diff options
Diffstat (limited to 'webrtc/modules/audio_coding/test/opus_test.cc')
-rw-r--r-- | webrtc/modules/audio_coding/test/opus_test.cc | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/webrtc/modules/audio_coding/test/opus_test.cc b/webrtc/modules/audio_coding/test/opus_test.cc new file mode 100644 index 0000000000..104b5e587b --- /dev/null +++ b/webrtc/modules/audio_coding/test/opus_test.cc @@ -0,0 +1,383 @@ +/* + * Copyright (c) 2013 The WebRTC project authors. All Rights Reserved. + * + * Use of this source code is governed by a BSD-style license + * that can be found in the LICENSE file in the root of the source + * tree. An additional intellectual property rights grant can be found + * in the file PATENTS. All contributing project authors may + * be found in the AUTHORS file in the root of the source tree. + */ + +#include "webrtc/modules/audio_coding/test/opus_test.h" + +#include <assert.h> + +#include <string> + +#include "testing/gtest/include/gtest/gtest.h" +#include "webrtc/common_types.h" +#include "webrtc/engine_configurations.h" +#include "webrtc/modules/audio_coding/codecs/opus/opus_interface.h" +#include "webrtc/modules/audio_coding/include/audio_coding_module_typedefs.h" +#include "webrtc/modules/audio_coding/test/TestStereo.h" +#include "webrtc/modules/audio_coding/test/utility.h" +#include "webrtc/system_wrappers/include/trace.h" +#include "webrtc/test/testsupport/fileutils.h" + +namespace webrtc { + +OpusTest::OpusTest() + : acm_receiver_(AudioCodingModule::Create(0)), + channel_a2b_(NULL), + counter_(0), + payload_type_(255), + rtp_timestamp_(0) {} + +OpusTest::~OpusTest() { + if (channel_a2b_ != NULL) { + delete channel_a2b_; + channel_a2b_ = NULL; + } + if (opus_mono_encoder_ != NULL) { + WebRtcOpus_EncoderFree(opus_mono_encoder_); + opus_mono_encoder_ = NULL; + } + if (opus_stereo_encoder_ != NULL) { + WebRtcOpus_EncoderFree(opus_stereo_encoder_); + opus_stereo_encoder_ = NULL; + } + if (opus_mono_decoder_ != NULL) { + WebRtcOpus_DecoderFree(opus_mono_decoder_); + opus_mono_decoder_ = NULL; + } + if (opus_stereo_decoder_ != NULL) { + WebRtcOpus_DecoderFree(opus_stereo_decoder_); + opus_stereo_decoder_ = NULL; + } +} + +void OpusTest::Perform() { +#ifndef WEBRTC_CODEC_OPUS + // Opus isn't defined, exit. + return; +#else + uint16_t frequency_hz; + size_t audio_channels; + int16_t test_cntr = 0; + + // Open both mono and stereo test files in 32 kHz. + const std::string file_name_stereo = + webrtc::test::ResourcePath("audio_coding/teststereo32kHz", "pcm"); + const std::string file_name_mono = + webrtc::test::ResourcePath("audio_coding/testfile32kHz", "pcm"); + frequency_hz = 32000; + in_file_stereo_.Open(file_name_stereo, frequency_hz, "rb"); + in_file_stereo_.ReadStereo(true); + in_file_mono_.Open(file_name_mono, frequency_hz, "rb"); + in_file_mono_.ReadStereo(false); + + // Create Opus encoders for mono and stereo. + ASSERT_GT(WebRtcOpus_EncoderCreate(&opus_mono_encoder_, 1, 0), -1); + ASSERT_GT(WebRtcOpus_EncoderCreate(&opus_stereo_encoder_, 2, 1), -1); + + // Create Opus decoders for mono and stereo for stand-alone testing of Opus. + ASSERT_GT(WebRtcOpus_DecoderCreate(&opus_mono_decoder_, 1), -1); + ASSERT_GT(WebRtcOpus_DecoderCreate(&opus_stereo_decoder_, 2), -1); + WebRtcOpus_DecoderInit(opus_mono_decoder_); + WebRtcOpus_DecoderInit(opus_stereo_decoder_); + + ASSERT_TRUE(acm_receiver_.get() != NULL); + EXPECT_EQ(0, acm_receiver_->InitializeReceiver()); + + // Register Opus stereo as receiving codec. + CodecInst opus_codec_param; + int codec_id = acm_receiver_->Codec("opus", 48000, 2); + EXPECT_EQ(0, acm_receiver_->Codec(codec_id, &opus_codec_param)); + payload_type_ = opus_codec_param.pltype; + EXPECT_EQ(0, acm_receiver_->RegisterReceiveCodec(opus_codec_param)); + + // Create and connect the channel. + channel_a2b_ = new TestPackStereo; + channel_a2b_->RegisterReceiverACM(acm_receiver_.get()); + + // + // Test Stereo. + // + + channel_a2b_->set_codec_mode(kStereo); + audio_channels = 2; + test_cntr++; + OpenOutFile(test_cntr); + + // Run Opus with 2.5 ms frame size. + Run(channel_a2b_, audio_channels, 64000, 120); + + // Run Opus with 5 ms frame size. + Run(channel_a2b_, audio_channels, 64000, 240); + + // Run Opus with 10 ms frame size. + Run(channel_a2b_, audio_channels, 64000, 480); + + // Run Opus with 20 ms frame size. + Run(channel_a2b_, audio_channels, 64000, 960); + + // Run Opus with 40 ms frame size. + Run(channel_a2b_, audio_channels, 64000, 1920); + + // Run Opus with 60 ms frame size. + Run(channel_a2b_, audio_channels, 64000, 2880); + + out_file_.Close(); + out_file_standalone_.Close(); + + // + // Test Opus stereo with packet-losses. + // + + test_cntr++; + OpenOutFile(test_cntr); + + // Run Opus with 20 ms frame size, 1% packet loss. + Run(channel_a2b_, audio_channels, 64000, 960, 1); + + // Run Opus with 20 ms frame size, 5% packet loss. + Run(channel_a2b_, audio_channels, 64000, 960, 5); + + // Run Opus with 20 ms frame size, 10% packet loss. + Run(channel_a2b_, audio_channels, 64000, 960, 10); + + out_file_.Close(); + out_file_standalone_.Close(); + + // + // Test Mono. + // + channel_a2b_->set_codec_mode(kMono); + audio_channels = 1; + test_cntr++; + OpenOutFile(test_cntr); + + // Register Opus mono as receiving codec. + opus_codec_param.channels = 1; + EXPECT_EQ(0, acm_receiver_->RegisterReceiveCodec(opus_codec_param)); + + // Run Opus with 2.5 ms frame size. + Run(channel_a2b_, audio_channels, 32000, 120); + + // Run Opus with 5 ms frame size. + Run(channel_a2b_, audio_channels, 32000, 240); + + // Run Opus with 10 ms frame size. + Run(channel_a2b_, audio_channels, 32000, 480); + + // Run Opus with 20 ms frame size. + Run(channel_a2b_, audio_channels, 32000, 960); + + // Run Opus with 40 ms frame size. + Run(channel_a2b_, audio_channels, 32000, 1920); + + // Run Opus with 60 ms frame size. + Run(channel_a2b_, audio_channels, 32000, 2880); + + out_file_.Close(); + out_file_standalone_.Close(); + + // + // Test Opus mono with packet-losses. + // + test_cntr++; + OpenOutFile(test_cntr); + + // Run Opus with 20 ms frame size, 1% packet loss. + Run(channel_a2b_, audio_channels, 64000, 960, 1); + + // Run Opus with 20 ms frame size, 5% packet loss. + Run(channel_a2b_, audio_channels, 64000, 960, 5); + + // Run Opus with 20 ms frame size, 10% packet loss. + Run(channel_a2b_, audio_channels, 64000, 960, 10); + + // Close the files. + in_file_stereo_.Close(); + in_file_mono_.Close(); + out_file_.Close(); + out_file_standalone_.Close(); +#endif +} + +void OpusTest::Run(TestPackStereo* channel, size_t channels, int bitrate, + size_t frame_length, int percent_loss) { + AudioFrame audio_frame; + int32_t out_freq_hz_b = out_file_.SamplingFrequency(); + const size_t kBufferSizeSamples = 480 * 12 * 2; // 120 ms stereo audio. + int16_t audio[kBufferSizeSamples]; + int16_t out_audio[kBufferSizeSamples]; + int16_t audio_type; + size_t written_samples = 0; + size_t read_samples = 0; + size_t decoded_samples = 0; + bool first_packet = true; + uint32_t start_time_stamp = 0; + + channel->reset_payload_size(); + counter_ = 0; + + // Set encoder rate. + EXPECT_EQ(0, WebRtcOpus_SetBitRate(opus_mono_encoder_, bitrate)); + EXPECT_EQ(0, WebRtcOpus_SetBitRate(opus_stereo_encoder_, bitrate)); + +#if defined(WEBRTC_ANDROID) || defined(WEBRTC_IOS) || defined(WEBRTC_ARCH_ARM) + // If we are on Android, iOS and/or ARM, use a lower complexity setting as + // default. + const int kOpusComplexity5 = 5; + EXPECT_EQ(0, WebRtcOpus_SetComplexity(opus_mono_encoder_, kOpusComplexity5)); + EXPECT_EQ(0, WebRtcOpus_SetComplexity(opus_stereo_encoder_, + kOpusComplexity5)); +#endif + + // Fast-forward 1 second (100 blocks) since the files start with silence. + in_file_stereo_.FastForward(100); + in_file_mono_.FastForward(100); + + // Limit the runtime to 1000 blocks of 10 ms each. + for (size_t audio_length = 0; audio_length < 1000; audio_length += 10) { + bool lost_packet = false; + + // Get 10 msec of audio. + if (channels == 1) { + if (in_file_mono_.EndOfFile()) { + break; + } + in_file_mono_.Read10MsData(audio_frame); + } else { + if (in_file_stereo_.EndOfFile()) { + break; + } + in_file_stereo_.Read10MsData(audio_frame); + } + + // If input audio is sampled at 32 kHz, resampling to 48 kHz is required. + EXPECT_EQ(480, + resampler_.Resample10Msec(audio_frame.data_, + audio_frame.sample_rate_hz_, + 48000, + channels, + kBufferSizeSamples - written_samples, + &audio[written_samples])); + written_samples += 480 * channels; + + // Sometimes we need to loop over the audio vector to produce the right + // number of packets. + size_t loop_encode = (written_samples - read_samples) / + (channels * frame_length); + + if (loop_encode > 0) { + const size_t kMaxBytes = 1000; // Maximum number of bytes for one packet. + size_t bitstream_len_byte; + uint8_t bitstream[kMaxBytes]; + for (size_t i = 0; i < loop_encode; i++) { + int bitstream_len_byte_int = WebRtcOpus_Encode( + (channels == 1) ? opus_mono_encoder_ : opus_stereo_encoder_, + &audio[read_samples], frame_length, kMaxBytes, bitstream); + ASSERT_GE(bitstream_len_byte_int, 0); + bitstream_len_byte = static_cast<size_t>(bitstream_len_byte_int); + + // Simulate packet loss by setting |packet_loss_| to "true" in + // |percent_loss| percent of the loops. + // TODO(tlegrand): Move handling of loss simulation to TestPackStereo. + if (percent_loss > 0) { + if (counter_ == floor((100 / percent_loss) + 0.5)) { + counter_ = 0; + lost_packet = true; + channel->set_lost_packet(true); + } else { + lost_packet = false; + channel->set_lost_packet(false); + } + counter_++; + } + + // Run stand-alone Opus decoder, or decode PLC. + if (channels == 1) { + if (!lost_packet) { + decoded_samples += WebRtcOpus_Decode( + opus_mono_decoder_, bitstream, bitstream_len_byte, + &out_audio[decoded_samples * channels], &audio_type); + } else { + decoded_samples += WebRtcOpus_DecodePlc( + opus_mono_decoder_, &out_audio[decoded_samples * channels], 1); + } + } else { + if (!lost_packet) { + decoded_samples += WebRtcOpus_Decode( + opus_stereo_decoder_, bitstream, bitstream_len_byte, + &out_audio[decoded_samples * channels], &audio_type); + } else { + decoded_samples += WebRtcOpus_DecodePlc( + opus_stereo_decoder_, &out_audio[decoded_samples * channels], + 1); + } + } + + // Send data to the channel. "channel" will handle the loss simulation. + channel->SendData(kAudioFrameSpeech, payload_type_, rtp_timestamp_, + bitstream, bitstream_len_byte, NULL); + if (first_packet) { + first_packet = false; + start_time_stamp = rtp_timestamp_; + } + rtp_timestamp_ += static_cast<uint32_t>(frame_length); + read_samples += frame_length * channels; + } + if (read_samples == written_samples) { + read_samples = 0; + written_samples = 0; + } + } + + // Run received side of ACM. + ASSERT_EQ(0, acm_receiver_->PlayoutData10Ms(out_freq_hz_b, &audio_frame)); + + // Write output speech to file. + out_file_.Write10MsData( + audio_frame.data_, + audio_frame.samples_per_channel_ * audio_frame.num_channels_); + + // Write stand-alone speech to file. + out_file_standalone_.Write10MsData(out_audio, decoded_samples * channels); + + if (audio_frame.timestamp_ > start_time_stamp) { + // Number of channels should be the same for both stand-alone and + // ACM-decoding. + EXPECT_EQ(audio_frame.num_channels_, channels); + } + + decoded_samples = 0; + } + + if (in_file_mono_.EndOfFile()) { + in_file_mono_.Rewind(); + } + if (in_file_stereo_.EndOfFile()) { + in_file_stereo_.Rewind(); + } + // Reset in case we ended with a lost packet. + channel->set_lost_packet(false); +} + +void OpusTest::OpenOutFile(int test_number) { + std::string file_name; + std::stringstream file_stream; + file_stream << webrtc::test::OutputPath() << "opustest_out_" + << test_number << ".pcm"; + file_name = file_stream.str(); + out_file_.Open(file_name, 48000, "wb"); + file_stream.str(""); + file_name = file_stream.str(); + file_stream << webrtc::test::OutputPath() << "opusstandalone_out_" + << test_number << ".pcm"; + file_name = file_stream.str(); + out_file_standalone_.Open(file_name, 48000, "wb"); +} + +} // namespace webrtc |