ARM: renesas: Add R8A77980 V3H Condor board code

Add board code for the R8A77980 V3H Condor board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

4 files changed, 334 insertions, 0 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7c806eee9e..9e7d6d6490 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -645,6 +645,7 @@ dtb-$(CONFIG_RCAR_GEN3) += \
 	r8a77965-m3nulcb-u-boot.dtb \
 	r8a77965-salvator-x-u-boot.dtb \
 	r8a77970-eagle-u-boot.dtb \
+	r8a77980-condor-u-boot.dtb \
 	r8a77990-ebisu-u-boot.dtb \
 	r8a77995-draak-u-boot.dtb
 
diff --git a/arch/arm/dts/r8a77980-condor-u-boot.dts b/arch/arm/dts/r8a77980-condor-u-boot.dts
new file mode 100644
index 0000000000..1b22c7f0b9
--- /dev/null
+++ b/arch/arm/dts/r8a77980-condor-u-boot.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Condor board
+ *
+ * Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "r8a77980-condor.dts"
+#include "r8a77980-u-boot.dtsi"
+
+/ {
+	aliases {
+		spi0 = &rpc;
+	};
+};
+
+&rpc {
+	num-cs = <1>;
+	status = "okay";
+	spi-max-frequency = <50000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash0: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "s25fs512s", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/r8a77980-condor.dts b/arch/arm/dts/r8a77980-condor.dts
new file mode 100644
index 0000000000..5a7012be0d
--- /dev/null
+++ b/arch/arm/dts/r8a77980-condor.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77980.dtsi"
+
+/ {
+	model = "Renesas Condor board based on r8a77980";
+	compatible = "renesas,condor", "renesas,r8a77980";
+
+	aliases {
+		serial0 = &scif0;
+		ethernet0 = &gether;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0 0x48000000 0 0x78000000>;
+	};
+
+	d3_3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq_vin01: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ_VIN01";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	d1_8v: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&d3_3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	x1_clk: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&x1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander0: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander1: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		bgvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&vddq_vin01>;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pfc {
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data_a";
+		function = "canfd0";
+	};
+
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <3300>;
+	};
+
+	mmc_pins_uhs: mmc_uhs {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index 2d549f7bb4..c8f93c68bb 100644
--- a/arch/arm/mach-rmobile/Kconfig.64
+++ b/arch/arm/mach-rmobile/Kconfig.64
@@ -43,6 +43,12 @@ choice
 	prompt "Renesas ARM64 SoCs board select"
 	optional
 
+config TARGET_CONDOR
+	bool "Condor board"
+	imply R8A77980
+	help
+          Support for Renesas R-Car Gen3 Condor platform
+
 config TARGET_DRAAK
 	bool "Draak board"
 	imply R8A77995
@@ -88,6 +94,7 @@ endchoice
 config SYS_SOC
 	default "rmobile"
 
+source "board/renesas/condor/Kconfig"
 source "board/renesas/draak/Kconfig"
 source "board/renesas/eagle/Kconfig"
 source "board/renesas/ebisu/Kconfig"