/syslinux.1 @@ -0,0 +1,387 @@ +.TH SYSLINUX 1 "19 July 2010" "SYSLINUX" +.SH NAME +syslinux \- install the \s-1SYSLINUX\s+1 bootloader on a FAT filesystem +.SH SYNOPSIS +.B syslinux +[\fBOPTIONS\fP] +.I device +.SH DESCRIPTION +\fBSyslinux\fP is a boot loader for the Linux operating system which +operates off an MS-DOS/Windows FAT filesystem. It is intended to +simplify first-time installation of Linux, and for creation of rescue +and other special-purpose boot disks. +.PP +In order to create a bootable Linux floppy using \fBSyslinux\fP, prepare a +normal MS-DOS formatted floppy. Copy one or more Linux kernel files to +it, then execute the command: +.IP +.B syslinux \-\-install /dev/fd0 +.PP +This will alter the boot sector on the disk and copy a file named +.I ldlinux.sys +into its root directory. +.PP +On boot time, by default, the kernel will be loaded from the image named +LINUX on the boot floppy. This default can be changed, see the section +on the \fBsyslinux\fP configuration file. +.PP +If the Shift or Alt keys are held down during boot, or the Caps or Scroll +locks are set, \fBsyslinux\fP will display a +.BR lilo (8) +-style "boot:" prompt. The user can then type a kernel file name +followed by any kernel parameters. The \s-1SYSLINUX\s+1 bootloader +does not need to know about the kernel file in advance; all that is +required is that it is a file located in the root directory on the +disk. +.PP +\fBSyslinux\fP supports the loading of initial ramdisks (initrd) and the +bzImage kernel format. +.SH OPTIONS +.TP +\fB\-i\fP, \fB\-\-install\fP +Install \s-1SYSLINUX\s+1 on a new medium, overwriting any previously +installed bootloader. +.TP +\fB\-U\fP, \fB\-\-update\fP +Install \s-1SYSLINUX\s+1 on a new medium if and only if a version of +\s-1SYSLINUX\s+1 is already installed. +.TP +\fB\-s\fP, \fB\-\-stupid\fP +Install a "safe, slow and stupid" version of \s-1SYSLINUX\s+1. This version may +work on some very buggy BIOSes on which \s-1SYSLINUX\s+1 would otherwise fail. +If you find a machine on which the \-s option is required to make it boot +reliably, please send as much info about your machine as you can, and include +the failure mode. +.TP +\fB\-f\fP, \fB\-\-force\fP +Force install even if it appears unsafe. +.TP +\fB\-r\fP, \fB\-\-raid\fB +RAID mode. If boot fails, tell the BIOS to boot the next device in +the boot sequence (usually the next hard disk) instead of stopping +with an error message. This is useful for RAID-1 booting. +.TP +\fB\-d\fP, \fB\-\-directory\fP \fIsubdirectory\fP +Install the \s-1SYSLINUX\s+1 control files in a subdirectory with the +specified name (relative to the root directory on the device). +.TP +\fB\-t\fP, \fB\-\-offset\fP \fIoffset\fP +Indicates that the filesystem is at an offset from the base of the +device or file. +.TP +\fB\-\-once\fP \fIcommand\fP +Declare a boot command to be tried on the first boot only. +.TP +\fB\-O\fP, \fB\-\-clear-once\fP +Clear the boot-once command. +.TP +\fB\-H\fP, \fB\-\-heads\fP \fIhead-count\fP +Override the detected number of heads for the geometry. +.TP +\fB\-S\fP, \fB\-\-sectors\fP \fIsector-count\fP +Override the detected number of sectors for the geometry. +.TP +\fB\-z\fP, \fB\-\-zipdrive\fP +Assume zipdrive geometry (\fI\-\-heads 64 \-\-sectors 32). +.SH FILES +.SS "Configuration file" +All the configurable defaults in \s-1SYSLINUX\s+1 can be changed by putting a +file called +.B syslinux.cfg +in the install directory of the boot disk. This +is a text file in either UNIX or DOS format, containing one or more of +the following items (case is insensitive for keywords). +.PP +This list is out of date. +.PP +In the configuration file blank lines and comment lines beginning +with a hash mark (#) are ignored. +.TP +\fBdefault\fP \fIkernel\fP [ \fIoptions ...\fP ] +Sets the default command line. If \fBsyslinux\fP boots automatically, +it will act just as if the entries after "default" had been typed in +at the "boot:" prompt. +.IP +If no DEFAULT or UI statement is found, or the configuration file is missing +entirely, \s-1SYSLINUX\s+1 drops to the boot: prompt with an error message (if +NOESCAPE is set, it stops with a "boot failed" message; this is also the case +for PXELINUX if the configuration file is not found.) +.TP +NOTE: Until \s-1SYSLINUX\s+1 3.85, if no configuration file is present, or no +"default" entry is present in the configuration file, the default is +"linux auto". +.TP +Even earlier versions of \s-1SYSLINUX\s+1 used to automatically +append the string "auto" to whatever the user specified using +the DEFAULT command. As of version 1.54, this is no longer +true, as it caused problems when using a shell as a substitute +for "init." You may want to include this option manually. +.TP +.BI append " options ..." +Add one or more \fIoptions\fP to the kernel command line. These are added both +for automatic and manual boots. The options are added at the very beginning of +the kernel command line, usually permitting explicitly entered kernel options +to override them. This is the equivalent of the +.BR lilo (8) + "append" option. +.PP +.nf +.BI label\ label +.RS 2 +.BI kernel\ image +.BI append\ options\ ... +.RE +.fi +.RS +Indicates that if \fIlabel\fP is entered as the kernel to boot, \fBsyslinux\fP should +instead boot \fIimage\fP, and the specified "append" options should be used +instead of the ones specified in the global section of the file (before the +first "label" command.) The default for \fIimage\fP is the same as \fIlabel\fP, +and if no "append" is given the default is to use the global entry (if any). +Use "append -" to use no options at all. Up to 128 "label" entries are +permitted. +.IP +The "image" doesn't have to be a Linux kernel; it can be a boot sector (see below.) +.RE +.TP +.BI implicit\ flag_val +If \fIflag_val\fP is 0, do not load a kernel image unless it has been +explicitly named in a "label" statement. The default is 1. +.TP +.BI timeout\ timeout +Indicates how long to wait at the "boot:" prompt until booting automatically, in +units of 1/10 s. The timeout is cancelled as soon as the user types anything +on the keyboard, the assumption being that the user will complete the command +line already begun. A timeout of zero will disable the timeout completely, +this is also the default. The maximum possible timeout value is 35996; +corresponding to just below one hour. +.TP +\fBserial\fP \fIport\fP [ \fIbaudrate\fP ] +Enables a serial port to act as the console. "port" is a number (0 = /dev/ttyS0 += COM1, etc.); if "baudrate" is omitted, the baud rate defaults to 9600 bps. +The serial parameters are hardcoded to be 8 bits, no parity, 1 stop bit. +.IP +For this directive to be guaranteed to work properly, it +should be the first directive in the configuration file. +.TP +.BI font\ filename +Load a font in .psf format before displaying any output (except the copyright +line, which is output as ldlinux.sys itself is loaded.) \fBsyslinux\fP only loads +the font onto the video card; if the .psf file contains a Unicode table it is +ignored. This only works on EGA and VGA cards; hopefully it should do nothing +on others. +.TP +.BI kbdmap\ keymap +Install a simple keyboard map. The keyboard remapper used is \fIvery\fP +simplistic (it simply remaps the keycodes received from the BIOS, which means +that only the key combinations relevant in the default layout \- usually U.S. +English \- can be mapped) but should at least help people with AZERTY keyboard +layout and the locations of = and , (two special characters used heavily on the +Linux kernel command line.) +.IP +The included program +.BR keytab-lilo.pl (8) +from the +.BR lilo (8) + distribution can be used to create such keymaps. +.TP +.BI display\ filename +Displays the indicated file on the screen at boot time (before the boot: +prompt, if displayed). Please see the section below on DISPLAY files. If the +file is missing, this option is simply ignored. +.TP +.BI prompt\ flag_val +If \fIflag_val\fP is 0, display the "boot:" prompt only if the Shift or Alt key +is pressed, or Caps Lock or Scroll lock is set (this is the default). If +\fIflag_val\fP is 1, always display the "boot:" prompt. +.PP +.nf +.BI f1\ filename +.BI f2\ filename +.I ... +.BI f9\ filename +.BI f10\ filename +.BI f11\ filename +.BI f12\ filename +.fi +.RS +Displays the indicated file on the screen when a function key is pressed at the +"boot:" prompt. This can be used to implement pre-boot online help (presumably +for the kernel command line options.) +.RE +.IP +When using the serial console, press \fI<Ctrl-F><digit>\fP to get to +the help screens, e.g. \fI<Ctrl-F>2\fP to get to the f2 screen. For +f10-f12, hit \fI<Ctrl-F>A\fP, \fI<Ctrl-F>B\fP, \fI<Ctrl-F>C\fP. For +compatiblity with earlier versions, f10 can also be entered as +\fI<Ctrl-F>0\fP. +.SS "Display file format" +DISPLAY and function-key help files are text files in either DOS or UNIX +format (with or without \fI<CR>\fP). In addition, the following special codes +are interpreted: +.TP +\fI<FF>\fP = \fI<Ctrl-L>\fP = ASCII 12 +Clear the screen, home the cursor. Note that the screen is +filled with the current display color. +.TP +\fI<SI><bg><fg>\fP, \fI<SI>\fP = \fI<Ctrl-O>\fP = ASCII 15 +Set the display colors to the specified background and foreground colors, where +\fI<bg>\fP and \fI<fg>\fP are hex digits, corresponding to the standard PC +display attributes: +.IP +.nf +.ta \w'5 = dark purple 'u +0 = black 8 = dark grey +1 = dark blue 9 = bright blue +2 = dark green a = bright green +3 = dark cyan b = bright cyan +4 = dark red c = bright red +5 = dark purple d = bright purple +6 = brown e = yellow +7 = light grey f = white +.fi +.IP +Picking a bright color (8-f) for the background results in the +corresponding dark color (0-7), with the foreground flashing. +.IP +colors are not visible over the serial console. +.TP +\fI<CAN>\fPfilename\fI<newline>\fP, \fI<CAN>\fP = \fI<Ctrl-X>\fP = ASCII 24 +If a VGA display is present, enter graphics mode and display +the graphic included in the specified file. The file format +is an ad hoc format called LSS16; the included Perl program +"ppmtolss16" can be used to produce these images. This Perl +program also includes the file format specification. +.IP +The image is displayed in 640x480 16-color mode. Once in +graphics mode, the display attributes (set by \fI<SI>\fP code +sequences) work slightly differently: the background color is +ignored, and the foreground colors are the 16 colors specified +in the image file. For that reason, ppmtolss16 allows you to +specify that certain colors should be assigned to specific +color indicies. +.IP +Color indicies 0 and 7, in particular, should be chosen with +care: 0 is the background color, and 7 is the color used for +the text printed by \s-1SYSLINUX\s+1 itself. +.TP +\fI<EM>\fP, \fI<EM>\fP = \fI<Ctrl-U>\fP = ASCII 25 +If we are currently in graphics mode, return to text mode. +.TP +\fI<DLE>\fP..\fI<ETB>\fB, \fI<Ctrl-P>\fP..\fI<Ctrl-W>\fP = ASCII 16-23 +These codes can be used to select which modes to print a +certain part of the message file in. Each of these control +characters select a specific set of modes (text screen, +graphics screen, serial port) for which the output is actually +displayed: +.IP +.nf +Character Text Graph Serial +------------------------------------------------------ +<DLE> = <Ctrl-P> = ASCII 16 No No No +<DC1> = <Ctrl-Q> = ASCII 17 Yes No No +<DC2> = <Ctrl-R> = ASCII 18 No Yes No +<DC3> = <Ctrl-S> = ASCII 19 Yes Yes No +<DC4> = <Ctrl-T> = ASCII 20 No No Yes +<NAK> = <Ctrl-U> = ASCII 21 Yes No Yes +<SYN> = <Ctrl-V> = ASCII 22 No Yes Yes +<ETB> = <Ctrl-W> = ASCII 23 Yes Yes Yes +.fi +.IP +For example: +.nf +<DC1>Text mode<DC2>Graphics mode<DC4>Serial port<ETB> +.fi + ... will actually print out which mode the console is in! +.TP +\fI<SUB>\fP = \fI<Ctrl-Z>\fP = ASCII 26 +End of file (DOS convention). +.SS Other operating systems +This version of \fBsyslinux\fP supports chain loading of other operating +systems (such as MS-DOS and its derivatives, including Windows 95/98). +.PP +Chain loading requires the boot sector of the foreign operating system +to be stored in a file in the root directory of the filesystem. +Because neither Linux kernels, nor boot sector images have reliable magic +numbers, \fBsyslinux\fP will look at the file +extension. The following extensions are recognised: +.PP +.nf +.ta \w'none or other 'u +none or other Linux kernel image +BSS Boot sector (DOS superblock will be patched in) +BS Boot sector +.fi +.PP +For filenames given on the command line, \fBsyslinux\fP will search for the +file by adding extensions in the order listed above if the plain +filename is not found. Filenames in KERNEL statements must be fully +qualified. +.PP +.SS Novice protection +\fBSyslinux\fP will attempt to detect if the user is trying to boot on a 286 +or lower class machine, or a machine with less than 608K of low ("DOS") +RAM (which means the Linux boot sequence cannot complete). If so, a +message is displayed and the boot sequence aborted. Holding down the +Ctrl key while booting disables this feature. +.PP +The compile time and date of a specific \fBsyslinux\fP version can be obtained +by the DOS command "type ldlinux.sys". This is also used as the +signature for the LDLINUX.SYS file, which must match the boot sector +.PP +Any file that \fBsyslinux\fP uses can be marked hidden, system or readonly if +so is convenient; \fBsyslinux\fP ignores all file attributes. The \s-1SYSLINUX\s+1 +installed automatically sets the readonly attribute on LDLINUX.SYS. +.SS Bootable CD-ROMs +\s-1SYSLINUX\s+1 can be used to create bootdisk images for El +Torito-compatible bootable CD-ROMs. However, it appears that many +BIOSes are very buggy when it comes to booting CD-ROMs. Some users +have reported that the following steps are helpful in making a CD-ROM +that is bootable on the largest possible number of machines: +.IP \(bu +Use the -s (safe, slow and stupid) option to \s-1SYSLINUX\s+1 +.IP \(bu +Put the boot image as close to the beginning of the +ISO 9660 filesystem as possible. +.PP +A CD-ROM is so much faster than a floppy that the -s option shouldn't +matter from a speed perspective. +.PP +Of course, you probably want to use ISOLINUX instead. See the +documentation file +.BR isolinux.doc . +.SS Booting from a FAT partition on a hard disk +\s-1SYSLINUX\s+1 can boot from a FAT filesystem partition on a hard +disk (including FAT32). The installation procedure is identical to the +procedure for installing it on a floppy, and should work under either +DOS or Linux. To boot from a partition, \s-1SYSLINUX\s+1 needs to be +launched from a Master Boot Record or another boot loader, just like +DOS itself would. A sample master boot sector (\fBmbr.bin\fP) is +included with \s-1SYSLINUX\s+1. +.SH BUGS +I would appreciate hearing of any problems you have with \s-1SYSLINUX\s+1. I +would also like to hear from you if you have successfully used \s-1SYSLINUX\s+1, +especially if you are using it for a distribution. +.PP +If you are reporting problems, please include all possible information +about your system and your BIOS; the vast majority of all problems +reported turn out to be BIOS or hardware bugs, and I need as much +information as possible in order to diagnose the problems. +.PP +There is a mailing list for discussion among \s-1SYSLINUX\s+1 users and for +announcements of new and test versions. To join, send a message to +majordomo@linux.kernel.org with the line: +.PP +.B subscribe syslinux +.PP +in the body of the message. The submission address is syslinux@linux.kernel.org. +.SH SEE ALSO +.BR lilo (8), +.BR keytab-lilo.pl (8), +.BR fdisk (8), +.BR mkfs (8), +.BR superformat (1). +.SH AUTHOR +This manual page is a modified version of the original \fBsyslinux\fP +documentation by H. Peter Anvin <hpa@zytor.com>. The conversion to a manpage +was made by Arthur Korn <arthur@korn.ch>. diff --git a/man/syslinux2ansi.1 b/man/syslinux2ansi.1 new file mode 100644 index 0000000..063e357 --- /dev/null +++ b/man/syslinux2ansi.1 @@ -0,0 +1,41 @@ +.TH SYSLINUX2ANSI 1 +.SH NAME +syslinux2ansi \- converts a syslinux-format screen to pc-ansi +.SH SYNOPSIS +.B syslinux2ansi +< filename.input > filename.output +.SH DESCRIPTION +.I Syslinux2ansi +is a filter which converts a screen formatted for syslinux to one +compatible with PC ANSI. It will only read from standard in, and has +no command line options. +.SH BUGS +Help and version command line options would be useful. +.PP +The ability to put input and output filenames on the command line might +be good as well. +.SS Bug reports +I would appreciate hearing of any problems you have with SYSLINUX. I +would also like to hear from you if you have successfully used SYSLINUX, +especially if you are using it for a distribution. +.PP +If you are reporting problems, please include all possible information +about your system and your BIOS; the vast majority of all problems +reported turn out to be BIOD or hardware bugs, and I need as much +information as possible in order to diagnose the problems. +.PP +There is a mailing list for discussion among SYSLINUX users and for +announcements of new and test versions. To join, send a message to +majordomo@linux.kernel.org with the line: +.PP +.B subscribe syslinux +.PP +in the body of the message. The submission address is +syslinux@linux.kernel.org. +.SH "SEE ALSO" +.BR syslinux(1), +.BR perl(1) +.SH AUTHOR +This manual page is a quick write-up for Debian done by Kevin Kreamer +<kkreamer@etherhogz.org>, by looking over the 1 screenful of Perl that is +.B syslinux2ansi. |