fs: drop reiserfs

It was only included by a single board which doesn't appear to have
ever used it for any default use cases so drop the filesystem now
that isn't used by any in-tree configurations.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>

2 files changed, 0 insertions, 180 deletions

diff --git a/cmd/Kconfig b/cmd/Kconfig
index a86b570517..438c6d1c48 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -2750,15 +2750,6 @@ config MTDPARTS_DEFAULT
 	  Defines a default MTD partitioning scheme in the Linux MTD command
 	  line partitions format
 
-config CMD_REISER
-	bool "reiser - Access to reiserfs filesystems"
-	help
-	  This provides two commands which operate on a resierfs filesystem,
-	  commonly used some years ago:
-
-	    reiserls - list files
-	    reiserload - load a file
-
 config CMD_YAFFS2
 	bool "yaffs2 - Access of YAFFS2 filesystem"
 	depends on YAFFS2
diff --git a/cmd/reiser.c b/cmd/reiser.c
deleted file mode 100644
index 707167fcd5..0000000000
--- a/cmd/reiser.c
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2003 - 2004
- * Sysgo Real-Time Solutions, AG <www.elinos.com>
- * Pavel Bartusek <pba@sysgo.com>
- */
-
-/*
- * Reiserfs support
- */
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <env.h>
-#include <image.h>
-#include <linux/ctype.h>
-#include <asm/byteorder.h>
-#include <reiserfs.h>
-#include <part.h>
-
-#if !CONFIG_IS_ENABLED(DOS_PARTITION)
-#error DOS partition support must be selected
-#endif
-
-/* #define	REISER_DEBUG */
-
-#ifdef	REISER_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-int do_reiserls(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
-	char *filename = "/";
-	int dev, part;
-	struct blk_desc *dev_desc = NULL;
-	struct disk_partition info;
-
-	if (argc < 3)
-		return CMD_RET_USAGE;
-
-	part = blk_get_device_part_str(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	if (argc == 4) {
-	    filename = argv[3];
-	}
-
-	dev = dev_desc->devnum;
-	PRINTF("Using device %s %d:%d, directory: %s\n", argv[1], dev, part, filename);
-
-	reiserfs_set_blk_dev(dev_desc, &info);
-
-	if (!reiserfs_mount(info.size)) {
-		printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
-		return 1;
-	}
-
-	if (reiserfs_ls (filename)) {
-		printf ("** Error reiserfs_ls() **\n");
-		return 1;
-	};
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	reiserls,	4,	1,	do_reiserls,
-	"list files in a directory (default /)",
-	"<interface> <dev[:part]> [directory]\n"
-	"    - list files from 'dev' on 'interface' in a 'directory'"
-);
-
-/******************************************************************************
- * Reiserfs boot command intepreter. Derived from diskboot
- */
-int do_reiserload(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
-	char *filename = NULL;
-	int dev, part;
-	ulong addr = 0, filelen;
-	struct disk_partition info;
-	struct blk_desc *dev_desc = NULL;
-	unsigned long count;
-	char *addr_str;
-
-	switch (argc) {
-	case 3:
-		addr_str = env_get("loadaddr");
-		if (addr_str != NULL) {
-			addr = hextoul(addr_str, NULL);
-		} else {
-			addr = CONFIG_SYS_LOAD_ADDR;
-		}
-		filename = env_get("bootfile");
-		count = 0;
-		break;
-	case 4:
-		addr = hextoul(argv[3], NULL);
-		filename = env_get("bootfile");
-		count = 0;
-		break;
-	case 5:
-		addr = hextoul(argv[3], NULL);
-		filename = argv[4];
-		count = 0;
-		break;
-	case 6:
-		addr = hextoul(argv[3], NULL);
-		filename = argv[4];
-		count = hextoul(argv[5], NULL);
-		break;
-
-	default:
-		return CMD_RET_USAGE;
-	}
-
-	if (!filename) {
-		puts ("\n** No boot file defined **\n");
-		return 1;
-	}
-
-	part = blk_get_device_part_str(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	dev = dev_desc->devnum;
-
-	printf("Loading file \"%s\" from %s device %d%c%c\n",
-		filename, argv[1], dev,
-		part ? ':' : ' ', part ? part + '0' : ' ');
-
-	reiserfs_set_blk_dev(dev_desc, &info);
-
-	if (!reiserfs_mount(info.size)) {
-		printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
-		return 1;
-	}
-
-	filelen = reiserfs_open(filename);
-	if (filelen < 0) {
-		printf("** File not found %s **\n", filename);
-		return 1;
-	}
-	if ((count < filelen) && (count != 0)) {
-	    filelen = count;
-	}
-
-	if (reiserfs_read((char *)addr, filelen) != filelen) {
-		printf("\n** Unable to read \"%s\" from %s %d:%d **\n", filename, argv[1], dev, part);
-		return 1;
-	}
-
-	/* Loading ok, update default load address */
-	image_load_addr = addr;
-
-	printf ("\n%ld bytes read\n", filelen);
-	env_set_hex("filesize", filelen);
-
-	return filelen;
-}
-
-U_BOOT_CMD(
-	reiserload,	6,	0,	do_reiserload,
-	"load binary file from a Reiser filesystem",
-	"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
-	"    - load binary file 'filename' from 'dev' on 'interface'\n"
-	"      to address 'addr' from dos filesystem"
-);