diff options
Diffstat (limited to 'arch/arm64/kernel/entry.S')
| -rw-r--r-- | arch/arm64/kernel/entry.S | 166 |
1 files changed, 149 insertions, 17 deletions
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 7ed3d75f6304..3f9d78612e57 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -27,7 +27,12 @@ #include <asm/cpufeature.h> #include <asm/errno.h> #include <asm/esr.h> +#include <asm/irq.h> +#include <asm/memory.h> +#include <asm/ptrace.h> #include <asm/thread_info.h> +#include <asm/uaccess.h> +#include <asm/asm-uaccess.h> #include <asm/unistd.h> /* @@ -88,15 +93,51 @@ .if \el == 0 mrs x21, sp_el0 - get_thread_info tsk // Ensure MDSCR_EL1.SS is clear, + mov tsk, sp + and tsk, tsk, #~(THREAD_SIZE - 1) // Ensure MDSCR_EL1.SS is clear, ldr x19, [tsk, #TI_FLAGS] // since we can unmask debug disable_step_tsk x19, x20 // exceptions when scheduling. + + mov x29, xzr // fp pointed to user-space .else add x21, sp, #S_FRAME_SIZE - .endif + get_thread_info tsk + /* Save the task's original addr_limit and set USER_DS (TASK_SIZE_64) */ + ldr x20, [tsk, #TI_ADDR_LIMIT] + str x20, [sp, #S_ORIG_ADDR_LIMIT] + mov x20, #TASK_SIZE_64 + str x20, [tsk, #TI_ADDR_LIMIT] + ALTERNATIVE(nop, SET_PSTATE_UAO(0), ARM64_HAS_UAO, CONFIG_ARM64_UAO) + .endif /* \el == 0 */ mrs x22, elr_el1 mrs x23, spsr_el1 stp lr, x21, [sp, #S_LR] + +#ifdef CONFIG_ARM64_SW_TTBR0_PAN + /* + * Set the TTBR0 PAN bit in SPSR. When the exception is taken from + * EL0, there is no need to check the state of TTBR0_EL1 since + * accesses are always enabled. + * Note that the meaning of this bit differs from the ARMv8.1 PAN + * feature as all TTBR0_EL1 accesses are disabled, not just those to + * user mappings. + */ +alternative_if ARM64_HAS_PAN + b 1f // skip TTBR0 PAN +alternative_else_nop_endif + + .if \el != 0 + mrs x21, ttbr0_el1 + tst x21, #0xffff << 48 // Check for the reserved ASID + orr x23, x23, #PSR_PAN_BIT // Set the emulated PAN in the saved SPSR + b.eq 1f // TTBR0 access already disabled + and x23, x23, #~PSR_PAN_BIT // Clear the emulated PAN in the saved SPSR + .endif + + __uaccess_ttbr0_disable x21 +1: +#endif + stp x22, x23, [sp, #S_PC] /* @@ -108,6 +149,13 @@ .endif /* + * Set sp_el0 to current thread_info. + */ + .if \el == 0 + msr sp_el0, tsk + .endif + + /* * Registers that may be useful after this macro is invoked: * * x21 - aborted SP @@ -117,9 +165,51 @@ .endm .macro kernel_exit, el + .if \el != 0 + /* Restore the task's original addr_limit. */ + ldr x20, [sp, #S_ORIG_ADDR_LIMIT] + str x20, [tsk, #TI_ADDR_LIMIT] + + /* No need to restore UAO, it will be restored from SPSR_EL1 */ + .endif + ldp x21, x22, [sp, #S_PC] // load ELR, SPSR .if \el == 0 ct_user_enter + .endif + +#ifdef CONFIG_ARM64_SW_TTBR0_PAN + /* + * Restore access to TTBR0_EL1. If returning to EL0, no need for SPSR + * PAN bit checking. + */ +alternative_if ARM64_HAS_PAN + b 2f // skip TTBR0 PAN +alternative_else_nop_endif + + .if \el != 0 + tbnz x22, #22, 1f // Skip re-enabling TTBR0 access if the PSR_PAN_BIT is set + .endif + + __uaccess_ttbr0_enable x0 + + .if \el == 0 + /* + * Enable errata workarounds only if returning to user. The only + * workaround currently required for TTBR0_EL1 changes are for the + * Cavium erratum 27456 (broadcast TLBI instructions may cause I-cache + * corruption). + */ + post_ttbr0_update_workaround + .endif +1: + .if \el != 0 + and x22, x22, #~PSR_PAN_BIT // ARMv8.0 CPUs do not understand this bit + .endif +2: +#endif + + .if \el == 0 ldr x23, [sp, #S_SP] // load return stack pointer msr sp_el0, x23 #ifdef CONFIG_ARM64_ERRATUM_845719 @@ -141,6 +231,7 @@ alternative_else alternative_endif #endif .endif + msr elr_el1, x21 // set up the return data msr spsr_el1, x22 ldp x0, x1, [sp, #16 * 0] @@ -163,9 +254,41 @@ alternative_endif eret // return to kernel .endm - .macro get_thread_info, rd - mov \rd, sp - and \rd, \rd, #~(THREAD_SIZE - 1) // top of stack + .macro irq_stack_entry + mov x19, sp // preserve the original sp + + /* + * Compare sp with the current thread_info, if the top + * ~(THREAD_SIZE - 1) bits match, we are on a task stack, and + * should switch to the irq stack. + */ + and x25, x19, #~(THREAD_SIZE - 1) + cmp x25, tsk + b.ne 9998f + + this_cpu_ptr irq_stack, x25, x26 + mov x26, #IRQ_STACK_START_SP + add x26, x25, x26 + + /* switch to the irq stack */ + mov sp, x26 + + /* + * Add a dummy stack frame, this non-standard format is fixed up + * by unwind_frame() + */ + stp x29, x19, [sp, #-16]! + mov x29, sp + +9998: + .endm + + /* + * x19 should be preserved between irq_stack_entry and + * irq_stack_exit. + */ + .macro irq_stack_exit + mov sp, x19 .endm /* @@ -183,10 +306,11 @@ tsk .req x28 // current thread_info * Interrupt handling. */ .macro irq_handler - adrp x1, handle_arch_irq - ldr x1, [x1, #:lo12:handle_arch_irq] + ldr_l x1, handle_arch_irq mov x0, sp + irq_stack_entry blr x1 + irq_stack_exit .endm .text @@ -229,7 +353,7 @@ END(vectors) * Invalid mode handlers */ .macro inv_entry, el, reason, regsize = 64 - kernel_entry el, \regsize + kernel_entry \el, \regsize mov x0, sp mov x1, #\reason mrs x2, esr_el1 @@ -288,6 +412,8 @@ el1_sync: lsr x24, x1, #ESR_ELx_EC_SHIFT // exception class cmp x24, #ESR_ELx_EC_DABT_CUR // data abort in EL1 b.eq el1_da + cmp x24, #ESR_ELx_EC_IABT_CUR // instruction abort in EL1 + b.eq el1_ia cmp x24, #ESR_ELx_EC_SYS64 // configurable trap b.eq el1_undef cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception @@ -299,16 +425,22 @@ el1_sync: cmp x24, #ESR_ELx_EC_BREAKPT_CUR // debug exception in EL1 b.ge el1_dbg b el1_inv + +el1_ia: + /* + * Fall through to the Data abort case + */ el1_da: /* * Data abort handling */ - mrs x0, far_el1 + mrs x3, far_el1 enable_dbg // re-enable interrupts if they were enabled in the aborted context tbnz x23, #7, 1f // PSR_I_BIT enable_irq 1: + clear_address_tag x0, x3 mov x2, sp // struct pt_regs bl do_mem_abort @@ -361,7 +493,6 @@ el1_irq: irq_handler #ifdef CONFIG_PREEMPT - get_thread_info tsk ldr w24, [tsk, #TI_PREEMPT] // get preempt count cbnz w24, 1f // preempt count != 0 ldr x0, [tsk, #TI_FLAGS] // get flags @@ -470,7 +601,7 @@ el0_da: // enable interrupts before calling the main handler enable_dbg_and_irq ct_user_exit - bic x0, x26, #(0xff << 56) + clear_address_tag x0, x26 mov x1, x25 mov x2, sp bl do_mem_abort @@ -484,7 +615,7 @@ el0_ia: enable_dbg_and_irq ct_user_exit mov x0, x26 - orr x1, x25, #1 << 24 // use reserved ISS bit for instruction aborts + mov x1, x25 mov x2, sp bl do_mem_abort b ret_to_user @@ -549,7 +680,7 @@ el0_inv: mov x0, sp mov x1, #BAD_SYNC mov x2, x25 - bl bad_mode + bl bad_el0_sync b ret_to_user ENDPROC(el0_sync) @@ -599,6 +730,8 @@ ENTRY(cpu_switch_to) ldp x29, x9, [x8], #16 ldr lr, [x8] mov sp, x9 + and x9, x9, #~(THREAD_SIZE - 1) + msr sp_el0, x9 ret ENDPROC(cpu_switch_to) @@ -626,14 +759,14 @@ ret_fast_syscall_trace: work_pending: tbnz x1, #TIF_NEED_RESCHED, work_resched /* TIF_SIGPENDING, TIF_NOTIFY_RESUME or TIF_FOREIGN_FPSTATE case */ - ldr x2, [sp, #S_PSTATE] mov x0, sp // 'regs' - tst x2, #PSR_MODE_MASK // user mode regs? - b.ne no_work_pending // returning to kernel enable_irq // enable interrupts for do_notify_resume() bl do_notify_resume b ret_to_user work_resched: +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off // the IRQs are off here, inform the tracing code +#endif bl schedule /* @@ -645,7 +778,6 @@ ret_to_user: and x2, x1, #_TIF_WORK_MASK cbnz x2, work_pending enable_step_tsk x1, x2 -no_work_pending: kernel_exit 0 ENDPROC(ret_to_user) |