5 files changed, 39 insertions, 30 deletions
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 5313c9ea44d..d9edcc94c2a 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -237,7 +237,8 @@ config HISAX_MIC
 
 config HISAX_NETJET
 	bool "NETjet card"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+	depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+	depends on VIRT_TO_BUS
 	help
 	  This enables HiSax support for the NetJet from Traverse
 	  Technologies.
@@ -248,7 +249,8 @@ config HISAX_NETJET
 
 config HISAX_NETJET_U
 	bool "NETspider U card"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+	depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+	depends on VIRT_TO_BUS
 	help
 	  This enables HiSax support for the Netspider U interface ISDN card
 	  from Traverse Technologies.
diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
index 0c37fb2cc86..1df33c799c0 100644
--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -108,6 +108,7 @@ config TULIP_DM910X
 config DE4X5
 	tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
 	depends on (PCI || EISA)
+	depends on VIRT_TO_BUS || ALPHA || PPC || SPARC
 	select CRC32
 	---help---
 	  This is support for the DIGITAL series of PCI/EISA Ethernet cards.
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 52c05366599..ae1b77aa199 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1102,7 +1102,7 @@ static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev)
 	/* If there is no more tx desc left free then we need to
 	 * tell the kernel to stop sending us tx frames.
 	 */
-	if (unlikely(cpdma_check_free_tx_desc(priv->txchan)))
+	if (unlikely(!cpdma_check_free_tx_desc(priv->txchan)))
 		netif_stop_queue(ndev);
 
 	return NETDEV_TX_OK;
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 248d2dc765a..16c84299729 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -68,18 +68,9 @@ static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf)
 	struct cdc_ncm_ctx *ctx;
 	struct usb_driver *subdriver = ERR_PTR(-ENODEV);
 	int ret = -ENODEV;
-	u8 data_altsetting = CDC_NCM_DATA_ALTSETTING_NCM;
+	u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf);
 	struct cdc_mbim_state *info = (void *)&dev->data;
 
-	/* see if interface supports MBIM alternate setting */
-	if (intf->num_altsetting == 2) {
-		if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
-			usb_set_interface(dev->udev,
-					  intf->cur_altsetting->desc.bInterfaceNumber,
-					  CDC_NCM_COMM_ALTSETTING_MBIM);
-		data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
-	}
-
 	/* Probably NCM, defer for cdc_ncm_bind */
 	if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
 		goto err;
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 61b74a2b89a..4709fa3497c 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -55,6 +55,14 @@
 
 #define	DRIVER_VERSION				"14-Mar-2012"
 
+#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
+static bool prefer_mbim = true;
+#else
+static bool prefer_mbim;
+#endif
+module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
+
 static void cdc_ncm_txpath_bh(unsigned long param);
 static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
 static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
@@ -550,9 +558,12 @@ void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf)
 }
 EXPORT_SYMBOL_GPL(cdc_ncm_unbind);
 
-static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+/* Select the MBIM altsetting iff it is preferred and available,
+ * returning the number of the corresponding data interface altsetting
+ */
+u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret;
+	struct usb_host_interface *alt;
 
 	/* The MBIM spec defines a NCM compatible default altsetting,
 	 * which we may have matched:
@@ -568,23 +579,27 @@ static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
 	 *   endpoint descriptors, shall be constructed according to
 	 *   the rules given in section 6 (USB Device Model) of this
 	 *   specification."
-	 *
-	 * Do not bind to such interfaces, allowing cdc_mbim to handle
-	 * them
 	 */
-#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
-	if ((intf->num_altsetting == 2) &&
-	    !usb_set_interface(dev->udev,
-			       intf->cur_altsetting->desc.bInterfaceNumber,
-			       CDC_NCM_COMM_ALTSETTING_MBIM)) {
-		if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
-			return -ENODEV;
-		else
-			usb_set_interface(dev->udev,
-					  intf->cur_altsetting->desc.bInterfaceNumber,
-					  CDC_NCM_COMM_ALTSETTING_NCM);
+	if (prefer_mbim && intf->num_altsetting == 2) {
+		alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+		if (alt && cdc_ncm_comm_intf_is_mbim(alt) &&
+		    !usb_set_interface(dev->udev,
+				       intf->cur_altsetting->desc.bInterfaceNumber,
+				       CDC_NCM_COMM_ALTSETTING_MBIM))
+			return CDC_NCM_DATA_ALTSETTING_MBIM;
 	}
-#endif
+	return CDC_NCM_DATA_ALTSETTING_NCM;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting);
+
+static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+
+	/* MBIM backwards compatible function? */
+	cdc_ncm_select_altsetting(dev, intf);
+	if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
+		return -ENODEV;
 
 	/* NCM data altsetting is always 1 */
 	ret = cdc_ncm_bind_common(dev, intf, 1);