1 files changed, 8 insertions, 6 deletions

diff --git a/android/mac/generated/help.h b/android/mac/generated/help.h
index 9b51bfae..2154ba77 100644
--- a/android/mac/generated/help.h
+++ b/android/mac/generated/help.h
@@ -40,7 +40,7 @@
 
 #define HELP_restorecon "usage: restorecon [-D] [-F] [-R] [-n] [-v] FILE...\n\nRestores the default security contexts for the given files.\n\n-D	Apply to /data/data too\n-F	Force reset\n-R	Recurse into directories\n-n	Don't make any changes; useful with -v to see what would change\n-v	Verbose"
 
-#define HELP_log "usage: log [-p PRI] [-t TAG] MESSAGE...\n\nLogs message to logcat.\n\n-p	Use the given priority instead of INFO:\n	d: DEBUG  e: ERROR  f: FATAL  i: INFO  v: VERBOSE  w: WARN  s: SILENT\n-t	Use the given tag instead of \"log\""
+#define HELP_log "usage: log [-p PRI] [-t TAG] [MESSAGE...]\n\nLogs message (or stdin) to logcat.\n\n-p	Use the given priority instead of INFO:\n	d: DEBUG  e: ERROR  f: FATAL  i: INFO  v: VERBOSE  w: WARN  s: SILENT\n-t	Use the given tag instead of \"log\""
 
 #define HELP_load_policy "usage: load_policy FILE\n\nLoad the specified SELinux policy file."
 
@@ -186,13 +186,13 @@
 
 #define HELP_rtcwake "usage: rtcwake [-aluv] [-d FILE] [-m MODE] [-s SECS] [-t UNIX]\n\nEnter the given sleep state until the given time.\n\n-a	RTC uses time specified in /etc/adjtime\n-d FILE	Device to use (default /dev/rtc)\n-l	RTC uses local time\n-m	Mode (--list-modes to see those supported by your kernel):\n	  standby  S1: default              mem     S3: suspend to RAM\n	  disk     S4: suspend to disk      off     S5: power off\n	  disable  Cancel current alarm     freeze  stop processes/processors\n	  no       just set wakeup time     on      just poll RTC for alarm\n	  show     just show current alarm\n-s SECS	Wake SECS seconds from now\n-t UNIX	Wake UNIX seconds from epoch\n-u	RTC uses UTC\n-v	Verbose"
 
-#define HELP_rmmod "usage: rmmod [-wf] [MODULE]\n\nUnload the module named MODULE from the Linux kernel.\n-f	Force unload of a module\n-w	Wait until the module is no longer used"
+#define HELP_rmmod "usage: rmmod [-wf] MODULE...\n\nUnload the given kernel modules.\n\n-f	Force unload of a module\n-w	Wait until the module is no longer used"
 
 #define HELP_rev "usage: rev [FILE...]\n\nOutput each line reversed, when no files are given stdin is used."
 
 #define HELP_reset "usage: reset\n\nReset the terminal."
 
-#define HELP_reboot "usage: reboot/halt/poweroff [-fn]\n\nRestart, halt or powerdown the system.\n\n-f	Don't signal init\n-n	Don't sync before stopping the system"
+#define HELP_reboot "usage: reboot/halt/poweroff [-fn] [-d DELAY]\n\nRestart, halt, or power off the system.\n\n-d	Wait DELAY before proceeding (in seconds or m/h/d suffix: -d 1.5m = 90s)\n-f	Force reboot (don't signal init, reboot directly)\n-n	Don't sync filesystems before reboot"
 
 #define HELP_realpath "usage: realpath FILE...\n\nDisplay the canonical absolute pathname"
 
@@ -256,7 +256,7 @@
 
 #define HELP_ionice "usage: ionice [-t] [-c CLASS] [-n LEVEL] [COMMAND...|-p PID]\n\nChange the I/O scheduling priority of a process. With no arguments\n(or just -p), display process' existing I/O class/priority.\n\n-c	CLASS = 1-3: 1(realtime), 2(best-effort, default), 3(when-idle)\n-n	LEVEL = 0-7: (0 is highest priority, default = 5)\n-p	Affect existing PID instead of spawning new child\n-t	Ignore failure to set I/O priority\n\nSystem default iopriority is generally -c 2 -n 4."
 
-#define HELP_insmod "usage: insmod MODULE [MODULE_OPTIONS]\n\nLoad the module named MODULE passing options if given."
+#define HELP_insmod "usage: insmod MODULE [OPTION...]\n\nLoad the module named MODULE passing options if given."
 
 #define HELP_inotifyd "usage: inotifyd PROG FILE[:MASK] ...\n\nWhen a filesystem event matching MASK occurs to a FILE, run PROG as:\n\n  PROG EVENTS FILE [DIRFILE]\n\nIf PROG is \"-\" events are sent to stdout.\n\nThis file is:\n  a  accessed    c  modified    e  metadata change  w  closed (writable)\n  r  opened      D  deleted     M  moved            0  closed (unwritable)\n  u  unmounted   o  overflow    x  unwatchable\n\nA file in this directory is:\n  m  moved in    y  moved out   n  created          d  deleted\n\nWhen x event happens for all FILEs, inotifyd exits (after waiting for PROG)."
 
@@ -362,6 +362,8 @@
 
 #define HELP_stty "usage: stty [-ag] [-F device] SETTING...\n\nGet/set terminal configuration.\n\n-F	Open device instead of stdin\n-a	Show all current settings (default differences from \"sane\")\n-g	Show all current settings usable as input to stty\n\nSpecial characters (syntax ^c or undef): intr quit erase kill eof eol eol2\nswtch start stop susp rprnt werase lnext discard\n\nControl/input/output/local settings as shown by -a, '-' prefix to disable\n\nCombo settings: cooked/raw, evenp/oddp/parity, nl, ek, sane\n\nN	set input and output speed (ispeed N or ospeed N for just one)\ncols N	set number of columns\nrows N	set number of rows\nline N	set line discipline\nmin N	set minimum chars per read\ntime N	set read timeout\nspeed	show speed only\nsize	show size only"
 
+#define HELP_strace "usage: strace [-fv] [-p PID] [-s NUM] COMMAND [ARGS...]\n\nTrace systems calls made by a process.\n\n-s	String length limit.\n-v	Dump all of large structs/arrays."
+
 #define HELP_wait "usage: wait [-n] [ID...]\n\nWait for background processes to exit, returning its exit code.\nID can be PID or job, with no IDs waits for all backgrounded processes.\n\n-n	Wait for next process to exit"
 
 #define HELP_source "usage: source FILE [ARGS...]\n\nRead FILE and execute commands. Any ARGS become positional parameters."
@@ -396,7 +398,7 @@
 
 #define HELP_more "usage: more [FILE...]\n\nView FILE(s) (or stdin) one screenfull at a time."
 
-#define HELP_modprobe "usage: modprobe [-alrqvsDb] [-d DIR] MODULE [symbol=value][...]\n\nmodprobe utility - inserts modules and dependencies.\n\n-a  Load multiple MODULEs\n-d  Load modules from DIR, option may be used multiple times\n-l  List (MODULE is a pattern)\n-r  Remove MODULE (stacks) or do autoclean\n-q  Quiet\n-v  Verbose\n-s  Log to syslog\n-D  Show dependencies\n-b  Apply blacklist to module names too"
+#define HELP_modprobe "usage: modprobe [-alrqvsDb] [-d DIR] MODULE [symbol=value][...]\n\nmodprobe utility - inserts modules and dependencies.\n\n-a  Load multiple MODULEs\n-b  Apply blacklist to module names too\n-D  Show dependencies\n-d  Load modules from DIR, option may be used multiple times\n-l  List (MODULE is a pattern)\n-q  Quiet\n-r  Remove MODULE (stacks) or do autoclean\n-s  Log to syslog\n-v  Verbose"
 
 #define HELP_mke2fs_extended "usage: mke2fs [-E stride=###] [-O option[,option]]\n\n-E stride= Set RAID stripe size (in blocks)\n-O [opts]  Specify fewer ext2 option flags (for old kernels)\n           All of these are on by default (as appropriate)\n   none         Clear default options (all but journaling)\n   dir_index    Use htree indexes for large directories\n   filetype     Store file type info in directory entry\n   has_journal  Set by -j\n   journal_dev  Set by -J device=XXX\n   sparse_super Don't allocate huge numbers of redundant superblocks"
 
@@ -542,7 +544,7 @@
 
 #define HELP_printf "usage: printf FORMAT [ARGUMENT...]\n\nFormat and print ARGUMENT(s) according to FORMAT, using C printf syntax\n(% escapes for cdeEfgGiosuxX, \\ escapes for abefnrtv0 or \\OCTAL or \\xHEX)."
 
-#define HELP_patch "usage: patch [-d DIR] [-i PATCH] [-p DEPTH] [-F FUZZ] [-Rlsu] [--dry-run] [FILE [PATCH]]\n\nApply a unified diff to one or more files.\n\n-d	Modify files in DIR\n-i	Input patch file (default=stdin)\n-l	Loose match (ignore whitespace)\n-p	Number of '/' to strip from start of file paths (default=all)\n-R	Reverse patch\n-s	Silent except for errors\n-u	Ignored (only handles \"unified\" diffs)\n--dry-run Don't change files, just confirm patch applies\n\nThis version of patch only handles unified diffs, and only modifies\na file when all hunks to that file apply. Patch prints failed hunks\nto stderr, and exits with nonzero status if any hunks fail.\n\nA file compared against /dev/null (or with a date <= the epoch) is\ncreated/deleted as appropriate."
+#define HELP_patch "usage: patch [-Rlsu] [-d DIR] [-i PATCH] [-p DEPTH] [-F FUZZ] [--dry-run] [FILE [PATCH]]\n\nApply a unified diff to one or more files.\n\n-d	Modify files in DIR\n-i	Input patch file (default=stdin)\n-l	Loose match (ignore whitespace)\n-p	Number of '/' to strip from start of file paths (default=all)\n-R	Reverse patch\n-s	Silent except for errors\n-u	Ignored (only handles \"unified\" diffs)\n--dry-run Don't change files, just confirm patch applies\n\nThis version of patch only handles unified diffs, and only modifies\na file when all hunks to that file apply. Patch prints failed hunks\nto stderr, and exits with nonzero status if any hunks fail.\n\nA file compared against /dev/null (or with a date <= the epoch) is\ncreated/deleted as appropriate."
 
 #define HELP_paste "usage: paste [-s] [-d DELIMITERS] [FILE...]\n\nMerge corresponding lines from each input file.\n\n-d	List of delimiter characters to separate fields with (default is \\t)\n-s	Sequential mode: turn each input file into one line of output"