diff options
Diffstat (limited to 'wpa_supplicant/wpa_supplicant.conf')
-rw-r--r-- | wpa_supplicant/wpa_supplicant.conf | 58 |
1 files changed, 55 insertions, 3 deletions
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf index 4f591602..1bd43b22 100644 --- a/wpa_supplicant/wpa_supplicant.conf +++ b/wpa_supplicant/wpa_supplicant.conf @@ -907,6 +907,13 @@ fast_reauth=1 # PMF required: ieee80211w=2 and key_mgmt=WPA-EAP-SHA256 # (and similarly for WPA-PSK and WPA-WPSK-SHA256 if WPA2-Personal is used) # +# ocv: whether operating channel validation is enabled +# This is a countermeasure against multi-channel man-in-the-middle attacks. +# Enabling this automatically also enables ieee80211w, if not yet enabled. +# 0 = disabled (default) +# 1 = enabled +#ocv=1 +# # auth_alg: list of allowed IEEE 802.11 authentication algorithms # OPEN = Open System authentication (required for WPA/WPA2) # SHARED = Shared Key authentication (requires static WEP keys) @@ -987,6 +994,22 @@ fast_reauth=1 # 0: Encrypt traffic (default) # 1: Integrity only # +# macsec_replay_protect: IEEE 802.1X/MACsec replay protection +# This setting applies only when MACsec is in use, i.e., +# - macsec_policy is enabled +# - the key server has decided to enable MACsec +# 0: Replay protection disabled (default) +# 1: Replay protection enabled +# +# macsec_replay_window: IEEE 802.1X/MACsec replay protection window +# This determines a window in which replay is tolerated, to allow receipt +# of frames that have been misordered by the network. +# This setting applies only when MACsec replay protection active, i.e., +# - macsec_replay_protect is enabled +# - the key server has decided to enable MACsec +# 0: No replay window, strict check (default) +# 1..2^32-1: number of packets that could be misordered +# # macsec_port: IEEE 802.1X/MACsec port # Port component of the SCI # Range: 1-65534 (default: 1) @@ -995,9 +1018,10 @@ fast_reauth=1 # This allows to configure MACsec with a pre-shared key using a (CAK,CKN) pair. # In this mode, instances of wpa_supplicant can act as MACsec peers. The peer # with lower priority will become the key server and start distributing SAKs. -# mka_cak (CAK = Secure Connectivity Association Key) takes a 16-bytes (128 bit) -# hex-string (32 hex-digits) -# mka_ckn (CKN = CAK Name) takes a 32-bytes (256 bit) hex-string (64 hex-digits) +# mka_cak (CAK = Secure Connectivity Association Key) takes a 16-byte (128-bit) +# hex-string (32 hex-digits) or a 32-byte (256-bit) hex-string (64 hex-digits) +# mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit) hex-string +# (2..64 hex-digits) # mka_priority (Priority of MKA Actor) is in 0..255 range with 255 being # default priority # @@ -1216,12 +1240,19 @@ fast_reauth=1 # For EAP-FAST, this must be set to 0 (or left unconfigured for the # default value to be used automatically). # tls_disable_tlsv1_0=1 - disable use of TLSv1.0 +# tls_disable_tlsv1_0=0 - explicitly enable use of TLSv1.0 (this allows +# systemwide TLS policies to be overridden) # tls_disable_tlsv1_1=1 - disable use of TLSv1.1 (a workaround for AAA servers # that have issues interoperating with updated TLS version) +# tls_disable_tlsv1_1=0 - explicitly enable use of TLSv1.1 (this allows +# systemwide TLS policies to be overridden) # tls_disable_tlsv1_2=1 - disable use of TLSv1.2 (a workaround for AAA servers # that have issues interoperating with updated TLS version) +# tls_disable_tlsv1_2=0 - explicitly enable use of TLSv1.2 (this allows +# systemwide TLS policies to be overridden) # tls_disable_tlsv1_3=1 - disable use of TLSv1.3 (a workaround for AAA servers # that have issues interoperating with updated TLS version) +# tls_disable_tlsv1_3=0 - enable TLSv1.3 (experimental - disabled by default) # tls_ext_cert_check=0 - No external server certificate validation (default) # tls_ext_cert_check=1 - External server certificate validation enabled; this # requires an external program doing validation of server certificate @@ -1381,6 +1412,20 @@ fast_reauth=1 # Treated as hint by the kernel. # -1 = Do not make any changes. # 0-3 = Set AMPDU density (aka factor) to specified value. +# +# tx_stbc: Allow overriding STBC support for TX streams +# Value: 0-1, see IEEE Std 802.11-2016, 9.4.2.56.2. +# -1 = Do not make any changes (default) +# 0 = Set if not supported +# 1 = Set if supported +# +# rx_stbc: Allow overriding STBC support for RX streams +# Value: 0-3, see IEEE Std 802.11-2016, 9.4.2.56.2. +# -1 = Do not make any changes (default) +# 0 = Set if not supported +# 1 = Set for support of one spatial stream +# 2 = Set for support of one and two spatial streams +# 3 = Set for support of one, two and three spatial streams # disable_vht: Whether VHT should be disabled. # 0 = VHT enabled (if AP supports it) @@ -1396,6 +1441,13 @@ fast_reauth=1 # 2: MCS 0-9 # 3: not supported +# multi_ap_backhaul_sta: Multi-AP backhaul STA functionality +# 0 = normal STA (default) +# 1 = backhaul STA +# A backhaul STA sends the Multi-AP IE, fails to associate if the AP does not +# support Multi-AP, and sets 4-address mode if it does. Thus, the netdev can be +# added to a bridge to allow forwarding frames over this backhaul link. + ##### Fast Session Transfer (FST) support ##################################### # # The options in this section are only available when the build configuration |