aboutsummaryrefslogtreecommitdiff
path: root/wpa_supplicant/wpa_cli.c
diff options
context:
space:
mode:
authorDmitry Shmidt <dimitrysh@google.com>2015-02-25 14:36:37 -0800
committerDmitry Shmidt <dimitrysh@google.com>2015-03-10 11:04:32 -0700
commit7f65602d49069f96a7bb44da8bd79ffe8d4c6a98 (patch)
tree0f5470742861a3ea4efb80552c3f8282fb79092c /wpa_supplicant/wpa_cli.c
parent912d96b4e283c9bc0633a065901153bf74e1f911 (diff)
downloadwpa_supplicant_8-7f65602d49069f96a7bb44da8bd79ffe8d4c6a98.tar.gz
Cumulative patch from commit f51f54a007e0de1d413dee3523472d3bbeed2ecc
f51f54a nl80211: Resubscribe to nl80211 events on global nl_event socket 48ec694 Fix Linux packet socket workaround to not close the socket too easily 0d2030e Use estimated throughput to improve roaming selection 1d747e2 Add snr and est_throughput to the BSS entries a1b790e Select AP based on estimated maximum throughput ab647ff Add wpa_supplicant Makefile target libwpa_ctrl.a abae2d1 trace: Initialize alloc_list even without os_program_init() call 891dfb3 Add helper function to clear and free wpa_psk list 71d77ad Update current BSS level when signal change event occurs f1609f1 wpa_supplicant: Cancel sched_scan when stopping countermeasures abb8d08 nl80211: Add support for configuring P2P GO CTWindow 0b8bcaa P2P: Allow configuring CTWindow when working as GO c77ffc6 TDLS: Ignore extra padding in all packets 5ce6ac1 Inteworking: Add support to update the ANQP Capability List into the BSS 185ada4 HS 2.0: Add support to update the HS20 Capability List into the BSS 7fe7a3a wpa_gui: Debug enhancement 2b892d4 Add forgotten network profile parameters to config file writing 563ee18 IBSS: Add support for VHT80 configuration ada157f Make hostapd_set_freq_params() common 98479dc IBSS: Update operating frequency if joining an existing IBSS 4d9e6fb IBSS: Add fixed_freq network parameter 6f5e1b0 Use priority list instead of global for PNO 97fc2dc Allow libnl-3.0 include path be specified f92446f P2PS: Add P2PS interface info 59b416c Add optional reassoc-to-same-BSS optimization c4da67d Fix passive_scan config parameter writing 715d5c4 hs20-osu-client: Ensure NULL checks are done before dereferencing 58d405f Fix OCSP debug messages 710dfb4 OpenSSL: Fix OCSP error path bd7bb43 HTTP: Fix OCSP error path 946572c Android: Remove commented out non-Android build parameters 15ada7f Android: Remove libxml2 config defines ebe8d3f Android: Silence unused function parameter warnings dbd10da Android: Fix hs20-osu-client build on Android 5.0 a926295 HS 2.0R2: Fix permissions for SP/<fqdn> directory on Android 480994d nl80211: Allocate QCA vendor subcmds for DFS radar detected and CAC events c165cb4 Drop all hostapd STA entries on interface disabled event 106fa1e nl80211: Indicate interface-down event only for the main netdev eeb1cb2 VLAN: Clean up RTM_NEW/DELLINK processing 47e5fbd hostapd: Avoid sending client probe on removed client 3478273 Re-configure WPA2 group keys on hostapd interface re-enable f33c860 Re-enable beaconing on interface disable+enable fc99fab nl80211: Print a debug log entry on NL80211_CMD_PROBE_CLIENT failures 0d2f324 P2P: Fix send_action_in_progress clearing in corner cases 9ff8dda Add hostapd UPDATE_BEACON ctrl_iface command e0761c5 nl80211: Allocate QCA vendor subcmd for DFS CAC Start event 1db718b nl80211: Test vendor command and event 10263dc Add control interface commands for fetching wpa_config values f91a512 Add INTERWORKING_ADD_NETWORK command c612ae9 AP: Do not reply to Probe Request frames with DS Params mismatch 5b74e08 P2P: Document P2P_CONNECT-auto 99650ca Add STOP_AP control interface command 6b00512 P2P: Add event messages for P2P_CONNECT-fallback-to-GO-Neg b0e669b P2P: Fix P2P_CONNECT-auto fallback to GO Neg with group interface bf51f4f mesh: Fix remaining BLOCKED state after SAE auth failure 79ddb20 mesh: Add a monitor event on SAE authentication getting blocked dd2cbaf mesh: Add a monitor event for SAE authentication failure 0cb5f8d mesh: Fix inactivity timer for 32 bit system 11e2ddb mesh: Remove duplicated no_auto_peer update 1e52983 D-Bus: Fix network block type change 4fada12 Fix HT40 co-ex scanning issue on hostapd error path 23ed011 Fix Linux packat socket regression work around 663ae2f Don't write to wpa_supplicant.conf directly d9a9bc0 IBSS: Do not enable HT with WEP or TKIP 0d7eb43 ACS: Accept channel if any (rather than all) survey results are valid 68fa00c ACS: Allow specific channels to be preferred 6f41a25 ACS: Use weighted average for 2.4 GHz adjacent channel interference Change-Id: Ie1cabd28dcfdefafa02e81477e34badae6f7e629 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Diffstat (limited to 'wpa_supplicant/wpa_cli.c')
-rw-r--r--wpa_supplicant/wpa_cli.c18
1 files changed, 18 insertions, 0 deletions
diff --git a/wpa_supplicant/wpa_cli.c b/wpa_supplicant/wpa_cli.c
index 2f06c35a..5a0af0dc 100644
--- a/wpa_supplicant/wpa_cli.c
+++ b/wpa_supplicant/wpa_cli.c
@@ -658,6 +658,11 @@ static char ** wpa_cli_complete_set(const char *str, int pos)
return NULL;
}
+static int wpa_cli_cmd_dump(struct wpa_ctrl *ctrl, int argc, char *argv[])
+{
+ return wpa_ctrl_command(ctrl, "DUMP");
+}
+
static int wpa_cli_cmd_get(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
@@ -2309,6 +2314,13 @@ static int wpa_cli_cmd_interworking_connect(struct wpa_ctrl *ctrl, int argc,
}
+static int wpa_cli_cmd_interworking_add_network(struct wpa_ctrl *ctrl, int argc,
+ char *argv[])
+{
+ return wpa_cli_cmd(ctrl, "INTERWORKING_ADD_NETWORK", 1, argc, argv);
+}
+
+
static int wpa_cli_cmd_anqp_get(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "ANQP_GET", 2, argc, argv);
@@ -2609,6 +2621,9 @@ static struct wpa_cli_cmd wpa_cli_commands[] = {
cli_cmd_flag_none,
"= set variables (shows list of variables when run without "
"arguments)" },
+ { "dump", wpa_cli_cmd_dump, NULL,
+ cli_cmd_flag_none,
+ "= dump config variables" },
{ "get", wpa_cli_cmd_get, NULL,
cli_cmd_flag_none,
"<name> = get information" },
@@ -2997,6 +3012,9 @@ static struct wpa_cli_cmd wpa_cli_commands[] = {
{ "interworking_connect", wpa_cli_cmd_interworking_connect,
wpa_cli_complete_bss, cli_cmd_flag_none,
"<BSSID> = connect using Interworking credentials" },
+ { "interworking_add_network", wpa_cli_cmd_interworking_add_network,
+ wpa_cli_complete_bss, cli_cmd_flag_none,
+ "<BSSID> = connect using Interworking credentials" },
{ "anqp_get", wpa_cli_cmd_anqp_get, wpa_cli_complete_bss,
cli_cmd_flag_none,
"<addr> <info id>[,<info id>]... = request ANQP information" },