path: root/thermal/thermal-helper.cpp

/*
 * Copyright (C) 2018 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <iterator>
#include <set>
#include <sstream>
#include <thread>
#include <vector>

#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/properties.h>
#include <android-base/stringprintf.h>
#include <android-base/strings.h>
#include <android/binder_manager.h>
#include <hidl/HidlTransportSupport.h>

#include "thermal-helper.h"

namespace android {
namespace hardware {
namespace thermal {
namespace V2_0 {
namespace implementation {

constexpr std::string_view kCpuOnlineRoot("/sys/devices/system/cpu");
constexpr std::string_view kThermalSensorsRoot("/sys/devices/virtual/thermal");
constexpr std::string_view kCpuUsageFile("/proc/stat");
constexpr std::string_view kCpuOnlineFileSuffix("online");
constexpr std::string_view kCpuPresentFile("/sys/devices/system/cpu/present");
constexpr std::string_view kSensorPrefix("thermal_zone");
constexpr std::string_view kCoolingDevicePrefix("cooling_device");
constexpr std::string_view kThermalNameFile("type");
constexpr std::string_view kSensorPolicyFile("policy");
constexpr std::string_view kSensorTempSuffix("temp");
constexpr std::string_view kSensorTripPointTempZeroFile("trip_point_0_temp");
constexpr std::string_view kSensorTripPointHystZeroFile("trip_point_0_hyst");
constexpr std::string_view kUserSpaceSuffix("user_space");
constexpr std::string_view kCoolingDeviceCurStateSuffix("cur_state");
constexpr std::string_view kConfigProperty("vendor.thermal.config");
constexpr std::string_view kConfigDefaultFileName("thermal_info_config.json");

namespace {
using android::base::StringPrintf;
using android::hardware::thermal::V2_0::toString;

/*
 * Pixel don't offline CPU, so std::thread::hardware_concurrency(); should work.
 * However /sys/devices/system/cpu/present is preferred.
 * The file is expected to contain single text line with two numbers %d-%d,
 * which is a range of available cpu numbers, e.g. 0-7 would mean there
 * are 8 cores number from 0 to 7.
 * For Android systems this approach is safer than using cpufeatures, see bug
 * b/36941727.
 */
static int getNumberOfCores() {
    std::string file;
    if (!android::base::ReadFileToString(kCpuPresentFile.data(), &file)) {
        LOG(ERROR) << "Error reading Cpu present file: " << kCpuPresentFile;
        return 0;
    }
    std::vector<std::string> pieces = android::base::Split(file, "-");
    if (pieces.size() != 2) {
        LOG(ERROR) << "Error parsing Cpu present file content: " << file;
        return 0;
    }
    auto min_core = std::stoul(pieces[0]);
    auto max_core = std::stoul(pieces[1]);
    if (max_core < min_core) {
        LOG(ERROR) << "Error parsing Cpu present min and max: " << min_core << " - " << max_core;
        return 0;
    }
    return static_cast<std::size_t>(max_core - min_core + 1);
}
const int kMaxCpus = getNumberOfCores();

void parseCpuUsagesFileAndAssignUsages(hidl_vec<CpuUsage> *cpu_usages) {
    std::string data;
    if (!android::base::ReadFileToString(kCpuUsageFile.data(), &data)) {
        LOG(ERROR) << "Error reading cpu usage file: " << kCpuUsageFile;
        return;
    }

    std::istringstream stat_data(data);
    std::string line;
    while (std::getline(stat_data, line)) {
        if (line.find("cpu") == 0 && isdigit(line[3])) {
            // Split the string using spaces.
            std::vector<std::string> words = android::base::Split(line, " ");
            std::string cpu_name = words[0];
            int cpu_num = std::stoi(cpu_name.substr(3));

            if (cpu_num < kMaxCpus) {
                uint64_t user = std::stoull(words[1]);
                uint64_t nice = std::stoull(words[2]);
                uint64_t system = std::stoull(words[3]);
                uint64_t idle = std::stoull(words[4]);

                // Check if the CPU is online by reading the online file.
                std::string cpu_online_path =
                        StringPrintf("%s/%s/%s", kCpuOnlineRoot.data(), cpu_name.c_str(),
                                     kCpuOnlineFileSuffix.data());
                std::string is_online;
                if (!android::base::ReadFileToString(cpu_online_path, &is_online)) {
                    LOG(ERROR) << "Could not open Cpu online file: " << cpu_online_path;
                    if (cpu_num != 0) {
                        return;
                    }
                    // Some architecture cannot offline cpu0, so assuming it is online
                    is_online = "1";
                }
                is_online = android::base::Trim(is_online);

                (*cpu_usages)[cpu_num].active = user + nice + system;
                (*cpu_usages)[cpu_num].total = user + nice + system + idle;
                (*cpu_usages)[cpu_num].isOnline = (is_online == "1") ? true : false;
            } else {
                LOG(ERROR) << "Unexpected cpu number: " << words[0];
                return;
            }
        }
    }
}

std::map<std::string, std::string> parseThermalPathMap(std::string_view prefix) {
    std::map<std::string, std::string> path_map;
    std::unique_ptr<DIR, int (*)(DIR *)> dir(opendir(kThermalSensorsRoot.data()), closedir);
    if (!dir) {
        return path_map;
    }

    // std::filesystem is not available for vendor yet
    // see discussion: aosp/894015
    while (struct dirent *dp = readdir(dir.get())) {
        if (dp->d_type != DT_DIR) {
            continue;
        }

        if (!android::base::StartsWith(dp->d_name, prefix.data())) {
            continue;
        }

        std::string path = android::base::StringPrintf("%s/%s/%s", kThermalSensorsRoot.data(),
                                                       dp->d_name, kThermalNameFile.data());
        std::string name;
        if (!android::base::ReadFileToString(path, &name)) {
            PLOG(ERROR) << "Failed to read from " << path;
            continue;
        }

        path_map.emplace(
                android::base::Trim(name),
                android::base::StringPrintf("%s/%s", kThermalSensorsRoot.data(), dp->d_name));
    }

    return path_map;
}

}  // namespace
PowerHalService::PowerHalService()
    : power_hal_aidl_exist_(true), power_hal_aidl_(nullptr), power_hal_ext_aidl_(nullptr) {
    connect();
}

bool PowerHalService::connect() {
    std::lock_guard<std::mutex> lock(lock_);
    if (!power_hal_aidl_exist_)
        return false;

    if (power_hal_aidl_ != nullptr)
        return true;

    const std::string kInstance = std::string(IPower::descriptor) + "/default";
    ndk::SpAIBinder power_binder = ndk::SpAIBinder(AServiceManager_getService(kInstance.c_str()));
    ndk::SpAIBinder ext_power_binder;

    if (power_binder.get() == nullptr) {
        LOG(ERROR) << "Cannot get Power Hal Binder";
        power_hal_aidl_exist_ = false;
        return false;
    }

    power_hal_aidl_ = IPower::fromBinder(power_binder);

    if (power_hal_aidl_ == nullptr) {
        power_hal_aidl_exist_ = false;
        LOG(ERROR) << "Cannot get Power Hal AIDL" << kInstance.c_str();
        return false;
    }

    if (STATUS_OK != AIBinder_getExtension(power_binder.get(), ext_power_binder.getR()) ||
        ext_power_binder.get() == nullptr) {
        LOG(ERROR) << "Cannot get Power Hal Extension Binder";
        power_hal_aidl_exist_ = false;
        return false;
    }

    power_hal_ext_aidl_ = IPowerExt::fromBinder(ext_power_binder);
    if (power_hal_ext_aidl_ == nullptr) {
        LOG(ERROR) << "Cannot get Power Hal Extension AIDL";
        power_hal_aidl_exist_ = false;
    }

    return true;
}

bool PowerHalService::isModeSupported(const std::string &type, const ThrottlingSeverity &t) {
    bool isSupported = false;
    if (!isPowerHalConnected()) {
        return false;
    }
    std::string power_hint = StringPrintf("THERMAL_%s_%s", type.c_str(), toString(t).c_str());
    lock_.lock();
    if (!power_hal_ext_aidl_->isModeSupported(power_hint, &isSupported).isOk()) {
        LOG(ERROR) << "Fail to check supported mode, Hint: " << power_hint;
        power_hal_aidl_exist_ = false;
        power_hal_ext_aidl_ = nullptr;
        power_hal_aidl_ = nullptr;
        lock_.unlock();
        return false;
    }
    lock_.unlock();
    return isSupported;
}

void PowerHalService::setMode(const std::string &type, const ThrottlingSeverity &t,
                              const bool &enable) {
    if (!isPowerHalConnected()) {
        return;
    }

    std::string power_hint = StringPrintf("THERMAL_%s_%s", type.c_str(), toString(t).c_str());
    LOG(INFO) << "Send Hint " << power_hint << " Enable: " << std::boolalpha << enable;
    lock_.lock();
    if (!power_hal_ext_aidl_->setMode(power_hint, enable).isOk()) {
        LOG(ERROR) << "Fail to set mode, Hint: " << power_hint;
        power_hal_aidl_exist_ = false;
        power_hal_ext_aidl_ = nullptr;
        power_hal_aidl_ = nullptr;
        lock_.unlock();
        return;
    }
    lock_.unlock();
}

/*
 * Populate the sensor_name_to_file_map_ map by walking through the file tree,
 * reading the type file and assigning the temp file path to the map.  If we do
 * not succeed, abort.
 */
ThermalHelper::ThermalHelper(const NotificationCallback &cb)
    : thermal_watcher_(new ThermalWatcher(
              std::bind(&ThermalHelper::thermalWatcherCallbackFunc, this, std::placeholders::_1))),
      cb_(cb),
      cooling_device_info_map_(ParseCoolingDevice(
              "/vendor/etc/" +
              android::base::GetProperty(kConfigProperty.data(), kConfigDefaultFileName.data()))),
      sensor_info_map_(ParseSensorInfo(
              "/vendor/etc/" +
              android::base::GetProperty(kConfigProperty.data(), kConfigDefaultFileName.data()))) {
    for (auto const &name_status_pair : sensor_info_map_) {
        sensor_status_map_[name_status_pair.first] = {
            .severity = ThrottlingSeverity::NONE,
            .prev_hot_severity = ThrottlingSeverity::NONE,
            .prev_cold_severity = ThrottlingSeverity::NONE,
            .prev_hint_severity = ThrottlingSeverity::NONE,
        };
    }

    auto tz_map = parseThermalPathMap(kSensorPrefix.data());
    auto cdev_map = parseThermalPathMap(kCoolingDevicePrefix.data());

    is_initialized_ = initializeSensorMap(tz_map) && initializeCoolingDevices(cdev_map);
    if (!is_initialized_) {
        LOG(FATAL) << "ThermalHAL could not be initialized properly.";
    }
    std::set<std::string> monitored_sensors;
    std::transform(sensor_info_map_.cbegin(), sensor_info_map_.cend(),
                   std::inserter(monitored_sensors, monitored_sensors.begin()),
                   [](std::pair<std::string, SensorInfo> const &sensor) {
                       if (sensor.second.is_monitor)
                           return sensor.first;
                       else
                           return std::string();
                   });

    thermal_watcher_->registerFilesToWatch(monitored_sensors, initializeTrip(tz_map));

    // Need start watching after status map initialized
    is_initialized_ = thermal_watcher_->startWatchingDeviceFiles();
    if (!is_initialized_) {
        LOG(FATAL) << "ThermalHAL could not start watching thread properly.";
    }

    if (!connectToPowerHal()) {
        LOG(ERROR) << "Fail to connect to Power Hal";
    } else {
        updateSupportedPowerHints();
    }
}

bool ThermalHelper::readCoolingDevice(std::string_view cooling_device,
                                      CoolingDevice_2_0 *out) const {
    // Read the file.  If the file can't be read temp will be empty string.
    std::string data;

    if (!cooling_devices_.readThermalFile(cooling_device, &data)) {
        LOG(ERROR) << "readCoolingDevice: failed to read cooling_device: " << cooling_device;
        return false;
    }

    const CoolingType &type = cooling_device_info_map_.at(cooling_device.data());

    out->type = type;
    out->name = cooling_device.data();
    out->value = std::stoi(data);

    return true;
}

bool ThermalHelper::readTemperature(std::string_view sensor_name, Temperature_1_0 *out) const {
    // Read the file.  If the file can't be read temp will be empty string.
    std::string temp;

    if (!thermal_sensors_.readThermalFile(sensor_name, &temp)) {
        LOG(ERROR) << "readTemperature: sensor not found: " << sensor_name;
        return false;
    }

    if (temp.empty()) {
        LOG(ERROR) << "readTemperature: failed to read sensor: " << sensor_name;
        return false;
    }

    const SensorInfo &sensor_info = sensor_info_map_.at(sensor_name.data());
    TemperatureType_1_0 type =
        (static_cast<int>(sensor_info.type) > static_cast<int>(TemperatureType_1_0::SKIN))
            ? TemperatureType_1_0::UNKNOWN
            : static_cast<TemperatureType_1_0>(sensor_info.type);
    out->type = type;
    out->name = sensor_name.data();
    out->currentValue = std::stof(temp) * sensor_info.multiplier;
    out->throttlingThreshold =
        sensor_info.hot_thresholds[static_cast<size_t>(ThrottlingSeverity::SEVERE)];
    out->shutdownThreshold =
        sensor_info.hot_thresholds[static_cast<size_t>(ThrottlingSeverity::SHUTDOWN)];
    out->vrThrottlingThreshold = sensor_info.vr_threshold;

    return true;
}

bool ThermalHelper::readTemperature(
        std::string_view sensor_name, Temperature_2_0 *out,
        std::pair<ThrottlingSeverity, ThrottlingSeverity> *throtting_status) const {
    // Read the file.  If the file can't be read temp will be empty string.
    std::string temp;

    if (!thermal_sensors_.readThermalFile(sensor_name, &temp)) {
        LOG(ERROR) << "readTemperature: sensor not found: " << sensor_name;
        return false;
    }

    if (temp.empty()) {
        LOG(ERROR) << "readTemperature: failed to read sensor: " << sensor_name;
        return false;
    }

    const auto &sensor_info = sensor_info_map_.at(sensor_name.data());
    out->type = sensor_info.type;
    out->name = sensor_name.data();
    out->value = std::stof(temp) * sensor_info.multiplier;

    std::pair<ThrottlingSeverity, ThrottlingSeverity> status =
        std::make_pair(ThrottlingSeverity::NONE, ThrottlingSeverity::NONE);
    // Only update status if the thermal sensor is being monitored
    if (sensor_info.is_monitor) {
        ThrottlingSeverity prev_hot_severity, prev_cold_severity;
        {
            // reader lock, readTemperature will be called in Binder call and the watcher thread.
            std::shared_lock<std::shared_mutex> _lock(sensor_status_map_mutex_);
            prev_hot_severity = sensor_status_map_.at(sensor_name.data()).prev_hot_severity;
            prev_cold_severity = sensor_status_map_.at(sensor_name.data()).prev_cold_severity;
        }
        status = getSeverityFromThresholds(sensor_info.hot_thresholds, sensor_info.cold_thresholds,
                                           sensor_info.hot_hysteresis, sensor_info.cold_hysteresis,
                                           prev_hot_severity, prev_cold_severity, out->value);
    }
    if (throtting_status) {
        *throtting_status = status;
    }

    out->throttlingStatus = static_cast<size_t>(status.first) > static_cast<size_t>(status.second)
                                ? status.first
                                : status.second;

    return true;
}

bool ThermalHelper::readTemperatureThreshold(std::string_view sensor_name,
                                             TemperatureThreshold *out) const {
    // Read the file.  If the file can't be read temp will be empty string.
    std::string temp;
    std::string path;

    if (!sensor_info_map_.count(sensor_name.data())) {
        LOG(ERROR) << __func__ << ": sensor not found: " << sensor_name;
        return false;
    }

    const auto &sensor_info = sensor_info_map_.at(sensor_name.data());

    out->type = sensor_info.type;
    out->name = sensor_name.data();
    out->hotThrottlingThresholds = sensor_info.hot_thresholds;
    out->coldThrottlingThresholds = sensor_info.cold_thresholds;
    out->vrThrottlingThreshold = sensor_info.vr_threshold;
    return true;
}

std::pair<ThrottlingSeverity, ThrottlingSeverity> ThermalHelper::getSeverityFromThresholds(
    const ThrottlingArray &hot_thresholds, const ThrottlingArray &cold_thresholds,
    const ThrottlingArray &hot_hysteresis, const ThrottlingArray &cold_hysteresis,
    ThrottlingSeverity prev_hot_severity, ThrottlingSeverity prev_cold_severity,
    float value) const {
    ThrottlingSeverity ret_hot = ThrottlingSeverity::NONE;
    ThrottlingSeverity ret_hot_hysteresis = ThrottlingSeverity::NONE;
    ThrottlingSeverity ret_cold = ThrottlingSeverity::NONE;
    ThrottlingSeverity ret_cold_hysteresis = ThrottlingSeverity::NONE;

    // Here we want to control the iteration from high to low, and hidl_enum_range doesn't support
    // a reverse iterator yet.
    for (size_t i = static_cast<size_t>(ThrottlingSeverity::SHUTDOWN);
         i > static_cast<size_t>(ThrottlingSeverity::NONE); --i) {
        if (!std::isnan(hot_thresholds[i]) && hot_thresholds[i] <= value &&
            ret_hot == ThrottlingSeverity::NONE) {
            ret_hot = static_cast<ThrottlingSeverity>(i);
        }
        if (!std::isnan(hot_thresholds[i]) && (hot_thresholds[i] - hot_hysteresis[i]) < value &&
            ret_hot_hysteresis == ThrottlingSeverity::NONE) {
            ret_hot_hysteresis = static_cast<ThrottlingSeverity>(i);
        }
        if (!std::isnan(cold_thresholds[i]) && cold_thresholds[i] >= value &&
            ret_cold == ThrottlingSeverity::NONE) {
            ret_cold = static_cast<ThrottlingSeverity>(i);
        }
        if (!std::isnan(cold_thresholds[i]) && (cold_thresholds[i] + cold_hysteresis[i]) > value &&
            ret_cold_hysteresis == ThrottlingSeverity::NONE) {
            ret_cold_hysteresis = static_cast<ThrottlingSeverity>(i);
        }
    }
    if (static_cast<size_t>(ret_hot) < static_cast<size_t>(prev_hot_severity)) {
        ret_hot = ret_hot_hysteresis;
    }
    if (static_cast<size_t>(ret_cold) < static_cast<size_t>(prev_cold_severity)) {
        ret_cold = ret_cold_hysteresis;
    }

    return std::make_pair(ret_hot, ret_cold);
}

bool ThermalHelper::initializeSensorMap(const std::map<std::string, std::string> &path_map) {
    for (const auto &sensor_info_pair : sensor_info_map_) {
        std::string_view sensor_name = sensor_info_pair.first;
        if (!path_map.count(sensor_name.data())) {
            LOG(ERROR) << "Could not find " << sensor_name << " in sysfs";
            continue;
        }
        std::string path = android::base::StringPrintf(
                "%s/%s", path_map.at(sensor_name.data()).c_str(), kSensorTempSuffix.data());
        if (!thermal_sensors_.addThermalFile(sensor_name, path)) {
            LOG(ERROR) << "Could not add " << sensor_name << "to sensors map";
        }
    }
    if (sensor_info_map_.size() == thermal_sensors_.getNumThermalFiles()) {
        return true;
    }
    return false;
}

bool ThermalHelper::initializeCoolingDevices(const std::map<std::string, std::string> &path_map) {
    for (const auto &cooling_device_info_pair : cooling_device_info_map_) {
        std::string_view cooling_device_name = cooling_device_info_pair.first;
        if (!path_map.count(cooling_device_name.data())) {
            LOG(ERROR) << "Could not find " << cooling_device_name << " in sysfs";
            continue;
        }
        std::string path = android::base::StringPrintf(
                "%s/%s", path_map.at(cooling_device_name.data()).c_str(),
                kCoolingDeviceCurStateSuffix.data());
        if (!cooling_devices_.addThermalFile(cooling_device_name, path)) {
            LOG(ERROR) << "Could not add " << cooling_device_name << "to cooling device map";
            continue;
        }
    }

    if (cooling_device_info_map_.size() == cooling_devices_.getNumThermalFiles()) {
        return true;
    }
    return false;
}

bool ThermalHelper::initializeTrip(const std::map<std::string, std::string> &path_map) {
    for (const auto &sensor_info : sensor_info_map_) {
        if (sensor_info.second.is_monitor) {
            std::string_view sensor_name = sensor_info.first;
            std::string_view tz_path = path_map.at(sensor_name.data());
            std::string tz_policy;
            std::string path = android::base::StringPrintf("%s/%s", (tz_path.data()),
                                                           kSensorPolicyFile.data());
            if (!android::base::ReadFileToString(path, &tz_policy)) {
                LOG(ERROR) << sensor_name << " could not open tz policy file:" << path;
                return false;
            }
            // Check if thermal zone support uevent notify
            tz_policy = android::base::Trim(tz_policy);
            if (tz_policy != kUserSpaceSuffix) {
                LOG(ERROR) << sensor_name << " does not support uevent notify";
                return false;
            }

            // Update thermal zone trip point
            for (size_t i = 0; i < kThrottlingSeverityCount; ++i) {
                if (!std::isnan(sensor_info.second.hot_thresholds[i]) &&
                    !std::isnan(sensor_info.second.hot_hysteresis[i])) {
                    // Update trip_point_0_temp threshold
                    std::string threshold = std::to_string(static_cast<int>(
                            sensor_info.second.hot_thresholds[i] / sensor_info.second.multiplier));
                    path = android::base::StringPrintf("%s/%s", (tz_path.data()),
                                                       kSensorTripPointTempZeroFile.data());
                    if (!android::base::WriteStringToFile(threshold, path)) {
                        LOG(ERROR) << "fail to update " << sensor_name
                                   << " trip point: " << threshold << path;
                        return false;
                    }
                    // Update trip_point_0_hyst threshold
                    threshold = std::to_string(static_cast<int>(
                            sensor_info.second.hot_hysteresis[i] / sensor_info.second.multiplier));
                    path = android::base::StringPrintf("%s/%s", (tz_path.data()),
                                                       kSensorTripPointHystZeroFile.data());
                    if (!android::base::WriteStringToFile(threshold, path)) {
                        LOG(ERROR) << "fail to update " << sensor_name << "trip hyst" << threshold
                                   << path;
                        return false;
                    }
                    break;
                } else if (i == kThrottlingSeverityCount - 1) {
                    LOG(ERROR) << sensor_name << ":all thresholds are NAN";
                    return false;
                }
            }
        }
    }
    return true;
}
bool ThermalHelper::fillTemperatures(hidl_vec<Temperature_1_0> *temperatures) const {
    temperatures->resize(sensor_info_map_.size());
    int current_index = 0;
    for (const auto &name_info_pair : sensor_info_map_) {
        Temperature_1_0 temp;

        if (readTemperature(name_info_pair.first, &temp)) {
            (*temperatures)[current_index] = temp;
        } else {
            LOG(ERROR) << __func__
                       << ": error reading temperature for sensor: " << name_info_pair.first;
            return false;
        }
        ++current_index;
    }
    return current_index > 0;
}

bool ThermalHelper::fillCurrentTemperatures(bool filterType, TemperatureType_2_0 type,
                                            hidl_vec<Temperature_2_0> *temperatures) const {
    std::vector<Temperature_2_0> ret;
    for (const auto &name_info_pair : sensor_info_map_) {
        Temperature_2_0 temp;
        if (filterType && name_info_pair.second.type != type) {
            continue;
        }
        if (readTemperature(name_info_pair.first, &temp)) {
            ret.emplace_back(std::move(temp));
        } else {
            LOG(ERROR) << __func__
                       << ": error reading temperature for sensor: " << name_info_pair.first;
            return false;
        }
    }
    *temperatures = ret;
    return ret.size() > 0;
}

bool ThermalHelper::fillTemperatureThresholds(bool filterType, TemperatureType_2_0 type,
                                              hidl_vec<TemperatureThreshold> *thresholds) const {
    std::vector<TemperatureThreshold> ret;
    for (const auto &name_info_pair : sensor_info_map_) {
        TemperatureThreshold temp;
        if (filterType && name_info_pair.second.type != type) {
            continue;
        }
        if (readTemperatureThreshold(name_info_pair.first, &temp)) {
            ret.emplace_back(std::move(temp));
        } else {
            LOG(ERROR) << __func__ << ": error reading temperature threshold for sensor: "
                       << name_info_pair.first;
            return false;
        }
    }
    *thresholds = ret;
    return ret.size() > 0;
}

bool ThermalHelper::fillCurrentCoolingDevices(bool filterType, CoolingType type,
                                              hidl_vec<CoolingDevice_2_0> *cooling_devices) const {
    std::vector<CoolingDevice_2_0> ret;
    for (const auto &name_info_pair : cooling_device_info_map_) {
        CoolingDevice_2_0 value;
        if (filterType && name_info_pair.second != type) {
            continue;
        }
        if (readCoolingDevice(name_info_pair.first, &value)) {
            ret.emplace_back(std::move(value));
        } else {
            LOG(ERROR) << __func__ << ": error reading cooling device: " << name_info_pair.first;
            return false;
        }
    }
    *cooling_devices = ret;
    return ret.size() > 0;
}

bool ThermalHelper::fillCpuUsages(hidl_vec<CpuUsage> *cpu_usages) const {
    cpu_usages->resize(kMaxCpus);
    for (int i = 0; i < kMaxCpus; i++) {
        (*cpu_usages)[i].name = StringPrintf("cpu%d", i);
        (*cpu_usages)[i].active = 0;
        (*cpu_usages)[i].total = 0;
        (*cpu_usages)[i].isOnline = false;
    }
    parseCpuUsagesFileAndAssignUsages(cpu_usages);
    return true;
}

// This is called in the different thread context and will update sensor_status
// uevent_sensors is the set of sensors which trigger uevent from thermal core driver.
bool ThermalHelper::thermalWatcherCallbackFunc(const std::set<std::string> &uevent_sensors) {
    std::vector<Temperature_2_0> temps;
    bool thermal_triggered = false;
    for (auto &name_status_pair : sensor_status_map_) {
        Temperature_2_0 temp;
        TemperatureThreshold threshold;
        SensorStatus &sensor_status = name_status_pair.second;
        const SensorInfo &sensor_info = sensor_info_map_.at(name_status_pair.first);
        // Only send notification on whitelisted sensors
        if (!sensor_info.is_monitor) {
            continue;
        }
        // If callback is triggered by uevent, only check the sensors within uevent_sensors
        if (uevent_sensors.size() != 0 &&
            uevent_sensors.find(name_status_pair.first) == uevent_sensors.end()) {
            if (sensor_status.severity != ThrottlingSeverity::NONE) {
                thermal_triggered = true;
            }
            continue;
        }

        std::pair<ThrottlingSeverity, ThrottlingSeverity> throtting_status;
        if (!readTemperature(name_status_pair.first, &temp, &throtting_status)) {
            LOG(ERROR) << __func__
                       << ": error reading temperature for sensor: " << name_status_pair.first;
            continue;
        }
        if (!readTemperatureThreshold(name_status_pair.first, &threshold)) {
            LOG(ERROR) << __func__ << ": error reading temperature threshold for sensor: "
                       << name_status_pair.first;
            continue;
        }

        {
            // writer lock
            std::unique_lock<std::shared_mutex> _lock(sensor_status_map_mutex_);
            if (throtting_status.first != sensor_status.prev_hot_severity) {
                sensor_status.prev_hot_severity = throtting_status.first;
            }
            if (throtting_status.second != sensor_status.prev_cold_severity) {
                sensor_status.prev_cold_severity = throtting_status.second;
            }
            if (temp.throttlingStatus != sensor_status.severity) {
                temps.push_back(temp);
                sensor_status.severity = temp.throttlingStatus;
            }
        }
        if (sensor_status.severity != ThrottlingSeverity::NONE) {
            thermal_triggered = true;
            LOG(INFO) << temp.name << ": " << temp.value;
        }
    }
    if (!temps.empty() && cb_) {
        cb_(temps);
    }

    return thermal_triggered;
}

bool ThermalHelper::connectToPowerHal() {
    return power_hal_service_.connect();
}

void ThermalHelper::updateSupportedPowerHints() {
    for (auto const &name_status_pair : sensor_info_map_) {
        if (!name_status_pair.second.send_powerhint) {
            continue;
        }
        ThrottlingSeverity current_severity = ThrottlingSeverity::NONE;
        for (const auto &severity : hidl_enum_range<ThrottlingSeverity>()) {
            LOG(ERROR) << "sensor: " << name_status_pair.first
                       << " current_severity :" << toString(current_severity) << " severity "
                       << toString(severity);
            if (severity == ThrottlingSeverity::NONE) {
                supported_powerhint_map_[name_status_pair.first][ThrottlingSeverity::NONE] =
                        ThrottlingSeverity::NONE;
                continue;
            }

            bool isSupported = false;
            ndk::ScopedAStatus isSupportedResult;

            if (power_hal_service_.isPowerHalExtConnected()) {
                isSupported = power_hal_service_.isModeSupported(name_status_pair.first, severity);
            }
            if (isSupported)
                current_severity = severity;
            supported_powerhint_map_[name_status_pair.first][severity] = current_severity;
        }
    }
}

void ThermalHelper::sendPowerExtHint(const Temperature_2_0 &t) {
    std::lock_guard<std::shared_mutex> lock(sensor_status_map_mutex_);
    if (!isAidlPowerHalExist())
        return;

    if (!sensor_info_map_.at(t.name).send_powerhint)
        return;

    ThrottlingSeverity prev_hint_severity;
    prev_hint_severity = sensor_status_map_.at(t.name).prev_hint_severity;
    ThrottlingSeverity current_hint_severity = supported_powerhint_map_[t.name][t.throttlingStatus];

    if (prev_hint_severity == current_hint_severity)
        return;

    if (prev_hint_severity != ThrottlingSeverity::NONE) {
        power_hal_service_.setMode(t.name, prev_hint_severity, false);
    }

    if (current_hint_severity != ThrottlingSeverity::NONE) {
        power_hal_service_.setMode(t.name, current_hint_severity, true);
    }

    sensor_status_map_[t.name].prev_hint_severity = current_hint_severity;
}
}  // namespace implementation
}  // namespace V2_0
}  // namespace thermal
}  // namespace hardware
}  // namespace android